In-situ label-free temperature-compensated DNA hybridization detection with a fiber-optic interferometer and a fiber Bragg grating for microfluidic chip.

We demonstrated a temperature-compensated optofluidic DNA biosensor available for microfluidic chip. The optofluidic sensor was composed of an interferometer and a fiber Bragg grating (FBG) by femtosecond laser direct writing micro/nano processing technology. The sensing arm of the interferometer was suspended on the inner wall of the microchannel and could directly interact with the microfluid. With the immobilization of the single stranded probe DNA (pDNA), this optofluidic biosensor could achieve specific detection of single stranded complementary DNA (scDNA). The experimental results indicated that a linear response within 50 nM and the detection limit of 1.87 nM were achieved. In addition, the optofluidic biosensor could simultaneously monitor temperature to avoid temperature fluctuations interfering with the DNA hybridization detection process. And, the optofluidic detection channel could achieve fast sample replacement within 10 s at a flow rate of 2 µL/min and sample consumption only required nanoliters. This optofluidic DNA biosensor had the advantages of label-free, good specificity, dual parameter detection, low sample consumption, fast response, and easy repeatable preparation, which was of great significance for the field of DNA hybridization research and solving the temperature sensitivity problem of biosensors and had good prospects in biological analysis.

Potential of cadmium resistant Burkholderia contaminans strain ZCC in promoting growth of soy beans in the presence of cadmium.

Bioremediation of Cd contaminated environments can be assisted by plant-growth-promoting bacteria (PGPB) enabling plant growth in these sites. Here a gram-negative Burkholderia contaminans ZCC was isolated from mining soil at a copper-gold mine. When exposed to Cd(II), ZCC displayed high Cd resistance and the minimal inhibitory concentration was 7 mM in LB medium. Complete genome analysis uncovered B. contaminans ZCC contained 3 chromosomes and 2 plasmids. One of these plasmids was shown to contain a multitude of heavy metal resistance determinants including genes encoding a putative Cd-translocating PIB-type ATPase and an RND-type related to the Czc-system. These additional heavy metal resistance determinants are likely responsible for the increased resistance to Cd(II) and other heavy metals in comparison to other strains of B. contaminans. B. contaminans ZCC also displayed PGPB traits such as 1-aminocyclopropane-1-carboxylate deaminase activity, siderophore production, organic and inorganic phosphate solubilization and indole acetic acid production. Moreover, the properties and Cd(II) binding characteristics of extracellular polymeric substances was investigated. ZCC was able to induce extracellular polymeric substances production in response to Cd and was shown to be chemically coordinated to Cd(II). It could promote the growth of soybean in the presence of elevated concentrations of Cd(II). This work will help to better understand processes important in bioremediation of Cd-contaminated environment.

Rapid purification of lung cancer cells in pleural effusion through spiral microfluidic channels for diagnosis improvement.

Lung cancer is one of the leading causes of death worldwide. Fifteen percent of lung cancer patients will present with malignant pleural effusion initially, and up to 50% will have malignant pleural effusion throughout the course of the disease. In this study, we developed a spiral microfluidic device that can rapidly isolate cancer cells and improve their purity through fluid dynamics. This label-free, high-throughput device continuously isolates cancer cells and other unrelated molecules from pleural effusion. Most of the background cells that affect interpretation are flushed to outlets 1 to 3, and cancer cells are hydrodynamically concentrated to outlet 4, with 90% of lung cancer cells flowing to this outlet. After processing, the purity of cancer cells identified in pleural effusion by CD45 and epithelial cell adhesion molecule (EpCAM) antibodies in flow cytometry will be increased by 6 to 24 times. The microfluidic device presented here has the advantages of rapid processing and low cost, which are conducive to rapid and accurate clinical diagnosis.

Fabrication and characterization of hydroxyapatite/sodium alginate/chitosan composite microspheres for drug delivery and bone tissue engineering.

Hydroxyapatite/sodium alginate/chitosan (HA/SA/CS) composite microspheres, which possess good biocompatibility for specific biomedical application, were prepared using an emulsion crosslink technique; calcium ions were used as a cross-linking agent. The effect of the concentration of sodium alginate (SA), the volume ratio of water to oil, the content of hydroxyapatite (HA) nanoparticles, as well as rotation speed, on the morphology and dispersion of composite microspheres were investigated. Also investigated were the drug loading, release behaviors, in vitro hemolysis activity, cytotoxicity, cell adhesion and proliferation capacity of the materials. The results demonstrate that the HA/SA/CS composite microspheres were successfully prepared; their drug loading and encapsulation efficiency are much higher than that of HA nanoparticles. Dox-loaded HA/SA/CS composite microspheres show good pH-sensitive drug-release capability. The hemolysis and cytotoxicity tests suggest that the microspheres have good blood and cell compatibility. Furthermore, the prepared composite microspheres display better cell adhesion and proliferation capacity than HA nanoparticles and HA/SA composite microspheres. Therefore, the HA/SA/CS composite microspheres might have potential as drug carriers in a pH-responsive controlled-release drug delivery system and as candidates for application in bone tissue engineering.

(9H-Carbazol-9-ylmeth-yl)diethyl-amine.

The asymmetric unit of the title compound, C(17)H(20)N(2), contains two mol-ecules, whose bond lengths and angles differ only slightly. In the crystal, neighbouring mol-ecules form pillar structures via edge-to-face π-π stacking inter-actions [edge-to-face distances = 3.538 (3) and 3.496 (3)Å].