Impact of Molecular Chlorine Production from Aerosol Iron Photochemistry on Atmospheric Oxidative Capacity in North China.

Elevated levels of atmospheric molecular chlorine (Cl2) have been observed during the daytime in recent field studies in China but could not be explained by the current chlorine chemistry mechanisms in models. Here, we propose a Cl2 formation mechanism initiated by aerosol iron photochemistry to explain daytime Cl2 formation. We implement this mechanism into the GEOS-Chem chemical transport model and investigate its impacts on the atmospheric composition in wintertime North China where high levels of Cl2 as well as aerosol chloride and iron were observed. The new mechanism accounts for more than 90% of surface air Cl2 production in North China and consequently increases the surface air Cl2 abundances by an order of magnitude, improving the model's agreement with observed Cl2. The presence of high Cl2 significantly alters the oxidative capacity of the atmosphere, with a factor of 20-40 increase in the chlorine radical concentration and a 20-40% increase in the hydroxyl radical concentration in regions with high aerosol chloride and iron loadings. This results in an increase in surface air ozone by about 10%. This new Cl2 formation mechanism will improve the model simulation capability for reactive chlorine abundances in the regions with high emissions of chlorine and iron.

Sm3+ as effective deactivator for enhanced ∼3 µm laser emission in Er,Sm:SrLaAlO4 crystal.

A promising mid-infrared (MIR) laser crystal with Er, Sm co-doped SrLaAlO4 (Er,Sm:SLA) crystal was successfully grown using the Czochralski (CZ) method. It was the first time that co-doped Sm3+ ion as deactivator for Er3+ activated âˆ¼ 3.0 µm laser. The crystal structure, absorption spectra, emission spectra, and energy level lifetime were discussed in detail. The band structure and density of states were calculated by the density functional theory. The spectral parameters were calculated using Judd-Ofelt (J-O) theory and the deactivate effect of Sm3+ was systematically studied. The introduction of Sm3+ ions enhance the 2.7 µm mid infrared emission intensity by three times, and decrease the lifetime of 4I13/2 energy level of Er3+ ion from 4.35 ms to 0.98 ms. The lifetime ratio of upper and lower levels for 2.7 µm emission was calculated to be 0.63, which is 2.6 times of Er:SLA crystal and comparable to some commercial crystals. All the results indicate that the Sm3+ ion is an effective deactivator for âˆ¼3 µm laser emission. The long upper level lifetime, as well as the large lifetime ratio, the broadening spectra characteristics and the appropriate emission cross-section show the Er,Sm:SLA crystal a good gain material for ultrafast and tunable lasers at âˆ¼3.0 µm.

Optimizing UAV spray parameters to improve precise control of tobacco pests at different growth stages.

BACKGROUND: Unmanned aerial vehicles (UAVs) for pesticide application show promising potential in tobacco pest management. However, the impact of flight parameters on spray efficacy requires further investigation. Three field experiments were conducted from the rosette to the maturation stage of tobacco to systematically assess spray efficacy under varying flight heights, speeds, and application volumes. Using a multi-index weight analysis method, optimal operational parameter combinations for different tobacco growth stages were evaluated and compared with backpack electric sprayers. RESULTS: For the rosette stage, the recommended parameter is a flight speed of 5 m s-1, a flight height of 2 m, and a liquid application volume of 30 L hm-2; during the vigorous growth stage, the suggested parameter includes a flight speed of 3 m s-1, a flight height of 2 m, and a liquid application volume of 22.5 L hm-2. In the maturing stage, optimal parameter consists of a flight speed of 3 m s-1, a flight height of 3.5 m, and a liquid application volume of 30 L hm-2. Furthermore, UAV spraying achieves higher droplet deposition on both sides of tobacco leaves compared to traditional electric backpack sprayers. CONCLUSIONS: Adjusting UAV spraying parameters for different tobacco growth stages is crucial. These results can provide the methods for the precise control technology of tobacco pests at different growth stages. © 2024 Society of Chemical Industry.

CuCo2O4/CuO Heterostructure with Oxygen Vacancies Induced by Plasma for Electrocatalytic Nitrate Reduction to Ammonia.

Electrochemical nitrate reduction (NO3RR) to ammonia production is regarded as one of the potential alternatives for replacing the Haber-Bosch technology for realizing artificial ammonia synthesis. In this study, a CuCo2O4/CuO-Ar heterostructure in the shape of dandelion nanospheres formed by nanoarrays has been successfully constructed, demonstrating excellent NO3RR performance. Experimental results indicate that Ar plasma etching of CuCo2O4/CuO-Ar significantly increases the content of oxygen vacancies compared to the sample of CuCo2O4/CuO-Air etched by air plasma, resulting in improved NO3RR performance. Density functional theory calculations further confirm that the existence of more oxygen vacancies effectively decreases the energy barrier of nitrate adsorption, which is due to the generation of more oxygen vacancies facilitating nitrate adsorption and weakening the N-O bonds of nitrate after plasma treatment. As a result, CuCo2O4/CuO-Ar exhibits a high NH3 yield of 0.55 mmol h-1 cm-2 and a Faraday efficiency of 95.07% at the optimal potential of -0.9 V (vs RHE) in a neutral medium. Importantly, CuCo2O4/CuO-Ar also showcases excellent electrocatalytic stability. This study presents new views on the design and structure regulation of NO3RR electrocatalysts and their potential applications in the future.

AI-MARRVEL - A Knowledge-Driven AI System for Diagnosing Mendelian Disorders.

BACKGROUND: Diagnosing genetic disorders requires extensive manual curation and interpretation of candidate variants, a labor-intensive task even for trained geneticists. Although artificial intelligence (AI) shows promise in aiding these diagnoses, existing AI tools have only achieved moderate success for primary diagnosis. METHODS: AI-MARRVEL (AIM) uses a random-forest machine-learning classifier trained on over 3.5 million variants from thousands of diagnosed cases. AIM additionally incorporates expert-engineered features into training to recapitulate the intricate decision-making processes in molecular diagnosis. The online version of AIM is available at https://ai.marrvel.org. To evaluate AIM, we benchmarked it with diagnosed patients from three independent cohorts. RESULTS: AIM improved the rate of accurate genetic diagnosis, doubling the number of solved cases as compared with benchmarked methods, across three distinct real-world cohorts. To better identify diagnosable cases from the unsolved pools accumulated over time, we designed a confidence metric on which AIM achieved a precision rate of 98% and identified 57% of diagnosable cases out of a collection of 871 cases. Furthermore, AIM's performance improved after being fine-tuned for targeted settings including recessive disorders and trio analysis. Finally, AIM demonstrated potential for novel disease gene discovery by correctly predicting two newly reported disease genes from the Undiagnosed Diseases Network. CONCLUSIONS: AIM achieved superior accuracy compared with existing methods for genetic diagnosis. We anticipate that this tool may aid in primary diagnosis, reanalysis of unsolved cases, and the discovery of novel disease genes. (Funded by the NIH Common Fund and others.).

Integrated analysis of single-cell RNA sequencing and bulk RNA data reveals gene regulatory networks and targets in dilated cardiomyopathy.

Dilated cardiomyopathy (DCM) is a common cause of heart failure, thromboembolism, arrhythmias, and sudden cardiac death. The quality of life and long-term survival rates of patients with dilated DCM have greatly improved in recent decades. Nevertheless, the clinical prognosis for DCM patients remains unfavorable. The primary driving factors underlying the pathogenesis of DCM remain incompletely understood. The present study aimed to identify driving factors underlying the pathogenesis of DCM from the perspective of gene regulatory networks. Single-cell RNA sequencing data and bulk RNA data were obtained from the Gene Expression Omnibus (GEO) database. Differential gene analysis, single-cell genomics analysis, and functional enrichment analysis were conducted using R software. The construction of Gene Regulatory Networks was performed using Python. We used the pySCENIC method to analyze the single-cell data and identified 401 regulons. Through variance decomposition, we selected 19 regulons that showed significant responsiveness to DCM. Next, we employed the ssGSEA method to assess regulons in two bulk RNA datasets. Significant statistical differences were observed in 9 and 13 regulons in each dataset. By intersecting these differentiated regulons and identifying shared targets that appeared at least twice, we successfully pinpointed three differentially expressed targets across both datasets. In this study, we assessed and identified 19 gene regulatory networks that were responsive to the disease. Furthermore, we validated these networks using two bulk RNA datasets of DCM. The elucidation of dysregulated regulons and targets (CDKN1A, SAT1, ZFP36) enhances the molecular understanding of DCM, aiding in the development of tailored therapies for patients.

Neuroendoscopy-Assisted Entire-Process Visualization Technique of Ventricular Puncture for External Ventricular Drainage.

OBJECTIVE: This study aimed to investigate the feasibility, safety, and efficacy of the neuroendoscopy-assisted entire-process visualization technique (NEAEVT) of ventricular puncture for external ventricular drainage. METHODS: Eighty-eight patients with cerebral hemorrhage who underwent unilateral ventricular puncture for external ventricular drainage in our hospital from June 2021 to June 2023 were analyzed. Patients were grouped according to puncture technique: NEAEVT (30 patients), freehand (30 patients), and laser-navigation-assisted (28 patients). Operation time, drainage tube placement, and catheter-related hemorrhage incidence were compared between the groups. RESULTS: Mean operation time significantly differed between the freehand, NEAEVT, and laser-assisted groups (17.07, 18.37, and 34.04 min, respectively; P <0.0001). The position of the drainage tube was optimal or adequate in all patients of the NEAEVT group; optimal/adequate positioning was achieved in 80% of the freehand group. No catheter-related hemorrhage occurred in the NEAEVT group. Three freehand group patients and 2 laser-assisted group patients experienced catheter-related hemorrhage. CONCLUSION: The NEAEVT of ventricular puncture is accurate and achieves ventricular drainage without significantly increasing surgical trauma, operation time, or incidence of hemorrhage.

Characteristics of methane and carbon dioxide in ice caves at a high-mountain glacier of China.

The exploration of the spatiotemporal distribution of greenhouse gas (GHG) exchange in the cryosphere (including ice sheet, glaciers, and permafrost) is important for understanding its future feedback to the atmosphere. Mountain glaciers and ice sheets may be potential sources of GHG emissions, but the magnitude and distribution of GHG emissions from glaciers and ice sheets remain unclear because observation data are lacking. In this study, in situ CH4 and CO2 and the mixing ratios of their carbon isotope signatures in the air inside an ice cave were measured, and CH4 and CO2 exchange in the meltwater of Laohugou glacier No. 12, a high-mountain glacier in an arid region of western China, was also analyzed and compared with the exchange in downstream rivers and a reservoir. The results indicated elevated CH4 mixing ratios (up to 5.7 ppm) and depleted CO2 (down to 168 ppm) in the ice cave, compared to ambient levels during field observations. The CH4 and CO2 fluxes in surface meltwater of the glacier were extremely low compared with their fluxes in rivers from the Tibetan Plateau (TP). CH4 and CO2 mixing ratios in the air inside the ice cave were mainly controlled by local meteorological conditions (air temperature, wind speed and direction) and meltwater runoff. The carbon isotopic compositions of CH4 and CO2 in the ice cave and terminus meltwater indicated δ13C-CH4 depletion compared to ambient air, suggesting an acetate fermentation pathway. The abundances of key genes for methanogenic archaea/genes encoding methyl coenzyme M reductase further indicated the production of CH4 by methanogenic archaea from the subglacial meltwater of high-mountain glaciers. The discovery of CH4 emissions from even small high-mountain glaciers indicates a more prevalent characteristic of glaciers to produce and release CH4 from the subglacial environment than previously believed. Nevertheless, further research is required to understand the relationship between this phenomenon and glacial dynamics in the third pole.

Energy level regulation of anions via hydrogen bond effects to construct a stable solid electrolyte interface for a high-stability lithium metal anode.

An intermolecular hydrogen bond between 2,5-dihydroxyterephthalic acid and the anions in the Li+ solvation shell is constructed to promote the formation of a LiF-rich SEI on a metallic Li electrode. Li metal batteries with improved cyclability (140 cycles under an N/P ratio of 4.9) and high capacity retention (90%) are eventually obtained.

The BLV-miRNAs pathway of BLV inhibits the expression of Lactoferrin, Lactoperoxidase, Alpha-lactalbumin and Beta-lactoglobulin proteins.

Bovine leukemia virus (BLV) is a widespread virus that decreases milk production and quality in dairy cows. As crucial components of BLV, BLV-encoded microRNAs (BLV-miRNAs) affect BLV replication and may impact the synthesis of Lactoferrin (LTF), Lactoperoxidase (LPO), Alpha-lactalbumin (alpha-LA), and Beta-lactoglobulin (beta-LG). In this study, we investigated the targeting relationship between BLV-miRNAs and LTF, LPO, alpha-LA, and beta-LG in cow's milk. Additionally, we investigated the possible mechanisms by which BLV reduces milk quality. The results showed that cow's milk had significantly lower levels of LTF, LPO, and alpha-LA proteins in BLV-positive cows than in BLV-negative cows. BLV-△miRNAs (miRNA-deleted BLV) enhanced the reduction of LPO, alpha-LA, and beta-LG protein levels caused by BLV infection. Multiple BLV-miRNAs have binding sites with LTF and LPO mRNA; however, only BLV-miR-B1-5 P has a targeting relationship with LPO mRNA. The results revealed that BLV-miR-B1-5 P inhibits LPO protein expression by targeting LPO mRNA. However, BLV does not directly regulate the expression of LTF, alpha-LA, or beta-LG proteins through BLV-miRNAs.

WIP1-mediated regulation of p38 MAPK signaling attenuates pyroptosis in sepsis-associated acute kidney injury.

Wild-Type p53-Induced Phosphatase 1 (WIP1/PPM1D) is a serine/threonine phosphatase that plays a significant role in various physiological processes. However, the involvement of WIP1 in kidney remains unclear. Lipopolysaccharide (LPS) was administered to induce acute injury in mice and human kidney 2 (HK2) cells in the study. The WIP1 inhibitor, CCT007093, was administered both in vitro and in vivo to assess its effect on kidney. The single-cell sequencing (scRNA-seq) data revealed that Ppm1d mRNA reached peak on day 2 following unilateral ischemia-reperfusion injury (uni-IRI) in mice, especially in the proximal renal tubules during repair phase. Compared to the control group, WIP1 protein exhibited a significant increase in renal tubules of patients with acute tubular injury (ATI) and mice with LPS-induced acute kidney injury (AKI), as well as in LPS-injured HK2 cells. In vitro experiments showed that CCT007093 increased the protein levels of NLRP3, cleaved-Caspase1, GSDMD-N and IL-1ß in HK2 cells and further reduced the viability of LPS-stimulated HK2 cells. In vivo experiments showed that inhibition of WIP1 activity with CCT007093 further increased cleaved-Caspase1, GSDMD-N protein levels in kidney tissue from mice with LPS-induced AKI. In addition, LPS induces phosphorylation of p38 MAPK, a key regulator of pyroptosis, which is further activated by CCT007093. In conclusion, inhibition of WIP1 activity acts as a positive regulator of renal tubular pyroptosis mainly through the mediation of phospho-p38 MAPK.

Association of vulnerable plaques with white matter hyperintensities on high-resolution magnetic resonance imaging.

Background: One of the widespread manifestations of cerebral small vessel disease (CSVD) of the brain parenchyma is white matter lesion, which appears as white matter hyperintensities (WMHs) on magnetic resonance imaging (MRI). Previous studies have illustrated that large artery atherosclerosis is related to CSVD, but the precise progress of pathogenesis remains unknown. High-resolution MRI (HR-MRI) has the ability to delineate intracranial vascular walls, enabling a thorough exploration of the structure and composition of unstable plaques. This study aimed to apply HR-MRI to characterize the wall changes and plaque characteristics of middle cerebral arteries in patients with WMHs and to investigate the correlation between plaque vulnerability parameters and different degrees of WMHs. Methods: In this study, 138 patients with acute ischemic stroke at Harbin Medical University's First Clinical Hospital (May 2021 to October 2023) were cross-sectionally reviewed and underwent conventional brain and HR-MRI using T1-weighted 3D volumetric isotropic turbo spin echo acquisition (T1W-3D-VISTA) of the unilateral middle cerebral artery (MCA). According to Fazekas grade (0-6), the patients were divided into two groups: Fazekas score 0-2, no-or-mild WMHs; and Fazekas 3-6, moderate-to-severe WMHs. The intraplaque hemorrhage, plaque distribution, plaque enhancement, plaque load, remodeling pattern, and stenosis of the two groups were measured. Binary logistic regression analysis was conducted to evaluate the relationship between vulnerable plaques and WMHs. Results: Of the participants who were initially considered for inclusion, 71 were deemed eligible, among whom 34 were placed in the no-or-mild WMH group and 37 in the moderate-to-severe WMH group. Between the two groups, there were significant differences in intraplaque hemorrhage (P=0.01), a wide distribution (P=0.02), and plaque enhancement (P=0.02). Univariate analysis showed that WMHs were associated with age [odds ratio (OR) =1.080; 95% confidence interval (CI): 1.020-1.144; P=0.008], hypertension (OR =3.500; 95% CI: 1.276-9.597; P=0.01), intraplaque hemorrhage (OR =3.955; 95% CI: 1.247-12.538; P=0.02), a wide distribution (OR =3.067; 95% CI: 1.159-8.115; P=0.02), and significant plaque enhancement (OR =4.372; 95% CI: 1.101-17.358; P=0.03); however, the multivariate results showed that the only independent factors associated with WMHs were age (OR =1.095; 95% CI: 1.019-1.176; P=0.01) and intraplaque hemorrhage (OR =5.88; 95% CI: 1.466-23.592; P=0.01). Conclusions: Our findings suggest that age and intraplaque hemorrhage may be associated with more severe WMHs in patients with acute ischemic stroke, which may be helpful for further clinical examination and intervention treatment.

Left atrial and left ventricular strain in feature-tracking cardiac magnetic resonance for predicting patients at high risk of sudden cardiac death in hypertrophic cardiomyopathy.

Background: Sudden cardiac death (SCD) represents the most severe complication of hypertrophic cardiomyopathy (HCM). The risk stratification of SCD in patients with HCM remains a subject of ongoing debate, and the utility of left atrial (LA) and left ventricular (LV) myocardial strain for risk stratification of also SCD remains uncertain. Through use of feature-tracking cardiac magnetic resonance (FT-CMR), this study aimed to investigate the attenuation of LA and LV strain in HCM and to assess their predictive value in SCD. Methods: This retrospective and cross-sectional study included patients with HCM who underwent 3.0 T cardiac magnetic resonance (CMR) at a single institution. Feature-tracking strain analysis was conducted to obtain the strain rate (SR) and LV strain and to evaluate LV function. LA strain was measured during different functional phases including left atrial reservoir strain (LARS), LA conduit strain (LACS), and LA booster strain. All patients were categorized into high- and low-risk groups for SCD as defined by the 2020 American Heart Association/American College HCM implantable cardioverter defibrillator class of recommendation algorithm. Comparison between the two groups was conducted using the independent samples t test and the nonparametric rank sum test. Multivariate logistic regression analysis was performed to further identify the factors influencing SCD risk in HCM. Results: Compared with those in the low-risk group, patients in the high-risk group had lower left ventricular ejection fraction (LVEF), LV stroke volume index (LVSVI), and LA stroke volume index (LASVI) but a higher LV end-systolic volume index (LVESVI), LV maximum wall thickness, and late gadolinium enhancement (LGE) (P<0.001). LV strain, SR, and LA strain all showed significant differences between the high- and low-risk groups (LARS: P=0.04; LACS: P=0.02; all other P values <0.001). The LV global circumferential strain (LVGCS) had a strong negative correlation with LVEF in patients with HCM (r=-0.76; P<0.001). Multivariate analysis showed that LV global radial strain (LVGRS) and LARS could be used for categorizing the patients into the high-risk group [LVGRS: odds ratio (OR) =0.69; 95% confidence interval (CI): 0.55-0.87, P<0.001; LARS: OR =1.39; 95% CI: 1.02-1.90, P=0.03]. The combined LVGRS-LARS model exhibited a superior diagnostic value for high risk of SCD [area under the curve (AUC) =0.95; 95% CI: 0.90-1.00; P<0.001] compared to LARS alone (AUC =0.63; 95% CI: 0.51-0.76; P=0.04). Conclusions: LA and LV strain measured by FT-CMR can accurately identify those patients with HCM at a high risk of SCD. This approach may prove considerably value in guiding early therapeutic intervention with implantable cardioverter-defibrillators (ICDs) to prevent adverse clinical outcomes.

RFG-TVIU: robust factor graph for tightly coupled vision/IMU/UWB integration.

High precision navigation and positioning technology, as a fundamental function, is gradually occupying an indispensable position in the various fields. However, a single sensor cannot meet the navigation requirements in different scenarios. This paper proposes a "plug and play" Vision/IMU/UWB multi-sensor tightly-coupled system based on factor graph. The difference from traditional UWB-based tightly-coupled models is that the Vision/IMU/UWB tightly-coupled model in this study uses UWB base station coordinates as parameters for real-time estimation without pre-calibrating UWB base stations. Aiming at the dynamic change of sensor availability in multi-sensor integrated navigation system and the serious problem of traditional factor graph in the weight distribution of observation information, this study proposes an adaptive robust factor graph model. Based on redundant measurement information, we propose a novel adaptive estimation model for UWB ranging covariance, which does not rely on prior information of the system and can adaptively estimate real-time covariance changes of UWB ranging. The algorithm proposed in this study was extensively tested in real-world scenarios, and the results show that the proposed system is superior to the most advanced combination method in all cases. Compared with the visual-inertial odometer based on the factor graph (FG-VIO), the RMSE is improved by 62.83 and 64.26% in scene 1 and 82.15, 70.32, and 75.29% in scene 2 (non-line-of-sight environment).

Recent advances in enzyme-free and enzyme-mediated single-nucleotide variation assay in vitro.

Single-nucleotide variants (SNVs) are the most common type variation of sequence alterations at a specific location in the genome, thus involving significant clinical and biological information. The assay of SNVs has engaged great awareness, because many genome-wide association studies demonstrated that SNVs are highly associated with serious human diseases. Moreover, the investigation of SNV expression levels in single cells are capable of visualizing genetic information and revealing the complexity and heterogeneity of single-nucleotide mutation-related diseases. Thus, developing SNV assay approaches in vitro, particularly in single cells, is becoming increasingly in demand. In this review, we summarized recent progress in the enzyme-free and enzyme-mediated strategies enabling SNV assay transition from sensing interface to the test tube and single cells, which will potentially delve deeper into the knowledge of SNV functions and disease associations, as well as discovering new pathways to diagnose and treat diseases based on individual genetic profiles. The leap of SNV assay achievements will motivate observation and measurement genetic variations in single cells, even within living organisms, delve into the knowledge of SNV functions and disease associations, as well as open up entirely new avenues in the diagnosis and treatment of diseases based on individual genetic profiles.

Study on Mudcake disintegration in clayey strata during shield tunneling: Effects of dispersants and bentonite slurry.

While tunnel boring machines (TBMs) tunneling in clayey strata, the adhered excavated soil on the cutterhead and cutting tools tends to form mudcake after compaction and consolidation. Mudcake can obstruct the cutterhead openings and rendering the cutting tools ineffective, leads to a substantial reduction in advance rate. Dispersants are recognized as an effective method for the disintegration of mudcakes. A novel set of equipment, comprising a mudcake compression device and a mudcake disintegration apparatus, is developed for assessing mudcake disintegration properties. The results showed that mudcakes underwent a tripartite disintegration process in water, including an initial stage, a rapid disintegration stage, and a stable stage. In the initial stage, the mudcakes absorbed water before disintegration, resulting in marginal changes in the weight of the disintegrated mudcakes. In the rapid disintegration stage, the weight of the disintegrated mudcakes increased quickly. During the stable stage, the weight of the disintegrated mudcakes remained relatively constant. The submersion of mudcakes in a dispersant solution substantially increased the rate of disintegration. Greater dispersant concentration corresponded to an increase in the disintegration rate. No weight gain was observed in mudcakes during the initial disintegration stage. When mudcakes disintegrated in a bentonite slurry, the weight of the disintegrated mudcakes initially decreased and then stabilized. The weight of the disintegrated mudcakes turned negative, indicating an increase in the weight of mudcakes. This suggested that bentonite significantly hindered mudcake disintegration.

Preparation and sustained-release of chitosan-alginate bilayer microcapsules containing aromatic compounds with different functional groups.

This study investigated the release of aromatic compounds with distinct functional groups within bilayer microcapsules. Bilayer microcapsules of four distinctive core materials (benzyl alcohol, eugenol, cinnamaldehyde, and benzoic acid) were synthesized via freeze-drying. Chitosan (CS) and sodium alginate (ALG) were used as wall materials. CS concentration, using orthogonal experiments with the loading ratio as a metric. Under optimal conditions, three other types of microcapsules (cinnamic aldehyde, benzoic acid, and benzyl alcohol) were obtained. The four types of microcapsules were characterized using Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscope (TEM), and thermogravimetric analysis (TGA), and their sustained release characteristics were evaluated. The optimal conditions were: CS dosage, 1.2 %; CS-to-eugenol mass ratio, 1:2; and CS-to-ALG mass ratio, 1:1. By comparing the IR spectra of the four types of microcapsules, wall material, and core material, the core materials were revealed to be encapsulated within the wall material. SEM results revealed that the granular protuberances on the surface of the microcapsules were closely aligned and persistent when magnified 2000×. The TEM results indicated that all four microcapsules had a spherical and bilayer structure. The thermal stability and sustained release results showed that the four microcapsules were more resilient and less volatile than the four core materials. The release conformed to first-order kinetics, and the release ratios of the four microcapsules were as follows: benzyl alcohol microcapsules Ëƒ eugenol microcapsules Ëƒ cinnamaldehyde microcapsules Ëƒ benzoic acid microcapsules. The prepared bilayer microcapsules encapsulated four different core materials with good sustained release properties.

Functional role of TrIL-1ß in Takifugu rubripes defense against Cryptocaryon irritans infection.

The Japanese puffer, Takifugu rubripes, is a commercially important fish species in China that is under serious threat from white spot disease (cyptocaryoniasis), which leads to heavy economic losses. We previously found that interleukin-1ß (IL-1ß), an important cytokine with a potential role in resistance against pathogens, was one of the most significantly differentially up-regulated proteins in the gills and spleen of T. rubripes infected by the protozoan parasite Cryptocaryon irritans. In this study, we assessed the potential function of T. rubripes IL-1ß (TrIL-1ß) in fish infected with C. irritans. Phylogenetic analysis indicated that the TrIL-1ß protein sequence was most closely related to that of Atlantic salmon (Salmo salar) (67.2 %). The incubation experiments revealed that TrIL-1ß may reduce trophont activity by destroying membranes. Immunofluorescence experiments showed that recombinant TrIL-1ß promoted the expression of endogenous IL-1ß, which penetrated and disrupted the cell membranes of trophonts. Transmission electron microscopy showed that the IL-1ß group had less tissue damage compared with control groups of fish. IL-1ß-small interfering RNA and IL-1ß overexpression experiments were performed in head kidney primary cells, and challenge experiments were performed in vitro. Quantitative RT-PCR results showed that TrIL-1ß regulated and activated MyD88/NF-κB and MyD88/MAPK/p38 signaling pathways during C. irritans infection. TrIL-1ß also promoted the differential expression of IgM, showing that it was involved in humoral immunity of T. rubripes. The cumulative mortality experiment show that TrIL-1ß could protect fish against C. irritans infection. These results enrich current knowledge about the molecular structure of TrIL-1ß. They also suggested that recombinant TrIL-1ß could be used as an adjuvant in a subunit vaccine against C. irritans infection, which is of profound importance for the prevention and control of parasitic diseases in T. rubripes.

Molecular Dynamics Simulation of the Interaction within the Carboxymethyl Cellulose-Modified Montmorillonite Lamellae at Aggressive CuCl2 Concentrations.

To elucidate the degradation mechanism of the CMC-modified MMT composite at aggressive Cu2+ concentrations, large scale molecular dynamics simulation was conducted for CuCl2 concentrations ranging from 0 to 800 mM. Both CMC and MMT followed the Langmuir isotherm for Cu2+ adsorption, and the adsorption capacity of CMC (8.75 mmol/g) was much higher than that of MMT (0.83 mmol/g). Despite the CMC mass ratio being only 4.1%, it adsorbed up to 34.3% of the total adsorbed Cu2+. The Cu2+ attraction ability hierarchy of oxygen-containing functional groups in the CMC is as follows: carboxylic oxygens > alcoholic oxygens > carbinolic oxygens > bridging oxygens > glucose oxygens. Carboxyls were the most effective in chelating and complexing with Cu2+, and they could be intentionally added in artificially synthesized polymer-MMT composites for Cu2+ containment. Formation of the Cu2+ cation bridge between CMC and MMT at aggressive CuCl2 concentrations contributed to the transition of CMC density distribution from unimodality to bimodality and enhanced resistance of polymer elution. As the CuCl2 concentration increased, the stoichiometric ratio between the chelated Cu2+ and carboxylic oxygens increased from 1:2 to 1:1, suggesting the evolution of the Cu2+ chelation mechanism.

Textured Perovskite/Silicon Tandem Solar Cells Achieving Over 30% Efficiency Promoted by 4-Fluorobenzylamine Hydroiodide.

Monolithic textured perovskite/silicon tandem solar cells (TSCs) are expected to achieve maximum light capture at the lowest cost, potentially exhibiting the best power conversion efficiency. However, it is challenging to fabricate high-quality perovskite films and preferred crystal orientation on commercially textured silicon substrates with micrometer-size pyramids. Here, we introduced a bulky organic molecule (4-fluorobenzylamine hydroiodide (F-PMAI)) as a perovskite additive. It is found that F-PMAI can retard the crystallization process of perovskite film through hydrogen bond interaction between F- and FA+ and reduce (111) facet surface energy due to enhanced adsorption energy of F-PMAI on the (111) facet. Besides, the bulky molecular is extruded to the bottom and top of perovskite film after crystal growth, which can passivate interface defects through strong interaction between F-PMA+ and undercoordinated Pb2+/I-. As a result, the additive facilitates the formation of large perovskite grains and (111) preferred orientation with a reduced trap-state density, thereby promoting charge carrier transportation, and enhancing device performance and stability. The perovskite/silicon TSCs achieved a champion efficiency of 30.05% based on a silicon thin film tunneling junction. In addition, the devices exhibit excellent long-term thermal and light stability without encapsulation. This work provides an effective strategy for achieving efficient and stable TSCs.