Solution-Grown Homojunction Oxide Thin-Film Transistors.

Growing attention has been given to low temperature, solution-processed metal oxide thin-film transistors because they can be applied in the emerging sector of flexible and large-scale electronics. However, major obstacles of solution-grown devices, such as their relatively low field-effect mobility and the difficulty of controlling carrier concentration, limit the further advancement of the electronics. Here, we overcome these constraints through a newly renovated structure, called a "homojunction", consisting of double-stacked semiconductors with same material. The homojunction oxide thin-film transistor has remarkable electrical performance with controllability, for example, tunable turn-on voltage (-80 V to -8 V) and high average field-effect mobility (∼50 cm2/V·s) are obtained via a low annealing temperature process (250 °C). Furthermore, notable achievements associated with stability, reliability, and uniformity are verified. These results are attributed to the unique phenomena of solution-grown thin films: the change of both chemical and physical properties of thin films. Our findings highlight that the thin films of high quality can be yielded through the solution process at low annealing temperatures, and thus solution-grown transistors hold great promise for widespread industrial applications.

Effects of Unusual Gate Current on the Electrical Properties of Oxide Thin-Film Transistors.

The wide research and development on oxide thin-film transistors (TFTs) have led to considerable changes in mainstream technology in various electronic applications. Up to now, much research has been focusing on enhancing the performance of oxide TFTs and simplifying fabricating process. At the stage of research and development in the oxide TFT, unexpectedly high gate current phenomena have been continuously reported by several groups, but the origins have not been yet studied in detail. The unusual gate current interferes with the conductance of the oxide TFT, which makes it difficult to interpret the performance of the TFT. Here we present the origin and control factors of the unconventional gate currents flow in the oxide TFT. The gate current is due to the conduction of electrons through trap sites in insulators, and the current is sophisticatedly controlled by the structural factors of TFT. Furthermore, the gate current flows only in one direction due to the charge state of the oxide semiconductor at the interface with the insulator. We also demonstrate that the vertical current path functions as a diode unit can protect the TFT from unintended gate electrostatic shock.

Effective Atmospheric-Pressure Plasma Treatment toward High-Performance Solution-Processed Oxide Thin-Film Transistors.

Solution-processed oxide semiconductors (OSs) have attracted much attention because they can simply, quickly, and cheaply produce transparent channels on flexible substrates. However, despite such advantages, in the fabrication process of OS thin-film transistors (TFTs) using the solution process, it is a fatal problem that there are hardly any ways to simply and effectively control important TFT parameters, including the turn-on voltage ( Von) and on/off current ratio. For the practical application of solution-processed OS TFT, approaches to simply and effectively control the parameters are urgently required. Here, we newly propose an atmospheric-pressure plasma (APP) treatment that can simply and effectively control the electrical properties in solution-processed InO x TFTs. Through exposure of APP, we successfully realized the changes in important TFT parameters of solution-processed InO x TFT, Von from -11.4 to -1.9 V and the on/off current ratio from ∼103 to ∼106, which still keep up the high field-effect mobility (>20 cm2 V-1 s-1). On the basis of various analyses such as X-ray-based analysis and UV-visible spectroscopy, we identified that the APP treatment can effectively control oxygen vacancy and carrier concentration in solution-processed OS.

Vertical Transport Control of Electrical Charge Carriers in Insulator/Oxide Semiconductor Hetero-structure.

The technology for electrical current passing through an insulator thin-film between two electrodes is newly getting spotlights for substantial potentials toward advanced functional devices including a diode and a resistive switching device. However, depending on an electrode-limited conduction mechanisms of the conventional devices, a narrow processing window for a thickness of the insulator thin-film and an inability to control a magnitude and direction of the currents are challenges to overcome. Herein, we report a new approach to enable electrical charge carriers to pass stably through a relatively-thick insulator layer and to control a magnitude and polarity of the currents by applying an oxide semiconductor electrode in a metal/insulator/metal structure. We reveal that the electrical conduction in our devices follows a space charge-limited conduction mechanism which mainly depends on the charge carriers injected from contacts. Therefore, characteristics of the current including a current value and a rectification ratio of input signal are precisely controlled by electrical properties of the oxide semiconductor electrode. The unique current characteristics in metal/insulator/oxide semiconductor structures give extendable inspirations in electronic materials science, even a prominent solution for various technology areas of electronics.

Strong Influence of Humidity on Low-Temperature Thin-Film Fabrication via Metal Aqua Complex for High Performance Oxide Semiconductor Thin-Film Transistors.

Oxide semiconductors thin film transistors (OS TFTs) with good transparency and electrical performance have great potential for future display technology. In particular, solution-processed OS TFTs have been attracted much attention due to many advantages such as continuous, large scale, and low cost processability. Recently, OS TFTs fabricated with a metal aqua complex have been focused because they have low temperature processability for deposition on flexible substrate as well as high field-effect mobility for application of advanced display. However, despite some remarkable results, important factors to optimize their electrical performance with reproducibility and uniformity have not yet been achieved. Here, we newly introduce the strong effects of humidity to enhance the electrical performance of OS TFTs fabricated with the metal aqua complex. Through humidity control during the spin-coating process and annealing process, we successfully demonstrate solution-processed InOx/SiO2 TFTs with a good electrical uniformity of ∼5% standard deviation, showing high average field-effect mobility of 2.76 cm2V-1s-1 and 15.28 cm2V-1s-1 fabricated at 200 and 250 °C, respectively. Also, on the basis of the systematic analyses, we demonstrate the mechanism for the change in electrical properties of InOx TFTs depending on the humidity control. Finally, on the basis of the mechanism, we extended the humidity control to the fabrication of the AlOx insulator. Subsequently, we successfully achieved humidity-controlled InOx/AlOx TFTs fabricated at 200 °C showing high average field-effect mobility of 9.5 cm2V-1s-1.

Direct electron injection into an oxide insulator using a cathode buffer layer.

Injecting charge carriers into the mobile bands of an inorganic oxide insulator (for example, SiO2, HfO2) is a highly complicated task, or even impossible without external energy sources such as photons. This is because oxide insulators exhibit very low electron affinity and high ionization energy levels. Here we show that a ZnO layer acting as a cathode buffer layer permits direct electron injection into the conduction bands of various oxide insulators (for example, SiO2, Ta2O5, HfO2, Al2O3) from a metal cathode. Studies of current-voltage characteristics reveal that the current ohmically passes through the ZnO/oxide-insulator interface. Our findings suggests that the oxide insulators could be used for simply fabricated, transparent and highly stable electronic valves. With this strategy, we demonstrate an electrostatic discharging diode that uses 100-nm SiO2 as an active layer exhibiting an on/off ratio of ∼10(7), and protects the ZnO thin-film transistors from high electrical stresses.

All-solution-processed transparent thin film transistor and its application to liquid crystals driving.

All-solution-processed transparent thin film transistors (TTFTs) are demonstrated with silver grid source/drain electrodes, which are fabricated by printing and subsequent silver nanoparticles solution coating, which allows continuous processing without using high vacuum systems. The silver grid electrode shows a reasonable transmittance in visible range, moderate electrical conductance and mechanical strength. The TTFTs are employed to drive liquid crystal cells and demonstrate a successful switching operation.

UV-visible spectroscopic analysis of electrical properties in alkali metal-doped amorphous zinc tin oxide thin-film transistors.

Solution-processed and alkali metals, such as Li and Na, are introduced in doped amorphous zinc tin oxide (ZTO) semiconductor TFTs, which show better electrical performance, such as improved field effect mobility, than intrinsic amorphous ZTO semiconductor TFTs. Furthermore, by using spectroscopic UV-visible analysis we propose a comprehensive technique for monitoring the improved electrical performance induced by alkali metal doping in terms of the change in optical properties. The change in the optical bandgap supported by the Burstein-Moss theory could successfully show a mobility increase that is related to interstitial doping of alkali metal in ZTO semiconductors.