Antimicrobial Composites Based on Methacrylic Acid-Methyl Methacrylate Electrospun Fibers Stabilized with Copper(II).

This study presents fibers based on methacrylic acid-methyl methacrylate (Eudragit L100) as Cu(II) adsorbents, resulting in antimicrobial complexes. Eudragit L100, an anionic copolymer synthesized by radical polymerization, was electrospun in dimethylformamide (DMF) and ethanol (EtOH). The electrospinning process was optimized through a 22-factorial design, with independent variables (copolymer concentration and EtOH/DMF volume ratio) and three repetitions at the central point. The smallest average fiber diameter (259 ± 53 nm) was obtained at 14% w/v Eudragit L100 and 80/20 EtOH/DMF volume ratio. The fibers were characterized using scanning electron microscopy (SEM), infrared spectroscopy in attenuated total reflectance mode (FTIR-ATR), and differential scanning calorimetry (DSC). The pseudo-second-order mechanism explained the kinetic adsorption toward Cu(II). The fibers exhibited a maximum adsorption capacity (qe) of 43.70 mg/g. The DSC analysis confirmed the Cu(II) absorption, indicating complexation between metallic ions and copolymer networks. The complexed fibers showed a lower degree of swelling than the non-complexed fibers. The complexed fibers exhibited bacteriostatic activity against Gram-negative (Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus) bacteria. This study successfully optimized the electrospinning process to produce thin fibers based on Eudragit L100 for potential applications as adsorbents for Cu(II) ions in aqueous media and for controlling bacterial growth.

Formation and Characterization of Oregano Essential Oil Nanocapsules Applied onto Polyester Textile.

Oregano essential oil was encapsulated in poly-ϵ-caprolactone nanoparticles by a nanoprecipitation method using glycerin as a moisturizer. Nanocapsule characterization was performed by measuring the particle size, colloidal stability and encapsulation efficiency using dynamic light scattering, UV-Vis spectrophotometry and scanning electron microscopy (SEM). The nanoparticles had a mean particle size of 235 nm with a monomodal distribution. In addition, a low polydispersity index was obtained, as well as a negative zeta potential of -36.3 mV and an encapsulation efficiency of 75.54%. Nanocapsules were applied to polyester textiles through bath exhaustion and foulard processing. Citric acid and a resin were applied as crosslinking agents to improve the nanocapsules' adhesion to the fabric. The adsorption, desorption, moisture content and essential oil extraction were evaluated to determine the affinity between the nanocapsules and the polyester. The adsorption was higher when the citric acid and the resin were applied. When standard oregano nanocapsules were used, almost all of the impregnated nanoparticles were removed when washed with water. The moisture content was evaluated for treated and non-treated textiles. There was a significant increase in the moisture content of the treated polyester compared to the non-treated polyester, which indicates that the polyester hydrophilicity increased with an important absorption of the essential oil nanocapsules; this can improve fabric comfort and probably promote antibacterial properties.

Direct Synthesis of HKUST-1 onto Cotton Fabrics and Properties.

Metal-organic frameworks are crystalline nanostructures formed by a metal interspersed by an organic binder. These metal-organic materials are examples of nanomaterials applied to textile material in search of new functionalized textiles. Cotton is a cellulosic fiber of great commercial importance, and has good absorption capacity and breathability; however, due to these characteristics, it is susceptible to the development of microorganisms on its surface. This work aims to analyze how the direct synthesis of HKUST-1 in cotton fabric modifies the chemical and physical properties. The material obtained was characterized by scanning electron microscopy to obtain its morphology, by spectrophotometry CIE L*a*b* to verify the color change, by a biological test to verify its resistance to microorganisms and, finally, by a unidirectional traction test to verify the change in its mechanical resistance. Thereby, it was possible to observe the formation of MOFs with the morphology of nanorods, and also, with regard to HKUST-1 in the cotton fabric, when applied, an elimination percentage higher than 99% was observed for both bacteria, E. coli and S. aureus. The presence of MOF was detected even after washing, however, the loss of 75% in the mechanical resistance of the material makes its potential for textile finishing unworkable.

Increased Comfort of Polyester Fabrics.

The hydrophilicity of fibers is directly related to the comfort of a fabric and represents one of the most important aspects of a textile. Therefore, polyester (PES) modification has focused on an increase in moisture content and a subsequent improvement of the user's experience. Based on the glycerol hygroscopic properties, the main objective has been the enhancement of the hydrophilicity of polyester by glycerol treatments. Furthermore, microwave irradiation and alkaline treatment have been applied, in order to increase glycerol adhesion. Treated PES samples were characterized by performing moisture content, negative ion, water diffusion and water vapor resistance analyses. The effect of different treatment conditions such as bath ratio (1/10 or 1/15), temperature (40, 60 or 100 °C), time (2 or 5 min) and microwave radiation intensity (300 or 500 W) was evaluated. The moisture content of treated PES results indicated that by decreasing the bath ratio and increasing the time and temperature the moisture gain can reach almost 14%, which can be easily related to increases in the weight of the fiber. The treatment with alkali was done and led to the highest moisture increase. Treatment with 500 W microwave irradiation led to higher glycerol retention after rinsing. Different experimental conditions were applied to the glycerol-treated PES fabrics, and a clear improvement in moisture content was obtained increasing the comfort. The results were compared with the ones obtained for cotton and wool, where the moisture is higher than non treated PES.

In-Situ Direct Synthesis of HKUST-1 in Wool Fabric for the Improvement of Antibacterial Properties.

The use of Metal-Organic Frameworks (MOF) such as HKUST-1 in textiles is an alternative with regard to the development of technologies that are increasingly seeking for functionalities, mainly in the fields of health and hygiene, named biofunctional fabrics. However, the application of the MOF under the surface of the wool fiber can lead to a low durability finish due to its low fixation. Thus, this project aims to perform the direct synthesis of HKUST in the wool fiber, so that a product with good washing durability can be obtained. The purpose of this study was to incorporate metal-organic frameworks, composed of copper and trimesic acid, into woolen fabrics, to improve the antibacterial properties. The synthesis was performed directly in the wool fabric, at time intervals of 24 and 48 h. The resulting fabrics were characterized by Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), X-Ray Diffractometry (XRD), Fourier Transform Spectroscopy Infrared-Attenuated Total Reflectance (FTIR-ATR), and colorimetric analysis (CIElab), and the Antimicrobial Activity Test (American Association of Textile Chemist and Colourists - AATCC Test Method 61-2007-2A) was performed. The results suggested that the application produced textiles with antibacterial properties, showing activity against Escherichia coli.

Inclusion Complexes of Citronella Oil with ß-Cyclodextrin for Controlled Release in Biofunctional Textiles.

Biofunctional textiles with integrated drug-delivery systems can help in the fight against vector-borne diseases. The use of repellent agents derived from plants and oils is an alternative to DEET (N,N-diethyl-m-methylbenzamide), which has disadvantages that include toxic reactions and skin damage. However, some researchers report that oils can be ineffective due to reasons related to uncontrolled release. In this work, the mechanism of control of citronella oil (OC) complexed with ß-cyclodextrin (ßCD) on cotton (COT) and polyester (PES) textiles was investigated. The results obtained reveal that finishing cotton and polyester with ß-cyclodextrin complexes allows for control of the release mechanism of the drug from the fabric. To assess the complexes formed, optical microscopy, SEM, and FTIR were carried out; the yield of complex formation was obtained by spectroscopy in the ultraviolet region; and controlled release was performed in vitro. Oil complexation with ßCD had a yield of 63.79%, and it was observed that the release, which was in seconds, moved to hours when applied to fabrics. The results show that complexes seem to be a promising basis when it comes to immobilizing oils and controlling their release when modified with chemical crosslinking agents.