Natural inactivation of Escherichia coli in anaerobic and reduced groundwater.

AIMS: Inactivation rates of Escherichia coli in groundwater have most often been determined in aerobic and oxidized systems. This study examined E. coli inactivation rates in anaerobic and extremely reduced groundwater systems that have been identified as recharge zones. METHODS AND RESULTS: Groundwater from six artesian wells was diverted to above-ground, flow-through mesocosms that contained laboratory grown E. coli in diffusion chambers. All groundwater was anaerobic and extremely reduced (ORP < -300 mV). Cells were plated onto mTEC agar during 21-day incubation periods. All data fit a bi-phasic inactivation model, with >95% of the E. coli population being inactivated <11·0 h (mean k = 0·488 ±0·188 h(-1) ). CONCLUSIONS: The groundwater geochemical conditions enhanced the inactivation of E. coli to rates approx. 21-fold greater than previously published inactivation rate in groundwater (mean k = 0·023 ± 0·030 h(-1) ). Also, mTEC agar inhibits E. coli growth following exposure to anaerobic and reduced groundwater. SIGNIFICANCE AND IMPACT OF THE STUDY: Aquifer recharge zones with geochemical characteristics observed in this study complement above-ground engineered processes (e.g. filtration, disinfection), while increasing the overall indicator micro-organism log-reduction rate of a facility.

The occurrence of lysogenic bacteria and microbial aggregates in the lakes of the McMurdo Dry Valleys, Antarctica.

The McMurdo Dry Valleys of Antarctica form the coldest and driest ecosystem on Earth. Within this region there are a number of perennially ice-covered (3-6 m thick) lakes that support active microbial assemblages and have a paucity of metazoans. These lakes receive limited allochthonous input of carbon and nutrients, and primary productivity is limited to only 6 months per year owing to an absence of sunlight during the austral winters. In an effort to establish the role that bacteria and their associated viruses play in carbon and nutrient cycling in these lakes, indigenous bacteria, free bacteriophage, and lysogen abundances were determined. Total bacterial abundances (TDC) ranged from 3.80 x 10(4) to 2.58 x 10(7) cells mL(-1) and virus-like particle (VLP) abundances ranged from 2.26 x 10(5) to 5.56 x 10(7) VLP mL(-1). VLP abundances were significantly correlated (P < 0.05) with TDC, bacterial productivity (TdR), chlorophyll a (Chl a), and soluble reactive phosphorus (SRP). Lysogenic bacteria, determined by induction with mitomycin C, made up between 2.0% and 62.5% of the total population of bacteria when using significant decreases and increases in TDC and VLP abundances, respectively, and 89.5% when using increases in VLP abundances as the sole criterion for a successful induction event. The contribution of viruses released from induced lysogens contributed <0.015% to the total viral production rate. Carbohydrate and protein based organic aggregates were abundant within the water column of the lakes and were heavily colonized by bacteria and VLPs. Alkaline phosphatase activity was detected within the matrix of the aggregates, implying phosphorus deficiency and consortial nutrient exchanges among microorganisms.

The use of multiple indices of physiological activity to access viability in chlorine disinfected Escherichia coli O157:H7.

A suite of fluorescent intracellular stains and probes was used, in conjunction with viable plate counts, to assess the effect of chlorine disinfection on membrane potential (rhodamine 123; Rh123 and bis-(1,3-dibutylbarbituric acid) trimethine oxonol; DiBAC4(3)), membrane integrity (LIVE/DEAD BacLight kit), respiratory activity (5-cyano-2,3-ditolyl tetrazolium chloride; CTC) and substrate responsiveness (direct viable counts; DVC) in the commensal pathogen Escherichia coli O157:H7. After a 5 min exposure to the disinfectant, physiological indices were affected in the following order: viable plate counts > substrate responsiveness > membrane potential > respiratory activity > membrane integrity. In situ assessment of physiological activity by examining multiple targets, as demonstrated in this study, permits a more comprehensive determination of the site and extent of injury in bacterial cells following sublethal disinfection with chlorine. This approach to assessing altered bacterial physiology has application in various fields where detection of stressed bacteria is of interest.

Rapid direct methods for enumeration of specific, active bacteria in water and biofilms.

Conventional methods for detecting indicator and pathogenic bacteria in water may underestimate the actual population due to sublethal environmental injury, inability of the target bacteria to take up nutrients and other physiological factors which reduce bacterial culturability. Rapid and direct methods are needed to more accurately detect and enumerate active bacteria. Such a methodological advance would provide greater sensitivity in assessing the microbiological safety of water and food. The principle goal of this presentation is to describe novel approaches we have formulated for the rapid and simultaneous detection of bacteria plus the determination of their physiological activity in water and other environmental samples. The present version of our method involves the concentration of organisms by membrane filtration or immunomagnetic separation and combines an intracellular fluorochrome (CTC) for assessment of respiratory activity plus fluorescent-labelled antibody detection of specific bacteria. This approach has also been successfully used to demonstrate spatial and temporal heterogeneities of physiological activities in biofilms when coupled with cryosectioning. Candidate physiological stains include those capable of determining respiratory activity, membrane potential, membrane integrity, growth rate and cellular enzymatic activities. Results obtained thus far indicate that immunomagnetic separation can provide a high degree of sensitivity in the recovery of seeded target bacteria (Escherichia coli O157:H7) in water and hamburger. The captured and stained target bacteria are then enumerated by either conventional fluorescence microscopy or ChemScan(R), a new instrument that is very sensitive and rapid. The ChemScan(R) laser scanning instrument (Chemunex, Paris, France) provides the detection of individual fluorescently labelled bacterial cells using three emission channels in less than 5 min. A high degree of correlation has been demonstrated between results obtained with the ChemScan and traditional plate counts of mixed natural bacterial populations in water. The continuing evolution of these methods will be valuable in the rapid and accurate analysis of environmental samples.

Effects of starvation on physiological activity and chlorine disinfection resistance in Escherichia coli O157:H7.

Escherichia coli O157:H7 can persist for days to weeks in microcosms simulating natural conditions. In this study, we used a suite of fluorescent, in situ stains and probes to assess the influence of starvation on physiological activity based on membrane potential (rhodamine 123 assay), membrane integrity (LIVE/DEAD BacLight kit), respiratory activity (5-cyano-2,3-di-4-tolyl-tetrazolium chloride assay), intracellular esterase activity (ScanRDI assay), and 16S rRNA content. Growth-dependent assays were also used to assess substrate responsiveness (direct viable count [DVC] assay), ATP activity (MicroStar assay), and culturability (R2A agar assay). In addition, resistance to chlorine disinfection was assessed. After 14 days of starvation, the DVC values decreased, while the values in all other assays remained relatively constant and equivalent to each other. Chlorine resistance progressively increased through the starvation period. After 29 days of starvation, there was no significant difference in chlorine resistance between control cultures that had not been exposed to the disinfectant and cultures that had been exposed. This study demonstrates that E. coli O157:H7 adapts to starvation conditions by developing a chlorine resistance phenotype.

Rapid direct methods for enumeration of specific, active bacteria in water and biofilms.

Conventional methods for detecting indicator and pathogenic bacteria in water may underestimate the actual population due to sublethal environmental injury, inability of the target bacteria to take up nutrients and other physiological factors which reduce bacterial culturability. Rapid and direct methods are needed to more accurately detect and enumerate active bacteria. Such a methodological advance would provide greater sensitivity in assessing the microbiological safety of water and food. The principle goal of this presentation is to describe novel approaches we have formulated for the rapid and simultaneous detection of bacteria plus the determination of their physiological activity in water and other environmental samples. The present version of our method involves the concentration of organisms by membrane filtration or immunomagnetic separation and combines an intracellular fluorochrome (CTC) for assessment of respiratory activity plus fluorescent-labelled antibody detection of specific bacteria. This approach has also been successfully used to demonstrate spatial and temporal heterogeneities of physiological activities in biofilms when coupled with cryosectioning. Candidate physiological stains include those capable of determining respiratory activity, membrane potential, membrane integrity, growth rate and cellular enzymatic activities. Results obtained thus far indicate that immunomagnetic separation can provide a high degree of sensitivity in the recovery of seeded target bacteria (Escherichia coli O157:H7) in water and hamburger. The captured and stained target bacteria are then enumerated by either conventional fluorescence microscopy or ChemScan(R), a new instrument that is very sensitive and rapid. The ChemScan(R) laser scanning instrument (Chemunex, Paris, France) provides the detection of individual fluorescently labelled bacterial cells using three emission channels in less than 5 min. A high degree of correlation has been demonstrated between results obtained with the ChemScan and traditional plate counts of mixed natural bacterial populations in water. The continuing evolution of these methods will be valuable in the rapid and accurate analysis of environmental samples.