Ultrathin Ni-Fe MOF Nanosheets: Efficient and Durable Water Oxidation at High Current Densities.

Efficient, durable, and economical electrocatalysts are crucial for advancing energy technology by facilitating the oxygen evolution reaction (OER). Here, ultrathin Ni-Fe metal-organic skeleton (MOF) nanosheets were created in situ on nickel foam (NiFe-UMNs/NF). The catalyst exhibited excellent OER catalytical abilities, with only 269 mV overpotentials at 250 mA cm-2. Besides, when integrated with Pt/C/NF, NiFe-UMNs/NF held the potential for application in industrial alkaline water electrolysis with an initial voltage retention of approximately 86% following a continuous operation of 100 h at a current density of 250 mA cm-2. The super performance of the NiFe-UMNs/NF catalyst was attributed to ultrathin morphology, super hydrophilicity, and synergistic effects between Ni and Fe within the MOF. In situ Raman showed that NiFe-UMNs were converted to NiFeOOH as the active species in the OER process. Density functional theory revealed that iron doping accelerated the rate-determining step and reduced the OER reaction energy barrier. This work elucidated a promising electrocatalyst for OER and enriched the practical implementation of MOF materials.

Constructing Robust 3D Ionomer Networks in the Catalyst Layer to Achieve Stable Water Electrolysis for Green Hydrogen Production.

The widespread application of proton exchange membrane water electrolyzers (PEMWEs) is hampered by insufficient lifetime caused by degradation of the anode catalyst layer (ACL). Here, an important degradation mechanism has been identified, attributed to poor mechanical stability causing the mass transfer channels to be blocked by ionomers under operating conditions. By using liquid-phase atomic force microscopy, we directly observed that the ionomers were randomly distributed (RD) in the ACL, which occupied the mass transfer channels due to swelling, creeping, and migration properties. Interestingly, we found that alternating treatments of the ACL in different water/temperature environments resulted in forming three-dimensional ionomer networks (3D INs) in the ACL, which increased the mechanical strength of microstructures by 3 times. Benefitting from the efficient and stable mass transfer channels, the lifetime was improved by 19 times. A low degradation rate of approximately 3.0 µV/h at 80 °C and a high current density of 2.0 A/cm2 was achieved on a 50 cm2 electrolyzer. These data demonstrated a forecasted lifetime of 80 000 h, approaching the 2026 DOE lifetime target. This work emphasizes the importance of the mechanical stability of the ACL and offers a general strategy for designing and developing a durable PEMWE.

Novel Perovskite Structured Nd0.5Ba0.5Co1/3Ni1/3Mn1/3O3-δ as Highly Efficient Catalyst for Oxygen Electrode in Solid Oxide Electrochemical Cells.

Developing catalytic materials with highly efficient oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is essential for lower-temperature solid oxide fuel cell (SOFC) and electrolysis cell (SOEC) technologies. In this work, a novel triple perovskite material, Nd0.5Ba0.5Co1/3Ni1/3Mn1/3O3-δ, has been developed and employed as a catalyst for both ORR and OER in SOFC and SOEC operations at relatively lower temperatures, showing a low polarization resistance of 0.327 Ω cm2, high-power output of SOFC up to 773 mW cm-2 at 650 °C, and a high current density of 1.57 A cm-2 from SOEC operation at 1.5 V at 600 °C. The relaxation time distribution reveals that Nd0.5Ba0.5Co1/3Ni1/3Mn1/3O3-δ could maintain a slow polarization process at the relatively low operating temperature, offering a significant antipolarization advantage over other perovskite electrode materials. The Nd0.5Ba0.5Co1/3Ni1/3Mn1/3O3-δ electrode provides a low energy barrier of about 0.36 eV in oxygen ion mobility, which is beneficent for oxygen reduction/evolution reaction processes.

Enhanced Proton Transport of ß″-Al2O3 Modified by LiAlO2 as a High-Performance Electrolyte for a Low-Temperature Solid Oxide Fuel Cell and an Electrolyzer.

ß″-Al2O3 has been proven as a fast ionic conductor in solid batteries due to its unique structure. In this work, ß″-Al2O3 was further modified by LiAlO2 and employed as the electrolyte material for low-temperature solid oxide fuel cells and electrolyzers, i.e., proton-conducting ceramic fuel cells and electrolysis cells, named as PCFC and PCEC, respectively. At 550 °C, thanks to this superior electrolyte with a remarkable conductivity of 0.161 S·cm-1, the PCFC reached a high power density up to 1029 mW·cm-2, and the PCEC demonstrated a significant current density of 1.49 A·cm-2 at a low operation voltage of 2.0 V. It has been found that the introduction of the LiAlO2 phase into ß″-Al2O3 reduces the total impedance, while it increases the oxygen vacancy concentration and thus promotes the proton transport process with the reduced activation energy. This work provides a new approach for exploring two-dimensional materials with high-ionic conductivity that can be applied for solid oxide fuel cells and water electrolyzers and more wider power-to-X devices such as electrosynthesis for green ammonia production.

Cross-linked solid-liquid interfaces enable a fast proton transport in the aluminate heterostructure electrolyte.

Having a highly-conductive protonic electrolyte is an essential requirement of developing solid ceramic fuel cell (SCFC) operated below 600 °C. Proton transport in solid electrolyte structure occurs via a bulk conduction mechanism in conventional SCFC, which may not be so efficient; therefore we have developed a fast proton conducting NaAlO2/LiAlO2 (NAO-LAO) heterostructure electrolyte, achieving the ionic conductivity of 0.23 S cm-1 thanks to its rich cross-linked solid-liquid interfaces; the SCFC employing this new developed electrolyte showed a maximum power density of 844 mW cm-2 at 550 °C, and the fuel cell could still operate at even lower temperatures down to 370 °C, although the output reduced to 90 mW cm-2. The proton-hydration liquid layer promoted the formation of cross-linked solid-liquid interfaces in the NAO-LAO electrolyte, which promoted the construction of solid-liquid hybrid proton transportation channels and effectively reduced polarization loss, leading to high proton conduction at even lower temperatures. This work provides an efficient design approach for developing enabling electrolytes with high proton conductivity for SCFCs to be operated at relatively lower temperatures (300-600 °C) than traditional solid oxide fuel cells which operate above 750 °C.

Insights into the Origin of High Activity of Ni5P4(0001) for Hydrogen Evolution Reaction.

Hydrogen evolution reaction (HER) is directly relevant to green hydrogen production from water splitting. Recently, a low-cost Ni5P4 material has been demonstrated experimentally and theoretically to exhibit excellent electrocatalytic activity toward HER. However, a fundamental understanding of the origin of Ni5P4(0001) activity is still lacking. In this work, density functional theory (DFT) calculations were employed for a comprehensive investigation. The calculation results indicate that the Ni5P4(0001) surface exposing Ni3P4 termination gains the highest stability, on which a nearly thermoneutral hydrogen adsorption was found at the P3-hollow sites, providing a high activity for HER. The activity was also observed to be maintained over a wide H-coverage. HER occurs via the Volmer-Heyrovsky mechanism as evidenced from the optimal hydrogen adsorption free energy, but unlikely through the Tafel reaction due to its large energy barrier. Furthermore, the P3-hollow sites also exhibit a low kinetic barrier for water dissociation, promoting HER in alkaline media. A series of electronic structure analyses were performed in gaining insights into the origin of the HER activity. First, the density of states (DOS) and crystal orbital Hamilton population (COHP) analyses revealed a favorable interaction of electronic states between P and H atoms, leading to stable H adsorption at P3-hollow sites. In addition, the Bader charge analysis demonstrates that the strength of H adsorption at P3-hollow sites linearly increases with the electrons carried by the latter. The optimal net charge on the P3-hollow sites leads to a desired ΔG H that is close-to-zero. Finally, a highly efficient electron transfer was observed between the P3-hollow sites and their neighboring atoms, facilitating the HER.

Synthesis and characterization of Craig-type antiaromatic species with [4n + 2] π electrons.

Antiaromaticity is extended from aromaticity as a complement to describe the unsaturated cyclic molecules with antiaromatic destabilization. To prepare antiaromatic species is a particularly challenging goal in synthetic chemistry because of the thermodynamic instability of such molecules. Among that, both Hückel and Möbius antiaromatic species have been reported, whereas the Craig one has not been realized to date. Here, we report the first example of planar Craig antiaromatic species. Eight Craig antiaromatic compounds were synthesized by deprotonation-induced reduction process and were fully characterized as follows. Single-crystal X-ray crystallography showed that these complexes have planar structures composed of fused five-membered rings with clearly alternating carbon-carbon bond lengths. In addition, proton NMR (1H NMR) spectroscopy in these structures showed distinctive upfield shifts of the proton peaks to the range of antiaromatic peripheral hydrogens. Experimental spectroscopy observations, along with density-functional theory (DFT) calculations, provided evidence for the Craig antiaromaticity of these complexes. Further study experimentally and theoretically revealed that the strong exothermicity of the acid-base neutralization process was the driving force for this challenging transformation forming Craig antiaromatic species. Our findings complete a full cycle of aromatic chemistry, opening an avenue for the development of new class of antiaromatic systems.

Insights into reaction mechanisms of ethanol electrooxidation at the Pt/Au(111) interfaces using density functional theory.

Understanding ethanol electrooxidation reaction kinetics is fundamental to the development of direct ethanol fuel cells. The utilization of binary PtAu catalysts has been reported recently as an effective strategy to enhance ethanol electrocatalytic oxidation; however, the catalytic reaction mechanisms are still unclear. In this work, we systematically studied the ethanol electrooxidation reaction mechanisms on Pt/Au(111) model surfaces at an atomic level through high level density functional theory (DFT) calculations; particularly the flat (111) terrace and the stepped (111) × (110) and (111) × (100) interfaces with diverse surface atomic arrangements were considered, respectively. It was found that for ethanol dissociation, the flat (111) terrace is more active than the stepped (111) × (110) and (111) × (100) interfaces. The stepped interfaces, however, could activate water from the aqueous electrolyte solution to form adsorbed OH* at the electrode potential below 0.53 V vs. SHE (standard hydrogen electrode), which is of great importance in coupling with the CH3CO* intermediate formed from ethanol dissociation to produce acetic acid as the final product of the ethanol electrooxidation reaction without releasing CO2. The C-C bond splitting process for ethanol oxidation to form C1 products was very limited. The terrace sites can facilitate both ethanol decomposition and acetic acid formation at the electrode potential above 0.53 V vs. SHE. Our results clearly identify the fact that for ethanol electrooxidation reactions, with an increase in electrode potential, the active sites on Pt/Au(111) surfaces change from those at the stepped interfaces to the flat terrace sites.

High CO-Tolerant Ru-Based Catalysts by Constructing an Oxide Blocking Layer.

CO poisoning of Pt-group metal catalysts is a long-standing problem, particularly for hydrogen oxidation reaction in proton exchange membrane fuel cells. Here, we report a catalyst of Ru oxide-coated Ru supported on TiO2 (Ru@RuO2/TiO2), which can tolerate 1-3% CO, enhanced by about 2 orders of magnitude over the classic PtRu/C catalyst, for hydrogen electrooxidation in a rotating disk electrode test. This catalyst can work stably in 1% CO/H2 for 50 h. About 20% of active sites can survive even in a pure CO environment. The high CO tolerance is not via a traditional bifunctional mechanism, i.e., oxide promoting CO oxidation, but rather via hydrous metal oxide shell blocking CO adsorption. An ab initio molecular dynamics (AIMD) simulation indicates that water confined in grain boundaries of the Ru oxide layer and Ru surface can suppress the diffusion and adsorption of CO. This oxide blocking layer approach opens a promising avenue for the design of high CO-tolerant electrocatalysts for fuel cells.

Designing High Interfacial Conduction beyond Bulk via Engineering the Semiconductor-Ionic Heterostructure CeO2-δ/BaZr0.8Y0.2O3 for Superior Proton Conductive Fuel Cell and Water Electrolysis Applications.

Proton ceramic fuel cells (PCFCs) are an emerging clean energy technology; however, a key challenge persists in improving the electrolyte proton conductivity, e.g., around 10-3-10-2 S cm-1 at 600 °C for the well-known BaZr0.8Y0.2O3 (BZY), that is far below the required 0.1 S cm-1. Herein, we report an approach for tuning BZY from low bulk to high interfacial conduction by introducing a semiconductor CeO2-δ forming a semiconductor-ionic heterostructure CeO2-δ/BZY. The interfacial conduction was identified by a significantly higher conductivity obtained from the BZY grain boundary than that of the bulk and a further improvement from the CeO2-δ/BZY which achieved a remarkably high proton conductivity of 0.23 S cm-1. This enabled a high peak power of 845 mW cm-2 at 520 °C from a PCFC using the CeO2-δ/BZY as the electrolyte, in strong contrast to the BZY bulk conduction electrolyte with only 229 mW cm-2. Furthermore, the CeO2-δ/BZY fuel cell was operated under water electrolysis mode, exhibiting a very high current density output of 3.2 A cm-2 corresponding to a high H2 production rate, under 2.0 V at 520 °C. The band structure and a built-in-field-assisted proton transport mechanism have been proposed and explained. This work demonstrates an efficient way of tuning the electrolyte from low bulk to high interfacial proton conduction to attain sufficient conductivity required for PCFCs, electrolyzers, and other advanced electrochemical energy technologies.

Supercooled melt structure and dynamics of single-chain nanoparticles: A computer simulation study.

By using coarse-grained molecular dynamics simulations, we have investigated the structure and dynamics of supercooled single-chain cross-linked nanoparticle (SCNP) melts having a range of cross-linking degrees ϕ. We find a nearly linear increase in glass-transition temperature (Tg) with increasing ϕ. Correspondingly, we have also experimentally synthesized a series of polystyrene-based SCNPs and have found that the measured Tg estimated from differential scanning calorimetry is qualitatively consistent with the trend predicted by our simulation estimates. Experimentally, an increase in Tg as large as ΔTg = 61 K for ϕ = 0.36 is found compared with their linear chain counterparts, indicating that the changes in dynamics with cross-links are quite appreciable. We attribute the increase in Tg to the enlarged effective hard-core volume and the corresponding reduction in the free volume of the polymer segments. Topological constraints evidently frustrate the local packing. In addition, the introduction of intra-molecular cross-linking bonds slows down the structural relaxation and simultaneously enhances the local coupling motion on the length scales within SCNPs. Consequently, a more pronounced dynamical heterogeneity (DH) is observed for larger ϕ, as quantified by measuring the dynamical correlation length through the four-point susceptibility parameter, χ4. The increase in DH is directly related to the enhanced local cooperative motion derived from intra-molecular cross-linking bonds and structural heterogeneity derived from the cross-linking process. These results shed new light on the influence of intra-molecular topological constraints on the segmental dynamics of polymer melts.

Layered double hydroxide-based electrocatalysts for the oxygen evolution reaction: identification and tailoring of active sites, and superaerophobic nanoarray electrode assembly.

The electrocatalytic oxygen evolution reaction (OER) is a critical half-cell reaction for hydrogen production via water electrolysis. However, the practical OER suffers from sluggish kinetics and thus requires efficient electrocatalysts. Transition metal-based layered double hydroxides (LDHs) represent one of the most active classes of OER catalysts. An in-depth understanding of the activity of LDH based electrocatalysts can promote further rational design and active site regulation of high-performance electrocatalysts. In this review, the fundamental understanding of the structural characteristics of LDHs is demonstrated first, then comparisons and in-depth discussions of recent advances in LDHs as highly active OER catalysts in alkaline media are offered, which include both experimental and computational methods. On top of the active site identification and structural characterization of LDHs on an atomic scale, strategies to promote the OER activity are summarised, including doping, intercalation and defect-making. Furthermore, the concept of superaerophobicity, which has a profound impact on the performance of gas evolution electrodes, is explored to enhance LDHs and their derivatives for a large scale OER. In addition, certain operating standards for OER measurements are proposed to avoid inconsistency in evaluating the OER activity of LDHs. Finally, several key challenges in using LDHs as anode materials for large scale water splitting, such as the issue of stability and the adoption of membrane-electrode-assembly based electrolysers, are emphasized to shed light on future research directions.

Understanding of Dynamic Contacting Behaviors of Underwater Gas Bubbles on Solid Surfaces.

Understanding of dynamic behaviors of gas bubbles on solid surfaces has significant impacts on gas-involving electrochemical reactions, mineral flotation, and so on in industry. Contact angle (θ) is widely employed to characterize the wetting behaviors of bubbles on solid surfaces; however, it usually fluctuates within the bubble's advancing (θa) and receding (θr) range. Although the term of most-stable contact angle (θms) was defined previously as the closest valuable approximation for thermodynamically meaningful contact angle for a droplet on a solid surface, it has not been widely studied; and the precise θms measurement methods are inadequate to describe bubbles' wetting behaviors on solid surfaces. Herein, we proposed to take θms as the mean value of θa and θr, as a more accurate descriptor of gas bubbles' dynamic behaviors on nonideal solid surfaces, similar to the definition of droplets' θms on solid surfaces. The feasibility and accuracy of the proposed θms have been evidenced by recording the bubbles' contacting behaviors on solid surfaces with varied wettabilities. In addition, it was found that the contact angle hysteresis (δ), as the difference between θa and θr, reached its maximum value when θms approached 90°, regardless of the roughness (r) of the substrates. Finally, built on the above concept, the lateral adhesion force (f) of the gas bubble on the solid interface, which worked on the three-phase contact line (TPCL) of an individual bubble on a solid surface against its lateral motion during the bubble advancing or receding process, was described quantitatively by combining θa, θr, and the liquid-gas interfacial tension (γlg). Experimental and theoretical data jointly confirmed that f reached its maximum value at θms ∼ 90°, namely, a "super-sticky" state, which described the dynamically most sluggish movement of the bubble along the solid surface.

Antibuoyancy and Unidirectional Gas Evolution by Janus Electrodes with Asymmetric Wettability.

The bubbles electrochemically generated by gas evolution reactions are commonly driven off the electrode by buoyancy, a weak force used to overcome bubble adhesion barriers, leading to low gas-transporting efficiency. Herein, a Janus electrode with asymmetric wettability has been prepared by modifying two sides of a porous stainless-steel mesh electrode, with superhydrophobic polytetrafluoroethylene (PTFE) and Pt/C (or Ir/C) catalyst with well-balanced hydrophobicity, respectively, affording unidirectional transportation of as-formed gaseous hydrogen and oxygen from the catalyst side to the gas-collecting side during water splitting. "Bubble-free" electrolysis was realized while "floating" the Janus electrode on the electrolyte. Antibuoyancy through-mesh bubble transportation was observed while immersing the electrode with the PTFE side downward. The wettability gradient within the electrode endowed sticky states of bubbles on the catalyst side, resulting in efficient bubble-free gas transportation with 15-fold higher current density than submerged states.

An unexpected N-dependence in the viscosity reduction in all-polymer nanocomposite.

Adding small nanoparticles (NPs) into polymer melt can lead to a non-Einstein-like decrease in viscosity. However, the underlying mechanism remains a long-standing unsolved puzzle. Here, for an all-polymer nanocomposite formed by linear polystyrene (PS) chains and PS single-chain nanoparticles (SCNPs), we perform large-scale molecular dynamics simulations and experimental rheology measurements. We show that with a fixed (small) loading of the SCNP, viscosity reduction (VR) effect can be largely amplified with an increase in matrix chain length [Formula: see text], and that the system with longer polymer chains will have a larger VR. We demonstrate that such [Formula: see text]-dependent VR can be attributed to the friction reduction experienced by polymer segment blobs which have similar size and interact directly with these SCNPs. A theoretical model is proposed based on the tube model. We demonstrate that it can well describe the friction reduction experienced by melt polymers and the VR effect in these composite systems.

Pseudopod-associated protein KIF20B promotes Gli1-induced epithelial-mesenchymal transition modulated by pseudopodial actin dynamic in human colorectal cancer.

Kinesin family member 20B (KIF20B) has been reported to have an oncogenic role in bladder and hepatocellular cancer cells, but its role in colorectal cancer (CRC) progression remains unclear. In this study, we assessed the mRNA and protein levels of KIF20B in CRC tissues using qRT-PCR and immunohistochemistry, respectively. KIF20B was overexpressed in CRC tissues and was associated with cancer invasion and metastasis. Mechanistically, KIF20B overexpression promoted the epithelial-mesenchymal transition (EMT) process mediated by glioma-associated oncogene 1 (Gli1) as well as CRC cell migration and invasion. Interestingly, KIF20B was localized in pseudopod protrusions of CRC cells and influenced the formation of cell protrusions, especially the EMT-related invadopodia. Moreover, intracellular actin dynamic participated in the modulation of the Gli1-mediated EMT and EMT-related cell pseudopod protrusion formation induced by KIF20B. We identified a role for KIF20B in CRC progression and revealed a correlation between KIF20B expression in CRC tissues and patient prognosis. The underlying mechanism was associated with the Gli1-mediated EMT and EMT-related cell protrusion formation modulated by intracellular actin dynamic. Thus, KIF20B may be a potential biomarker and promising treatment target for CRC.

Electrocatalytic oxidation of ethanol and ethylene glycol on cubic, octahedral and rhombic dodecahedral palladium nanocrystals.

Cubic, octahedral and rhombic dodecahedral Pd nanocrystals were synthesized and examined as nanocatalysts for electro-oxidation of ethanol and ethylene glycol. Combined electrochemical measurements and density functional theory calculations reveal that nanofacet-dependent affinity and reactivity of OHads and COads are closely linked to the C2 alcohol oxidation activities, with the highest reactivity found on the Pd nanocubes bounded by {100} facets.

Effect of Mass Transport on the Electrochemical Oxidation of Alcohols Over Electrodeposited Film and Carbon-Supported Pt Electrodes.

Electrochemical oxidation of four different alcohol molecules (methanol, ethanol, n-butanol and 2-butanol) at electrodeposited Pt film and carbon-supported Pt catalyst film electrodes, as well as the effect of mass transport on the oxidation reaction, has been studied systematically using the rotating disk electrode (RDE) technique. It was shown that oxidation current decreased with an increase in the rotation rate (ω) for all alcohols studied over electrodeposited Pt film electrodes. In contrast, the oxidation current was found to increase with an increase in the ω for Pt/C in ethanol and n-butanol-containing solutions. The decrease was found to be nearly reversible for ethanol and n-butanol at the electrodeposited Pt film electrode ruling out the possibility of intermediate COads poisoning being the sole cause of the decrease and was attributed to the formation of soluble intermediate species which diffuse away from the electrode at higher ω. In contrast, an increase in the current with an increase in ω for the carbon supported catalyst may suggest that the increase in residence time of the soluble species within the catalyst layer, results in further oxidation of these species. Furthermore, the reversibility of the peak current on decreasing the ω could indicate that the surface state has not significantly changed due to the sluggish reaction kinetics of ethanol and n-butanol.

High expression of GPR116 indicates poor survival outcome and promotes tumor progression in colorectal carcinoma.

Previous studies have found that G-protein-coupled receptor 116 (GPR116) is a regulator of breast cancer metastasis. However, the role of GPR116 in colorectal carcinoma (CRC) carcinogenesis and progression is unknown. In this study, We found GPR116 expression was significantly up-regulated in CRC specimens compared with corresponding non-cancerous tissues. Increased GPR116 expression in CRC was correlated with histological differentiation and distant metastasis. In addition, high expression of GPR116 was significantly associated with poor overall survival of CRC patients, which was also confirmed by GSE14333, GSE17536 and GSE33113 datasets from the Gene Expression Omnibus (GEO). Furthermore, we demonstrated that the ability of proliferation and invasion of CRC cell lines HCT116 and LOVO was markedly reduced after transfected with siRNA-GPR116. Meanwhile, GPR116 may drive EMT in CRC cells through AKT/EKR signaling pathway, resulting in metastasis. Thus, GPR116 may be a novel reliable prognostic indicator and a risk factor in CRC progression.

Dodecahedral W@WC Composite as Efficient Catalyst for Hydrogen Evolution and Nitrobenzene Reduction Reactions.

Core-shell composites with strong phase-phase contact could provide an incentive for catalytic activity. A simple, yet efficient, H2O-mediated method has been developed to synthesize a mesoscopic core-shell W@WC architecture with a dodecahedral microstructure, via a one-pot reaction. The H2O plays an important role in the resistance of carbon diffusion, resulting in the formation of the W core and W-terminated WC shell. Density functional theory (DFT) calculations reveal that adding W as core reduced the oxygen adsorption energy and provided the W-terminated WC surface. The W@WC exhibits significant electrocatalytic activities toward hydrogen evolution and nitrobenzene electroreduction reactions, which are comparable to those found for commercial Pt/C, and substantially higher than those found for meso- and nano-WC materials. The experimental results were explained by DFT calculations based on the energy profiles in the hydrogen evolution reactions over WC, W@WC, and Pt model surfaces. The W@WC also shows a high thermal stability and thus may serve as a promising more economical alternative to Pt catalysts in these important energy conversion and environmental protection applications. The current approach can also be extended or adapted to various metals and carbides, allowing for the design and fabrication of a wide range of catalytic and other multifunctional composites.