Solid-state 360° optical beamforming for reconfigurable multicast optical wireless communications.

Optical wireless communication is an attractive technique for data center interconnects due to its low latency line-of-sight connectivity. Multicast, on the other hand, is an important data center network function that can improve traffic throughput, reduce latency, and make efficient use of network resources. To enable reconfigurable multicast in data center optical wireless networks, we propose a novel 360° optical beamforming scheme based on the principle of superposition of orbital angular momentum modes, emitting beams from the source rack pointing towards any combination of other racks so that connections are established between the source and multiple destination racks. We experimentally demonstrate the scheme using solid state devices for a scenario where racks are arranged in a hexagonal formation in which a source rack can connect with any number of adjacent racks simultaneously, with each link transmitting 70 Gb/s on-off-keying modulations at bit error rates of <10-6 at 1.5-m and 2.0-m link distances.

Compact 100GBaud driverless thin-film lithium niobate modulator on a silicon substrate.

Electro-optic (EO) modulators with a high modulation bandwidth are indispensable parts of an optical interconnect system. A key requirement for an energy-efficient EO modulator is the low drive voltage, which can be provided using a standard complementary metal oxide semiconductor circuity without an amplifying driver. Thin-film lithium niobate has emerged as a new promising platform, and shown its capable of achieving driverless and high-speed EO modulators. In this paper, we report a compact high-performance modulator based on the thin-film lithium niobate platform on a silicon substrate. The periodic capacitively loaded travelling-wave electrode is employed to achieve a large modulation bandwidth and a low drive voltage, which can support a driverless single-lane 100Gbaud operation. The folded modulation section design also helps to reduce the device length by almost two thirds. The fabricated device represents a large EO bandwidth of 45GHz with a half-wave voltage of 0.7V. The driverless transmission of a 100Gbaud 4-level pulse amplitude modulation signal is demonstrated with a power consumption of 4.49fj/bit and a bit-error rate below the KP4 forward-error correction threshold of 2.4×10-4.

1120-channel OAM-MDM-WDM transmission over a 100-km single-span ring-core fiber using low-complexity 4×4 MIMO equalization.

A successful transmission of 14 multiplexed orbital angular momentum (OAM) channels each carrying 80 wavelengths over a 100-km single-span ring-core fiber (RCF) is experimentally demonstrated. Each transmission channel is modulated by a 20-GBaud quadrature phase-shift keying (QPSK) signal, achieving a record spectral-efficiency-distance product of 1870 (bit/s/Hz)·km for the single-core RCF based mode division multiplexing (MDM) transmissions. In addition, only low-complexity 2×2 or 4×4 multiple-input multiple-output (MIMO) equalization with time-domain equalization tap number no more than 25 is required to deal with the crosstalk among the highly degenerate intra-MG modes at the receiving end of the demonstrated OAM-MDM-WDM system, showing great potential in large-capacity and relatively long-distance MDM transmission with low digital signal processing (DSP) complexity.

1-Pbps orbital angular momentum fibre-optic transmission.

Space-division multiplexing (SDM), as a main candidate for future ultra-high capacity fibre-optic communications, needs to address limitations to its scalability imposed by computation-intensive multi-input multi-output (MIMO) digital signal processing (DSP) required to eliminate the crosstalk caused by optical coupling between multiplexed spatial channels. By exploiting the unique propagation characteristics of orbital angular momentum (OAM) modes in ring core fibres (RCFs), a system that combines SDM and C + L band dense wavelength-division multiplexing (DWDM) in a 34 km 7-core RCF is demonstrated to transport a total of 24960 channels with a raw (net) capacity of 1.223 (1.02) Peta-bit s-1 (Pbps) and a spectral efficiency of 156.8 (130.7) bit s-1 Hz-1. Remarkably for such a high channel count, the system only uses fixed-size 4 × 4 MIMO DSP modules with no more than 25 time-domain taps. Such ultra-low MIMO complexity is enabled by the simultaneous weak coupling among fibre cores and amongst non-degenerate OAM mode groups within each core that have a fixed number of 4 modes. These results take the capacity of OAM-based fibre-optic communications links over the 1 Pbps milestone for the first time. They also simultaneously represent the lowest MIMO complexity and the 2nd smallest fibre cladding diameter amongst reported few-mode multicore-fibre (FM-MCF) SDM systems of >1 Pbps capacity. We believe these results represent a major step forward in SDM transmission, as they manifest the significant potentials for further up-scaling the capacity per optical fibre whilst keeping MIMO processing to an ultra-low complexity level and in a modularly expandable fashion.

Compact substrate-removed thin-film lithium niobate electro-optic modulator featuring polarization-insensitive operation.

A compact polarization-insensitive electro-optic (EO) modulator, which allows the laser and modulator to be located at different locations while using a standard single-mode fiber to interconnect them, is highly desirable for 5G or future 6G wireless networks. Herein, we propose a modulator based on substrate-removed thin-film lithium niobate. The proposed device exhibits a polarization-dependent loss of 0.35 dB and on-chip loss of approximately 2 dB. The polarization insensitivity of the proposed device was experimentally demonstrated using a four-level pulse-amplitude modulation format at 50 Gbaud (100 Gb/ s).

Low-complexity sparse absolute-term based nonlinear equalizer for C-band IM/DD systems.

A low-complexity sparse absolute-term based nonlinear equalizer (AT-NLE) is proposed to eliminate the nonlinear signal distortions for intensity modulation and direct detection (IM/DD) systems. By performing the orthogonal matching pursuit (OMP) algorithm to adaptively obtain the significant kernels of both the linear and absolute terms, the computational complexity of the proposed sparse AT-NLE is dramatically reduced and independent of the memory length. The performance of the proposed sparse AT-NLE is experimentally evaluated in a C-band 56-Gbit/s four-level pulse-amplitude modulation (PAM-4) system over a 30-km standard single-mode fiber (SSMF). Experimental results show that compared with the conventional diagonally-pruned Volterra nonlinear equalizer (DP-VNLE) or DP-AT-NLE, the proposed sparse AT-NLE saves 77.7% or 76% real-valued multiplications when their achieved bit error ratios (BERs) are similar. Meanwhile, the proposed sparse AT-NLE reduces the computational complexity by > 28% compared to the sparse DP-VNLE at a BER of 5 × 10-4. The proposed low-complexity sparse AT-NLE shows great potential for high-performance and low-cost IM/DD optical transmission systems.

Data-defined naïve Bayes (DNB) based decision scheme for the nonlinear mitigation for OAM mode division multiplexed optical fiber communication.

In this manuscript, a data-defined naïve Bayes (DNB)-based decision scheme for nonlinear mitigation is presented for an orbital angular momentum (OAM) mode-division multiplexed optical fiber communication system. Due to the inherent nonlinearity characteristic of opto-electronic devices, the strong nonlinear impairments are deemed inevitable in OAM mode-division multiplexed transmission, leading to severely nonlinear effects. A DNB algorithm based on the prior probability distribution is adopted to mitigate the strong device nonlinearity of the OAM communication system, which is hard to solve using the conventional approaches due to the complex theoretical model of opto-electronic devices. An experiment using eight-mode OAM with a 32GBaud Nyquist QPSK signal optical fiber communication system is carried out with ring core fiber (RCF) transmission over 10 km to verify the effectiveness of the proposed scheme. The experimental results demonstrate that the nonlinear effects on OAM transmission can be effectively mitigated using a DNB-based decision with a bit error rate (BER) reduction of at most 66%. Moreover, compared with other nonlinear decision algorithms based on machine learning, such as support vector machine (SVM) or k-nearest neighbors (KNN), the digital signal processing complexity of the DNB algorithm is significantly reduced.