Distribution of active ingredients and quality control of Forsythia suspensa with AP-MALDI mass spectrometry imaging.

The fruits of Forsythia suspensa (F. suspensa) have been used as a traditional Chinese medicine for 2000 years. Currently, the quality control of F. suspensa strictly follows the instructions of Chinese Pharmacopeia, which mainly controls the content of forsythoside A, phillyrin, and volatile oil. In this study, air pressure MALDI mass spectrometry imaging (AP-MALDI MSI) was used to evaluate the quality of F. suspensa fruits and the distribution of dozens of active ingredients. The variation of active ingredients was measured for more than 30 batches of samples, regarding harvest time, cultivated environment, shelf-life, and habitat. Fifty-three active ingredients could be detected in F. suspensa fruits with AP-MALDI MSI. Seven active ingredients were upregulated, four ingredients downregulated, and 15 ingredients did not change in ripe fruits. A sharp variation of active ingredients in late September was observed for the Caochuan fruits harvested in 2019, which is closely related to the appearance of the ginger color of the pericarp under the microscope observation. The microscope observation is a reliable way to classify ripe and green fruits instead of outlook. Just considering forsythoside A and phillyrin, it is found that wild fruits are better than cultivated fruits, but cultivated fruits have high contents of other ingredients. The shelf-life of F. suspensa fruits is proposed to be 3 years, considering the 26 ingredients investigated. It was found that Luoning wild fruits are better than those from Caochuan with a new evaluation method. Mass spectrometry imaging is an easy, objective, and effective method to evaluate the quality of F. suspensa fruits.

Maximizing pollutant removal and greenhouse gas emission reduction in vertical flow constructed wetlands: an orthogonal experimental approach.

Owing to the impact of the effluent C/N from the secondary structures of urban domestic wastewater treatment plants, the denitrification efficiency in constructed wetlands (CWs) is not satisfactory, limiting their widespread application in the deep treatment of urban domestic wastewater. To address this issue, we constructed enhanced CWs and conducted orthogonal experiments to investigate the effects of different factors (C/N, fillers, and plants) on the removal of conventional pollutants and the reduction of greenhouse gas (GHG) emission. The experimental results indicated that a C/N of 8, manganese sand, and calamus achieved the best denitrification efficiencies with removal efficiencies of 85.7%, 95.9%, and 88.6% for TN, NH4+-N, and COD, respectively. In terms of GHG emission reduction, this combination resulted in the lowest global warming potential (176.8 mg/m2·day), with N2O and CH4 emissions of 0.53 and 1.25 mg/m2·day, respectively. Characterization of the fillers revealed the formation of small spherical clusters of phosphates on the surfaces of manganese sand and pyrite and iron oxide crystals on the surface of pyrite. Additionally, the surface Mn (II) content of the manganese sand increased by 8.8%, and the Fe (III)/Fe (II) and SO42-/S2- on pyrite increased by 2.05 and 0.26, respectively, compared to pre-experiment levels. High-throughput sequencing indicated the presence of abundant autotrophic denitrifying bacteria (Sulfuriferula, Sulfuritalea, and Thiobacillus) in the CWs, which explains denitrification performance of the enhanced CWs. This study aimed to explore the mechanism of efficient denitrification and GHG emission reduction in the enhanced CWs, providing theoretical guidance for the deep treatment of urban domestic wastewater.

Exploration of chemical components and metabolite synthesis pathways in eight Ephedra species based on HS-GC-MS and UPLC-Q-TOF-MS.

Objective: Ephedra, widely used in clinical practice as a medicinal herb, belongs to the genus Ephedra in the family Ephedraceae. However, the presence of numerous Ephedra varieties and variants requires differentiation for accurate identification. Methods: In this study, we employed headspace gas chromatography mass spectrometry (HS-GC-MS), ultra-high performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (UPLC-Q-TOF-MS), and global natural products social molecular networking (GNPS) for chemical component identification. Chemometric analysis was used to analyze the differential components. Metabolic analysis and Kyoto encyclopedia of genes and genomes (KEGG) enrichment were utilized to explore the synthesis pathways of different components. Result: A total of 83 volatile and 79 non-volatile components were identified in Ephedra species. Differential analysis revealed that among the eight Ephedra stems, 18 volatile and 19 non-volatile differential compounds were discovered, whereas Ephedra roots exhibited 21 volatile and 17 non-volatile markers. Volatile compounds were enriched in four synthetic pathways, while non-volatile components were enriched in five pathways among the differentiated components. Conclusion: This study is the first to conduct a comparative analysis of chemical components in different Ephedra species and parts. It provides a foundational reference for authenticating Ephedra herbs, evaluating medicinal resources, and comparing quality in future studies.

The association between parental warmth and children's prosocial behaviour: A moderated mediation analysis.

Prosocial behaviour is a bedrock of humane societies. Although previous studies have shown that parental style is an important contributing factor for children's prosocial behaviour, the psychological mechanism underlying this association in specific cultural background remains unclear. Based on the ecological systems theory, this study sought to explore the influence of parental warmth on children's prosocial behaviour, and the mediating effect of self-efficacy, as well as the moderating role of teachers' incentive evaluation in the link between self-efficacy and children's prosocial behaviour. This cross-sectional, survey-based study collected data from parents and teachers of 414 Chinese preschoolers (5-6 years old). Parents of these children finished questionnaires on the Chinese version of the short-form Egna minnen av. Barndoms uppfostran (s-EMBU-C), Child Behaviour Scale (CBS), and the revised General Self-efficacy Scale (GSES), while Incentive evaluation questionnaire was finished by their teachers. Results indicated that children who experience high parental warmth were more likely to act prosocially (b = 0.61, p < 0.001) and the association between parental warmth and prosocial behaviour was partially mediated by self-efficacy (indirect effect = 0.25, 95 % CI = [0.19, 0.32]). Besides, teachers' incentive evaluation moderated the link between self-efficacy and children's prosocial behaviour (b = 0.24, p < 0.001). Specifically, the effect of self-efficacy on prosocial behaviour was stronger for high teachers' incentive evaluation children than those with low teachers' incentive evaluation. These findings extend the existing understanding of the mechanism concerning the influence of parental warmth on prosocial behaviour in Chinese settings. The results revealed that interventions that could improve children's self-efficacy would be effective in accelerating their prosocial behaviour and schools played a crucial role in working with families to increase their self-efficacy at a young age. It should be noted that this study focused only on Chinese children of 5-6 years old, and the cross-sectional design means that the possibility of bidirectional effects could not be ruled out.

The Influence of Rhenium Content on Helium Desorption Behavior in Tungsten-Rhenium Alloy.

To investigate the influence of different rhenium contents on the helium desorption behavior in tungsten-rhenium alloys, pure tungsten and tungsten-rhenium alloys were irradiated with helium under the same conditions. All irradiated samples were characterized using TDS and DBS techniques. The results indicate that the addition of rhenium can reduce the total helium desorption quantity in tungsten-rhenium alloys and slightly accelerate the reduction in the concentration of vacancy-type defects accompanying helium dissociation. The desorption activation energy of helium is approximately 2 eV at the low-temperature peak (~785 K) and about 4 eV at the high-temperature peak (~1475 K). An increase in rhenium content causes the desorption peak to shift towards higher temperatures (>1473 K), which is attributed to the formation of the stable complex structures between rhenium and vacancies. Besides, the migration of He-vacancy complexes towards traps and dynamic annealing processes both lead to the recovery of vacancy-type defects, resulting in a decrease in the positron annihilation S parameters.

Different regulation strategies of anaerobic digestion by AC/CaO2 and Fe3O4/CaO2: Reactive oxygen species induction, methanogenic performance, and microbial response.

This study examined the combination of activated carbon and magnetite with calcium peroxide in enhancing the anaerobic digestion (AD) performance of food waste (FW). The individual mechanisms of these two approaches were also clarified. The results indicated that AC/CaO2 achieved the highest specific methane yield of 434.4 mL/g VS, followed by Fe3O4/CaO2 (416.9 mL/g VS). Both were significantly higher than other groups (control, AC, Fe3O4, and CaO2 were 330.1, 341.4, 342.8, and 373.2 mL/g VS, respectively). Additionally, compared to Fe3O4/CaO2, AC/CaO2 further increased reactive oxygen species (ROS), thereby enhancing the hydrolytic acidification process. Simultaneously, the higher ROS levels of Fe3O4/CaO2 and AC/CaO2 promoted the formation of microbial aggregates and established a more robust enzymatic defense system and unique damage repair strategy. The research comparatively analyzed the synergistic mechanism of iron-based and carbon-based conductive materials with CaO2, providing new perspectives for optimizing the AD of FW.

Fast and eco-friendly synthesis of carbon dots from pinecone for highly effective detection of 2,4,6-trinitrophenol in environmental samples.

2,4,6-Trinitrophenol (TNP) has high explosive risks and biological toxicity, and there has been considerable concern over the determination of TNP. In the present work, fluorescent carbon dots (CDs) stemmed from a green carbon source of pinecone by the facile hydrothermal approach. A novel environment- friendly fluorescent probe was developed to efficiently detect TNP by using the obtained CDs with remarkable fluorescence stability. The fluorescent CDs exhibited obvious excitation dependence with the highest peaks for excitation and emission occurring at 321 and 411 nm, respectively. The fluorescence intensity is significantly reduced by TNP owing to the inner filter effect with the CDs. The probe exhibited good linearity with TNP concentrations in the range of 0.025-20 µg mL-1, and the limit of detection was as low as 8.5 ng mL-1. Additionally, the probe proved successful in sensing TNP quantitatively in actual environmental samples with satisfied recoveries of 95.6-99.6%. The developed fluorescent probe offered an environment-friendly, efficient, rapid, and reliable platform for detecting trace TNP in the environmental field.HighlightsNovel carbon dots were synthesised from green precursors of pineal powder.The highly effective quenching process was put down to the inner filter effect.The as-constructed fluorescent probe was successfully utilised for sensing 2,4,6-trinitrophenol in environmental samples.The proposed method was simple, rapid, efficient, economical, and eco-friendly.

Carbonized polymer dots-based molecular imprinting: An adsorbent with enhanced selectivity for highly efficient recognition and removal of ceftiofur sodium from complex samples.

Highly selective removal of residual cephalosporin antibiotics from complex systems is crucial for human health and ecological environment protection. Herein, a newly molecularly imprinted polymer adsorbent (CPDs-NH2@MIP) with enhanced selectivity for ceftiofur sodium (CTFS) was developed by using the special carbonized polymer dots (CPDs-NH2) as functional monomer. The CPDs-NH2 has a nano-spherical structure and functionalized groups (CC, -NH2) via the incomplete carbonization polymerization of citric acid, acrylamide and ethylenediamine, which can accurately interact with CTFS by overcoming steric hindrance, resulting in more precisely imprinted sites and reducing non-imprinted regions in MIP. The presented CPDs-NH2@MIP exhibited excellent adsorption capacity for CTFS (68.62 mg g-1), achieving equilibrium within 10 min, and highly selectivity in mixed solution containing five coexisting substances, with an imprinted factor (5.61). Compared with commercial adsorbents and MIPs prepared with traditional chain functional monomers, the CPDs-NH2@MIP showed significant advantage in selective recognition and separation of target. Analysis of microstructure and mechanism proved that usage of the spherical functional monomer generated precise imprinting sites and dense structure in CPDs-NH2@MIP, which effectively enhanced the selectivity in complex system combined with hydrogen bonding interaction. The idea of designing and using spherical functional monomer will promote the practicality of molecularly imprinted polymer adsorbents.

The correlations between parental warmth and children's approaches to learning: a moderated mediation model of self-efficacy and teacher-child closeness.

Researchers have increasingly considered approaches to learning (ATL) a key indicator of school readiness. Our study purposed to examine the impacts of parental warmth on children's approaches to learning, and the mediating role of self-efficacy, as well as the moderating role of teacher-child closeness in this relationship. Using a whole-group sampling method, 414 Chinese children aged 5-6 years participated this research together with their parents and teachers. Parents of those children were asked to fill out in person questionnaires on parental warmth, children's approaches to learning, and self-efficacy. Children's teachers completed the questionnaire regarding teacher-child closeness. Results indicated that children with high parental warmth were more likely to get high approaches to learning and their self-efficacy played a partial mediating role in this link. In addition, teacher-child closeness moderated the correlation between parental warmth and children's self-efficacy. Specifically, the association between parental warmth and children's self-efficacy was stronger for children with high teacher-child closeness than those with low teacher-child closeness. The results extend our understanding of how parental warmth affects children's approaches to learning, revealing that strategies that could enhance self-efficacy would be effective in improving children's approaches to learning.

Exploring the Effects of Nano-CaCO3 on the Core-Shell Structure and Properties of HDPE/POE/Nano-CaCO3 Ternary Nanocomposites.

To address the dilemma of the stiffness and toughness properties of high-density polyethylene (HDPE) composites, titanate coupling agent-treated CaCO3 nanoparticles (nano-CaCO3) and ethylene-octene copolymer (POE) were utilized to blend with HDPE to prepare ternary nanocomposites via a two-sequence-step process. Meanwhile, a one-step process was also studied as a control. The obtained ternary nanocomposites were characterized by scanning electron microscopy (SEM), Advanced Rheometrics Expansion System (ARES), Dynamic Mechanical Analysis (DMA), wide-angle X-ray diffraction analysis (WXRD), and mechanical test. The SEM results showed one or two CaCO3 nanoparticles were well-encapsulated by POE and were uniformly dispersed into the HDPE matrix to form a core-shell structure of 100-200 nm in size by the two-step process, while CaCO3 nanoparticles were aggregated in the HDPE matrix by the one-step method. The result of the XRD showed that the nano-CaCO3 particle played a role in promoting crystallization in HDPE nanocomposites. Mechanical tests showed that the synergistic effect of both the POE elastomer and CaCO3 nanoparticles should account for the balanced performance of the ternary composites. In comparison with neat HDPE, the notched impact toughness of the ternary nanocomposites of HDPE/POE/nano-CaCO3 was significantly increased. In addition, the core-shell structure absorbed the fracture impact energy and prevent further propagation of micro-cracks, thus obtaining a higher notched Izod impact strength.

Macrophage polarization in adenomyosis: A review.

Adenomyosis (AM) is a common gynecological disorder characterized by the presence of endometrial glands and stroma within the uterine myometrium. It is associated with abnormal uterine bleeding (AUB), dysmenorrhea, and infertility. Although several mechanisms have been proposed to elucidate AM, the exact cause and development of the condition remain unclear. Recent studies have highlighted the significance of macrophage polarization in the microenvironment, which plays a crucial role in AM initiation and progression. However, a comprehensive review regarding the role and regulatory mechanism of macrophage polarization in AM is currently lacking. Therefore, this review aims to summarize the phenotype and function of macrophage polarization and the phenomenon of the polarization of adenomyosis-associated macrophages (AAMs). It also elaborates on the role and regulatory mechanism of AAM polarization in invasion/migration, fibrosis, angiogenesis, dysmenorrhea, and infertility. Furthermore, this review explores the underlying molecular mechanisms of AAM polarization and suggests future research directions. In conclusion, this review provides a new perspective on understanding the pathogenesis of AM and provides a theoretical foundation for developing targeted drugs through the regulation of AAM polarization.

Enhanced identification and localization of metabolites in Scutellariae Radix using ion mobility enabled MALDI-Q-TOF/MS imaging.

Image 1.

Metaproteomics analysis of anaerobic digestion of food waste by the addition of calcium peroxide and magnetite.

Adding trace calcium peroxide and magnetite into a semi-continuous digester is a new method to effectively improve the anaerobic digestion of food waste. However, the microbial mechanism in this system has not been fully explored. Metaproteomics further revealed that the most active and significantly regulated genus u_p_Chloroflexi had formed a good cooperative relationship with Methanomicrobiales and Methanothrix in the system. u_p_Chloroflexi decomposed more organic compounds into CO2, acetate, amino acids, and other substances by alternating between short aerobic-anaerobic respiration. It perceived and adapted to the surrounding environment by producing biofilm, extracellular enzymes, and accelerating substrate transport, formed a respiratory barrier, and enhanced iron transport capacity by using highly expressed cytochrome C. The methanogens formed reactive oxygen species scavengers and reduced iron transport to prevent oxidative damage. This study provides new insight for improving the efficiency of anaerobic digestion of food waste and identifying key microorganisms and their regulated functional proteins in the calcium peroxide-magnetite digestion system.IMPORTANCEPrevious study has found that the combination of calcium peroxide and magnetite has a good promoting effect on the anaerobic digestion process of food waste. Through multiple omics approaches, information such as microbial population structure and changes in metabolites can be further analyzed. This study can help researchers gain a deeper understanding of the digestion pathway of food waste under the combined action of calcium peroxide and magnetite, further elucidate the impact mechanisms of calcium peroxide and magnetite at the microbial level, and provide theoretical guidance to improve the efficiency and stability of anaerobic digestion of food waste, as well as reduce operational costs. This research contributes to improving energy recovery efficiency, promoting sustainable management and development of food waste, and is of great significance to environmental protection.

Efficient rural sewage treatment with manganese sand-pyrite soil infiltration systems: Performance, mechanisms, and emissions reduction.

The application of soil infiltration systems (SISs) in rural domestic sewage (RDS) is limited due to suboptimal denitrification resulting from factors such as low C/N (<5). This study introduced filler-enhanced SISs and investigated parameter impacts on pollutant removal efficiency and greenhouse gas (GHG) emission reduction. The results showed that Mn sand-pyrite SISs, with hydraulic load ratios of 0.003 m3/m2·h and dry-wet ratios of 3:1, achieved excellent removal efficiency of COD (92.7 %), NH4+-N (95.8 %), and TN (76.4 %). Moreover, N2O and CH4 emission flux were 0.046 and 0.019 mg/m2·d, respectively. X-ray photoelectron spectroscopy showed that the relative concentrations of Mn(Ⅱ) in Mn sand and Fe(Ⅲ) and SO42- in pyrite increased after the experiment. High-throughput sequencing indicated that denitrification was mainly performed by Thiobacillus. This study demonstrated that RDS treatment using the enhanced SIS resulted in efficient denitrification and GHG reduction.

A novel carbonized polymer dots-based molecularly imprinted polymer with superior affinity and selectivity for oxytetracycline removal.

Molecularly imprinted polymers (MIPs) synthesized from chain functional monomers are restricted by spatial extension and exhibit relatively poor affinity and selectivity; this results in unsatisfactory applications in complex media. In this study, we prepared unique spherical carbonized polymer dots (CPDs-OH) via the incomplete carbonization of 1-allyl-3-vinylimidazolium bromide and ethylene glycol, and used it as a functional monomer to prepare a newly imprinted polymer (CPDs-OH@MIP) in aqueous media. As a result, the CPDs-OH@MIP exhibited effective recognition of oxytetracycline with an impressive imprinting factor of 6.17, surpassing MIPs prepared with chain functional monomers (1-3). Furthermore, CPDs-OH@MIP exhibited excellent adsorption for oxytetracycline (278.52 mg g-1) and achieved equilibrium in 30 min, with stronger resistance to coexisting cations, anions, and humic acid. Compared to other MIPs and adsorbents, the recognition performance of CPDs-OH@MIP improved 2-4 times; this polymer could remove >92.1% of oxytetracycline in real water samples with at least 10 cycle times. CPDs-OH@MIP prepared using the special spherical monomer forms a denser structure with fewer nonimprinted regions and precisely imprinted sites, remarkably improving the affinity and selectivity of MIPs combined via hydrogen bonds and electrostatic and π-π interactions. Our proposed strategy provides an effective basis for breakthroughs in the practical application of MIPs.

Constructing an eco-friendly and ratiometric fluorescent sensor for highly efficient detection of mercury ion in environmental samples.

Mercury ion (Hg2+) is a highly toxic and ubiquitous pollutant, whose effective detection has aroused widespread concern. A novel ratiometric fluorescent sensor has been designed to rapidly and efficiently detect Hg2+ based on blue/red carbon dots (CDs) with environmental friendliness. This sensor was well characterized via TEM, FTIR, XPS, UV-vis, and zeta potential analysis and displayed excellent fluorescence properties and stability. The fluorescence of blue CDs at 447 nm was significantly quenched with the addition of Hg2+ resulted from the static quenching, whereas that of red CDs at 650 nm remained invariable. A sensitive method for Hg2+ determination was constructed in the range of 0.05-7.0 nmol mL-1 with optimal conditions, and the detection limit was down to 0.028 nmol mL-1. Meanwhile, compared to other 17 metal ions, the ratiometric fluorescent sensor exhibited high selectivity for Hg2+. Furthermore, satisfied recoveries had also been obtained for measuring trace Hg2+ in practical environmental samples. This developed ratiometric fluorescent sensor provided a reliable, environmental-friendly, rapid, and efficient platform for the detection of Hg2+ in environmental applications.

Corrigendum: Multi-channel EEG emotion recognition using Residual Graph Attention Neural Network.

[This corrects the article DOI: 10.3389/fnins.2023.1135850.].

Predictive value of Dmax and %ΔSUVmax of 18F-FDG PET/CT for the prognosis of patients with diffuse large B-cell lymphoma.

PURPOSE: To investigate the prognosis value of a combined model based on 18F-fluoro-deoxyglucose positron emission tomography-computed tomography (18F-FDG PET-CT) baseline and interim parameters in patients with diffuse large B-cell lymphoma (DLBCL). METHODS: We retrospectively analyzed the PET metabolic parameters and clinical data of 154 DLBCL patients between December 2015 and October 2020. All of these patients underwent 18F-FDG PET/CT scan before treatment and after three or four courses of chemotherapy. The optimal cut-off values for quantitative variables were determined by the receiver operating characteristic (ROC) curve. The baseline and interim PET/CT parameters, which respectively included maximum standardized uptake value (SUVmax0), total metabolic tumor volume (TMTV0), standardized total metabolic tumor volume (STMTV0), and the distance between the two furthest lesions (Dmax) and total tumor lesion glycolysis (TTLG1), SUVmax1, TMTV1, and the rate of change of SUVmax (%ΔSUVmax), and clinical characteristics were analyzed by chi-squared test, Kaplan-Meier survival curve, and Cox regression analysis. RESULTS: Of 154 patients, 35 exhibited disease progression or recurrence. ROC analysis revealed that baseline 18F-FDG PET/CT metabolic parameters, including maximum standardized uptake value (SUVmax0), total metabolic tumor volume (TMTV0), standardized total metabolic tumor volume (STMTV0), and the distance between the two furthest lesions (Dmax), along with interim 18F-FDG PET/CT metabolic parameters such as total tumor lesion glycolysis (TTLG1), SUVmax1, TMTV1, and the rate of change of SUVmax (%ΔSUVmax), were predictive of relapse or progression in DLBCL patients (P < 0.05). The chi-squared test showed that TMTV0, STMTV0, Dmax, SUVmax1, TMTV1, TTLG1, %ΔSUVmax, Deauville score, IPI, Ann Arbor stage, and LDH were associated with patient prognosis (P < 0.05). Multivariate Cox regression analysis showed that Dmax (P = 0.021) and %ΔSUVmax (P = 0.030) were independent predictors of prognosis in DLBCL patients. There were statistically significant differences in PFS among the three groups with high, intermediate, and low risk according to the combination model (P < 0.001). The combination model presented higher predictive efficacy than single indicators. CONCLUSION: The combined model of baseline parameter Dmax and intermediate parameter %ΔSUVmax of 18F-FDG PET/CT improved the predictive efficacy of PFS and contributed to the risk stratification of patients, providing a reference for clinical individualization and precision treatment.

Polydatin inhibited TNF-α-induced apoptosis of skeletal muscle cells through AKT-mediated p38 MAPK and NF-κB pathways.

Skeletal muscle atrophy severely impacts one's quality of life. The effects and mechanism of polydatin on skeletal muscle atrophy are unclear. This study investigated the effects and mechanism of polydatin on TNF-α-induced skeletal muscle cells. The skeletal muscle cell atrophy model was established by inducing C2C12 cells with TNF-α. Cell viability, IL-1ß levels and cell apoptosis were assessed. The mRNA and protein expression levels of apoptosis-related proteins were measured. Meanwhile, the binding of polydatin to AKT was analyzed by molecular docking. TNF-α reduced cell fusion and viability while up-regulated IL-1ß level and promoted cell apoptosis. TNF-α activated AKT, NF-κB, and p38 MAPK signaling pathways. Polydatin reversed these effects induced by TNF-α, with a low concentration being more effective. Polydatin was predicted to bind to GLY162, PHE161, GLU198, THR195 and GLU191 sites of AKT protein through van der Waals force and conventional hydrogen bonds. Overexpression of AKT led to increased phosphorylation levels of AKT, p38, and p65 proteins, as well as IL-1ß levels and cell apoptosis. Polydatin inhibited TNF-α-induced apoptosis of C2C12 cells by regulating NF-κB and p38 MAPK signaling pathways through AKT. This suggests that polydatin shows promise as a new drug for the treatment of skeletal muscle atrophy.

The associations between academic stress and depression among college students: A moderated chain mediation model of negative affect, sleep quality, and social support.

BACKGROUND: Growing competition in tight job market and academic excellence as a social norm in Asian culture have made Chinese college students burdened with immense academic stress. OBJECTIVES: This study aimed to explore the associations between academic stress and depression, and the mediating roles of negative affect and sleep quality, as well as the moderating role of social support in the relationship between negative affect and sleep quality. METHODOLOGY: A convenience sample of 221 male and 479 female college students aged between 17 and 25 completed questionnaires on academic stress, depression, negative affect, sleep quality and social support. RESULTS: Results indicated that academic stress could not only directly affect depression (b = 0.31, p < 001), but also affect depression through the mediation role of negative affect and sleep quality. The chain mediating effects includes three paths, namely, the mediating role of negative affect (indirect effect = 0.21, percentage of total effect = 69.58 %), the mediating role of sleep quality (indirect effect = 0.06, percentage of total effect = 21.03 %), and the chain mediating role of negative affect and sleep quality (indirect effect = 0.06, percentage of total effect = 19.86 %). Social support moderated the adverse influence of negative affect on sleep quality. Social support decreases the impact of negative affect on sleep quality. Specifically, the association between negative affect and sleep quality was stronger for college students with low (bsimple = 0.44, p < 0.001) social support than those with high (bsimple = 0.32, p < 0.001) social support. IMPLICATIONS: The results advanced our understanding of how academic stress affects college students' depression. These findings provide implications on the cultivation of stress coping strategies, promotion of emotion regulation skills, exaltation of sleep quality, and improvement of the social support level aiming for future depression preventions and interventions. Specific measures include setting up psychological health courses, teaching emotion management strategies, and establishing web-based programme steming from acceptance and commitment therapy. It should be noted that the cross-sectional design means the causal associations among the variables could not be determined.