The Removal of Strontium Ions from an Aqueous Solution Using Na-A Zeolites Synthesized from Kaolin.

Sr2+ ions in an aqueous solution were removed using Na-A zeolites synthesized from kaolin, a natural mineral. Na-A zeolites with high crystallinity were synthesized using NaOH/kaolin mass ratios of 0.6 (ZK06) and 0.9 (ZK09). The adsorption reached equilibrium within 120 min. The adsorption data obtained from experiments for Sr2+ using ZK06 and ZK09 were appropriately analyzed with pseudo-second-order kinetic and Langmuir isotherm models. Comparing the maximum adsorption capacities (qm) of ZK06 and ZK09 for Sr2+, the highest values were obtained at 1.90 and 2.42 mmol/g, respectively. Consequently, the Na-A zeolites synthesized from kaolin can be evaluated as adsorbents with high adsorption capacities for the removal of Sr2+, proportional to the degree of their crystallinity.

Performance of composite mineral adsorbents for removing Cu, Cd, and Pb ions from polluted water.

This study evaluated the efficiency of the removal of heavy metals from contaminated water via adsorption isotherm and kinetic experiments on two composite mineral adsorbents, CMA1 and CMA2. The developed CMA1 (zeolite with clinoptilolite of over 20 weight percent and feldspar of ~10 percent, with Portland cement) and CMA2 (zeolite with feldspar of over 15 weight percent and ~9 percent clinoptilolite, with Portland cement) were applied to remove Cu, Cd, and Pb ions. Based on the adsorption isotherm and kinetic experiments, the adsorbents CMA1 and CMA2 exhibited high removal efficiency for Cu, Cd, and Pb ions in solution compared to other adsorbents. In the adsorption kinetic experiment, CMA2 demonstrated better adsorption than CMA1 with the same initial concentration and reaction time, and Cu, Cd, and Pb ions almost reached equilibrium within 180 min for both CMA1 and CMA2. The results of the adsorption kinetic experiments with pseudo-first-order (PFO) and pseudo-second-order (PSO) models indicated that the PSO model was more suitable than the PFO model. Comparing the Langmuir and Freundlich adsorption isotherm models, the former showed a very slightly higher correlation coefficient (r2) than the latter, indicating that the two models can both be applied to heavy metal solutions on a spherical monolayer surface with a weak heterogeneity of the surface. Additionally, the adsorbents CMA1 and CMA2 demonstrated different removal abilities depending on which heavy metals were used.