RESUMO
Laser powder bed fusion (L-PBF) has attracted great interest in recent years due to its ability to produce intricate parts beyond the capabilities of traditional manufacturing processes. L-PBF processed biomedical implants are usually made of commercial pure titanium (CP-Ti) or its alloys. However, both alloys are naturally bio-inert, and thus reduce the formation of apatite as implants are put into the human body. Accordingly, in an attempt to improve the bioactivity of the materials used for making orthopedic implants, the present study decomposed fluorapatite material (FA, (Ca10(PO4)6F2)) into the form of nano-powder and mixed this powder with CP-Ti powder in two different ratios (99%Ti + 1%FA (Ti-1%FA) and 98%Ti + 2%FA (Ti-2%FA)) to form powder material for the L-PBF process. Experimental trials were conducted to establish the optimal processing conditions (i.e., laser power, scanning speed and hatching space) of the L-PBF process for the two powder mixtures and the original CP-Ti powder with no FA addition. The optimal parameters were then used to produce tensile test specimens in order to evaluate the mechanical properties of the different samples. The hardness of the various samples was also examined by micro-Vickers hardness tests. The tensile strength of the Ti-1%FA sample (850 MPa) was found to be far higher than that of the CP-Ti sample (513 MPa). Furthermore, the yield strength of the Ti-1%FA sample (785 MPa) was also much higher than that of the CP-Ti sample (472 MPa). However, the elongation of the Ti-1%FA sample (6.27 %) was significantly lower than that of the CP-Ti sample (16.17%). Finally, the hardness values of the Ti-1%FA and Ti-2%FA samples were around 63.8% and 109.4%, respectively, higher than that of the CP-Ti sample.
RESUMO
A flexible Ti/Cr/Ti multilayer strain gauge have been successfully developed based on polyimide substrate. The pure Ti metal strain gauge have shown the hysteresis phenomenon at the relationship between resistance and strain during tensile test. The experimental results of multilayer strain gauge show that adding Cr interlayer can improve the recovery and stability of the sensing electrode. When the interlayer Cr thickness was increased from 0 to 70 nm, the resistance decreased from 27 to 8.8 kΩ. The gauge factor (GF) value also decreased from 4.24 to 2.31 with the increase in the thickness of Cr interlayer from 30 to 70 nm, and the hysteresis phenomenon disappeared gradually. The multilayer Ti/Cr/Ti film has feasible application for strain sensor.
