Enhancing strategies of photosynthetic hydrogen production from microalgae: Differences in hydrogen production between prokaryotic and eukaryotic algae.

Hydrogen production through the metabolic bypass of microalgae photosynthesis is an environmentally friendly method. This review examines the genetic differences in hydrogen production between prokaryotic and eukaryotic microalgae. Additionally, the pathways for enhancing microalgae-based photosynthetic hydrogen generation are summarized. The main strategies for enhancing microalgal hydrogen production involve inhibiting the oxygen-generating process of photosynthesis and promoting the oxygen tolerance of hydrogenase. Future research is needed to explore the regulation of physiological metabolism through quorum sensing in microalgae to enhance photosynthetic hydrogen production. Moreover, effective evaluation of carbon emissions and sequestration across the entire photosynthetic hydrogen production process is crucial for determining the sustainability of microalgae-based production approaches through comprehensive lifecycle assessment. This review elucidates the prospects and challenges associated with photosynthetic hydrogen production by microalgae.

Potential role of quorum quenching activity of silver nanoparticles in controlling non-filamentous bulking within activated sludge process.

The effective prevention and control of non-filamentous bulking is a significant challenge. In this study, the underlying effect of quorum sensing (QS) on inducing non-filamentous bulking and the maintenance effect of silver nanoparticles (AgNPs) on sludge floc stability, aggregation and settleability based on the quorum quenching (QQ) activity during non-filamentous bulking were investigated. The results showed that the concentration of N-acyl homoserine lactone (AHL) increased significantly in the activated sludge system at a high organic load rate (OLR), triggering the AHL-mediated QS. Additionally, the triggered QS promoted exopolysaccharide secretion, reducing the surface charge and hydrophobicity of the sludge aggregates, and further deteriorating the settleability of the sludge aggregates. AgNPs, a quorum sensing inhibitor (QSI), inhibited the AHL-QS based on QQ activity under high OLR, which maintained the physicochemical properties of extracellular polymeric substances (EPS). AgNPs-QQ maintained the surface energy barrier and electrostatic barrier of sludge aggregates and the gel properties of exopolysaccharides, which is favorable for microbial aggregation. The appropriate concentrations of AgNPs (≤10 mg/L) had no negative effect on biological nutrient removal in the sequencing batch reactors (SBRs) at the high organic loading. Therefore, AgNPs effectively prevent and control non-filamentous bulking by their QQ activity in the activated sludge process. Thus, the present study provided new insights into controlling non-filamentous bulking during the activated sludge process.

Mechanisms of survival mediated by the stringent response in Pseudomonas aeruginosa under environmental stress in drinking water systems: Nitrogen deficiency and bacterial competition.

Pseudomonas aeruginosa causes public health problems in drinking water systems. This study investigated the potential role of the stringent response in regulating the adaptive physiological metabolic behaviors of P. aeruginosa to low nitrogen stress and bacterial competition in drinking water systems. The results indicated that guanosine tetraphosphate (ppGpp) concentrations in P. aeruginosa increased to 135.5 pmol/g SS under short-term nitrogen deficiency. Meanwhile, the expression levels of the ppGpp synthesis genes (ppx, relA) and degradation gene (spoT) were upregulated by 37.0% and downregulated by 26.8%, respectively, indicating that the stringent response was triggered. The triggered stringent response inhibited the growth of P. aeruginosa and enhanced the metabolic activity of P. aeruginosa to adapt to nutrient deprivation. The interspecific competition significantly affected the regulation of the stringent response in P. aeruginosa. During short-term nitrogen deficiency, the extracellular polymeric substances concentration of P. aeruginosa decreased significantly, leading to desorption and diffusion of attached bacteria and increased ecological risks. The regulatory effect of stringent response on P. aeruginosa gradually weakened under long-term nitrogen deficiency. However, the expression of pathogenic genes (nalD/PA3310) and flagellar assembly genes (fliC) in P. aeruginosa was upregulated by the stringent response, which increased the risk of disease.

New insight into filamentous sludge bulking: Potential role of AHL-mediated quorum sensing in deteriorating sludge floc stability and structure.

The microcosmic mechanisms underlying filamentous bulking remain unclear. The role of extracellular polymeric substances (EPS) governed by quorum sensing (QS) in deteriorating sludge floc stability and structure during filamentous bulking and the feasibility of using quorum quenching (QQ) to maintain sludge floc stability and structure and sludge settling were investigated in this study. The results indicated that the concentration of C6HSL increased from 22.08±3.22 ng/g VSS to 81.42±5.98 ng/g VSS during filamentous bulking. The filamentous bacteria gradually evolved the hdtS gene related to the synthesis of C6HSL with increases in the population density. Triggered QS by filamentous bacteria proliferation induced variation in the composition and structure of EPS within the sludge flocs. The proteins (PN) content of the EPS increased evidently from 40.06 ± 2.41 mg/g VSS to 110.32 ± 4.32 mg/g VSS, and the polysaccharides (PS) content slightly increased during filamentous bulking. The upregulated proteins in the EPS led to a decrease in the relative hydrophobicity of the sludge and an increase in negative surface charge. The α-helix/(ß-sheet+random coil) ratio evidently increased from 0.76 to 0.99 during filamentous bulking, revealing that the proteins were tightly structured, which prevented the exposure of inner hydrophobic groups. The total energy of the interaction (WT) between bacteria increased during sludge bulking, which resulted in the weakening of sludge aggregation. Variation in the physicochemical properties of EPS induced by QS in the filamentous bacteria markedly restrained adhesion between the filamentous bacteria and floc-forming bacteria. The production of PN in the EPS and the expression of the hdtS gene were inhibited by vanillin, which served as a QS inhibitor. The WT between bacteria with 50 mg/L of vanillin basically did not change. Filamentous bulking was significantly inhibited by the addition of vanillin. Therefore, QQ is a potential strategy for the prevention and control of filamentous bulking. This study provides new information regarding the microcosmic mechanisms of filamentous bulking.

[Q-marker prediction of Magnoliae Officinalis Cortex before and after "sweating"].

Magnoliae Officinalis Cortex, a common Chinese medicinal in clinic, should undergo "sweating" process in producing area according to Chinese Pharmacopoeia, which affects its genuineness and quality. In light of the concept and research mode of quality marker(Q-marker) for decoction pieces, the active components of Magnoliae Officinalis Cortex pieces which altered significantly before and after "sweating" were identified in this study. The main pharmacodynamic material basis was clarified by pharmacodynamic, pharmacokinetic and drug property research, followed by the prediction of Q-markers of Magnoliae Officinalis Cortex before and after "sweating", for better improving its quality standard.

Study on the mechanisms of "Xiaoerhuashi Pill, XP" in intervening the health status of high-calorie diet animals.

ETHNOPHARMACOLOGICAL RELEVANCE: "Xiaoerhuashi Pill, XP", with a history of 30 years in China, was included in the first part of the 2015 edition of the Chinese Pharmacopoeia and is widely used in the treatment for pediatric diseases in clinical application. Its main indications include the accumulation of heat caused by food stagnation in children, which has the effect of digestive stagnation and purge heat to relax the bowels. AIM OF THE STUDY: High-calorie diet, closely related to the occurrence and development of multiple diseases, is an unhealthy status of life. However, there is no effective intervention in clinic. Thus, based on animal experiments and bioinformatics, this study aims to explore the potential mechanisms of action of Chinese patent medicine- "Xiaoerhuashi Pill, XP" in the intervention of high-calorie diet. MATERIALS AND METHODS: A high-calorie diet model was prepared by 3-week-old rats. The defecation and intestinal mucosal morphology were observed after intragastric administration of "Xiaoerhuashi Pill, XP". The components of "Xiaoerhuashi Pill, XP" were obtained by chromatography-mass spectrometry, with the corresponding targets obtained by database and target fishing. The key effects substances were obtained by molecular docking, with the obtaining of the ore pathway of "Xiaoerhuashi Pill, XP" in intervention of high-calorie diet based on the enrichment analysis. RESULTS: "Xiaoerhuashi Pill, XP" can actively interfere with defecation and intestinal mucosal structures in high-calorie diet animals. A total of 37 substances were identified in the pediatric digestion solution, and 356 target proteins were mapped, 25 of which were associated with a high-calorie diet. Overall, the analysis shows that the highest degree of integration was quercetin and PON1 protein, with the highest enrichment of insulin resistance pathway. CONCLUSION: "Xiaoerhuashi Pill, XP" can intervene in the health status of high-calorie diet animals. Integration of quercetin and PON1 protein can regulate lipid levels, which may be the key mechanisms of action in "Xiaoerhuashi Pill, XP". The mechanisms, more specifically, may be related to the regulation of pancreas islet function, thus providing a reference for the clinical application of "Xiaoerhuashi Pill, XP", clinical intervention of high-calorie diet and new drug development.

Estimation of oxygen effective diffusion coefficient in a non-steady-state biofilm based on response time.

In wastewater treatment, oxygen effective diffusion coefficient (D eff ) is a key parameter in the study of oxygen diffusion-reaction process and mechanism in biofilms. Almost all the reported methods for estimating the D eff rely on other biokinetic parameters, such as substrate consumption rate and reaction rate constant. Then, the estimation was complex. In this study, a method independent of other biokinetic parameters was proposed for estimating the dissolved oxygen (DO) D eff in biofilms. It was based on the dynamic DO microdistribution in a non-steady-state inactive biofilm, which was measured by the oxygen transfer modeling device (OTMD) combining with an oxygen microelectrode system. A pure DO diffusion model was employed, and the expression of the DO D eff was obtained by applying the analytical solution of the model to a selected critical DO concentration. DO D eff in the biofilm from the bioreactor was calculated as (1.054 ± 0.041) × 10-9 m2/s, and it was in the same order of magnitude with the reported results. Therefore, the method proposed in this study was effective and feasible. Without measurement of any other biokinetic parameters, this method was convenient and will benefit the study of oxygen transport-reaction process in biofilms and other biofouling deposits. Graphical abstract ᅟ.

A Novel Bio-carrier Fabricated Using 3D Printing Technique for Wastewater Treatment.

The structure of bio-carriers is one of the key operational characteristics of a biofilm reactor. The goal of this study is to develop a series of novel fullerene-type bio-carriers using the three-dimensional printing (3DP) technique. 3DP can fabricate bio-carriers with more specialized structures compared with traditional fabrication processes. In this research, three types of fullerene-type bio-carriers were fabricated using the 3DP technique and then compared with bio-carrier K3 (from AnoxKaldnes) in the areas of physicochemical properties and biofilm growth. Images acquired by 3D profiling and SEM indicated that the surface roughness of the 3DP bio-carrier was greater than that of K3. Furthermore, contact angle data indicated that the 3DP bio-carriers were more hydrophilic than K3. The biofilm on the 3DP bio-carriers exhibited higher microbial activity and stronger adhesion ability. These findings were attributed to excellent mass transfer of the substrate (and oxygen) between the vapour-liquid-solid tri-phase system and to the surface characteristics. It is concluded that the novel 3DP fullerene-type bio-carriers are ideal carriers for biofilm adherence and growth.

Composition of EPS fractions from suspended sludge and biofilm and their roles in microbial cell aggregation.

The adhesion and aggregation properties of microbial cell are closely related to extracellular polymeric substances (EPS). In this work, the composition and physicochemical characteristics of EPS in biofilm and suspended sludge (S-sludge) were determined to evaluate their roles in microbial cell aggregation. Raman spectroscopy and three-dimensional fluorescence spectra have been employed to reveal each EPS fraction in different composition. The flocculating capacity of each EPS fraction in the S-sludge shows extraordinary activity, comparing its counterpart in biofilm. Microbial cell surfaces present high hydrophobicity and increased zeta potentials upon EPS extraction. In addition, the respective contribution of EPS to cell aggregating was elucidated. The contribution of combined SEPS and LB-EPS was 23% for S-sludge sample, whereas that was negligible for biofilm sample. The contribution of LB-EPS and TB-EPS were 16% and 30% for S-sludge sample, and -6% and negligible for biofilm sample, respectively. Therefore, EPS promoted the S-sludge cells to aggregate, while in contrast, they showed a negligible or negative effect on the biofilm cells aggregating.

Heterotrophs grown on the soluble microbial products (SMP) released by autotrophs are responsible for the nitrogen loss in nitrifying granular sludge.

In this work, nitrogen loss in the nitrite oxidation step of the nitrification process in an aerobic-granule-based reactor was characterized with both experimental and modeling approaches. Experimental results showed that soluble microbial products (SMP) were released from the nitrite-oxidizing granules and were utilized as a carbon source by the heterotrophs for denitrification. This was verified by the fluorescence in situ hybridization (FISH) analysis. Microelectrode tests showed that oxygen diffusion limitation did result in an anoxic micro-zone in the granules and allowed sequential utilization of nitrate as an electron acceptor for heterotrophic denitrification with SMP as a carbon source. To further elucidate the nitrogen loss mechanisms, a mathematic model was formulated to describe the growth of nitrite oxidizers, the formation and consumption of SMP, the anoxic heterotrophic growth on SMP and nitrate, as well as the oxygen transfer and the substrate diffusion in the granules. The results clearly indicate that the heterotrophs grown on the SMP released by the autotrophs are responsible for the nitrogen loss in the nitrifying granules, and give us a better understanding of the aerobic granules for nitrogen removal. Biotechnol. Bioeng. 2011;108: 2844-2852. © 2011 Wiley Periodicals, Inc.

Measurement of dissolved oxygen and its diffusivity in aerobic granules using a lithographically-fabricated microelectrode array.

A novel gold microelectrode array (MEA) was manufactured with microfabrication techniques and applied on the measurement of dissolved oxygen profile in an aerobic granule. The MEA contained five gold microelectrodes, which had a good linear response to dissolved oxygen and typically had a lifetime of more than 10 days. Dissolved oxygen microprofiles near the surface of an aerobic granule were monitored with this MEA. Based on the measurements, an oxygen effective diffusivity in the upper 100 microm layer of the aerobic granule was estimated to be 1.19 x 10(-9) m2/s. The experimental results demonstrate that the MEA was able to measure the DO levels in aerobic granules accurately and precisely and that the MEA could be used to determine constituents, profiles, and functions in situ in small spaces. Moreover, since the device shape and microelectrode arrangement were all defined by photolithography, the proposed fabrication procedure was flexible and appropriate for fabrication of various types of MEAs.

Modeling a granule-based anaerobic ammonium oxidizing (ANAMMOX) process.

A mathematical model was developed to describe the anaerobic ammonium oxidation (ANAMMOX) process in a granular upflow anaerobic sludge blanket (UASB) reactor. ANAMMOX granules were cultivated in the UASB reactor by seeding aerobic granules. The granule-based reactor had a great N-loading resistant capacity. The model simulation results on the 1-year reactor performance matched the experimental data well. The yield coefficient for the growth and the decay rate coefficient of the ANAMMOX granules were estimated to be 0.164 g COD g(-1) N and 0.00016 h(-1), respectively. With this model, the effects of process parameters on the reactor performance were evaluated. Results showed that the optimum granule diameter for the maximum N-removal should be between 1.0 and 1.3 mm and that the optimum N loading rate should be 0.8 kg N m(-3) d(-1). In addition, the substrate micro-profiles in the ANAMMOX granules were measured with a microelectrode to explore the diffusion dynamics within the granules, and the measured profiles matched the predicted results well.

Cytoreductive surgery plus hyperthermic intraperitoneal chemotherapy improves survival in selected patients with peritoneal carcinomatosis from abdominal and pelvic malignancies: results of 21 cases.

We evaluated the perioperative safety profile and efficacy of cytoreductive surgery (CRS) plus hyperthermic intraperitoneal chemotherapy (HIPEC) in 21 patients with peritoneal carcinomatosis (PC) from gastrointestinal and gynecological cancers. Twenty-one patients with PC (12 gastric cancer, 5 colorectal cancer, 2 ovarian cancer, 1 pseudomyxoma peritonei, 1 malignant mesothelioma) were treated with CRS + HIPEC with hydroxycamptothecin 20 mg and mitomycin C 30 mg in 12,000 mL of normal saline at 43 +/- .5 degrees C for 60 to 90 minutes. Vital signs were recorded for 5 days after surgery. We analyzed the following: local and systemic infections; gastrointestinal function recovery; hematological, hepatic, and renal parameters; wound healing time; adverse events; survival; and quality of life. The PC index was 2 to 33 (median, 11), the duration of operation 4 to 10 h (median, 8 h), and the highest temperature during 5 postoperative days 38.1 degrees C. Two patients developed generalized edema and were successfully treated. Five patients developed hypoproteinemia on day 1 after surgery. All routine blood tests checked at 1 week after surgery were normal. Time of gastric tube removal was 2 to 7 days. Liquid food intake time was 3 to 8 days. Time of removal of stitches was 8 to 18 days. No local or systemic infections, wound disruption, or other clinically important adverse events occurred. The follow-up was 8 to 43 months (median, 22.5 months). Eleven patients died, three survived with tumor, and seven survived free of tumor. CRS + HIPEC was well tolerated in our selected patients with PC, some of whom had improved survival.

Simultaneous determination of nitrate and dissolved oxygen under neutral conditions using a novel silver-deposited gold microelectrode.

In this work a novel gold-based microelectrode was successfully fabricated using photolithographic techniques and electrochemical deposition for a simultaneous determination of nitrate and dissolved oxygen (DO) under neutral conditions. Three-dimensional tree-shaped silver nanorods were formed on the gold surface through electrochemical deposition and they had an electrochemical catalytic reductive activity for both nitrate and oxygen under neutral conditions. Thus, the silver nanorods served as the active center of the microelectrode. The microelectrode could be renewed over five times. Linear sweep voltammetry was employed to quantitatively analyze the nitrate and DO in solution. The microelectrode was used to measure the nitrate and DO microprofiles in a nitrifying aerobic granule from a sequencing batch reactor, which shows that denitrification did not occur in the tested granule. The measurement results demonstrate that the microelectrode was able to simultaneously determine the nitrate and DO levels in the granules under neutral conditions accurately and precisely.

Innovative solid-state microelectrode for nitrite determination in a nitrifying granule.

Nitrite is an intermediate of both nitrification and denitrification in biological removal of nitrogen from wastewater, and in situ measurement of nitrite concentration in a biofilm or microbial granules is highly desirable. However, a solid-state microelectrode for nitrite determination is not available yet In this work, a solid-state microelectrode was manufactured through electrochemical codeposition of Pt--Fe nanoparticles on a gold microelectrode fabricated using photolithography for in situ nitrite determination. This gold-based microelectrode could be used as a more cost-effective, efficient, and reliable alternative to the liquid membrane microelectrode. Nanoparticles with an average diameter of 50 nm were observed on the surface of the chemically modified electrode. A sigmoid peak at ca. 0.7 V (vs Ag/AgCl) was found on the linear sweep voltammogram in nitrite solutions by using the fabricated microelectrode. The peak height of the first-order derivative of the sigmoid peak was proportional to the nitrite concentration of 0.001--0.05 M and could be used for quantitative determination of nitrite. The detection limits (S/N = 3) were approximately 3 x 10(-5) M. The nitrite microprofiles of aerobic granules from a nitrifying reactor were measured with the microelectrode to demonstrate its potential applications with high spatial resolution.

Radiation-induced degradation of methyl orange in aqueous solutions.

Degradation of methyl orange under gamma-irradiation was investigated. The reactions followed pseudo first-order kinetics. Apparent degradation rate constant, estimated through linear regression analysis, increased with an increase of dose rate and a decrease of initial methyl orange concentration. Degradation of methyl orange was significantly accelerated under oxidative condition, but was slightly enhanced under reductive condition. However, the result of decoloration was better under reductive condition than oxidative one. An analysis on the intermediates using Fourier transform infrared and gas chromatography/mass spectrometry demonstrates that the radiolytic degradation of methyl orange was processed with different C-N cleavages under oxidative and reductive conditions.

Microscale analysis of in vitro anaerobic degradation of lignocellulosic wastes by rumen microorganisms.

Anaerobic degradation of lignin in waste straw by ruminal microbes was directly observed using atomic force microscope (AFM). A series of high-resolution AFM images of the straw surface in the biodegradation show that the wax flakelets and lignin granules covering the straw surface were removed by the rumen microorganisms. Such degradation resulted in an exposure of cellulose fibers located inside the straw. The appearance of holes and microfibers in fermentation reveals that tunneling might be one of the ways for rumen microorganisms to attack the straw. Increases in the atomic ratio of oxygen to carbon (O/C) and the ratio C2/C3 in C1s spectra of X-ray photoelectron spectroscopy confirm that more cellulose was exposed on the surface after the anaerobic fermentation of straw. Gas chromatography/mass spectrometry analytical results demonstrate the decomposition of lignin by rumen microorganisms. Fourier transform infrared spectroscopy spectra and the measurement of degradation efficiency of the main straw components further verify these microscaled observations.

An innovative microelectrode fabricated using photolithography for measuring dissolved oxygen distributions in aerobic granules.

In this work an innovative microelectrode was successfully fabricated using photolithography for determination of dissolved oxygen distributions in aerobic granules, which were sampled from a nitrifying sequencing batch reactor. A negative photoresist, SU-8, was used as a substrate for the microelectrode and a 70 microm wide needle was photopatterned on it. The microelectrode could be renewed several times. Cyclic voltammetry analysis and dissolved oxygen measurement demonstrated that the microelectrode was stable and reliable. Dissolved oxygen distribution in a nitrifying granule was successfully monitored with the microelectrode. The profiles indicated that the main active part of the nitrifying granule was the upper 150 microm layer. Using the procedures developed in this work, microelectrodes of the desired shape could be constructed with precise size control at micrometers-scale.

A simple and rapid method for measuring dissolved oxygen in waters with gold microelectrode.

Dissolved oxygen (DO) is an essential indicator in chemical, biological and biochemical processes and needs to be rapidly measured in many cases. In this work, a rapid, sensitive and simple electrochemical method, first derivative linear sweep voltammetry (FD-LSV), was established for the determination of DO. The peak height of FD-LSV was found to be influenced by scan rate and microelectrode surface area. An empirical formula was proposed to describe the relationship between the FD-LSV peak height and the influencing factors. Compared with other electrochemical methods for DO determination, the FD-LSV method needed lesser time and was more accurate. This method was successfully applied for the determination of the DO levels of various environmental water samples.