RESUMO
Techniques for wavefront improvement in an end-pumped Nd:YAG zigzag slab laser amplifier were proposed and demonstrated experimentally. First, a study on the contact materials was conducted to improve the heat transfer between the slab and cooling blocks and to increase the cooling uniformity. Among many attempts, only the use of silicon oil showed an improvement in the wavefront. Thus, the appropriate silicone oil was applied to the amplifier as a contact material. In addition, the wavefront compensation method using a glass rod array was also applied to the amplifier. A very low wavefront distortion was obtained through the use of a silicone-oil contact and glass rod array. The variance of the optical path difference for the entire beam height was 3.87 µm at a pump power of 10.6 kW, and that for the 80% section was 1.69 µm. The output power from the oscillator was 3.88 kW, which means the maximum output extracted from the amplifier at a pump power of 10.6 kW.
RESUMO
We report the observation of transverse mode instability (TMI) in a pulsed single-frequency ytterbium-doped large-core fiber amplifier in which stimulated Brillouin scattering (SBS) is generated easily owing to the high peak power and narrow linewidth of the laser pulses. It was shown experimentally that the threshold of TMI is almost the same as that of SBS and that the suppression of SBS also increases the threshold of TMI, which indicates that the TMI originates from SBS in the fiber.
RESUMO
We have generated continuous-wave single-frequency 1.5 W 378 nm radiation by frequency doubling a high-power Ti:sapphire laser in an external enhancement cavity. An LBO crystal that is Brewster-cut and antireflection coated on both ends is used for a long-term stable frequency doubling. By optimizing the input coupler's reflectivity, we could generate 1.5 W 378 nm radiation from a 5 W 756 nm Ti:sapphire laser. According to our knowledge, this is the highest CW frequency-doubled power of a Ti:sapphire laser.
RESUMO
We have developed a 5-W 756-nm injection-locked Ti:sapphire laser and frequency-doubled it in an external enhancement cavity for the generation of watt-level 378-nm single-frequency radiation, which is essential for isotope-selective optical pumping of thallium atoms. With a lithium triborate (LBO) crystal in the enhancement cavity, 1.1 W at 378 nm was coupled out from the cavity. Such results are to our knowledge the highest powers of continuous-wave single-frequency radiation generated from a Ti:sapphire laser and its frequency doubling.
Assuntos
Óxido de Alumínio , Desenho Assistido por Computador , Lasers , Modelos Teóricos , Titânio , Simulação por Computador , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
We have developed a 756 nm, 3 W single-frequency cw Ti:sapphire laser by using the technique of injection locking. A cw Ti:sapphire laser in a ring-type configuration was forced to lase unidirectionally by use of an optical diode to prevent a high-power backward laser from disturbing the injection laser. A master laser was amplified by a broad-area laser diode and coupled into a single-mode fiber to generate a 50 mW injection laser with a Gaussian beam profile, which was enough to lock the Ti:sapphire laser at full power of 3 W. Such a high-power single-frequency Ti:sapphire laser enables a watt-level blue or near-ultraviolet single-frequency laser to be generated by frequency doubling.