Manipulating liquid plugs in microchannel with controllable air vents.

An air venting element on microchannel, which can be controlled externally and automatically, was demonstrated for manipulating liquid plugs in microfluidic systems. The element's open and closed statuses correspond to the positioning and movement of a liquid plug in the microchannel. Positioning of multiple liquid plugs at an air venting element enabled the merging and mixing of the plugs. Besides these basic functions, other modes of liquid plug manipulations including plug partitioning, multiple plug mixing, and spacing adjustment between liquid plugs, were realized using combination of multiple elements. The structure, operation, and some functions of the element were demonstrated with a microfluidic chip application. The performances of the element including its failure modes, threshold flow rate, and structural optimization were also discussed.

A high-flux isopore micro-fabricated membrane for effective concentration and recovering of waterborne pathogens.

A high-flux metallic micro/nano-filtration membrane has been fabricated and validated for isolation of waterborne pathogens from drinking water. Obtained membrane with smooth surface and perfectly ordered pores was achieved by a high yield and cost effective multilevel lithography and electroplating technique. The micro-fabricated membrane was also strengthened with an integrated back-support, which can withstand a high pressure during filtration. The results of microfiltration tests with model particles revealed the superior performance of the micro-fabricated filter than current commercial filters in sample throughput, recovery ratio, and reusability. This study highlighted the potential application of micro-fabricated filer in rapid filtration and recovery of C. parvum oocysts for downstream analysis.

Real-time PCR array chip with capillary-driven sample loading and reactor sealing for point-of-care applications.

A major challenge for the lab-on-a-chip (LOC) community is to develop point-of-care diagnostic chips that do not use instruments. Such instruments include pumping or liquid handling devices for distribution of patient's nucleic-acid test sample among an array of reactors and microvalves or mechanical parts to seal these reactors. In this paper, we report the development of a primer pair pre-loaded PCR array chip, in which the loading of the PCR mixture into an array of reactors and subsequent sealing of the reactors were realized by a novel capillary-based microfluidics with a manual two-step pipetting operations. The chip is capable of performing simultaneous (parallel) analyses of multiple gene targets and its performance was tested by amplifying twelve different gene targets against cDNA template from human hepatocellular carcinoma using SYBR Green I fluorescent dye. The versatility and reproducibility of the PCR-array chip are demonstrated by real-time PCR amplification of the BNI-1 fragment of SARS cDNA cloned in a plasmid vector. The reactor-to-reactor diffusion of the pre-loaded primer pairs in the chip is investigated to eliminate the possibility of primer cross-contamination. Key technical issues such as PCR mixture loss in gas-permeable PDMS chip layer and bubble generation due to different PDMS-glass bonding methods are investigated.