RESUMO
PURPOSE: To compare the effect of graft fixation angle and tension in double-bundle anterior cruciate ligament (ACL) reconstruction on knee biomechanics. METHODS: Fourteen cadaver knees were tested using a robotic system under two loadings: (1) an 89-N anterior tibial load (ATL) at full extension (FE), 15°, 30°, 45°, 60°, and 90°, and (2) combined 7 N m valgus and 5 N m internal tibial torques (simulated pivot-shift test) at FE, 15° and 30°. Four graft fixation angles and tensions were used for the anteromedial (AM) and posterolateral (PL) bundles, respectively: (Recon 1) 30°/20N and FE/20N, (Recon 2) 30°/30N and FE/10N, (Recon 3) 45°/20N and 15°/20N, and (Recon 4) 45°/30N and 15°/10N. RESULTS: All fixation protocols closely restored the intact knee kinematics under ATL and simulated pivot-shift loading. For the AM bundle under ATL, the in situ force (ISF) with Recon 3 at the FE was significantly lower than that of the intact knee. For the PL bundle under ATL, the ISF with Recon 3 at the FE, 15° and 30° was significantly higher than that of the intact knee. In PL bundle under simulated pivot-shift loading, the ISF with Recon 1 and Recon 2 at FE was lower and the ISF of the PL bundle with Recon 3 at the 15° was higher than that of the intact knee. CONCLUSION: The AM-45°/30N and PL-15°/10N fixation most closely matched intact knee kinematics; however, stabilizing the knee during anterior tibial translation may risk an imbalance of the AM and the PL bundle loading. The results indicate that ACL bundle forces may not be restored even if the clinical assessment shows good results with the Lachman test and pivot-shift test. This may alter the loading on other structures of the knee.
Assuntos
Lesões do Ligamento Cruzado Anterior/cirurgia , Reconstrução do Ligamento Cruzado Anterior/métodos , Articulação do Joelho/fisiologia , Estresse Mecânico , Transplantes/fisiologia , Fenômenos Biomecânicos/fisiologia , Cadáver , Humanos , Articulação do Joelho/cirurgia , Pessoa de Meia-Idade , Tíbia/cirurgia , Torque , Transplantes/cirurgia , Suporte de Carga/fisiologiaRESUMO
PURPOSE: Knowledge of the effect of hip pathologies on hip biomechanics is important to the understanding of the development of osteoarthritis, and the contribution of the labrum to hip joint stability has had limited study. The purpose of this study was to evaluate the effect of labral injury to stability of the femoral head in the acetabular socket. METHODS: Ten cadaver hip specimens were tested using a robotic system under four different loading conditions: axial loading (80 N) along the femoral axis and axial loading (80 N) combined with either anterior, posterior or lateral loading (60 N). The hip states were examined were intact, with a 1.5 cm capsulotomy and with a 1 cm resection of the anterosuperior labrum. RESULTS: At 30° of flexion, under axial load, the displacement of the hip with capsulotomy and labral resection (9.6 ± 2.5 mm) was significantly larger then the hip with capsulotomy alone (5.6 ± 4.1 mm, p = 0.005) and the intact hip (5.2 ± 3.8 mm, p = 0.005). Also, at 30° of flexion, the displacement under combined axial and anterior/posterior load was increased with capsulotomy and labral resection. CONCLUSION: The acetabular labrum provides stability to the hip joint in response to a distraction force and combined distraction and translation forces. One centimetre of labral resection caused significant displacement ("wobbling" effect) of the femoral head within the acetabulum with normal range of motion. Successful labral repair could be crucial for restoration of the hip biomechanics and prevention of coxarthrosis.
Assuntos
Acetábulo/fisiologia , Articulação do Quadril/fisiologia , Amplitude de Movimento Articular/fisiologia , Adulto , Fenômenos Biomecânicos , Cadáver , Cartilagem Articular/fisiologia , Feminino , Fêmur , Cabeça do Fêmur/fisiologia , Fibrocartilagem/fisiologia , Humanos , Instabilidade Articular/fisiopatologia , Masculino , Pessoa de Meia-Idade , Osteoartrite do Quadril/fisiopatologiaRESUMO
PURPOSE: The purpose of this study was to measure the semitendinosus tendon graft shift at the tunnel aperture with graft bending using a simulated femoral bone tunnel. METHODS: Eight semitendinosus tendon grafts were used in this study. The median age of the specimen was 53 years (range 46-63). After stripping excess soft tissue, the semitendinosus tendon was doubled over the loop of the EndoButton CL (Smith and Nephew Inc.). The diameter of the graft was measured using a graft-sizing tube (Smith and Nephew Inc.) and verified to be 7.0 mm. A custom-made aluminium fixture, the size was 40.0 mm(3), with 7.0-mm-diameter hole was used as a simulated femoral bone tunnel. The graft was inserted to the tunnel, and EndoButton was positioned to the outside of the tunnel on the fixture. The distal end of the graft was tensioned with 30 N at an angle of 15°, 30°, 45°, 60°, 75° that reproduced the graft bending angle during knee range of motion. The photograph of the tunnel aperture was taken at each graft bending angle using a digital camera, and the graft shift amount in the simulated tunnel was analysed using the computer software (ImageJ). RESULTS: The amount of the graft shift significantly increased when the graft bending angle was increased (P < 0.05). The biggest shift was observed when the graft bending angle was 75° in all specimens, and the value was 1.10 mm ± 0.12. CONCLUSION: The present study suggests that even if the femoral tunnel was created in the centre of the ACL insertion site, the graft shifted within the tunnel in the direction of the tension applied to the graft during knee range of motion. Surgeons may have to consider the graft shift within the bone tunnel as well as the tunnel position in the restoration of the native ACL anatomy.
Assuntos
Reconstrução do Ligamento Cruzado Anterior/métodos , Fêmur/cirurgia , Tendões dos Músculos Isquiotibiais/transplante , Transplantes/transplante , Cadáver , Feminino , Humanos , Masculino , Pessoa de Meia-IdadeRESUMO
BACKGROUND: The purpose of our study was to evaluate the relationship between graft placement and in situ graft force after anterior cruciate ligament (ACL) reconstruction. METHODS: Magnetic resonance imaging (MRI) was obtained for twelve human cadaveric knees. The knees, in intact and deficient-ACL states, were subjected to external loading conditions as follows: an anterior tibial load of 89 N at 0°, 15°, 30°, 45°, 60°, and 90° of flexion and a combined rotatory (simulated pivot-shift) load of 5 Nm of internal tibial torque and 7 Nm of valgus torque at 0°, 15°, and 30° of flexion. Three ACL reconstructions were performed in a randomized order: from the center of the tibial insertion site to the center of the femoral insertion site (Mid), the center of the tibial insertion site to a more vertical femoral position (S1), and the center of the tibial insertion site to an even more vertical femoral position (S2). The reconstructions were tested following the same protocol used for the intact state, and graft in situ force was calculated for the two loadings at each flexion angle. MRI was used to measure the graft inclination angle after each ACL reconstruction. RESULTS: The mean inclination angle (and standard deviation) was 51.7° ± 5.0° for the native ACL, 51.6° ± 4.1° for the Mid reconstruction (p = 0.85), 58.7° ± 5.4° for S1 (p < 0.001), and 64.7° ± 6.5° for S2 (p < 0.001). At 0°, 15°, and 30° of knee flexion, the Mid reconstruction showed in situ graft force that was closer to that of the native ACL during both anterior tibial loading and simulated pivot-shift loading than was the case for S1 and S2 reconstructions. At greater flexion angles, S1 and S2 had in situ graft force that was closer to that of the native ACL than was the case for the Mid reconstruction. CONCLUSIONS: Anatomic ACL reconstruction exposes grafts to higher loads at lower angles of knee flexion. CLINICAL RELEVANCE: Rehabilitation and return to sports progression may need to be modified to protect an anatomically placed graft after ACL reconstruction.
Assuntos
Reconstrução do Ligamento Cruzado Anterior/métodos , Ligamento Cruzado Anterior/transplante , Artroscopia , Instabilidade Articular/prevenção & controle , Articulação do Joelho/fisiologia , Técnicas de Sutura , Cadáver , Humanos , Amplitude de Movimento Articular , Suporte de Carga/fisiologiaRESUMO
PURPOSE: Quadriceps tendon grafts have renewed interest for ACL reconstruction; however, biomechanical studies comparing anatomic single-bundle (SB) and double-bundle (DB) reconstruction techniques are rare. The purpose of this study was to compare the knee biomechanics in four different types of anatomic ACL reconstruction techniques, using the quadriceps tendon in a human cadaver. METHODS: Four different tibial (T) and femoral (F) tunnel configurations, (a) DB-2F-2T, (b) DB-2F-1T, (c) SB-1F-1T and (d) DB-1F-2T, were used for ACL reconstruction using the split quadriceps tendon with patella bone. Ten cadaver knees were subjected to an 89 N anterior tibial load and combined 7 N m valgus and 5 N m internal torques. The anterior tibial translation (ATT) and in situ force were measured using a robotic system for the ACL-intact, ACL-deficient and ACL-reconstructed knees. RESULTS: DB reconstructions mostly restored ATT to the intact ACL. The in situ forces under the anterior load in the DB reconstructions were similar to the intact ACL, but that of the SB reconstruction was different at 30°, 60° and 90° of flexion (P < 0.05). Under combined torques, the in situ force of the SB graft was less than that of intact ACL at 0°, 15° and 30° of knee flexion (P < 0.05), while that of the ACL DB reconstruction was similar to the intact ACL. CONCLUSION: DB ACL reconstruction using quadriceps tendon can restore biomechanics of the knee to that of the intact ACL regardless of whether three or four tunnels are used, but SB reconstruction does not.
Assuntos
Reconstrução do Ligamento Cruzado Anterior/métodos , Ligamento Cruzado Anterior/cirurgia , Articulação do Joelho/fisiologia , Tendões/transplante , Idoso , Fenômenos Biomecânicos , Transplante Ósseo , Fêmur/fisiologia , Fêmur/cirurgia , Humanos , Articulação do Joelho/cirurgia , Masculino , Pessoa de Meia-Idade , Patela/transplante , Amplitude de Movimento Articular , Robótica , Tendões/fisiologia , Tíbia/fisiologia , Tíbia/cirurgia , Torque , Suporte de CargaRESUMO
PURPOSE: This study investigated the effect of damage of the posterior and anterior horns of the medial meniscus on knee stability. METHODS: Twenty fresh-frozen porcine knees were divided into two groups (anterior horn and posterior horn injury). Each group was tested in three states: intact medial meniscus, posterior or anterior horn of medial meniscus resection and total medial meniscectomy. A robotic testing system was used to test anterior tibial translation (ATT) at 30° (full extension), 60° and 90° of knee flexion with an external anterior tibial load of 89 N, internal rotation (IR) and external rotation (ER) at 30° and 60° of knee flexion under a 4 N m tibial rotation torque. RESULTS: In response to an IR torque, there was a significant difference between the state of intact medial meniscus and anterior and posterior horn damage, except for anterior horn resection at 60° of knee flexion. In response to an ER torque, there were no significant differences between the state of intact meniscus and horn damage except for anterior horn resection at 30° of knee flexion. Meniscal damage had no significant effect on ATT. CONCLUSION: The results indicated that the posterior horn was more important in controlling the IR stability than the anterior horn with knee flexion, and the anterior horn was more important in controlling the ER stability than the posterior horn at full knee extension in the anterior cruciate ligament-intact knee. These findings further the understanding of the mechanisms, the prevention of injuries and rehabilitation of meniscal horn injury in clinical practice.
Assuntos
Instabilidade Articular/fisiopatologia , Joelho de Quadrúpedes/fisiopatologia , Lesões do Menisco Tibial , Animais , Fenômenos Biomecânicos , Modelos Animais , Amplitude de Movimento Articular/fisiologia , Suínos , TorqueRESUMO
PURPOSE: To investigate the effect of graft fixation sequence in double-bundle anterior cruciate ligament (ACL) reconstruction on knee biomechanics. METHODS: Twelve mature porcine knees underwent double-bundle ACL reconstruction with a randomized fixation order of the two graft bundles. The knees were subjected to external loadings of (1) an 89 N anterior tibial load at 30°, 60° and 90° of knee flexion and (2) 4 N-m internal and external tibial torques at 30° and 60° of knee flexion for ACL intact, deficient and reconstructed states. Knee kinematics and in situ graft forces were measured under the applied loads. RESULTS: The anterior tibial translation of the two reconstructions was not different from each other but was significantly different from the intact ACL. There was no difference in internal and external rotations between the intact knees and the reconstructions. At lower flexion angles, the graft that was fixed last (whether anteromedial or posterolateral) tended to carry significantly higher in situ load under anterior tibial loading and tibial torques. CONCLUSION: While a difference in knee kinematics may not be observable with different graft fixation sequences, fixation sequence can alter the in situ forces that the grafts bear under knee loading.
Assuntos
Reconstrução do Ligamento Cruzado Anterior/métodos , Ligamento Cruzado Anterior/cirurgia , Articulação do Joelho/fisiologia , Animais , Artroscopia , Fenômenos Biomecânicos , Articulação do Joelho/cirurgia , Distribuição Aleatória , Amplitude de Movimento Articular , Rotação , Suínos , Tendões/transplante , Tíbia/fisiologia , Tíbia/cirurgia , Torque , Suporte de CargaRESUMO
BACKGROUND: It is commonly accepted that the anterolateral (AL) bundle of the posterior cruciate ligament (PCL) is tight in flexion and that the posteromedial (PM) bundle is tight in extension. However, a recent in vivo study showed that both bundles were tight in extension. PURPOSE: To investigate the effects of knee flexion angle, rotational torque, and anterior/posterior translational force on the end-to-end distance between the femoral and tibial insertion sites of each bundle of the PCL. STUDY DESIGN: Descriptive laboratory study. METHODS: Cadaveric knees (10 specimens) were mounted on a robotic system, and the relative positional data between the femur and tibia were acquired during passive flexion/extension, with an applied 5-N·m rotational torque and an applied 89-N translational force. The bony surface and PCL insertion data were acquired with a 3-dimensional scanner after gross dissection and were superimposed onto the positional data. The end-to-end distance between the 2 PCL insertion sites of the femur and tibia was measured. RESULTS: The end-to-end distance increased from full extension to 90° for both the AL (9.2 ± 1.8 mm; from 30.0 to 39.2 mm) and PM bundles (5.8 ± 2.2 mm; from 32.0 to 37.7 mm). With an internal rotational torque, the end-to-end distance of the PM bundle increased significantly (P < .05) at 0°, 30°, and 60° of knee flexion. Under a posterior translational force at 90° of knee flexion, the length of both bundles increased to their longest measurements (AM bundle: 40.6 ± 4.2 mm; PM bundle: 38.4 ± 3.8 mm). CONCLUSION: The end-to-end distance of the AL and PM bundles of the PCL increased in flexion, and this pattern was maintained during tests with posterior translational force. The PM bundle was more affected by the rotational torque than was the AL bundle. CLINICAL RELEVANCE: Both bundles of the PCL may serve a greater functional role in flexion than in extension. The PM bundle might be more important for the control of rotation than the AL bundle. Posterior translation at 90° of knee flexion could be the most stressful condition for both bundles of the PCL, which may have implications for an injury mechanism.
Assuntos
Articulação do Joelho/fisiologia , Ligamento Cruzado Posterior/fisiologia , Idoso , Cadáver , Feminino , Humanos , Imageamento Tridimensional , Masculino , Pessoa de Meia-Idade , Amplitude de Movimento Articular/fisiologia , Robótica , Rotação , TorqueRESUMO
PURPOSE: Many anatomical anterior cruciate ligament (ACL) studies have indicated that the human ACL is composed of two functional bundles: the antero-medial (AM) and postero-lateral (PL). The purpose of this study is to compare the ACL anatomy among human and assorted animal species. METHODS: Twenty fresh-frozen knees specimen were used: five humans, ten porcine, one goat, one Kodiak bear, one African lion, one Diana monkey and one Gazelle antelope. All the specimens were dissected to expose the ACL and to visualize the number of bundles and attachment patterns on the tibia and femur. Following the fibre orientation of the individual bundles, a wire loop was used to bluntly separate the bundles starting from the tibial insertion site to the femoral insertion site. In the human and porcine ACL, each bundle was separated into approximately 2 mm diameter segments and then tracked in order to establish the individual bundle's specific pattern of insertion on the femur and tibia. RESULTS: It appeared that all human and animal knee specimens had three bundles that made up their ACL. In addition, it was noted that among the various specimens species, all viewed with an anterior view, and at 90° knee flexion, the ACL bony insertion sites had similar attachment patterns. CONCLUSION: In all the specimens, including human, the ACL had three distinct bundles: AM, intermediate (IM) and PL. The bundles were composed of multiple fascicles arranged in a definite order and similar among the different species.
Assuntos
Ligamento Cruzado Anterior/anatomia & histologia , Animais , Fêmur/anatomia & histologia , Humanos , Joelho/anatomia & histologia , Masculino , Pessoa de Meia-Idade , Joelho de Quadrúpedes/anatomia & histologia , Tíbia/anatomia & histologiaRESUMO
INTRODUCTION: Notchplasty is frequently performed by many orthopaedic surgeons during anterior cruciate ligament (ACL) reconstruction. The effect of notchplasty on tunnel placement and knee biomechanics with ACL reconstruction is not known. METHODS: Twelve (n = 12) porcine knees were tested using a robotic testing system. Four knee states were compared: (1) intact ACL, (2) ACL-deficient, (3) anatomic single bundle (SB) ACL reconstruction and (4) anatomic SB ACL reconstruction with a 5-mm notchplasty. The graft was fixed at 60° of flexion (full extension of porcine knee is 30°) with an 80-N tension. The knees were subjected to two loading conditions: an 89-N anterior tibial load (ATT) and 4 Nm internal (IR) and external tibial (ER) rotational torques. The kinematics and in situ force obtained from the different knee conditions were compared. RESULTS: There were no significant differences between pre- and post-notchplasty in the ER at 30° and 60° of knee flexion (n.s.). However, a significant difference was found between pre- and post-notchplasty in ATT at 30° and 60° of flexion (p < 0.05). The in situ force in the anatomic SB reconstruction with notchplasty was significant lower than the intact and anatomic reconstructed ACL pre-notchplasty at 30°, 60° and 90° of knee flexion (p < 0.05). In response to the IR tibial torque, there were significant differences between pre- and post-notchplasty in IR at 60° (p < 0.05) of knee flexion. CONCLUSION: Notchplasty had greater effect on anterior stability than rotational stability. This change in knee kinematics could be detrimental to a healing bone graft, ligamentization and could lead to failure of the reconstruction in early post-operative period.
Assuntos
Reconstrução do Ligamento Cruzado Anterior/métodos , Joelho de Quadrúpedes/fisiologia , Joelho de Quadrúpedes/cirurgia , Animais , Artroscopia , Fenômenos Biomecânicos , Instabilidade Articular/cirurgia , Amplitude de Movimento Articular/fisiologia , Suínos , Torque , Suporte de Carga/fisiologiaRESUMO
PURPOSE: The aim of this study was to determine the end-to-end distance changes in anterior cruciate ligament (ACL) fibers during flexion/extension and internal/external rotation of the knee. METHODS: The positional relation between the femur and tibia of 10 knees was digitized on a robotic system during flexion/extension and with an internal/external rotational torque (5 Nm). The ACL insertion site data, acquired by 3-dimensional scanning, were superimposed on the positional data. The end-to-end distances of 5 representative points on the femoral and tibial insertion sites of the ACL were calculated. RESULTS: The end-to-end distances of all representative points except the most anterior points were longest at full extension and shortest at 90°. The distances of the anteromedial (AM) and posterolateral (PL) bundles were 37.2 ± 2.1 mm and 27.5 ± 2.8 mm, respectively, at full extension and 34.7 ± 2.4 mm and 20.7 ± 2.3 mm, respectively, at 90°. Only 4 knees had an isometric point, which was 1 of the 3 anterior points. Under an internal torque, both bundles became longer with statistical meaning at all flexion angles (P = .005). The end-to-end distances of all points became longest with internal torque at full extension and shortest with an external torque at 90°. CONCLUSIONS: Only 4 of 10 specimens had an isometric point at a variable anterior point. The end-to-end distances of the AM and PL bundles were longer in extension and shorter in flexion. CLINICAL RELEVANCE: The nonisometric tendency of the ACL and the end-to-end distance change during knee flexion/extension and internal/external rotation should be considered during ACL reconstruction to avoid overconstraint of the graft.
Assuntos
Ligamento Cruzado Anterior/cirurgia , Fêmur/cirurgia , Articulação do Joelho/cirurgia , Tíbia/cirurgia , Idoso , Ligamento Cruzado Anterior/anatomia & histologia , Ligamento Cruzado Anterior/fisiopatologia , Fenômenos Biomecânicos , Pesos e Medidas Corporais , Cadáver , Feminino , Humanos , Articulação do Joelho/fisiopatologia , Masculino , Pessoa de Meia-Idade , Amplitude de Movimento Articular , Robótica , Rotação , Estresse Mecânico , TorqueRESUMO
PURPOSE: The purpose of this study was to compare knee kinematics and in situ forces of the graft between 2 femoral fixation techniques of anterior cruciate ligament (ACL) reconstruction: the over-the-top (OTT) fixation and transphyseal (TP) techniques. METHODS: ACL reconstruction in skeletally immature patients is a challenging procedure. Regarding the femoral fixation techniques, 2 methods are commonly used: the OTT fixation and TP techniques. Ten cadaveric knees (mean age, 57 years; range, 48 to 65 years) were tested with the robotic/universal force-moment sensor system by use of (1) an 89-N anterior tibial load at full extension and 15°, 30°, 60°, and 90° of knee flexion and (2) a combined 7-Nm valgus torque and 5-Nm internal tibial rotation torque at 15° and 30° of knee flexion. RESULTS: Both OTT and TP ACL reconstruction techniques closely restored the intact knee kinematics and had a significant reduction in anterior tibial translation under an anterior tibial load and in coupled anterior tibial translation under a combined rotatory load when compared with an ACL-deficient knee. When both ACL reconstruction techniques were compared, the only difference found was that the in situ force of the ACL graft reconstructed with the OTT technique in response to a combined rotatory load at 30° of flexion was significantly lower than the ACL graft reconstructed with the TP technique (5.3 ± 3.3 N and 10.7 ± 6.0 N, respectively; P = .013). CONCLUSIONS: This time 0 testing showed that both ACL reconstruction techniques, OTT and TP, can reproduce the kinematics of the intact knee in response to an anterior tibial load and a combined rotatory load. CLINICAL RELEVANCE: Both femoral fixation techniques exhibited comparable time 0 kinematics when subjected to simulated clinical examination loading conditions.
Assuntos
Ligamento Cruzado Anterior/cirurgia , Transplante Ósseo/métodos , Fêmur/cirurgia , Tendões/transplante , Tíbia/cirurgia , Idoso , Lesões do Ligamento Cruzado Anterior , Fenômenos Biomecânicos , Parafusos Ósseos , Cadáver , Epífises/lesões , Fêmur/crescimento & desenvolvimento , Humanos , Complicações Intraoperatórias/prevenção & controle , Pessoa de Meia-Idade , Robótica , Rotação , Técnicas de Sutura , Tíbia/crescimento & desenvolvimento , Torque , Suporte de CargaRESUMO
BACKGROUND: High tunnel placement is common in single- and double-bundle anterior cruciate ligament (ACL) reconstructions. Similar nonanatomic tunnel placement may also occur in ACL augmentation surgery. PURPOSE: In this study, in situ forces and knee kinematics were compared between nonanatomic high anteromedial (AM) and anatomic AM augmentation in a knee with isolated AM bundle injury. STUDY DESIGN: Controlled laboratory study. METHODS: Seven fresh-frozen cadaver knees were used (age, 48 ± 12.5 years). First, intact knee kinematics was tested with a robotic-universal force sensor testing system under 2 loading conditions. An 89-N anterior load was applied, and an anterior tibial translation was measured at knee flexion angles of 0°, 30°, 60°, and 90°. Then, combined rotatory loads of 7-N·m valgus and 5-N·m internal tibial rotation were applied at 15° and 30° of knee flexion angles, which mimic the pivot shift. Afterward, only the AM bundle of the ACL was cut arthroscopically, keeping the posterolateral bundle intact. The knee was again tested using the intact knee kinematics to measure the in situ force of the AM bundle. Then, arthroscopic anatomic AM bundle reconstruction was performed with an allograft, and the knee was tested to give the in situ force of the reconstructed AM bundle. Knee kinematics under the 3 conditions (intact, anatomic AM augmentation, and nonanatomic high AM augmentation) and the in situ force were compared and analyzed. RESULT: The high AM graft had significantly lower in situ force than the intact and anatomic reconstructed AM bundle at 0° of knee flexion (P < .05) and the intact AM bundle at 30° of knee flexion under anterior tibial loading. There were no differences between anatomic graft and intact AM bundle. The high AM graft also had a significantly lower in situ force than the intact and anatomic reconstructed AM with simulated pivot-shift loading at 15° and 30° of flexion (P < .05). Under anterior tibial and rotatory loading, there was a difference in tibial displacement between anatomic and high AM reconstructions and between the high AM graft and intact ACL under rotational loading with the knee at 15° of flexion. CLINICAL RELEVANCE: Anatomic AM augmentation can lead to biomechanical advantages at time zero when compared with the nonanatomic (high AM) augmentation. Anatomic AM augmentation better restores the knee kinematics to the intact ACL state.
Assuntos
Ligamento Cruzado Anterior/cirurgia , Articulação do Joelho/fisiologia , Transferência Tendinosa/métodos , Adulto , Lesões do Ligamento Cruzado Anterior , Fenômenos Biomecânicos , Cadáver , Humanos , Articulação do Joelho/cirurgia , Pessoa de Meia-Idade , Procedimentos de Cirurgia Plástica/métodos , Rotação , Ruptura/cirurgia , Estresse MecânicoRESUMO
The meniscofemoral ligament (MFL) is a major structure in the posterior aspect of the porcine knee together with the posterior cruciate ligament (PCL). While the porcine knee is a frequently used animal model for biomechanical evaluation of PCL reconstruction techniques, the contribution of the MFL to stability of the porcine knee is not well understood. The purpose of this study is (1) to evaluate the kinematics of the knee after sequential cutting of the PCL and MFL and (2) to determine the in situ forces of the PCL and MFL in response to a posterior tibial load of 89 N using the robotic/universal force-moment sensor system from 15 degrees to 90 degrees of knee flexion. Ten porcine knees were used in this study. The magnitude of posterior tibial translation under a posterior tibial load was significantly increased (P < 0.01) after sequential transection of the PCL and the MFL at each testing angle compared to the intact condition. The in situ force of the PCL was highest at 60 degrees of flexion (82.3 +/- 8.6 N) and lowest at 15 degrees of flexion (45.1 +/- 15.9 N). The in situ force of the MFL was highest at 15 degrees of flexion (24.3 +/- 6.5 N) and lowest at 90 degrees of flexion (12.9 +/- 10.5 N). The findings in this study revealed a biomechanical contribution of the MFL as the secondary restraint to the posterior tibial translation in conjunction with the PCL especially near full extension.
Assuntos
Joelho/fisiologia , Ligamentos Articulares/fisiologia , Animais , Fenômenos Biomecânicos , Modelos Animais de Doenças , Humanos , Articulação do Joelho/fisiologia , Ligamento Cruzado Posterior/fisiologia , Sus scrofa , Suporte de CargaRESUMO
Several species of animals are used as a model to study human anterior cruciate ligament (ACL) reconstruction. In many animals, three bundles were clearly discernible during dissection in the ACL. However, there are few reports about the biomechanical role of each bundle in the porcine knee. The purpose of this study is to investigate the role of each of the three bundles in the porcine knee, especially the intermediate bundle. Ten porcine knees were tested using a robotic/universal forcemoment sensor system. This system applied anterior loading of 89 N at 30 degrees, 60 degrees and 90 degrees of flexion, and a combined 7 Nm valgus and 4 Nm internal tibial torque at 30 degrees and 60 degrees of flexion before and after each bundle was selectively cut. The in situ force (N) for each bundle of the ACL was measured. Both intermediate (IM) bundle and postero-lateral (PL) bundle had significantly lower in situ force than the antero-medial (AM) bundle in anterior loading. The IM and PL bundles carried a larger proportion of the force under the torsional loads than the anterior loads. But IM bundle had a significant lower in situ force during the combined torque at 60 degrees of knee flexion, when compared intact ACL. In summary, IM bundle has a subordinate role to the AM and PL bundles. AM bundle is more dominant than IM and PL bundles. The porcine knee is a suitable model for ACL studies, especially for AP stability.