A single-building damage detection model based on multi-feature fusion: A case study in Yangbi.

Accurate and effective identification, determination of the location, and classification of damaged buildings are essential after destructive earthquakes. However, the accuracy of image change detection is limited because of the many texture features and changes in non-building information. In this context, a model for single-building damage detection based on multi-feature fusion is proposed. First, the normalized Digital Surface Model (nDSM) was extracted from the DSM through iterative filtering and point cloud thinning, followed by the extraction of building contour information. Next, single-building images were generated from different data sources through the region of interest (ROI), and the optimal texture feature parameters were extracted for fusion. Afterward, principal-component analysis (PCA) was conducted to suppress multi-feature correlation-induced information redundancy. Finally, the damage to buildings was quantitatively evaluated, and the model was compared with 13 models. The results confirmed the practicability of the model for the Yangbi MS6.4 and Honghe MS5.0 earthquakes.

Effect of T-shape Shoulder Fillet on the Plastic Deformation Properties of SS400 and LYS160 Steel.

Shoulder fillets are widely used in the structural optimization design of metal dampers. However, the plastic deformation property of dampers affected by stress concentration, owing to different fillets, has not been explored in-depth. In this study, two typical metal damper materials with different plastic deformation, i.e., ordinary steel SS400 and low-yield-strength steel LYS160, were investigated. The strengthening effect of fillets under different loading is evaluated by comparing the mechanical properties of different fillet heights. Furthermore, the effect of the stress concentration caused by different fillet shapes, based on the failure mode of materials, is discussed. Subsequently, the fatigue degradation effect under the reciprocating shear loading is studied. Based on a series of studies on the deformation properties of fillets in different ductile materials, the basis for the structural optimization design under plastic deformation is provided.