In Vitro Evaluation of Chito-Oligosaccharides on Disappearance Rate of Nutrients, Rumen Fermentation Parameters, and Micro-Flora of Beef Cattle.

The study aimed to investigate the effect of dietary chitosan oligosaccharides (COS) meal levels on the nutrient disappearance rate, rumen fermentation, and microflora of beef cattle in vitro. A total of 24 fermentation tanks were randomly divided into four treatments containing 0% COS (CON), 0.02% COS, 0.04% COS, and 0.08% COS for an 8-day experiment period, with each treatment comprising six replicates. The disappear rates of DM, CP, EE, and total gas production were quadratically increased with increasing COS levels. The disappear rates of DM, CP, EE, and ADF were greatest, whereas the total gas production was lowest in the 0.08% COS group. The pH, NH3-N, MCP, the content of propionate, isobutyrate, butyrate, valerate, and the A/P were quadratically increased with increasing COS levels, while the A/P were linearly decreased. The pH, MCP, and the content of propionate, and butyrate were highest, whereas the NH3-N and the content of acetate, isobutyrate, valerate, and the A/P were lowest in the 0.08% COS group. Microbiomics analysis showed that the rumen microbial diversity was not altered between the CON and the 0.08% COS group. However, the relative abundance of Methanosphaera, Ruminococcus, Endomicrobium, and Eubacterium groups was increased, and the relative abundance of pathogenic bacteria Dorea and Escherichia-Shigella showed a decrease in the 0.08% COS group. Overall, the 0.08% COS was the most effective among the three addition levels, resulting in an increase in the disappearance rate of in vitro fermented nutrients and improvements in rumen fermentation indexes and microbial communities. This, in turn, led to the maintenance of rumen health.

A novel multitrophic biofloc technology for duckweed and Megalobrama amblycephala integrated culture: Improving nutrient utilization and animal welfare.

Biofloc technology (BFT) is an eco-friendly aquaculture model that utilizes zero-exchange water. In this study, we investigated the integration of duckweed into BFT in an effort to enhance nitrogen, phosphorus, and carbon utilization and to improve animal welfare for cultivating Megalobrama amblycephala. The experiment spanned 75 days, comparing a group of M. amblycephala supplemented with duckweed (DM) to a control group (CG) with no supplementation, where duckweed consumption relied solely on the feeding behavior of the fish. The concentrations of nitrate, total nitrogen, and phosphorus accumulation were lower in the DM than in the CG from day 45 onwards, with differences of 16.19, 26.90, and 1.45 mg/L, respectively, at the end of the experiment. The DM showed simultaneous increases of 5.77, 11.20, and 5.07 % in the absolute utilization of nitrogen, phosphorus, and carbon, respectively. The abundance of TM7a (10.27 %), linked to nitrate absorption, became the dominant genus in the water of the DM. Additionally, the abundance of Cetobacterium, associated with carbohydrate digestion, was significantly higher in gut of the DM (23.83 %) than in the gut of CG (1.24 %, P < 0.05). Supplementing the diet of M. amblycephala with duckweed improved digestion and antioxidant enzyme activity. Transcriptome data showed that duckweed supplementation resulted in an increase in the expression of genes related to protein digestion and absorption and carbohydrate metabolism in M. amblycephala, and analysis of the significantly enriched pathways further supported improved antioxidant capacity. Based on the above results, we concluded that as M. amblycephala consumes more duckweed, the differences in nitrogen and phosphorus levels between the DM and CG would continue to increase, along with a simultaneous increase in fixed carbon. Thus, this study achieved the goal of recycling BFT resources and improving animal welfare by integrating duckweed.

Performance of feeding black soldier fly (Hermetia illucens) larvae on shrimp carcasses: A green technology for aquaculture waste management and circular economy.

Over 944 thousand tonnes of shrimp carcasses are produced worldwide during the shrimp production cycle, and black soldier fly larvae (BSFL) are a potential solution for this shrimp carcass accumulation. In this study, we evaluated the performance of BSFL feeding on shrimp carcasses. Six combinations of wheat bran and shrimp carcass powder (with replacement increments of 20 %) and one whole shrimp carcasses treatment were tested. The bioconversion rate (27.15 ± 3.66 %; p = 0.001), crude protein (55.34 ± 1.27 %; p < 0.001), and crude lipid (14.37 ± 1.86 %; p = 0.007) values of BSFL reared on whole shrimp carcasses were significantly higher than those of BSFL reared on wheat bran. Increasing the shrimp carcass amount in the feeding media resulted in significant increases in BSFL docosahexaenoic acid (with the highest value occurring for BSFL reared on whole shrimp carcasses; 1.46 ± 0.09 %; p < 0.001). Conversely, BSFL docosahexaenoic acid was not detected for BSFL reared on wheat bran. The detected heavy metal concentrations in BSFL were below the limits of the published international guidelines for animal feed. In the obtained BSFL, Salmonella was not detected, and the mould count was <10 CFU/g. The total bacterial count (Lg transformation) of obtained BSFL ranged from 7.88 to 8.07 CFU/g, and no significant differences among all treatments (p = 0.424). Overall, this study demonstrates that BSFL-based bioconversion presents a resource recovery technology for converting shrimp carcasses into high-value nutritional biomass.

Model-free fast integral terminal sliding-mode control method based on improved fast terminal sliding-mode observer for PMSM with unknown disturbances.

This paper presents a novel model-free fast integral terminal sliding-mode control (MFFITSMC) method based on an improved fast terminal sliding-mode observer (IFTSMO) for permanent magnet synchronous motor (PMSM) drive system, which can effectively eliminate the impact caused by unknown disturbances, such as parameter perturbations and external disturbances. The PMSM mathematical model with unknown disturbances is first established, and the ultra-local model (ULM) of the PMSM speed loop is constructed. Next, the model-free fast integral terminal sliding-mode controller is designed in the speed loop based on the ULM. Then, the IFTSMO is designed to precisely estimate the unknown term of the ULM, and the estimated unknown term is fed back to the MFFITSMC controller to perform compensation for unknown disturbances in real time. Finally, compared with the proportional-integral (PI) control method and the conventional model-free sliding-mode control (MFSMC) method, the results of simulations and experiments demonstrate that the presented MFFITSMC method reduces the dependence on the precise model and achieves the purpose of anti-disturbance control of the PMSM drive system.

Impacts of Nile Tilapia (Oreochromis niloticus) exposed to microplastics in bioflocs system.

Microplastics (MPs) are abundant in aquaculture water, including in bioflocs aquaculture systems. Compared with other aquaculture systems, biofloc technology systems have the richest microbes and are beneficial to cultivated organisms. Therefore, this study provides a comprehensive assessment of the potential effects of MPs on aquaculture organisms in bioflocs systems. Here, Nile Tilapia (Oreochromis niloticus) were exposed to MPs (polystyrene; 32-40 µm diameter) with 0, 80 items/L (30 µg/L), and 800 items/L (300 µg/L) for 28 days in a bioflocs aquaculture system. The results showed that the MPs generally had no apparent effect on water quality, tilapia growth, or digestive enzyme activity. However, MPs accumulated the most in the liver (5.65 ± 0.74 µg/mg) and significantly increased the hepato-somatic index of tilapia and reduced the crude protein and lipid of tilapia muscle (p < 0.05). The levels of the antioxidant enzymes catalase and glutathione S-transferase increased significantly in response to MPs (p < 0.05). In contrast, MPs did not affect the content of glutathione, glutathione peroxidase, oxidized glutathione, and malondialdehyde, or the enzyme activity of Na+/K+-ATPase. Moreover, using an improved integrated biomarker response index, growth performance was found to be less responsive to MPs than to oxidative stress and digestive activity. Exposure to MPs did not significantly influence the microbial communities of the bioflocs and tilapia guts (p < 0.05). These results suggest that MPs barely affected tilapia in the bioflocs system. This study contributes to the evaluation of the ecological risk of MPs in aquaculture systems and a better understanding of the integrated response of cultivated vertebrates to MPs in biofloc technology systems.

A modification of nested PCR method for detection of Enterocytozoon hepatopenaei (EHP) in giant freshwater prawn Macrobrachium rosenbergii.

The microsporidian Enterocytozoon hepatopenaei (EHP) has become a critical threat to the global shrimp aquaculture industry, thus necessitating early detection by screening. Development of a rapid and accurate assay is crucial both for the active surveillance and for the assessment of shrimp with EHP infection. In the present study, a distinct strain of E. hepatopenaei (EHP Mr ) was found in Macrobrachium rosenbergii. The SWP1 gene analysis revealed it was a new genotype that differed with the common strain isolated from the Litopenaeus vannamei (EHP Lv ). A nested SWP-PCR method was modified to fix the bug that the original inner primers could not recognize the EHP Mr strain. The redesigned inner primers successfully amplified a product of 182 bp for both the EHP Mr strain and the EHP Lv strain. The new primers also had good specificity and high sensitivity, which may serve as an alternative for EHP genotyping. This study provided a method for detection of EHP in the biosecurity of Macrobrachium rosenbergii farming, and the developed protocol was proposed for the routine investigation and potential carrier screening, especially for molecular epidemiology.

Effect of Activation Modes on the Property Characterization of Crumb Rubber Powder from Waste Tires and Performance Analysis of Activated Rubber-Modified Asphalt Binder.

The rubber molecular chain in waste vulcanized tire rubber will be crosslinked to form a network structure that would be difficult to degrade in asphalt. Crumb rubber treated by desulfurization activation could form active groups on the surface by interrupting the crosslinking bond to improve the compatibility between crumb rubber powder and asphalt. To explore the influence of activation modes on crumb rubber powder and the corresponding rubber-modified asphalt binder, crumb rubber powder was firstly activated through three commonly used activation methods and asphalt binder samples modified by activated crumb rubber powder were also prepared. The basic properties of activated crumb rubber powder were characterized by infrared spectroscopy, and conventional tests were used to study the conventional physical properties of the asphalt binder. The infrared spectroscopy and elemental analysis showed that the crumb rubber powder was mainly composed of alkanes, alkenes, sulfonic acids, aromatics, and a little silica rubber and antioxidant zinc oxide, which is suitable for asphalt modification. The simple heat activation treatment method is not enough to greatly destroy the cross-linking structure of crumb rubber powder, but the "C=C" bond was destroyed more seriously. Under the action of adjuvants, the polysulfide cross-linking bond could be broken in crumb rubber powder. The heat treatment and chemical treatment could not achieve the purpose of reducing the viscosity and improving the compatibility of rubber asphalt binder through desulfurization activation. The mechanochemical treatment would help to improve the performance of crumb-rubber-powder-modified asphalt binder. The data correlation analysis based on the grey relational degree can provide a reference for the selection of activated crumb rubber powder for different application requirements in the asphalt modification procedure.

Cationic Amphiphilic Dendrons with Anticancer Activity.

Cancer has become the leading cause of human death worldwide, and there is an urgent need to design and develop new oncology drugs. In this study, we report series of cationic amphiphilic dendrons with different hydrophobic alkyl chains (Cn) and different generations (Gx) and demonstrate their use for anticancer applications. The results revealed that lower-generation dendrons (G1) with a longer hydrophobic alkyl chain (C12 and C18) have stronger antitumor activity. Among these dendrons, a lead candidate C12-G1 was identified that demonstrated excellent broad-spectrum antitumor activity in 7 cancer cell lines including highly metastatic tumor cells, while simultaneously, hemolysis was negligible. Mechanistic studies showed that C12-G1 could lead to cytoplasmic leakage and induce cancer cell necrosis through membrane disruption. In addition, C12-G1 showed potent inhibition of tumor growth in a B16-F10 melanoma model. In conclusion, these findings demonstrate that the cationic amphiphilic dendron might be a promising agent for anticancer application.

Effect of Desulfurization Process Variables on the Properties of Crumb Rubber Modified Asphalt.

A large number of waste tires are in urgent need of effective treatment, and breaking waste tires into crumb rubber powder for modifying asphalt has been proved as a good idea to solve waste tires. Crumb rubber modified asphalt not only has good high and low temperature performance, durability, and aging resistance but can also reduce pavement noise and diseases, which has wide application prospects. In this study, crumb rubber powder was desulfurized by mechanochemical method to prepare desulfurized crumb rubber modified asphalt. During the desulfurization process of crumb rubber, the effects of desulfurization process variables including desulfurizer type, desulfurizer content, and desulfurization mixing temperature and time were considered, and then the physical properties of modified asphalt were tested. The test results showed that after mixing crumb rubber powder with desulfurizer, the viscosity of crumb rubber powder modified asphalt can be reduced. Moreover, the storage stability of crumb rubber powder modified asphalt could also be improved by mixing crumb rubber with desulfurizer. Based on the physical properties of crumb rubber powder modified asphalt, the desulfurization process of selected organic disulfide (OD) desulfurizer was optimized as follows: the OD desulfurizer content was 3%, the desulfurization mixing temperature was 160 °C, and the mixing time was 30 min. In addition, Fourier infrared spectroscopy analysis was carried out to explore the modification mechanism of desulfurized crumb rubber powder modified asphalt. There is no fracture and formation of chemical bonds, and the modification of asphalt by crumb rubber powder is mainly physical modification.

Performance of a recirculating aquaculture system using biofloc biofilters with convertible water-treatment efficiencies.

To achieve high water-treatment efficiencies and simplify the setup of recirculating aquaculture systems (RAS), this study examined the use of suspended growth reactors (R1 and R2) based on biofloc technology (BFT) as water-treatment biofilters. Moreover, the conversion of the heterotrophic R1 biofilter to a nitrifying role was investigated. During RAS operation using heterotrophic BFT biofilters, R1 and R2 simultaneously controlled total ammonium nitrogen, nitrite (NO2--N), nitrate (NO3--N), soluble reactive phosphate (SRP), and alkalinity, with relevant functional microbes including denitrifying bacteria (DNB), phosphorus accumulating organisms (PAOs), denitrifying PAOs (DNPAOs), glycogen accumulating organisms, ammonia oxidizing bacteria, and nitrite oxidizing bacteria. To achieve low concentrations of nitrogen, phosphorus, and save carbon sources, we were able to quickly convert R1 into a nitrifying BFT biofilter by stopping carbohydrate addition. Although there were dominant relative abundances of DNB, PAOs, and DNPAOs in the converted R1, the lack of carbon sources resulted in continuous rise of NO3--N in the effluent, stable NO2--N removal efficiency, and absence of SRP removal after 40 h. However, R2 retained the previous NO3--N and SRP removal efficiencies with carbohydrate addition. This indicated that this novel RAS using BFT biofilters achieved simultaneous nitrogen and phosphate removal, and that the convertible water-treatment efficiencies of BFT biofilters could be controlled by carbohydrate addition. This approach could simplify the RAS setup and meet real-time water quality demands.

Enhancement of Anaerobic Digestion to Treat Saline Sludge from Recirculating Aquaculture Systems.

The effectiveness of carbohydrate addition and the use of ultrasonication as a pretreatment for the mesophilic anaerobic digestion of saline aquacultural sludge was assessed. Analyses were conducted using an anaerobic sequencing batch reactor (ASBR), which included stopped gas production attributed to the saline inhibition. After increasing the C : N ratio, gas production was observed, and the total chemical oxygen demand (TCOD) removal efficiency increased from 75% to 80%. The TCOD removal efficiency of the sonication period was approximately 85%, compared to 75% for the untreated waste. Ultrasonication of aquaculture sludge was also found to enhance the gas production rate and the TCOD removal efficiency. The average volatile fatty acid (VFA) to alkalinity ratios ranged from 0.1 to 0.05, confirming the stability of the digesters. Furthermore, soluble chemical oxygen demand (SCOD), VFA, and PO4 (3-) concentrations increased in the effluents. There was a 114% greater gas generation during the ultrasonication period, with an average production of 0.08 g COD/L · day(-1).

[Comporison Sduty of Microstructure by Metallographicalk on the Polarized Light and Texture by XRD of CC 5083 and CC 5182 Aluminium Alloy after Cold Rolling and Recrystallization].

At present the study of relation between microstructure, texture and performance of CC 5083 aluminium alloy after cold tolling and recrystallization processes is still finitude. So that the use of the CC 5083 aluminium alloy be influenced. Be cased into electrical furnace, hot up with unlimited speed followed the furnace hot up to different temperature and annealed 2h respectively, and be cased into salt-beth furnace, hot up quickly to different temperature and annealed 30 min respectively for CC 5083 and CC 5182 aluminum alloy after cold roling with 91.5% reduction. The microstructure be watched use metallographic microscope, the texture be inspected by XRD. The start temperature of recrystallization and grain grow up temperature within annealing in the electric furnace of CC 5083 aluminum alloy board is 343 degrees C, and the shap of grain after grow up with long strip (the innovation point ); The start temperature of recrystallization within annealling in the salt bath furnace of CC 5083 is 343 degrees C. The start temperature and end temperature of recrystallization within annealling of CC 5083 and CC 5182 aluminum alloy is 371 degrees C. The grain grow up outstanding of cold rooled CC 5152 aluminum alloy after annealed with 454 degrees C in the electric furnace and salt bath furnace. The start temperature of grain grow up of CC 5083 alluminurn alloy annealed in the electric furnace and salt bath furnace respectively is higher than the start temperature of grain grow up of CC 5182 alluminum alloy annealed in the electric furnace and salt bath furnace respectively. The strat temperature of recrystallization grain grow up is higher than which annealled with other three manner annealing process. The recrystallization temperature of CC 5182 annealed in the salt bath furnace is higher than which annealed in the electric furnace. The recrystallization temperature of the surface layer of CC 5083 and CC 5182 aluminum alloy is higher than the inner layer (the innovation point). There is a difference each other of the structure and the texture of the four manner annealing aluminum alloy (the innovation point). There is a little difference at the recrystallization processes course reflectived by the observe results of structure transform and by the examination results of texture transmission.

[Comparison of texture distribution of cold rolled DC and CC AA 5052 aluminum alloy at different positions through thickness direction by XRD].

To provide gist of DC AA 5052 and CC AA 5052 aluminum alloy to industry production and application, the texture variation of cold rolled sheets through thickness direction was studied by X-ray diffraction method, and the difference in texture at surface, quarter and center layer was analyzed. The hot plates of direct chill cast (DC) AA 5052 and continuous cast (CC) AA 5052 aluminum alloy were annealed at 454 degrees C for 4 hours and then cold rolled to different reductions. The strength and volume fraction of the fiber in CC AA 5052 aluminum alloy is larger than in DC AA 5052 aluminum alloy after same rolling reduction The volume fraction of the recrystallization texture cube in the CC AA 5052 aluminum alloy is less than in the DC AA 5052 aluminum alloy, which result in that CC AA 5052 aluminum alloy needs less cold rolling reduction than DC AA 5052 aluminum alloy for generating the texture with same intensity and volume fraction at surface layer, quarter layer and center layer. The manufacturability and performance of CC AA 5052 aluminum alloy is superior to DC AA 5052 aluminum alloy for use in stamping.

[Texture variation of CC 5052 aluminum alloy slab from surface to center layer by XRD].

For improvement of the processing and gaining uniformity texture structure and performance of direct chill cast CCAA 5052 aluminum alloy band after first hot rolling with different reduction, the material was annealed at 454 degrees C and then cold rolling with different reduction was conducted, the texture at surface, quarter and center layer of the sample was tested and examined by X-ray diffraction method, the data calculated using special software and the difference of texture at surface, quarter and center layer was analyzed. There existed an elevated gradient of intensity from surface layer to center layer after cold rolled with less than or equal to 40% reduction, The main texture of beta is stronger mainly due to transformation from remainder exposure, while the goss and remainder is infirm, the state of texture at each layer is close to each other after cold rolling with reduction high than 56.1%.

[Texture variation of DCAA 5052 aluminum alloy slab at difference position through thickness by XRD].

For improvement the processing and gaining uniformity texture structure and performance the thickness direction of direct chill cast DCAA 5052 aluminum alloy band after first hot rolling with different reduction, the material was annealed at 454 degrees C and then cold rolling with different reduction, we test and examined the texture at surface, quarter and center layer of the sample by use X-ray diffraction method, we calculated the data by use special software and analyses the difference texture at surface, quarter and center layer. The intension gradient of beta texture was along the direction from surface to center layer gradually enhance at different reduction sample. For beta texture, the intension gradient was along the direction from surface to center layer gradually reduce, the volume fraction gradually augment and the intensity gradually were almost equal with the cold rolling reduction increased from 0% to 90%.

[Study on biological characteristics and relative yield of Ophiopogon japonicus].

OBJECTIVE: To study the biological characteristics and the relative yield of Ophiopgon japonicus. METHOD: The observation of the selected plants nad determination of the selected samples. RESULT: The yield of O. japonicus was positively correlated to the height of plant, the weight of leaves, the length of nutritive roots, and the quantity of root tubers. It was also positively correlated to the weight of nutritive roots, but not significantly. CONCLUSION: According to the growing characteristics of O. japonicus, the yield of O. japonicus can be promoted by selecting porous soil, controlling the field water from planting to the middle 10 days of June and enhancing the management of fertilizer and water from July to November and from the end of February to early in March next year.