RESUMO
The polarizability of atoms and molecules gives rise to optical forces that trap particles and a refractive index that guides light beams, potentially leading to a self-guided laser and particle beam propagation. In this paper, the mutual interactions between an expanding particle beam and a diffracting light beam are investigated using an axisymmetric particle-light coupled simulation. The nonlinear coupling between particles and photons is dependent on the particle beam radius, particle density, particle velocity and temperature, polarizability, light beam waist, light frequency (with respect to the resonance frequency), and light intensity. The computational results show that the maximum propagation distance is achieved when the waveguiding effect is optimized to single-mode operation. The application of the coupled beam propagation as a space propulsion system is discussed.
RESUMO
Mode-resolved characterization of a nanosecond pulsed optical parametric oscillator (OPO) has been performed with a cross-dispersed virtually imaged phased array (VIPA) spectrometer during both free-running and partially injection-seeded operation. The spectrometer is designed around a 0.5 cm-1 VIPA element with a measured spectral resolution of 220 MHz and a range of over 60 cm-1. Full high-resolution lineshape measurements are obtained covering over 600 oscillating cavity modes on a commercial type I beta barium borate OPO during operation of the signal beam near 632.8 nm. Mean and fluctuating mode intensities are found to agree with previous studies of ultra-short OPO resonators. Furthermore, modulation of the broadband output due to the étalon characteristics of the nonlinear crystal produces clear fringes on the output lineshape, which have been observed for the first time, to the best of our knowledge. Future application of VIPA spectrometers to pulsed OPOs will allow previously unattainable characterization of the entire OPO lineshape and enable monitoring and optimization of OPO spectral purity.
RESUMO
The present contribution examines the impact of plasma dynamics and plasma-driven fluid dynamics on the flame growth of laser ignited mixtures and shows that a new dual-pulse scheme can be used to control the kernel formation process in ways that extend the lean ignition limit. We perform a comparative study between (conventional) single-pulse laser ignition (λ = 1064 nm) and a novel dual-pulse method based on combining an ultraviolet (UV) pre-ionization pulse (λ = 266 nm) with an overlapped near-infrared (NIR) energy addition pulse (λ = 1064 nm). We employ OH* chemiluminescence to visualize the evolution of the early flame kernel. For single-pulse laser ignition at lean conditions, the flame kernel separates through third lobe detachment, corresponding to high strain rates that extinguish the flame. In this work, we investigate the capabilities of the dual-pulse to control the plasma-driven fluid dynamics by adjusting the axial offset of the two focal points. In particular, we find there exists a beam waist offset whereby the resulting vorticity suppresses formation of the third lobe, consequently reducing flame stretch. With this approach, we demonstrate that the dual-pulse method enables reduced flame speeds (at early times), an extended lean limit, increased combustion efficiency, and decreased laser energy requirements.
RESUMO
A novel cavity-enhanced laser diagnostic has been developed to perform point measurements of spontaneous rotational Raman scattering. A narrow linewidth fiber laser source (1064 nm) is frequency locked to a high-finesse cavity containing the sample gas. Intracavity powers of 22 W are generated from 3.7 mW of incident laser power, corresponding to a buildup factor of 5900. A triple monochromator and a photomultiplier tube in counting mode are used to disperse and measure the scattering spectra. The system is demonstrated with rotational Raman spectra of nitrogen, oxygen, and carbon dioxide at atmospheric pressure. The approach will allow temporally and spatially resolved Raman measurements for combustion diagnostics and, by extending to higher power, Thomson scattering for diagnostics of low-density plasmas.
RESUMO
The study of pulsed laser- and microwave-induced plasma interactions with atmospheric and higher pressure combusting gases requires rapid diagnostic methods that are capable of determining the mechanisms by which these interactions are taking place. New rapid diagnostics are presented here extending the capabilities of Rayleigh and Thomson scattering and resonance-enhanced multi-photon ionization (REMPI) detection and introducing femtosecond laser-induced velocity and temperature profile imaging. Spectrally filtered Rayleigh scattering provides a method for the planar imaging of temperature fields for constant pressure interactions and line imaging of velocity, temperature and density profiles. Depolarization of Rayleigh scattering provides a measure of the dissociation fraction, and multi-wavelength line imaging enables the separation of Thomson scattering from Rayleigh scattering. Radar REMPI takes advantage of high-frequency microwave scattering from the region of laser-selected species ionization to extend REMPI to atmospheric pressures and implement it as a stand-off detection method for atomic and molecular species in combusting environments. Femtosecond laser electronic excitation tagging (FLEET) generates highly excited molecular species and dissociation through the focal zone of the laser. The prompt fluorescence from excited molecular species yields temperature profiles, and the delayed fluorescence from recombining atomic fragments yields velocity profiles.
