Photon-induced deactivations of multiple traps in CH3NH3PbI3 perovskite films by different photon energies.

Photon-induced trap deactivation is commonly observed in organometal halide perovskites. Trap deactivation is characterized by an obvious photoluminescence (PL) enhancement. In this work, the properties of traps in CH3NH3PbI3 perovskite films were studied based on the PL enhancement excited by lasers of different wavelengths (633 nm and 405 nm). Two types of electron traps were identified; one can be deactivated by both 633 nm and 405 nm illuminations, whereas the other one can only be deactivated by 405 nm illumination. The energy levels of both types of traps were beneath the conduction band minimum. The expressions of the PL enhancement kinetics due to the trap deactivations by lasers of different wavelengths were derived. The ratio of the constants of the radiative recombination rate and the initial capture rates for both traps was determined from the PL enhancement. The trap deactivation was a photon-related process rather than a photocarrier-related process, and the deactivation time was inversely proportional to the photon flux density.

Studies on the substrate-dependent photocatalytic properties of Cu2O heterojunctions.

Cu2O is a promising material for photocatalysis because of its absorption ability in the ultraviolet (UV)-visible light range. Cu2O deposited on conductive Ti and fluorine-doped tin oxide (FTO) substrates behaves as a photocathode. Cu2O deposited on an n-type semiconductor such as TiO2 nanotube arrays (TNA)/Ti behaves as a photoanode and has demonstrated better photocatalytic activity than that of TNA/Ti. The substrate-dependent photocatalytic properties of Cu2O heterojunctions are not well studied. In this work, the photocatalytic properties of a Cu2O/TNA/Ti junction as a photoanode and of Cu2O/Ti and Cu2O/FTO junctions as photocathodes without bias were systematically studied to understand their performance. The Cu2O/TNA/Ti photoanode exhibited higher photocurrent spectral responses than those of Cu2O/Ti and Cu2O/FTO photocathodes. The photoanodic/photocathodic properties of those junctions were depicted in their energy band diagrams. Time-resolved photoluminescence indicated that Cu2O/TNA/Ti, Cu2O/Ti, and Cu2O/FTO junctions did not enhance the separation of photogenerated charges. The improved photocatalytic properties of Cu2O/TNA/Ti compared with TNA/Ti were mainly attributed to the UV-visible light absorption of Cu2O.

Stereoselective Iterative Convergent Synthesis of Z-Oligodiacetylenes from Propargylic Dithioacetals.

A series of (t)Bu-substituted Z-oligodiacetylenes (Z-ODAs) are synthesized from the reactions of allenyl/propargylic zinc reagents, obtained from the corresponding propargylic dithiolanes and BuLi, with dithiolane-substituted propargylic aldehydes followed by stereospecific elimination of ß-thioalkoxy alcohols under Mitsunobu conditions. The stereochemical assignments are based on NOE experiments. The X-ray structure of the hexamer further supports the Z configuration for each of the double bonds in these ODAs. The photophysical properties of these Z-ODAs have been examined and are compared with known related E- and Z-ODAs with different substituents.

Excimer formation in a confined space: photophysics of ladderphanes with tetraarylethylene linkers.

Communication between chromophores is vital for both natural and non-natural photophysical processes. Spatial confinements offer unique conditions to scrutinize such interactions. Polynorbornene- and polycyclobutene-based ladderphanes are ideal model compounds in which all tetraarylethylene (TAE) linkers are aligned coherently. The spans for each of the monomeric units in these ladderphanes are 4.5-5.5 Å. Monomers do not exhibit emission, because bond rotation in TAE can quench the excited-state energy. However, polymers emit at 493 nm (Φ=0.015) with large Stokes shift under ambient conditions and exhibit dual emission at 450 and 493 nm at 150 K. When the temperature is lowered, the emission intensity at 450 nm increases, whereas that at 493 nm decreases. At 100 K, both monomers and polymers emit only at 450 nm. This shorter-wavelength emission arises from the intrinsic emission of TAE chromophore, and the emission at 493 nm could be attributed to the excimer emission in the confined space of ladderphanes. The fast kinetics suggest diffusion-controlled formation of the excimer.

Observation of protein folding/unfolding dynamics of ubiquitin trapped in agarose gel by single-molecule FRET.

A ubiquitin mutant with two Cys mutations, m[C]q/S65C, was site-specifically labeled with two dye molecules, Alexa Fluor 488 (donor) and Alexa Fluor 594 (acceptor), due to the different reactivity of these two Cys residues. This doubly dye-labeled ubiquitin has lower structural stability than wild-type ubiquitin. Taking advantage of this decreased stability, conformational heterogeneity of this protein under nondenaturing condition was observed at the single-molecule level using single-paired Förster resonance energy transfer (FRET) by trapping the protein in agarose gel. Three conformational populations corresponding to folded (E (ET) ≈ 0.95), loosely packed (E (ET) ≈ 0.72), and unfolded (E (ET) ≈ 0.22) structures, and the structural transitions between them were observed. Our results suggest that agarose immobilization is good for observing structural dynamics of proteins under native condition.

Folding of alternating dialkylsilylene-spaced donor-acceptor copolymers: the oligomer approach.

A series of oligmers with donor-acceptor pairs separated by diisopropylsilylene (iPr(2)Si) spacers, composed of monomer 4b, dimer 5, trimer 6, and tetramer 7, were synthesized to scrutinize the folding behavior. Monomer 4a with a dimethylsilylene (Me(2)Si) spacer was also prepared for comparison. The 4-aminostyrene moiety was used as the donor and the stilbene moiety as the acceptor. Both steady-state and time-resolved fluorescence spectroscopic measurement were made. Regardless of the substituents on the silicon atom, the emission spectra of 4a and 4b exhibit both local excited (LE) emission of the acceptor chromophore and emission from the charge-separated state (CT emission), which are similar to that of the corresponding Me(2)Si-spaced copolymer 2a with the same donor and acceptor chromophores, but different from that of the copolymer with the iPr(2)Si spacer 2b. Dimer 5 behaves like 4 and 2a. As the chain length of the oligomers increases, the emission properties of the higher homologues become prone to that of 2b. Thus, tetramer 7 exhibits emission from the charge-transfer complex, which is essentially same as that of 2b. Moreover, charge-transfer absorptions emerge in 6 and 7. These results suggest that the folding nature of oligomers approaches that of the corresponding polymer, as the degree of oligomerization increases, and the electronic interactions between adjacent donor-acceptor pairs are controlled by the steric effect of the substituents on the silicon atoms and concomitant amplification of the stabilizing energy by extending the distance of the folding structure.

Controlling conformations in alternating dialkylsilylene-spaced donor-acceptor copolymers by a cooperative Thorpe-Ingold effect and polymer folding.

A series of dialkylsilylene-spaced copolymers 6 and 7, which contain Me(2)Si and iPr(2)Si spacer groups, respectively, and have alternating donor and acceptor chromophores, have been designed and regioselectively synthesized by hydrosilylation. The ratio of the donor and acceptor chromophores for each repeat unit is 2:1, and the two donor chromophores are linked by a trimethylene bridge. A 4-aminostyrene moiety is used as the donor and a series of acceptor chromophores with different reduction potentials are employed. Both steady-state and kinetic measurements reveal that the photoinduced electron transfer (PET) in 6 obeyed the Marcus theory in which normal and inverted regions are observed. On the other hand, the iPr(2)Si-spaced copolymers 7 exhibit absorption and emission from the charge-transfer complexes exclusively due to ground-state interactions between the donor and acceptor chromophores. The discrepancy in photophysical behavior may have arisen from the difference in distance between the adjacent donor and acceptor chromophores. The bulkiness of the substituents on the silicon atom (i.e., Me versus iPr) may exert the Thorpe-Ingold effect on the local conformation around the silicon atom. The differences in the small energetic barriers for each of the conformational states may be amplified by extending the distance of the folding structure, which results in perturbing the conformation of the polymers. These results suggest that the electronic interactions between adjacent donor-acceptor pairs in these copolymers are controlled by the synchronization of the substitution effect and corresponding polymeric structures.

Polarization modulation spectroscopy of single fluorescent nanodiamonds with multiple nitrogen vacancy centers.

A technique based on polarization modulation spectroscopy (PMS) has been developed to determine quantitatively the number of fluorophores in nanoparticles at the single-molecule level. The technique involves rotation of the polarization of the excitation laser on a millisecond time scale, leading to fluorescence intensity modulation. By taking account of the heterogeneous orientation among the dipoles of the fluorophores and simulating the modulation depth distribution with Monte Carlo calculations, we show that it is possible to deduce the ensemble average and number distribution of the fluorophores. We apply the technique to fluorescent nanodiamonds (FNDs) containing multiple nitrogen vacancy (NV) centers. Comparing the experimental and simulated modulation depth distributions of 11 nm FNDs, we deduce an average number of = 3, which is in good agreement with independent photon correlation measurements. The method is general, rapid, and applicable to other nanoparticles, polymers, and molecular complexes containing multiple and randomly orientated fluorophores as well.

Supramolecular porphyrin-DABCO array in single- and double-stranded polynorbornenes.

Zinc-porphyrin-appended norbornene derivative 6, the corresponding dimer 7, coherently aligned single-stranded polynorbornene 5, and zinc-porphyrin-linked double-stranded polymeric ladderphane 3 have been used for complexation with 1,4-diazabicyclo[2.2.2]octane (DABCO) to generate an array of porphyrin-DABCO supramolecular scaffolds. The stoichiometries of the complex formation are analyzed in detail by (1)H NMR spectroscopy as well as absorption and emission spectroscopic methods. Bidentate ligand DABCO is found to form with 7, 5, and 3 to give 2-to-1 porphyrin-DABCO sandwich structures. Monomer 6, on the other hand, forms a 2-to-1 porphyrin-DABCO sandwich structure at high concentration (20 mM), but a 1-to-1 porphyrin-DABCO complex at low concentration (10(-6) M). Time-resolved fluorescence decays revealed a similar behavior for the 2-to-1 porphyrin-DABCO sandwich structures that are formed from 3, 5, and 7.

Hydrogen-bonding induced cooperative effect on the energy transfer in helical polynorbornenes appended with porphyrin-containing amidic alanine linkers.

Polynorbornenes appended with porphyrins containing a range of different linkers are synthesized. The use of bisamidic chiral alanine linkers between the pending porphyrins and the polymeric backbone has been shown to bring the adjacent porphyrin chromophores to more suitable orientation for exciton coupling owing to hydrogen bonding between the adjacent linkers. The hydrogen bonding between the adjacent pendants in these polymers may induce a cooperative effect and therefore render single-handed helical structures for these polymers. Such a cooperative effect is reflected in the enhancement of FRET efficiencies between zinc-porphyrin and free base porphyrin in random copolymers.

Polymeric ladderphanes.

A new class of polymers, which have a double-stranded polybinorbornene skeleton with multilayer planar oligoaryl linkers, defined as polymeric ladderphanes, are synthesized. The structures of these ladderphanes are determined by spectroscopic means. Photophysical studies and time-resolved fluorescence spectroscopic investigations reveal that there is a strong interaction between the chromophore linkers. Thus, Soret band splitting in the absorption spectrum of the polymer with porphyrin linker (12e), significant fluorescence quenching with oligoaryl linkers (12b-d), and excimer emission with a terphenylene-diethynylene linker (12a) are characteristic photophysical properties of these polymers. Scanning tunneling microscopy shows that polymers 12b and d exhibit a ladder-like morphology and form a supramolecular assembly leading to a two-dimensional ordered array on a highly oriented pyrolytic graphite surface.

Coherently aligned porphyrin-appended polynorbornenes.

Six different kinds of coherently aligned porphyrin-appended polynorbornenes derived from 5,6-endo-fused N-arylpyrrolidenonorbornenes have been synthesized. Pi-pi interactions between the pendant groups are essential for dictating the photophysical properties of the polymers and the mechanism for the stereoselective formation of polymers. Splitting of the Soret band of polymers 2a-c, which have alkyl-substituted porphyrin pendant groups, suggests strong exciton coupling between chromophores. No splitting of the Soret band is observed for polymers 2d-f, which have tetraaryl substituents on the porphyrin moiety. Significant fluorescence quenching is found in polymers 2a-e, whereas only slightly reduced quantum yield is observed for 2f. Time-resolved fluorescence measurements also indicate a similar trend. The AFM image of 2d on graphite shows aggregation to form a two-dimensional, ordered pattern.

Fluorescence enhancement and lifetime modification of single nanodiamonds near a nanocrystalline silver surface.

Fluorescent nanodiamond (FND) contains nitrogen-vacancy defect centers as fluorophores. The intensity of its fluorescence can be significantly enhanced after deposition of the particle (35 or 140 nm in size) on a nanocrystalline Ag film without a buffer layer. The excellent photostability (i.e. neither photobleaching nor photoblinking) of the material is preserved even on the Ag film. Concurrent decrease of excited state lifetimes and increase of fluorescence intensities indicate that the enhancement results from surface plasmon resonance. Such a fluorescence enhancement effect is diminished when the individual FND particle is wrapped around by DNA molecules, as a result of an increase in the distance between the color-center emitters inside the FND and the nearby Ag nanoparticles. A fluorescence intensity enhancement up to 10-fold is observed for 35 nm FNDs, confirmed by fluorescence lifetime imaging microscopy.

A new amyloid-like beta-aggregate with amyloid characteristics, except fibril morphology.

Amyloid plaques, formed from amyloid beta (Abeta) peptides (mainly Abeta40 or Abeta42), are one of the most important pathological characteristics of Alzheimer's disease. Here, a single D-form proline substitution in the 40-amino-acid Abeta40 peptide can totally change the aggregation behavior of this peptide. The residue immediately preceding each glycine in Abeta40 (S8, V24, I32, and V36) was individually replaced by D-form proline ((D)Pro). The resulting (D)P-G sequence (the (D)Pro residue and the following Gly residue) was designed as a "structural clip" to force the formation of a bend in the peptide, as this sequence has been reported to be a strong promoter of beta-hairpin formation. The mutant peptide with Val24-to-(D)Pro substitution, named V24P, formed a new amyloid-like beta-aggregate at high peptide concentration. The aggregate has most of the characteristics of amyloid fibrils, except fibril morphology. Moreover, the mutant peptide V24P, when mixed with Abeta40, can attenuate the cytotoxicity of Abeta40.

Mass production and dynamic imaging of fluorescent nanodiamonds.

Fluorescent nanodiamond is a new nanomaterial that possesses several useful properties, including good biocompatibility, excellent photostability and facile surface functionalizability. Moreover, when excited by a laser, defect centres within the nanodiamond emit photons that are capable of penetrating tissue, making them well suited for biological imaging applications. Here, we show that bright fluorescent nanodiamonds can be produced in large quantities by irradiating synthetic diamond nanocrystallites with helium ions. The fluorescence is sufficiently bright and stable to allow three-dimensional tracking of a single particle within the cell by means of either one- or two-photon-excited fluorescence microscopy. The excellent photophysical characteristics are maintained for particles as small as 25 nm, suggesting that fluorescent nanodiamond is an ideal probe for long-term tracking and imaging in vivo, with good temporal and spatial resolution.

Strategy for efficient site-specific FRET-dye labeling of ubiquitin.

To study conformational changes within a single protein molecule, sp-FRET (single pair fluorescence resonance energy transfer) is an important technique to provide distance information. However, incorporating donor and acceptor dyes into the same protein molecule is not an easy task. Here, we report a strategy for the efficient double-labeling of a protein on a solid support. An ubiquitin mutant with two Cys mutations, one with high solvent accessibility and the other with low solvent accessibility, was constructed. The protein was bound to magnetic beads and reacted with the dyes. The first dye reacted with the side-chain of the Cys with the high solvent accessibility and the second with the other Cys under partially denaturing conditions. Using this method, we can easily label two dyes in a site-specific way on ubiquitin with a satisfied yield. The labeling sites for donor and acceptor dyes can be easily swapped.

Combining light harvesting and electron transfer in silica-titania-based organic-inorganic hybrid materials.

A convenient protocol to fabricate an organic-inorganic hybrid system with covalently bound light-harvesting chromophores (stilbene and terphenylene-divinylene) and an electron acceptor (titanium oxide) is described. Efficient energy- and electron-transfer processes may take place in these systems. Covalent bonding between the acceptor chromophores and the titania/silica matrix would be important for electron transfer, whereas fluorescence resonant energy transfer (FRET) would strongly depend on the ratio of donor to acceptor chromophores. Time-resolved spectroscopy was employed to elucidate the detailed photophysical processes. The coupling of FRET and electron transfer was shown to work coherently to lead to photocurrent enhancement. The photocurrent responses reached a maximum when the hybrid-material thin film contained 60 % acceptor and 40 % donor.

Thorpe-Ingold effect on the conformation and photophysical properties of dialkylsilylene-spaced divinylarene copolymers.

Geminal disubstitution on silicon in dialkylsilylene-spaced divinylarene copolymers may dictate the conformation and photophysical properties of the copolymers, bulky (i)Pr substituted copolymers being more folded than Me substituent analogues.

Direct measurements of intersystem crossing rates and triplet decays of luminescent conjugated oligomers in solutions.

Photothermal calorimetry and fluorescence spectroscopy were used to determine the relaxations of the photoexcited singlet state of two PPV and polyfluorene oligomers, (E,E)-1,4-bis[(2-benzyloxy)styryl]benzene (PVDOP) and ter(9,9'-spirobifluorene) (TSBF). The decay rates of different S1 relaxation channels, which include intersystem crossing (ISC), radiative, and nonradiative decay can be determined by the combination of photoacoustic calorimetry (PAC) and the time-correlated single photon counting (TCSPC) technique. The triplet state energy level is determined by the phosphorescence (Ph) spectra recorded at 77 K. The ISC yields are approximately 3% and 6% for PVDOP and TSBF, respectively. The T1 to S0 transition decay rate is acquired by PAC and photothermal beam deflection (PBD) measurements. The triplet state decay rate is 17 and 21 ms(-1) at room temperature. The Ph intensity decay at 77 K shows that the triplet state lifetime increases by 4 orders of magnitude, as compared to room temperature.

Characterization and application of single fluorescent nanodiamonds as cellular biomarkers.

Type Ib diamonds emit bright fluorescence at 550-800 nm from nitrogen-vacancy point defects, (N-V)(0) and (N-V)(-), produced by high-energy ion beam irradiation and subsequent thermal annealing. The emission, together with noncytotoxicity and easiness of surface functionalization, makes nano-sized diamonds a promising fluorescent probe for single-particle tracking in heterogeneous environments. We present the result of our characterization and application of single fluorescent nanodiamonds as cellular biomarkers. We found that, under the same excitation conditions, the fluorescence of a single 35-nm diamond is significantly brighter than that of a single dye molecule such as Alexa Fluor 546. The latter photobleached in the range of 10 s at a laser power density of 10(4) W/cm(2), whereas the nanodiamond particle showed no sign of photobleaching even after 5 min of continuous excitation. Furthermore, no fluorescence blinking was detected within a time resolution of 1 ms. The photophysical properties of the particles do not deteriorate even after surface functionalization with carboxyl groups, which form covalent bonding with polyL-lysines that interact with DNA molecules through electrostatic forces. The feasibility of using surface-functionalized fluorescent nanodiamonds as single-particle biomarkers is demonstrated with both fixed and live HeLa cells.