Infusion fluids contain harmful glucose degradation products.

PURPOSE: Glucose degradation products (GDPs) are precursors of advanced glycation end products (AGEs) that cause cellular damage and inflammation. We examined the content of GDPs in commercially available glucose-containing infusion fluids and investigated whether GDPs are found in patients' blood. METHODS: The content of GDPs was examined in infusion fluids by high-performance liquid chromatography (HPLC) analysis. To investigate whether GDPs also are found in patients, we included 11 patients who received glucose fluids (standard group) during and after their surgery and 11 control patients receiving buffered saline (control group). Blood samples were analyzed for GDP content and carboxymethyllysine (CML), as a measure of AGE formation. The influence of heat-sterilized fluids on cell viability and cell function upon infection was investigated. RESULTS: All investigated fluids contained high concentrations of GDPs, such as 3-deoxyglucosone (3-DG). Serum concentration of 3-DG increased rapidly by a factor of eight in patients receiving standard therapy. Serum CML levels increased significantly and showed linear correlation with the amount of infused 3-DG. There was no increase in serum 3-DG or CML concentrations in the control group. The concentration of GDPs in most of the tested fluids damaged neutrophils, reducing their cytokine secretion, and inhibited microbial killing. CONCLUSIONS: These findings indicate that normal standard fluid therapy involves unwanted infusion of GDPs. Reduction of the content of GDPs in commonly used infusion fluids may improve cell function, and possibly also organ function, in intensive-care patients.

3,4-dideoxyglucosone-3-ene in peritoneal dialysis fluids infused into the peritoneal cavity cannot be found in plasma.

OBJECTIVE: Glucose degradation products (GDPs) are important for the outcome of peritoneal dialysis (PD) treatment. The most cytotoxic GDP found in conventionally manufactured fluids, 3,4-dideoxyglucosone-3-ene (3,4-DGE), may in addition be recruited from 3-deoxyglucosone (3-DG). What happens with the GDPs in the fluid infused into patients during PD is not known. We investigated whether 3,4-DGE and 3-DG in PD fluid can be found in plasma during treatment. DESIGN: Patients on PD were dialyzed with a conventional PD fluid containing 43 micromol/L 3,4-DGE and 281 micromol/L 3-DG. Parallel experiments were performed in rats and in vitro with human plasma. The rats were dialyzed with a PD fluid containing 100 micromol/L 3,4-DGE and 200 micromol/L 3-DG. RESULTS: The 3,4-DGE concentration in the peritoneum declined at a much higher rate during the dwell than did the 3-DG concentration. However, 3,4-DGE was not detected in the plasma of patients or of rats during dialysis. The 3-DG concentration in plasma peaked shortly after infusion of fluid into the peritoneal cavity. The 3,4-DGE concentration during experimental incubation in plasma declined rapidly; the 3-DG concentration declined only 10% as rapidly (or less). CONCLUSION: During dialysis, 3,4-DGE could not be detected in plasma of either PD patients or rats, presumably because of its high reactivity. On the other hand, 3-DG may pass through the membrane and be detected in the blood.

3,4-DGE in peritoneal dialysis fluids cannot be found in plasma after infusion into the peritoneal cavity.

OBJECTIVE: Glucose degradation products (GDPs) are important in the outcome of peritoneal dialysis (PD) treatment. 3,4-dideoxyglucosone-3-ene (3,4-DGE) is the most cytotoxic GDP found in conventionally manufactured fluids and may, in addition, be recruited from 3-deoxyglucosone (3-DG). It is not known what happens with those GDPs in patients during PD. The aim of this study was to investigate if the 3,4-DGE and 3-DG in PD fluids can be found in plasma during treatment. DESIGN: PD patients were dialyzed with a conventional PD fluid containing 43 micromol/L 3,4-DGE and 281 micromol/L 3-DG. Parallel experiments were performed in rats as well as in vitro with human plasma. The rats were dialyzed with a PD fluid containing 100 micromol/L 3,4-DGE and 200 micromol/L 3-DG. RESULTS: The concentration of 3,4-DGE in the peritoneum decreased at a much higher rate than 3-DG during the dwell. 3,4-DGE was not, however, detected in the plasma of patients or rats during dialysis. The concentration of 3-DG in plasma peaked shortly after infusion of the fluid to the peritoneal cavity. The concentration of 3,4-DGE during experimental incubation in plasma decreased rapidly, while the concentration of 3-DG decreased only 10% as rapidly or less. CONCLUSION: 3,4-DGE could not be detected in plasma from either PD patients or rats during dialysis. This is presumably due to its high reactivity. 3-DG may, on the other hand, pass through the membrane and be detected in the blood.

3,4-DGE is important for side effects in peritoneal dialysis what about its role in diabetes.

Breakdown of glucose under physiological conditions gives rise to glucose degradation products (GDPs). GDPs are also formed during heat sterilization of glucose-containing peritoneal dialysis fluids (PD-fluids). In PD-fluids GDPs have been shown in many different in vitro assays to be responsible for adverse effects such as growth inhibition, and impaired leukocyte function and impaired wound healing of peritoneal mesothelial cells. They have been linked to changes in the peritoneal membrane as well as to the decline in residual renal function of PD-patients. In diabetes one of the GDPs, 3-deoxyglucosone (3-DG), has been proposed as responsible for side-effects rather the glucose itself. 3,4-dideoxyglucosone-3-ene (3,4-DGE) was recently identified as the most bio-reactive GDP in PD-fluids. It exists in equilibrium with a pool of precursors, consisting of 3-DG but also of other hitherto unidentified GDPs. In PD-fluids the concentration of GDPs in this pool is 10-20 times as high as that of 3,4-DGE. In vitro 3,4-DGE induces caspase-dependent apoptosis of neutrophils and peripheral blood mononuclear cells. Such induction may explain immunosuppressive properties of 3,4-DGE and contribute to an impaired peritoneal antibacterial defense. 3,4-DGE also induces renal cell apoptosis. This may explain the better preservation of residual renal function in PD patients not exposed to GDPs. The concentration of 3-DG increases with worsening glycemic control and has been implicated in the genesis of diabetic microangiopathy. As 3,4-DGE is much more bio-reactive than 3-DG and as it may be easily recruited from the pool, it seems probable that 3,4-DGE is the molecule involved in the diabetic lesions rather than 3-DG itself. Thus, 3,4-DGE might contribute to diabetic nephropathy and to the impaired antibacterial defenses in diabetics. Unraveling of the pool dynamics of the GDPs and the molecular mechanisms of GDP-mediated cell injury may provide new therapeutic insights in PD and diabetes.

How to avoid glucose degradation products in peritoneal dialysis fluids.

OBJECTIVE: The formation of glucose degradation products (GDPs) during sterilization of peritoneal dialysis fluids (PDFs) is one of the most important aspects of biocompatibility of glucose-containing PDFs. Producers of PDFs are thus trying to minimize the level of GDPs in their products. 3,4-Dideoxyglucosone-3-ene (3,4-DGE) has been identified as the most bioreactive GDP in PDFs. It exists in a temperature-dependent equilibrium with a pool of 3-deoxyglucosone (3-DG) and is a precursor in the irreversible formation of 5-hydroxymethyl furaldehyde (5-HMF). The aim of the present study was to investigate how to minimize GDPs in PDFs and how different manufacturers have succeeded in doing so. DESIGN: Glucose solutions at different pHs and concentrations were heat sterilized and 3-DG, 3,4-DGE, 5-HMF, formaldehyde, and acetaldehyde were analyzed. Conventional as well as biocompatible fluids from different manufacturers were analyzed in parallel for GDP concentrations. RESULTS: The concentrations of 3-DG and 3,4-DGE produced during heat sterilization decreased when pH was reduced to about 2. Concentration of 5-HMF decreased when pH was reduced to 2.6. After further decrease to a pH of 2.0, concentration of 5-HMF increased slightly, and below a pH of 2.0 it increased considerably, together with formaldehyde; 3-DG continued to drop and 3,4-DGE remained constant. Inhibition of cell growth was paralleled by 3,4-DGE concentration at pH 2.0 - 6.0. A high glucose concentration lowered concentrations of 3,4-DGE and 3-DG at pH 5.5 and of 5-HMF at pH 1. At pH 2.2 and 3.2, glucose concentration had a minor effect on the formation of GDPs. All conventional PDFs contained high levels of 3,4-DGE and 3-DG. Concentrations were considerably lower in the biocompatible fluids. However, the concentration of 5-H M F was slightly higher in all the biocompatible fluids. CONCLUSION: The best way to avoid reactive GDPs is to have a pH between 2.0 and 2.6 during sterilization. If pHs outside this range are used, it becomes more important to have high glucose concentration during the sterilization process. There are large variations in GDPs, both within and between biocompatible and conventionally manufactured PDFs.

Take care in how you store your PD fluids: actual temperature determines the balance between reactive and non-reactive GDPs.

OBJECTIVE: During heat sterilization and during prolonged storage, glucose in peritoneal dialysis fluids (PDF) degrades to carbonyl compounds commonly known as glucose degradation products (GDPs). Of these, 3,4-dideoxyglucosone-3-ene (3,4-DGE) is the most cytotoxic. It is an intermediate in degradation between 3-deoxyglucosone (3-DG) and 5-hydroxymethyl-2-furaldehyde (5-HMF). We have earlier reported that there seems to be equilibrium between these GDPs in PDF. The aim of the present study was to investigate details of this equilibrium. METHODS: Aqueous solutions of pure 3-DG, 3,4-DGE, and 5-HMF were incubated at 40 degrees C for 40 days. Conventional and low-GDP fluids were incubated at various temperatures for up to 3 weeks. Formaldehyde, acetaldehyde, glyoxal, methylglyoxal, 3-DG, 3,4-DGE, and 5-HMF were analyzed using high performance liquid chromatography. RESULTS: Incubation of 100 micromol/L 3,4-DGE resulted in the production of 36 micromol/L 3-DG, 4 micromol/L 5-HMF, and 40 micromol/L unidentified substances. With the same incubation, 200 micromol/L 3-DG was converted to 9 micromol/L 3,4-DGE, 6 micromol/L 5-HMF, and 14 micromol/L unidentified substances. By contrast, 100 micromol/L 5-HMF was uninfLuenced byincubation. In a conventional PDF incubated at 60 degrees C for 1 day, the 3,4-DGE concentration increased from 14 to a maximum of 49 micromol/L. When the fluids were returned to room temperature, the concentration decreased but did not reach original values until after 40 days. In a low GDP fluid, 3,4-DGE increased and decreased in the same manner as in the conventional fluid but reached a maximum of only 0.8 micromol/L. CONCLUSIONS: Considerable amounts of 3,4-DGE may be recruited by increases in temperature in conventional PDFs. Lowering the temperature will again reduce the concentration but much more time will be needed. Precursors for 3,4-DGE recruitment are most probably 3-DG and the enol 3-deoxyaldose-2-ene, but not 5-HMF. Considering the ease at which 3,4-DGE is recruited from its pool of precursors and the difficulty of getting rid of it again, one should be extremely careful with the temperatures conventional PDFs are exposed to.

Temperature: the single most important factor for degradation of glucose fluids during storage.

OBJECTIVE: Bioincompatible glucose degradation products (GDPs) develop during heat sterilization of peritoneal dialysis (PD) fluids. However, degradation may also take place during storage. Consequently, storage may add to the bioincompatibility caused by heat sterilization. The aim of the present study was to investigate how different factors such as the sterilization procedure, pH, glucose concentration, and temperature influence GDP production during storage. DESIGN: Degradation in glucose solutions was followed by pH and UV absorbance at 228 nm and 284 nm over 2 years of storage. Different sterilization times, storage temperatures, pH, and glucose concentrations were included in the study. Peritoneal dialysis fluids were also used in the experiment. Bioincompatibility was estimated through inhibition of cell growth in L-929 fibroblasts, and GDPs through UV absorption and liquid chromatography. RESULTS: The most important factor determining the rate of GDP production during storage was temperature. The GDPs created by heat sterilization promoted further degradation of glucose during subsequent storage. A pH of around 3.2 protected glucose from degradation during both heat sterilization and storage. At a storage temperature of 20 degrees C and a pH of 3.2, degradation was almost negligible. Heat sterilization produced considerable amounts of GDPs absorbing at 228 nm. During initial storage, these 228 nm-absorbing GDPs almost disappeared. After reaching a nadir, absorbance at 228 nm again started to increase. Contrary to this, absorbance at 284 nm [caused mainly by 5-hydroxymethyl-2-furaldehyde (5-HMF)] increased during the whole storage period. After 2 years at 40 degrees C, the concentrations of GDPs produced during storage were of the same magnitude as those caused by heat sterilization. Inhibition of cell growth of L-929 fibroblasts correlated well with the part of the absorbance at 228 nm not caused by 5-HMF in glucose solutions that were heat sterilized under a wide range of conditions. This part of 228 nm absorbance (denoted 228corr) was caused almost entirely by 3,4-dideoxyglucosone-3-ene (3,4-DGE). CONCLUSIONS: Temperature is the single most important factor for glucose degradation during storage. The concentrations of bioincompatible GDPs produced may, under improper conditions, be as high as those produced during sterilization. High concentrations of glucose and low pH protect glucose from being degraded during both sterilization and storage. A good estimate of 3,4-DGE concentration in the fluids can be obtained correcting the UV absorbance at 228 nm for the influence from 5-HMF (and, when appropriate, for lactate). The 228corr may thus be used as a simple quality control for the fluids.

PD fluids contain high concentrations of cytotoxic GDPs directly after sterilization.

OBJECTIVE: Glucose degradation products (GDPs) in peritoneal dialysis (PD) fluids are cytotoxic and affect the survival of the peritoneal membrane. One of the most reactive GDPs in PD fluids is 3,4-dideoxyglucosone-3-ene (3,4-DGE). 3,4-DGE has been reported as an intermediate between 3-deoxyglucosone (3-DG) and 5-hydroxymethyl furaldehyde (5-HMF) during degradation of glucose. In PD fluids, 3,4-DGE exists in a temperature-dependent equilibrium with a pool of unidentified substances. The aim of this study was to explore this equilibrium and its temperature dependence during the first months of storage after the sterilization procedure. METHODS: GDPs and inhibition of cell growth (ICG) were measured directly after sterilization of the PD fluid and during storage at different temperatures for 60 days. The following GDPs were analyzed: 3-DG, 3,4-DGE, 5-HMF, formaldehyde, acetaldehyde, glyoxal, and methylglyoxal. RESULTS: Immediately after sterilization, the concentration of 3,4-DGE was 125 micromol/L. During the first weeks of storage, it decreased by about 80%. At the same time, the 3-DG concentration increased. None of the other GDPs were significantly affected. Cytotoxicity correlated well with the concentration of 3,4-DGE. When pure 3,4-DGE was substituted for the lost amount of 3,4-DGE after 30 days of storage, the initial ICG was almost completely regained. CONCLUSIONS: Heat sterilization of PD fluids promotes the formation of large quantities of 3,4-DGE, rendering the fluid highly cytotoxic. During storage, the main part of 3,4-DGE is reversibly converted in a temperature-dependent manner to a less cytotoxic pool, consisting mainly of 3-DG. Cytotoxicity seems to be dependent exclusively on 3,4-DGE. In order to avoid higher levels of 3,4-DGE concentrations, PD fluids should not be used too soon after sterilization and should not be stored at temperatures above room temperature.

3,4-Dideoxyglucosone-3-ene (3,4-DGE): a cytotoxic glucose degradation product in fluids for peritoneal dialysis.

BACKGROUND: Bioincompatible glucose degradation products (GDPs) in fluids for peritoneal dialysis (PD) develop during sterilization and storage. Their biological activity has successfully been monitored through the use of various in vitro methods but their molecular and chemical nature is less well understood. Many GDPs are highly reactive carbonyl compounds. Although some of the identified GDPs are extremely cytotoxic, none of them actually possess cytotoxicity at the concentrations found in PD fluids. Thus, the GDP responsible for the toxicity in PD fluids has not yet been identified. The intention of the present work was to investigate to what extent the unsaturated dicarbonyl compound, 3,4-dideoxyglucosone-3-ene (3,4-DGE) was present in PD fluids, and if it could be responsible for the in vitro effects on L-929 fibroblast cells. METHODS: A commercial preparation of 3,4-DGE and two different liquid chromatography methods were used for the chemical identification and quantification. In vitro bioincompatibility was determined as inhibition of cell growth using the L-929 fibroblast cell line. RESULTS: 3,4-DGE was present in conventionally manufactured PD fluids at a concentration of 9 to 22 micromol/L. In the newly developed PD fluid, Gambrosol trio, the concentrations were 0.3 to 0.7 micromol/L. When added as synthetic 3,4-DGE to cell growth media at the concentrations measured in conventional PD fluids, the inhibition of cell growth was significantly lower than for that seen with the conventional fluids. However, in the conventional PD fluids the total amount of 3,4-DGE available for toxic reactions most probably was higher than that measured, because 3,4-DGE was freshly recruited from a molecular pool when consumed. The speed of this recruitment was high enough to explain most of the growth inhibition seen for heat-sterilized PD fluids. CONCLUSION: 3,4-DGE is present in conventional PD fluids at a concentration between 9 and 22 micromol/L, and is the most biologically active of all GDPs identified to date. Thus, it is the main candidate to be held responsible for the clinical bioincompatibility caused by conventionally manufactured PD fluids.