Functionalized Thienopyrazines on NiOx Film as Self-Assembled Monolayer for Efficient Tin-Perovskite Solar Cells Using a Two-Step Method.

Three functionalized thienopyrazines (TPs), TP-MN (1), TP-CA (2), and TPT-MN (3) were designed and synthesized as self-assembled monolayers (SAMs) deposited on the NiOx film for tin-perovskite solar cells (TPSCs). Thermal, optical, electrochemical, morphological, crystallinity, hole mobility, and charge recombination properties, as well as DFT-derived energy levels with electrostatic surface potential mapping of these SAMs, have been thoroughly investigated and discussed. The structure of the TP-MN (1) single crystal was successfully grown and analyzed to support the uniform SAM produced on the ITO/NiOx substrate. When we used NiOx as HTM in TPSC, the device showed poor performance. To improve the efficiency of TPSC, we utilized a combination of new organic SAMs with NiOx HTM, the TPSC device exhibited the highest PCE of 7.7% for TP-MN (1). Hence, the designed NiOx/TP-MN (1) acts as a new model system for the development of efficient SAM-based TPSC. To the best of our knowledge, the combination of organic SAMs with anchoring CN/CN or CN/COOH groups, and NiOx HTM for TPSC has never been reported elsewhere. The TPSC device based on the NiOx/TP-MN bilayer exhibits great enduring stability for performance, retaining ~80% of its original value for shelf storage over 4000 h.

Epitaxial Growth of Surface Perforations on Parallel Cylinders in Terraced Films of Block Copolymer/Homopolymer Blends.

Due to incommensurability between initial thickness and interdomain distance, thermal annealing inevitably produces relief surface terraces (islands and holes) of various morphologies in thin films of block copolymers. We have demonstrated three kinds of surface terraces in blend films: polygrain terraces with diffuse edges, polygrain terraces with step edges, and pseudo-monograin terraces with island coarsening. The three morphologies were obtained by three different thermal histories, respectively. The thermal histories were imposed on blend films, which were prepared by mixing a homopolystyrene (hPS, 6.1 kg/mol) with a weakly segregated, symmetry polystyrene-block poly(methyl methacrylate) (PS-b-PMMA, 42 kg/mol) followed by spin coating. At a given weight-fraction ratio of PS-b-PMMA/hPS = 75/25, the interior of the blend films forms parallel cylinders. Nevertheless, the surface of the blend films is always dominated by a skin layer of perforations, which epitaxially grow on top of parallel cylinders. By oxygen plasma etching at various time intervals to probe interior nanodomains, the epitaxial relationship between surface perforations and parallel cylinders has been identified by a scanning electron microscope.

Synergistic Interactions in Sequential Process Doping of Polymer/Single-Walled Carbon Nanotube Nanocomposites for Enhanced n-Type Thermoelectric Performance.

This study focuses on the fabrication of nanocomposite thermoelectric devices by blending either a naphthalene-diimide (NDI)-based conjugated polymer (NDI-T1 or NDI-T2), or an isoindigo (IID)-based conjugated polymer (IID-T2), with single-walled carbon nanotubes (SWCNTs). This is followed by sequential process doping method with the small molecule 4-(2,3-dihydro-1,3-dimethyl-1H-benzimidazol-2-yl)-N,N-dimethylbenzenamine (N-DMBI) to provide the nanocomposite with n-type thermoelectric properties. Experiments in which the concentrations of the N-DMBI dopant are varied demonstrate the successful conversion of all three polymer/SWCNT nanocomposites from p-type to n-type behavior. Comprehensive spectroscopic, microstructural, and morphological analyses of the pristine polymers and the various N-DMBI-doped polymer/SWCNT nanocomposites are performed in order to gain insights into the effects of various interactions between the polymers and SWCNTs on the doping outcomes. Among the obtained nanocomposites, the NDI-T1/SWCNT exhibits the highest n-type Seebeck coefficient and power factor of -57.7 µV K-1 and 240.6 µW m-1 K-2 , respectively. However, because the undoped NDI-T2/SWCNT exhibits a slightly higher p-type performance, an integral p-n thermoelectric generator is fabricated using the doped and undoped NDI-T2/SWCNT nanocomposite. This device is shown to provide an output power of 27.2 nW at a temperature difference of 20 K.

Unraveling the Structure-Property-Performance Relationships of Fused-Ring Nonfullerene Acceptors: Toward a C-Shaped ortho-Benzodipyrrole-Based Acceptor for Highly Efficient Organic Photovoltaics.

The high-performance Y6-based nonfullerene acceptors (NFAs) feature a C-shaped A-DA'D-A-type molecular architecture with a central electron-deficient thiadiazole (Tz) A' unit. In this work, we designed and synthesized a new A-D-A-type NFA, termed CB16, having a C-shaped ortho-benzodipyrrole-based skeleton of Y6 but with the Tz unit eliminated. When processed with nonhalogenated xylene without using any additives, the binary PM6:CB16 devices display a remarkable power conversion efficiency (PCE) of 18.32% with a high open-circuit voltage (Voc) of 0.92 V, surpassing the performance of the corresponding Y6-based devices. In contrast, similarly synthesized SB16, featuring an S-shaped para-benzodipyrrole-based skeleton, yields a low PCE of 0.15% due to the strong side-chain aggregation of SB16. The C-shaped A-DNBND-A skeleton in CB16 and the Y6-series NFAs constitutes the essential structural foundation for achieving exceptional device performance. The central Tz moiety or other A' units can be employed to finely adjust intermolecular interactions. The single-crystal X-ray structure reveals that ortho-benzodipyrrole-embedded A-DNBND-A plays an important role in the formation of a 3D elliptical network packing for efficient charge transport. Solution structures of the PM6:NFAs detected by small- and wide-angle X-ray scattering (SWAXS) indicate that removing the Tz unit in the C-shaped skeleton could reduce the self-packing of CB16, thereby enhancing the complexing and networking with PM6 in the spin-coating solution and the subsequent device film. Elucidating the structure-property-performance relationships of A-DA'D-A-type NFAs in this work paves the way for the future development of structurally simplified A-D-A-type NFAs.

Morphologies of Surface Perforations and Parallel Cylinders Coexisting in Terraced Films of Block Copolymer/Homopolymer Blends with Oxygen Plasma Etching.

This study has demonstrated how oxygen plasma etching carves surface structures for thin films of polystyrene-block-poly(methyl methacrylate)/homopolystyrene blends. By tuning the weight-fraction ratio, blend films form perforations and cylinders on the SiOx/Si substrate. Since perforations exist only on the free surface and substrate interface, short exposure to oxygen plasma to quickly etch the PMMA component produces distorted hexagonal arrays of nanodots on the free surface. The interior of the blend films forms polygrain micro-structures composed of parallel cylinders with an in-plane random orientation. Oxygen plasma etching imposed on the fractured surfaces results in five morphologies: (i) distorted hexagonal arrays of nanoholes, (ii) layer-by-layer stacks, (iii) zigzag-like arrays, (iv) intertwined rectangular arrays of nanodots and nanoholes, and (v) intertwined parallelogram arrays of nanodots and nanoholes. The morphologies suggest synergic effects of grain orientations, stresses, spatial confinement, local segregation of chains, and etching kinetics on the terraced films with oxygen plasma etching.

Gelation and the Self-Healing Behavior of the Chitosan-Catechol Hydrogel.

Mussel-inspired adhesive hydrogels have been developed in biomedical fields due to their strong adhesive property, cohesive capability, biocompatibility, and hemostatic ability. Catechol-functionalized chitosan is a potential polymer used to prepare adhesive hydrogels. However, the unique gelation mechanism and self-healing properties of catechol-grafted chitosan alone have not yet been explored. Herein, catechol-grafted chitosan (CC) was synthesized and further concentrated to obtain the self-healing CC hydrogels. The gelation mechanism of CC hydrogels may be attributed to the formation of hydrogen bonding, cation-π interactions, Michael addition, or Schiff base reactions during concentration phases. Rheological studies showed that the CC hydrogel owned self-healing properties in repeated damage-healing cycles. Coherent small-angle X-ray scattering (SAXS) analyses revealed the formation of a mesoscale structure (~9 nm) as the solid content of the hydrogel increased. In situ SAXS combined with rheometry verified the strain-dependent behavior of the CC hydrogel. The CC hydrogel displayed the osmotic-responsive behavior and enhanced adhesive strength (0.38 N/cm2) after immersion in the physiological saline. The CC scaffold prepared by lyophilizing the CC hydrogel revealed a macroporous structure (~200 µm), a high swelling ratio (9656%), good compressibility, and durability. This work provides an insight into the design of using chitosan-catechol alone to produce hydrogels or scaffolds with tunable mechanical properties for further applications in biomedical fields.

Hard X-ray ptychography at Taiwan Photon Source at 11-20†nm spatial resolution.

X-ray ptychography, a technique based on scanning and processing of coherent diffraction patterns, is a non-destructive imaging technique with a high spatial resolution far beyond the focused beam size. Earlier demonstrations of hard X-ray ptychography at Taiwan Photon Source (TPS) using an in-house program successfully recorded the ptychographic diffraction patterns from a gold-made Siemens star as a test sample and retrieved the finest inner features of 25 nm. Ptychography was performed at two beamlines with different focusing optics: a pair of Kirkpatrick-Baez mirrors and a pair of nested Montel mirrors, for which the beam sizes on the focal planes were 3 µm and 200 nm and the photon energies were from 5.1 keV to 9 keV. The retrieved spatial resolutions are 20 nm to 11 nm determined by the 10-90% line-cut method and half-bit threshold of Fourier shell correlation. This article describes the experimental conditions and compensation methods, including position correction, mixture state-of-probe, and probe extension methods, of the aforementioned experiments. The discussions will highlight the criteria of ptychographic experiments at TPS as well as the opportunity to characterize beamlines by measuring factors such as the drift or instability of beams or stages and the coherence of beams. Besides, probe functions, the full complex fields illuminated on samples, can be recovered simultaneously using ptychography. Theoretically, the wavefield at any arbitrary position can be estimated from one recovered probe function undergoing wave-propagating. The verification of probe-propagating has been carried out by comparing the probe functions obtained by ptychography and undergoing wave-propagating located at 0, 500 and 1000 µm relative to the focal plane.

Construction of Pentacyclic Lamellarin Skeleton via Grob Reaction: Application to Total Synthesis of Lamellarins H and D.

An efficient construction of phenyl-substituted coumarin-pyrrole-isoquinoline-fused pentacycle via base-promoted Grob-type coupling of 3-nitrocoumarin and papaverine in a sealed tube is reported. This reaction is further applied to the total synthesis of lamellarin H in three linear steps and lamellarin D in eight linear steps with overall yields of 31% and 14%, respectively.

Human serum albumin binding to silica nanoparticles--effect of protein fatty acid ligand.

Neutron reflectivity shows that fatted (F-HSA) and defatted (DF-HSA) versions of human serum albumin behave differently in their interaction with silica nanoparticles premixed in buffer solutions although these proteins have close to the same surface excess when the silica is absent. In both cases a silica containing film is quickly established at the air-water interface. This film is stable for F-HSA at all relative protein-silica concentrations measured. This behaviour has been verified for two small silica nanoparticle radii (42 Å and 48 Å). Contrast variation and co-refinement have been used to find the film composition for the F-HSA-silica system. The film structure changes with protein concentration only for the DF-HSA-silica system. The different behaviour of the two proteins is interpreted as a combination of three factors: increased structural stability of F-HSA induced by the fatty acid ligand, differences in the electrostatic interactions, and the higher propensity of defatted albumin to self-aggregate. The interfacial structures of the proteins alone in buffer are also reported and discussed.

Relating the composition of Pt(x)Ru(100-x)/C nanoparticles to their structural aspects and electrocatalytic activities in the methanol oxidation reaction.

A controlled composition-based method--that is, the microwave-assisted ethylene glycol (MEG) method--was successfully developed to prepare bimetallic Pt(x)Ru(100-x)/C nanoparticles (NPs) with different alloy compositions. This study highlights the impact of the variation in alloy composition of Pt(x)Ru(100-x)/C NPs on their alloying extent (structure) and subsequently their catalytic activity towards the methanol oxidation reaction (MOR). The alloying extent of these Pt(x)Ru(100-x)/C NPs has a strong influence on their Pt d-band vacancy and Pt electroactive surface area (Pt ECSA); this relationship was systematically evaluated by using X-ray absorption (XAS), scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), density functional theory (DFT) calculations, and electrochemical analyses. The MOR activity depends on two effects that act in cooperation, namely, the number of active Pt sites and their activity. Here the number of active Pt sites is associated with the Pt ECSA value, whereas the Pt-site activity is associated with the alloying extent and Pt d-band vacancy (electronic) effects. Among the Pt(x)Ru(100-x)/C NPs with various Pt:Ru atomic ratios (x = 25, 50, and 75), the Pt(75)Ru(25)/C NPs were shown to be superior in MOR activity on account of their favorable alloying extent, Pt d-band vacancy, and Pt ECSA. This short study brings new insight into probing the synergistic effect on the surface reactivity of the Pt(x)Ru(100-x)/C NPs, and possibly other bimetallic Pt-based alloy NPs.

Anomalous structural phase transition properties in ReSe2 and Au-doped ReSe2.

The high pressure induced phase transition in rhenium diselenides (ReSe(2)) and gold-doped rhenium diselenides (Au-ReSe(2)) at ambient temperature have been investigated using angular-dispersive x-ray diffraction (ADXRD) under high pressure up to around 10.50 and 9.98 GPa, respectively. In situ ADXRD measurements found that the phase transition pressures of ReSe(2) and Au-ReSe(2) began at 9.98 and 8.52 GPa, respectively. Compressibilities analysis shows the relationship of along c-axis > along a-axis > along b-axis. The linear compressibility of the pressure dependence of α, ß, and γ of ReSe(2) shows that a phase transition can be related to a counterclockwise rotational trend of the selenium atoms around the chain of Re(4) atoms during the decrease of the c-axis distance by a combination of stresses due to the bending effect of α and stretching effect of ß. The cause of the reduction of the phase transition pressure of Au-ReSe(2) is attributed mainly to a structural distortion as evidenced by the observation of a weak clockwise rotational trend of Se atoms around the chain of Re(4) atoms in the pressure range 3.99-4.99 GPa which subsequently reversed to counterclockwise rotation under higher pressure.

Resistance of ß-casein at the air-water interface to enzymatic cleavage.

X-ray reflectivity from an air-buffer interfacial ß-casein monomolecular film placed on a solution of chymosin (renin) showed unexpectedly slow proteolytic cleavage. To understand this, the separate structures of ß-casein and chymosin, the presentation of each molecule to the other at the air/liquid interface, and that of their mixtures is reported. At the air/solution interface, the hydrophobicity of the protein molecules causes orientation and some deformation of the conformation. When ß-casein was presented to a chymosin monomolecular interfacial film, the chymosin was largely displaced from the surface, which was accounted for by the different surfactancy of the two molecules at 25 °C. There was no observable proteolysis. In the reverse experiment, a significant enzymatic degradation and the signature of hydrophobic fragments was observed but only at and above an enzyme concentration of 0.015 mg/mL in the substrate. For comparison, the air/solution interface of premixed ß-casein with chymosin in phosphate buffer showed that the film was composed of ß-casein proteolytic fragments and chymosin.

Denaturation resistance of beta-lactoglobulin in monomolecular films at the air-water interface.

Using X-ray reflectometry we report strong differences in the denaturation response of beta-lactoglobulin adsorbed as a monomolecular film at the air-water interface from that observed in mixed denaturant/beta-lactoglobulin bulk solutions. Using the "flow trough" technique an isolated monomolecular film of the protein showed little change in structure when subjected to a 4.0 M guanidinium hydrochloride substrate. Unlike the bulk solution where a new protein layer structure appears, small changes in the protein packing and the roughness of the film are the only evidence of change. These parameters have been studied as a function of denaturant concentration and film quality. The strength of the response depends on the degree of perfection of the originally formed film; quickly formed films are more easily denatured. As the response is so subtle, possible interfering effects such as denaturant release of protein adsorbed on the trough have been quantified.