Understanding ADC variation by fat content effect using a dual-function MRI phantom.

BACKGROUND: A dual-function phantom designed to quantify the apparent diffusion coefficient (ADC) in different fat contents (FCs) and glass bead densities (GBDs) to simulate the human tissues has not been documented yet. We propose a dual-function phantom to quantify the FC and to measure the ADC at different FCs and different GBDs. METHODS: A fat-containing diffusion phantom comprised by 30 glass-bead-containing fat-water emulsions consisting of six different FCs (0, 10, 20, 30, 40, and 50%) multiplied by five different GBDs (0, 0.1, 0.25, 0.5, and 1.0 g/50 mL). The FC and ADC were measured by the "iterative decomposition of water and fat with echo asymmetry and least squares estimation-IQ," IDEAL-IQ, and single-shot echo-planar diffusion-weighted imaging, SS-EP-DWI, sequences, respectively. Linear regression analysis was used to evaluate the relationship among the fat fraction (FF) measured by IDEAL-IQ, GBD, and ADC. RESULTS: The ADC was significantly, negatively, and linearly associated with the FF (the linear slope ranged from -0.005 to -0.017, R2 = 0.925 to 0.986, all p < 0.001). The slope of the linear relationship between the ADC and the FF, however, varied among different GBDs (the higher the GBD, the lower the slope). ADCs among emulsions across different GBDs and FFs were overlapped. Emulsions with low GBDs plus high FFs shared a same lower ADC range with those with median or high GBDs plus median or lower FFs. CONCLUSIONS: A novel dual-function phantom simulating the human tissues allowed to quantify the influence of FC and GBD on ADC. RELEVANCE STATEMENT: The study developed an innovative dual-function MRI phantom to explore the impact of FC on ADC variation that can affect clinical results. The results revealed the superimposed effect on FF and GBD density on ADC measurements. KEY POINTS: • A dual-function phantom made of glass bead density (GBD) and fat fraction (FF) emulsion has been developed. • Apparent diffusion coefficient (ADC) values are determined by GBD and FF. • The dual-function phantom showed the mutual ADC addition between FF and GBD.

Preparation, Structural Characterization of Anti-Cancer Drugs-Mediated Self-Assembly from the Pluronic Copolymers through Synchrotron SAXS Investigation.

Chemotherapy drugs are mainly administered via intravenous injection or oral administration in a very a high dosage. If there is a targeted drug vehicle which can be deployed on the tumor, the medical treatment is specific and precise. Binary mixing of biocompatible Pluronic® F127 and Pluronic® L121 was used in this study for a drug carrier of pluronic biomedical hydrogels (PBHs). Based on the same PBH ingredients, the addition of fluorouracil (5-FU) was separated in three ways when it was incorporated with pluronics: F127-L121-(5-FU), F127-(5-FU), and L121-(5-FU). Small angle X-ray scattering experiments were performed to uncover the self-assembled structures of the PBHs. Meanwhile, the expected micelle and lamellar structural changes affected by the distribution of 5-FU were discussed with respect to the corresponding drug release monitoring. PBH-all with the mixing method of F127-L121-(5-FU) has the fastest drug release rate owing to the undulated amphiphilic boundary. In contrast, PBH-2 with the mixing method of L121-(5-FU) has a prolonged drug release rate at 67% for one month of the continuous drug release experiment because the flat lamellar amphiphilic boundary of PBH-2 drags the migration of 5-FU from the hydrophobic core. Therefore, the PBHs developed in the study possess great potential for targeted delivery and successfully served as a microenvironment model to elucidate the diffusion pathway of 5-FU.

Characteristics of Dye-Sensitized Solar Cells with TiO2 Stripes.

A TiO2 strip array with a thickness of 90 nm was fabricated by photolithography and physical vapor deposition. This work utilized the chemical and physical methods to fabricate the TiO2 strip array. A porous semiconductor layer made of TiO2 nanoparticles was coated on the TiO2 strip array. The TiO2 strip array has a one-dimensional protrusive structure. The energy conversion efficiency (4.38%) of a dye-sensitized solar cell (DSSC) with the TiO2 strip array exceeded that (3.20%) of a DSSC without a TiO2 strip array by 37%. In addition, this result was verified by the electrochemical impedance spectra of the two DSSCs. Therefore, the TiO2 strip array can be used to increase the energy conversion efficiencies of DSSCs. The large energy conversion efficiency of the DSSC with the TiO2 strip array arises from the large surface area of the one-dimensional protrusive structure and its specific electron transport paths. The DSSC with the TiO2 strip array has advantages of economical production cost, easy fabrication, and boosting energy conversion efficiency.

Thermosensitive Interfacial Migration of 5-FU in the Microenvironment of Pluronic Block Copolymers.

Chemotherapy is one of the most important ways to treat cancer. At present, chemotherapy medicines are mainly administered by intravenous injection or oral administration. However, systemic medical care requires the dosage of high concentrations of drugs to defeat the malignant tumor growth. In recent years, the use of polymer composites for local and sustained drug release has become an important field of research to minimize side effects due to high-concentration chemotherapy drugs. Here, 19F-{1H} heteronuclear Overhauser enhancement spectroscopy (HOESY) was used to study the micellular environment of the F-containing chemotherapeutic drug 5-FU in Pluronic F127, Pluronic L121, and F127/L121 binary blending composites. The distribution of 5-FU in micelles is related to the PEO and PPO segment length of Pluronic polymers and the environmental temperature. The drug release tests further confirm that if 5-FU medicines were loaded in the PPO segment inside the micelles, the purpose of the prolonged drug release carrier is achieved.

Highly-Sensitive Detection of Volatile Organic Compound Vapors by Electrospun PANI/P3TI/PMMA Fibers.

Detection of volatile organic compounds (VOCs) is one of the essential concerns for human health protection and environmental monitoring. In this study, the blending fibers using a donor-acceptor copolymer were fabricated by electrospinning technique and subsequent UV/ozone treatment. The donor-acceptor polymers were polyaniline, P3TI, and poly(methyl methacrylate) (PANI/P3TI/PMMA) fibers with a cylindrical structure and uniform morphology. VOCs were directly adsorbed by the copolymer materials assembled onto a glass surface or metal framework scaffold. Under optimal conditions, the PANI/P3TI/PMMA fibers exhibit rapid response and high selectivity to VOC vapors within 30 min of UV/ozone treatment. Additionally, the optical transmittance changes of the freestanding fibers show significant improvement of more than 10 times to those fibers on glass substrates. It is speculated that the presence of P3TI leads to the formation of a heterojunction and increases the electron reception behavior. The modification of the electronic structure as exposed to VOC vapors tend to significantly alter the optical absorbance of the fibers, leading to the excellent sensing at low VOC concentration.

Ultrasensitive Detection of Volatile Organic Compounds by a Freestanding Aligned Ag/CdSe-CdS/PMMA Texture with Double-Side UV-Ozone Treatment.

Volatile organic compounds (VOCs) are organic chemicals having a high vapor pressure at room temperature. Chronic exposure to VOC vapor can be potentially dangerous to human health. In this study, we build a high-performance freestanding aligned Ag/CdSe-CdS/poly(methyl methacrylate) (PMMA) texture to detect VOC vapors. The insight of this new VOC-sensing material is based on electrospinning techniques, ultraviolet (UV)/ozone treatments, and nano-optics. The incorporation of CdSe-CdS core-shell quantum rods (QR) and silver nanocrystals in the PMMA nanofibers amplifies the polarization response of long rods in VOC detection, thus increasing the sensitivity of VOC-sensing materials. Further, the uniaxial aligned Ag/QR/PMMA sensing material was treated by UV-ozone etching to increase surface absorption. The advanced double-sided UV-ozone etching on the uniaxial aligned Ag/QR/PMMA efficiently enhanced the extinction changes of VOCs. Two categories of solvents, typical VOCs and alcoholic VOCs, were put into practical tests for the Ag/QR/PMMA VOC-sensing materials. The Ag/QR/PMMA reached the detection limit for 100 ppm butanol within 1 min. The freestanding aligned Ag/CdSe-CdS/PMMA texture is a newly designed nanocomposite device for environmental risk monitoring. It can be accepted by the market compared to the other highly sensitive commercial VOC-sensing materials.

Surface Modification of Calcium Silicate via Mussel-Inspired Polydopamine and Effective Adsorption of Extracellular Matrix to Promote Osteogenesis Differentiation for Bone Tissue Engineering.

Calcium silicate-based cement has garnered huge interest in recent years, due to its versatility and potential in mass fabrication of a variety of bioceramics. For this study, the main objective was to fabricate functionalized calcium silicate (CS) powder integrated with a simple bio-inspired surface modification using polydopamine (PDA), to regulate cellular behaviors such as cellular adhesion, and subsequently cell differentiation and proliferation. For this study, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) techniques were used to analyze the chemical compositions and observe the surface characteristics of our PDA coated CS cements. Such modifications were found to enhance Wharton Jelly's mesenchymal stem cells (WJMSC) in various ways. Firstly, PDA-coated CS cements were found to significantly enhance cell adhesion with higher expressions of cell adhesion markers, such as focal adhesion kinase and integrins. This was further supported by morphology analysis of the cells. This enhanced cell adhesion, in turn, led to significantly higher secretion of extracellular matrix (ECM) proteins, such as collagen I and fibronectin, which directly promoted cell attachments and proliferation. In our osteogenesis assays, it was found that secretion and expression of osteogenesis related genes and proteins were significantly higher and were dependent on the PDA content. Therefore, these results demonstrated that such simple bio-inspired modification techniques of synthetic degradable CS cements can be applied as a future modification, to modify and convert inert surfaces of synthetic bone grafts to enhance and modulate the cell behaviors of WJMSCs. This in turn can be used as a potential alternative for further bioengineering research.

Improved Solar-Driven Photocatalytic Performance of Highly Crystalline Hydrogenated TiO2 Nanofibers with Core-Shell Structure.

Hydrogenated titanium dioxide has attracted intensive research interests in pollutant removal applications due to its high photocatalytic activity. Herein, we demonstrate hydrogenated TiO2 nanofibers (H:TiO2 NFs) with a core-shell structure prepared by the hydrothermal synthesis and subsequent heat treatment in hydrogen flow. H:TiO2 NFs has excellent solar light absorption and photogenerated charge formation behavior as confirmed by optical absorbance, photo-Kelvin force probe microscopy and photoinduced charge carrier dynamics analyses. Photodegradation of various organic dyes such as methyl orange, rhodamine 6G and brilliant green is shown to take place with significantly higher rates on our novel catalyst than on pristine TiO2 nanofibers and commercial nanoparticle based photocatalytic materials, which is attributed to surface defects (oxygen vacancy and Ti3+ interstitial defect) on the hydrogen treated surface. We propose three properties/mechanisms responsible for the enhanced photocatalytic activity, which are: (1) improved absorbance allowing for increased exciton generation, (2) highly crystalline anatase TiO2 that promotes fast charge transport rate, and (3) decreased charge recombination caused by the nanoscopic Schottky junctions at the interface of pristine core and hydrogenated shell thus promoting long-life surface charges. The developed H:TiO2 NFs can be helpful for future high performance photocatalysts in environmental applications.