RESUMO
OBJECTIVES: This study aimed to check the status of the contact investigation in congregate settings to eradicate tuberculosis (TB) in the Republic of Korea. METHODS: The "Integrated System for Disease and Public Health Management" is used for care and follow-up for patients and contacts of TB. We downloaded data for contact investigations conducted from January to December 2013. RESULTS: A total of 1,200 contact investigations in congregate settings were carried out by 25 field investigators in 2013. We performed the status of contact investigation, TB, and LTBI rate by age, accept rate of LTBI treatment, and complete rate of LTBI treatment during 2013. A total of 1,547 index TB patients, 149,166 contacts, and 259 additional TB patients were found through the investigation. Kindergartens showed the highest LTBI rate, 19.8%, among educational facilities. The second highest was in elementary schools and the subtotal LTBI rate of educational facilities was 7.8%. Social welfare/correctional facilities and workplaces showed relatively high LTBI rates of 23.8% and 23.6%, respectively. By age, individuals >35 years showed the highest LTBI rate, followed by those aged 0-4 years, 30-34 years, and 5-9 years, with rates of 18.1%, 16.4%, and 15.4% respectively. When comparing the tuberculin skin test (TST) positive conversion ratio by facility, middle school and high school were relatively high compared to the others. The accept rate of LTBI treatment in the workplace was lowest at 63% and the complete rate in elementary schools was lowest at 76.5%. CONCLUSION: TB contact investigation is considered as a meaningful strategy for preventing TB outbreaks in congregate settings and decreasing the prevalence of TB in young people. Results of this study could be used to establish the LTBI management policy.
RESUMO
The laser generation method of focused-Lamb wave is expected to have high defect-detection ability with advantages of non-contact testing. In this method, the laser beam is illuminated on the surface of the object through an arrayed-arc slit, and then the energy of the generated Lamb wave is concentrated on the focus point of arc. This focusing effect enables the concentration of higher wave intensity on the focus with better S/N ratio of signal, and has better spatial resolution compared to the conventional line arrayed method. This paper describes a 2-D imaging system using this laser generated, focused-Lamb wave combined with its detection by the air-coupled transducer. This technique is fully non-contact so it can be easily applied for the automatic inspection. The effectiveness of the proposed method was verified by experiments on a 1-mm thick aluminum plate with artificial drill-hole defect with diameters of 1mm. The 2-D image of was constructed by scanning and the result showed that the location and size of defects were clearly detected.
