RESUMO
Lithium-ion capacitors (LICs) attract enormous attention because of the urgent demands for high power and energy density devices. However, the intrinsic imbalance between anodes and cathodes with different charge-storage mechanisms blocks the further improvement in energy and power density. MXenes, novel two-dimensional materials with metallic conductivity, accordion-like structure, and regulable interlayer spacing, are widely employed in electrochemical energy storage devices. Herein, we propose a holey Ti3C2 MXene-derived composite (pTi3C2/C) with enhanced kinetics for LICs. This strategy effectively decreases the surface groups (-F and -O) and generates expanded interplanar spacing. The in-plane pores of Ti3C2Tx lead to increased active sites and accelerated lithium-ion diffusion kinetics. Benefiting from the expanded interplanar spacing and accelerated lithium-ion diffusion, the pTi3C2/C as an anode implements excellent electrochemical property (capacity retention about 80% after 2000 cycles). Furthermore, the LIC fabricated with a pTi3C2/C anode and an activated carbon cathode displays a maximum energy density of 110 Wh kg-1 and a considerable energy density of 71 Wh kg-1 at 4673 W kg-1. This work provides an effective strategy to achieve high antioxidant capability and boosted electrochemical properties, which represents a new exploration of structural design and tuneable surface chemistry for MXene in LICs.
RESUMO
Despite the fact that lithium-sulfur batteries are regarded as promising next-generation rechargeable battery systems owning to high theoretical specific capacity (1675 mA h g-1) and energy density (2600 W h kg-1), several issues such as poor electrical conductivity, sluggish redox kinetics, and severe "shuttle effect" in electrodes still hinder their practical application. MXenes, novel two-dimensional materials with high conductivity, regulable interlayer spacing, and abundant functional groups, are widely applied in energy storage and conversion fields. In this work, a Ti3C2/carbon hybrid with expanded interlayer spacing is synthesized by one-step heat treatment in molten potassium hydroxide. The subsequent experiments indicate that the as-prepared Ti3C2/carbon hybrid can effectively regulate polysulfide redox conversion and has strong chemisorption interaction to polysulfides. Consequently, the Ti3C2/carbon-based sulfur cathode boosts the performance in working lithium-sulfur batteries, in terms of an ultrahigh initial discharge capacity (1668 mA h g-1 at 0.1 C), an excellent rate performance (520 mA h g-1 at 5 C), and an outstanding capacity retention of 530 mA h g-1 after 500 cycles at 1 C with a low capacity fade rate of 0.05% per cycle and stable Coulombic efficiency (nearly 99%). The above results indicate that this composite with high catalytic activity is a potential host material for further high-performance lithium-sulfur batteries.
RESUMO
INTRODUCTION: Ephedrine is a typical compound found in lots of plant species that is used in several medicines for the treatment of asthma and bronchitis. However, excess amounts are harmful to humans, so it needs to be removed. OBJECTIVE: This study developed a multi-phase extraction (MPE) method with a molecular imprinted polymer (MIP) coated ionic liquid (IL)-based silica (SiO2 @IL@MIP) to simultaneously extract and separate ephedrine from Pinellia ternata, 10 medicines, and urine samples. METHODS: IL was immobilized on silica. Subsequently, the IL was combined with the functional monomer, followed by the addition of the crosslinker and template. The resulting sorbent was applied to the MPE, and the extraction, washing and elution solvents were evaluated. RESULTS: Fourier-transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) confirmed the synthesis of SiO2 @IL@MIP. A maximum adsorption amount of 5.76 mg/g was obtained at 30°C at a neutral pH. In MPE, 10.00 mL of methanol could extract all the ephedrine from Pinellia ternata. The interference was removed by washing with 4.00 mL of water, ethanol, and acetonitrile. Finally, 8.00 mL of methanol/acetic acid (99:1, v/v) was applied as the elution solvent. The following were extracted: 5.50 µg/g of ephedrine from Pinellia ternata, 0.00-46.50 µg/g from the 10 herbal medicines, and 68.70-102.80 µg/mL in the urine samples. CONCLUSION: The proposed method was applied successfully to the simultaneously extraction and separation of ephedrine from plants and medicines. These results are expected to provide important data for the development of new methods for the separation and purification of bioactive compounds.
