Atomically Dispersed Dual-Metal ORR Catalyst with Hierarchical Porous Structure for Zn-Air Batteries.

The metal-nitrogen-carbon (M-N-C)-based catalysts are promising to replace PGM (platinum group metal) to accelerate oxygen reduction reaction due to their excellent electrocatalytic performance. However, the inferior intrinsic activity and poor active site density confining further improvement in their performance. Modulating the electronic structure and reasonably designing the pore structure are widely acknowledged effective strategies to boost the activity of the M-N-C catalysts. However, it is a great challenge to form abundant pores to regulate the electronic structure via the facile method. Herein, a hierarchical, porous dual-atom catalyst FeNi-NPC-1000 has been architectured by the Na2CO3 template method and bimetallic doping modification strategy. Benefitting from the optimized pore and electronic structure, the as-prepared FeNi-NPC-1000 possesses a high specific surface area (1412.8 m2 g-1) and improved ORR activity (E1/2 = 0.877 V vs RHE), which is superior to that of Pt/C (E1/2 = 0.867 V vs RHE). With the evidence of AC-STEM, XAS, and DFT, the FeNi-N8-C moiety is proven to be the key active site to realize high-efficiency ORR catalysis. When assembled it as an air cathode of ZABs, FeNi-NPC-1000 displays superior discharge performance (Pmax = 367.1 mW cm-2) and a stable battery long-life. This article will provide a new strategy for designing dual-metal atomic catalysts applied in metal-air batteries.

Effect of two surgical approaches on the lung function and prognosis of patients with combined esophagogastric cancer.

BACKGROUND: Adenocarcinoma of the esophagogastric junction has a center of origin within 5 cm of the esophagogastric junction. Surgical resection remains the main treatment. A transthoracic approach is recommended for Siewert I adenocarcinoma of the esophagogastric junction and a transabdominal approach is recommended for Siewert III adenocarcinoma of the esophagogastric junction. However, there is a need to determine the optimal surgical approach for Siewert II adenocarcinoma of the esophagogastric junction to improve lung function and the prognosis of patients. AIM: To investigate and compare the surgical effects, postoperative changes in pulmonary function, and prognoses of two approaches to treating combined esophagogastric cancer. METHODS: One hundred and thirty-eight patients with combined esophagogastric cancer treated by general and thoracic surgeries in our hospital were selected. They were divided into group A comprising 70 patients (transabdominal approach) and group B comprising 68 patients (transthoracic approach) based on the surgical approach. The indexes related to surgical trauma, number of removed lymph nodes, indexes of lung function before and after surgery, survival rate, and survival duration of the two groups were compared 3 years after surgery. RESULTS: The duration of surgery, length of hospital stay, and postoperative drainage duration of the patients in group A were shorter than those of the patients in group B, and the volume of blood loss caused by surgery was lower for group A than for group B (P < 0.05). At the one-month postoperative review, the first second, maximum ventilation volume, forceful lung volume, and lung volume values were higher for group A than for group B (P < 0.05). Preoperatively, the QLQ-OES18 scale scores of the patients in group A were higher than those in group B on re-evaluation at 3 mo postoperatively (P < 0.05). The surgical complication rate of the patients in group A was 10.00%, which was lower than that of patients in group B, which was 23.53% (P < 0.05). CONCLUSION: Transabdominal and transthoracic surgical approaches are comparable in treating combined esophagogastric cancer; however, the former results in lesser surgical trauma, milder changes in pulmonary function, and fewer complications.

Anti-Shedding Nickel-Protection-Layer Boosting an Ultrahigh Loading Carbon Fiber@Co-NiSx Electrode to Deliver Superior Areal/Volumetric/Gravimetric Capacitance.

Challenges remain to show good capacitive performance while achieving high loadings of active materials for supercapacitors. Trying to realize this version, a nickel-protecting carbon fiber paper@Co-doped NiSx (Ni-CP@Co-NiSx) electrode with high specific gravimetric, areal, and volumetric capacitance is reported in this work. This free-standing electrode is prepared by an electroplating-hydrothermal-electroplating (EHE) three-step method to achieve a high loading of almost 26.7 mg cm-2. The cobalt-doping and nickel-protection strategies effectively decrease the impedance and inhibit the active material dropping from the electrode resulting from the expansion stress, which endows the Ni-CP@Co-NiSx electrode with a high rate and good cycling performance, especially with an ultrahigh specific areal/volumetric/gravimetric capacitance of 53.3 F cm-2/2807 F cm-3/1997 F g-1 at 5 mA cm-2, respectively. Employing activated carbon functionalized with riboflavin (AC/VB2) as a negative electrode, the asymmetric supercapacitor device delivers a very high energy density of up to 60.4 W h kg-1. This work demonstrates that electrodes with a high loading density and excellent performance can be obtained by the combination of the EHE method to adjust the internal conductivity and external structural stability.

Defect-engineered Sulfur Vacancy Modified NiCo2 S4-x Nanosheet Anchoring Polysulfide for Improved Lithium Sulfur Batteries.

The low conductivity of sulfur and the shuttle effect of lithium polysulfides (LiPSs) are the two intrinsic obstacles that limit the application of lithium-sulfur batteries (LSBs). Herein, a sulfur vacancy introduced NiCo2 S4 nanosheet array grown on carbon nanofiber (CNF) membrane (NiCo2 S4-x /CNF) is proposed to serve as a self-supporting and binder-free interlayer in LSBs. The conductive CNF skeleton with a non-woven structure can effectively reduce the resistance of the cathode and accommodate volume expansion during charge-discharge process. The bonding between CNF matrix and NiCo2 S4 nanosheet is enhanced by in situ growth, ensuring fast electron transfer. Besides, the sulfur vacancies in NiCo2 S4 enhance the chemisorption of LiPSs, and the highly active sites at vacancies can accelerate the LiPSs conversion kinetics. LSB paired with NiCo2 S4-x /CNF interlayer achieved improved stability in 500 cycles at 0.2 C and long life of 3000 cycles at 3 C. More importantly, a high areal capacity of 9.69 mAh cm-2 is achieved with a sulfur loading of 10.8 mg cm-2 and a low electrolyte to sulfur (E/S) ratio of 4.8. This work provides insight into the sulfur vacancy in catalysis design for LiPSs conversion and demonstrates a promising direction for electronic defect engineering in material design for LSBs.

Advances in Transition-Metal-Based Dual-Atom Oxygen Electrocatalysts.

Oxygen electrocatalysis has aroused considerable interest over the past years because of the new energy technologies boom in hydrogen energy and metal-air battery. However, due to the sluggish kinetic of the four-electron transfer process in oxygen reduction reaction and oxygen evolution reaction, the electro-catalysts are urgently needed to accelerate the oxygen electrocatalysis. Benefit from the high atom utilization efficiency, unprecedentedly high catalytic activity, and selectivity, single-atom catalysts (SACs) are considered the most promising candidate to replace the traditional Pt-group-metal catalysts. Compared with SACs, the dual-atom catalysts (DACs) are attracting more attraction including higher metal loading, more versatile active sites, and excellent catalytic activity. Therefore, it is essential to explore the new universal methods approaching to the preparation, characterization, and to elucidate the catalytic mechanisms of the DACs. In this review, several general synthetic strategies and structural characterization methods of DACs are introduced and the involved oxygen catalytic mechanisms are discussed. Moreover, the state-of-the-art electrocatalytic applications including fuel cells, metal-air batteries, and water splitting have been sorted out at present. The authors hope this review has given some insights and inspiration to the researches about DACs in electro-catalysis.

Heteroatom Coordination Regulates Iron Single-Atom-Catalyst with Superior Oxygen Reduction Reaction Performance for Aqueous Zn-Air Battery.

Platinum group metal (PGM)-free M-N-C catalysts have exhibited dramatic electrocatalytic performance and are considered the most promising candidate of the Pt catalysts in oxygen reduction reaction (ORR). However, the electrocatalytic performance of the M-N-C catalysts is still limited by their inferior intrinsic activity and finite active site density. Regulating the coordination environment and increasing the pore structure of the catalyst is an effective strategy to enhance the electrocatalytic performance of the M-N-C catalysts. In this work, the coordination environment and pore structure exquisitely regulated Fe-N-C catalyst exhibit excellent ORR activity and durability. With the enhanced intrinsic activity and increased active site density, the optimized Fe-N/S-C catalyst shows impressive ORR activity (E1/2  = 0.904 V vs reversible hydrogen electrode (RHE)) and superior long-term durability in an alkaline medium. As the advanced physical characterization and theoretical chemistry methods illustrate, the S-modified Fe-Nx (Fe-N3 /S-C) moiety is confirmed as the improved active center for ORR, and the increased active site density further improved ORR efficiency. Based on the Fe-N/S-C cathode, a Zn-air battery is fabricated and shows superior power density (315.4 mW cm-2 ) and long-term discharge stability at 20 mA cm-2 . This work would open a new perspective to design atomically dispersed iron-metal site catalysts for advanced electro-catalysis.

Tin disulfide embedded on porous carbon spheres for accelerating polysulfide conversion kinetics toward lithium-sulfur batteries.

Lithium-sulfur (Li-S) batteries are considered promising candidates for next-generation advanced energy storage systems due to their high theoretical capacity, low cost and environmental friendliness. However, the severe shuttle effect and weak redox reaction severely restrict the practical application of Li-S batteries. Herein, a functional catalytic material of tin disulfide on porous carbon spheres (SnS2@CS) is designed as a sulfur host and separator modifier for lithium-sulfur batteries. SnS2@CS with high electrical conductivity, high specific surface area and abundant active sites can not only effectively improve the electrochemical activity but also accelerate the capture/diffusion of polysulfides. Theoretical calculations and in situ Raman also demonstrate that SnS2@CS can efficiently adsorb and catalyse the rapid conversion of polysulfides. Based on these advantages, the SnS2@CS-based Li-S battery delivers an excellent reversible capacity of 868 mAh/g at 0.5C (capacity retention of 96 %), a high rate capability of 852 mAh/g at 2C, and a durable cycle life with an ultralow capacity decay rate of 0.029 % per cycle over 1000 cycles at 2C. This work combines the design of sulfur electrodes and the modification of separators, which provides an idea for practical applications of Li-S batteries in the future.

Defect-Rich Single Atom Catalyst Enhanced Polysulfide Conversion Kinetics to Upgrade Performance of Li-S Batteries.

Lithium-sulfur (Li-S) batteries have attracted considerable attention owing to their extremely high energy densities. However, the application of Li-S batteries has been limited by low sulfur utilization, poor cycle stability, and low rate capability. Accelerating the rapid transformation of polysulfides is an effective approach for addressing these obstacles. In this study, a defect-rich single-atom catalytic material (Fe-N4/DCS) is designed. The abundantly defective environment is favorable for the uniform dispersion and stable existence of single-atom Fe, which not only improves the utilization of single-atom Fe but also efficiently adsorbs polysulfides and catalyzes the rapid transformation of polysulfides. To fully exploit the catalytic activity, catalytic materials are used to modify the routine separator (Fe-N4 /DCS/PP). Density functional theory and in situ Raman spectroscopy are used to demonstrate that Fe-N4 /DCS can effectively inhibit the shuttling of polysulfides and accelerate the redox reaction. Consequently, the Li-S battery with the modified separator achieves an ultralong cycle life (a capacity decay rate of only 0.03% per cycle at a current of 2 C after 800 cycles), and an excellent rate capability (894 mAh g-1 at 3 C). Even at a high sulfur loading of 5.51 mg cm-2 at 0.2 C, the reversible areal capacity still reaches 5.4 mAh cm-2 .

Restriction of voltage decay by limiting low-voltage reduction in Li-rich oxide materials.

Li-rich layered oxides are recognized as promising candidates for next-generation Li-ion batteries owing to the high capacity of >250 mAh g-1, but the severe voltage fade has prevented their commercialization. It is widely known that high-voltage charge processes result in layered-to-spinel structural evolution and voltage fade in Li-rich layered oxides. This work emphasizes that limiting the low-voltage reduction can maintain the structure and voltage stability of Li-rich layered oxides after the 4.6 V high-voltage charge processes. A strategy of limiting the low-voltage (<2.8 V) reduction by cycling at 4.6-2.8 V was performed in traditional Li1.2Ni0.13Mn0.54Co0.13O2 and high-Ni Li1.2Ni0.222Mn0.504Co0.074O2. After 300 cycles, traditional Li1.2Ni0.13Mn0.54Co0.13O2 and high-Ni Li1.2Ni0.222Mn0.504Co0.074O2 cycling at 4.6-2 V showed midpoint discharge voltages of 2.83 V and 2.97 V with high voltage fade rates of 2.25 mV/cycle and 2.24 mV/cycle, respectively. While the two materials cycling at 4.6-2.8 V can maintain discharge midpoint voltages of 3.34 V and 3.49 V, with low voltage decay rates of 0.692 mV/cycle and 0.632 mV/cycle, respectively. To better understand the voltage performance, their electric structures were calculated by density functional theory. Physical characterizations were also used to analyze their differences in structural evolution. The results suggested that limiting low-voltage reduction in Li-rich layered oxides is highly necessary for maintaining their structure and voltage stability.

A Highly Efficient Sulfur Host Enabled by Nitrogen/Oxygen Dual-Doped Honeycomb-Like Carbon for Advanced Lithium-Sulfur Batteries.

High energy density and long cycle life of lithium-sulfur (Li-S) batteries suffer from the shuttle/expansion effect. Sufficient sulfur storage space, local fixation of polysulfides, and outstanding electrical conductivity are crucial for a robust cathode host. Herein, a modified template method is proposed to synthesize a highly regular and uniform nitrogen/oxygen dual-doped honeycomb-like carbon as sulfur host (N/O-HC-S). The unique structure not only offers physical entrapment for polysulfides (LiPSs) but also provides chemical adsorption and catalytic conversion sites of polysulfides. In addition, this structure offers enough space for loading sulfur, and a regular space of nanometer size can effectively prevent sulfur particles from accumulating. As expected, the as-prepared N/O-HC900-S with high areal sulfur loading (7.4 mg cm-2 ) shows a high areal specific capacity of 7.35 mAh cm-2 at 0.2 C. Theoretical calculations also reveal that the strong chemical immobilization and catalytic conversion of LiPSs attributed to the spin density and charge distribution of carbon atoms will be influenced by the neighbor nitrogen/oxygen dopants. This structure that provides cooperative chemical adsorption, high lithium ions flux, and catalytic conversion for LiPSs can offer a new strategy for constructing a polysulfide confinement structure to achieve robust Li-S batteries.

Enhanced electrochemical properties of potassium-doped lithium-rich oxide@carbon as cathode material for lithium-ion batteries.

Lithium-rich layered oxides are believed to be the most competitive cathode materials for next-generation lithium-ion batteries (LIBs) due to their high specific capacity, but the poor cycle stability and voltage attenuation severely limit their commercial applications. In this paper, a simple method combining surface treatment via pyrolysis of polyvinyl alcohol (PVA) and potassium ions (K+) doping, is designed to improve the above defects of the cobalt-free Lithium-rich material Li1.2Mn0.6Ni0.2O2 (LMR). The insoluble surface byproduct Li2CO3 and amorphous carbon nanolayer derived from the pyrolysis process of PVA alleviate the corrosion of acidic species with a favorable conductivity, while a large radius of K+ can enlarge the space of the lithium (Li) layer to facilitate the diffusion of Li+, suppress voltage polarization, and synchronously restrain the transformation from a layered structure to a spinel-like structure. After modification, the LMR material exhibits a great initial discharge capacity of 266.0 mAh g-1 at 0.1C, a remarkable rate capability of 159.1 mAh g-1 at 5C and an extremely high capacity retention of 98.5% over 200 cycles at 0.5C with a small voltage drop.

N,O-codoped carbon spheres with uniform mesoporous entangled Co3O4 nanoparticles as a highly efficient electrocatalyst for oxygen reduction in a Zn-air battery.

Highly efficient electrochemical catalysts for oxygen reduction reactions (ORRs) are urgently needed for various energy conversion and storage devices to overcome sluggish ORR kinetics. Here, N,O-codoped carbon spheres with uniform mesopores and a high specific surface area were used as supports for decorating Co3O4 nanoparticles via a facile immersion route. In addition to the benefit of ions and gas mass transfer, the abundant mesopores present in the three-dimensional (3D) carbon spheres also confine and isolate the Co3O4 nanoparticles growing in it, which help to provide rich Co3O4 active sites. The resulting hybrid material exhibits superior ORR activity in terms of even-better half-wave potential and stability than that of commercial Pt/C (40 wt%) in 0.1 M KOH electrolyte. To verify its catalytic activity, the hybrid material was employed as the cathode catalyst in a flexible solid-state zinc-air battery, which achieves a high power density of 227 mW cm-2; this power density is much higher than that of a Pt/C catalytic zinc-air battery (133 mW cm-2) under identical conditions. The improvement in catalytic activity in both aqueous and nonaqueous electrolytes can be attributed to the abundant active sites of the entangled Co3O4 nanoparticles, as well as the novel N,O-codoped carbon structure.

A calcium fluoride composite reduction graphene oxide functional separator for lithium-sulfur batteries to inhibit polysulfide shuttling and mitigate lithium dendrites.

Lithium-sulfur (Li-S) batteries have attracted tremendous attention as promising next-generation energy-storage systems due to their high specific capacity and high specific energy. However, the shuttle of polysulfides and the growth of Li dendrites severely obstruct the practical applications of these batteries. In this work, a functional separator is designed and fabricated in which nano-calcium fluoride (CaF2) particles are embedded in reduced graphene oxide (rGO) and bladed on a PP separator. The density functional theory (DFT) calculations of the adsorption energy and bond length reveal that CaF2 has a satisfying adsorption and catalytic effect on polysulfides (Li2Sn). The factional separator could accelerate homogenous Li+ flow and retard the growth of Li dendrites. In addition, an initial specific capacity of 1504 mAh g-1 at 0.05C is achieved, and it still retains a discharge capacity of 1050 mAh g-1 over 100 cycles at 0.2C. Moreover, the capacity decay rate is only 0.06% per cycle over 420 cycles at a high current density of 0.5 C. The excellent performance could be attributed to the CaF2@rGO modified separator not only accelerating the transmission of electrons but also effectively inhibiting the shuttling of polysulfides. This work provides a better method for attaining practical applications of high-performance lithium-sulfur batteries.

Stability-Enhanced α-Ni(OH)2 Pillared by Metaborate Anions for Pseudocapacitors.

α-Ni(OH)2 is an ideal candidate material for a supercapacitor except for its low conductivity and poor stability. In this work, BO2--intercalated α-NixCo(1-x)(OH)2 is synthesized by a hydrothermal method at a low cost. The Co dopant can decrease the charge-transfer resistance and enhance the cyclic stability. The special unsaturated electronic state of BO2- enhances the bonding with metal ions and attracts water molecules. Thus, the BO2- ions support the hydroxide layers as pillars and create efficient paths for proton transportation, optimizing the utilization of α-Ni(OH)2. The three-dimensional (3D) flowerlike morphology supplies an enormous number of active sites, and r-GO is added to improve the conductivity. As a result, the modified α-Ni(OH)2 exhibits the specific capacitance of 2179, 1592, and 1423 F·g-1 at 1, 20, and 40 A·g-1, respectively, showing improved rate performance. Matching with the commercial activated carbon (AC) as an anode, the asymmetric capacitor delivers an energy density of 40.66 W·h·kg-1 when its power density is 187.06 W·kg-1. Meanwhile, it retains 81.5% capacitance of the initial cycle at 5 A·g-1 after 3000 cycles. With conductivity enhanced and structure stabilized, the modified α-Ni(OH)2 confronts broader fields of application.

Electrospinning Highly Dispersed Ru Nanoparticle-Embedded Carbon Nanofibers Boost CO2 Reduction in a H2/CO2 Fuel Cell.

A H2/CO2 fuel cell is a promising device that can convert CO2 into hydrocarbon fuel with electricity generation. Herein, a facile electrospinning method has been used to synthesize the embedded Ru-CNF catalyst in which Ru nanoparticles are dispersed homogeneously within N-doped carbon nanofibers. This catalyst exhibits a high CH4 production rate of 308.46 µmol gcat-1 h-1 at 170 °C, which is superior to that of the Ru/CNF (242.53 µmol gcat-1 h-1) and Ru/CNT (194.24 µmol gcat-1 h-1). The enhanced CO2RR performance of Ru-CNF is ascribed to the well-distributed Ru nanoparticles within the CNF matrix and synergistic effect of Ru sites with N species, which results in forming the increased CO2RR active sites, hence improving the catalytic activity. Simultaneously, it can achieve a peak power density of 1.8 W m-2 on the strength of anodic (H2 oxidation) and cathodic (CO2 reduction and H2 evolution) reactions with remarkable stability. Such findings give a theoretical basis of CO2RR in the H2/CO2 fuel cell system, which could hold great value to further develop the high-efficiency catalysts for CO2 reduction.

Factors that affect the duration of wearing disposable personal protective equipment by healthcare professionals in Wuhan during treatment of COVID-19 patients: An epidemiological study.

The purpose of this study of healthcare workers who cared for COVID-19 patients was to identify factors that affected the duration of wearing personal protective equipment (PPE). The results of this study will provide initial guidance to practicing clinicians and a foundation for further research on this topic. This cross-sectional study examined 139 frontline healthcare professionals who worked at a single hospital in Wuhan, China, from March 16 to April 1, 2020. General and demographic data, physical and mental status, use of personal protective equipment, type of hospital work, and duration of wearing personal protective equipment were recorded. The mean duration of wearing personal protective equipment was 194.17 min (standard deviation: 3.71). Multiple linear regression analysis indicated that the duration of wearing personal protective equipment was significantly associated with the presence of a chronic disease, working hours when feeling discomfort, lack of patient cooperation and subsequent psychological pressure, prolonged continuous wearing of personal protective equipment, feeling anxious about physical strength, and the presence of fatigue when wearing personal protective equipment. These factors should be considered by practicing healthcare professionals and in future studies that examine the optimal duration of wearing personal protective equipment.

The effectiveness of diaphragmatic breathing relaxation training for improving sleep quality among nursing staff during the COVID-19 outbreak: a before and after study.

OBJECTIVES: Recent studies have demonstrated that first-line nurses involved in the coronavirus disease-2019 (COVID-19) crisis may experience sleep disturbances. As breathing relaxation techniques can improve sleep quality, anxiety, and depression, the current study aimed to evaluate the effectiveness of diaphragmatic breathing relaxation training (DBRT) for improving sleep quality among nurses in Wuhan, China during the COVID-19 outbreak. METHODS: This study used a quasi-experimental (before and after) intervention strategy, with 151 first-line nurses from four wards in Leishenshan hospital. The Pittsburgh Sleep Quality Index (PSQI), Self-Rating Anxiety Scale (SAS), and Self-Rating Depression Scale (SDS) to evaluate the effectiveness of DBRT before and after the intervention. Data were examined using the Shapiro-Wilk test, Levene's test, and paired t-test. RESULTS: A total of 140 nurses completed the DBRT sessions. First-line nurses achieved significant reductions in global sleep quality (p < 0.01), subjective sleep quality (p < 0.001), sleep latency (p < 0.01), sleep duration (p < 0.001), sleep disturbances (p < 0.001), habitual sleep efficiency (p = 0.015), daytime dysfunction (p = 0.001), and anxiety (p = 0.001). There were no significant reductions in the use of sleeping medication (p = 0.134) and depression (p = 0.359). CONCLUSION: DBRT is a useful non-pharmacological treatment for improving sleep quality and reducing anxiety among first-line nurses involved in the COVID-19 outbreak. The study protocol was clinically registered by the Chinese Clinical Trial Registry. CLINICAL TRIAL REGISTRATION NUMBER: ChiCTR2000032743.

Potassium Nickel Iron Hexacyanoferrate as Ultra-Long-Life Cathode Material for Potassium-Ion Batteries with High Energy Density.

The abundant reserve and low price of potassium resources promote K-ion batteries (KIBs) becoming a promising alternative to Li-ion batteries, while the large ionic radius of K-ions creates a formidable challenge for developing suitable electrodes. Here Ni-substituted Prussian blue analogues (PBAs) are investigated comprehensively as cathodes for KIBs. The synthesized K1.90Ni0.5Fe0.5[Fe(CN)6]0.89·0.42H2O (KNFHCF-1/2) takes advantage of the merits of high capacity from electrochemically active Fe-ions, outstanding electrochemical kinetics induced by decreased band gap and K-ion diffusion activation energy, and admirable structure stability from inert Ni-ions. Therefore, a high first capacity of 81.6 mAh·g-1 at 10 mA·g-1, an excellent rate property (53.4 mAh·g-1 at 500 mA·g-1), and a long-term lifespan over 1000 cycles with the lowest fading rate of 0.0177% per cycle at 100 mA·g-1 can be achieved for KNFHCF-1/2. The K-ion intercalation/deintercalation proceeds through a facile solid solution mechanism, allowing 1.5-electron transfer based on low- and high-spins FeII/FeIII couples, which is verified by ex situ XRD, XPS, and DFT calculations. The K-ion full battery is also demonstrated using a graphite anode with a high energy density of 282.7 Wh·kg-1. This work may promote more studies on PBA electrodes and accelerate the development of KIBs.

Prevalence and Demographic Correlates of Poor Sleep Quality Among Frontline Health Professionals in Liaoning Province, China During the COVID-19 Outbreak.

BACKGROUND: Little empirical evidence is known about the sleep quality of frontline health professionals working in isolation units or hospitals during the novel coronavirus disease (COVID-19) outbreak in China. This study thus aimed to examine the prevalence of poor sleep quality and its demographic and correlates among frontline health professionals. METHODS: This is a multicenter, cross-sectional survey conducted in Liaoning province, China. Sleep quality was measured by the Pittsburgh Sleep Quality Index (PSQI). RESULTS: A total of 1,931 frontline health professionals were recruited. The prevalence of poor sleep quality was 18.4% (95%CI: 16.6%-20.11%). Multivariate logistic regression analysis found that older age (OR=1.043, 95%CI=1.026-1.061, P < 0.001), being nurse (OR=3.132, 95%CI=1.727-5.681, P < 0.001), and working in outer emergency medical team (OR=1.755, 95%CI=1.029-3.064, P=0.039) were positively associated with poor sleep quality. Participants who were familiar with crisis response knowledge were negatively associated with poor sleep quality (OR=0.70, 95%CI=0.516-0.949, P=0.021). CONCLUSION: The prevalence of poor sleep quality was relatively low among frontline health professionals during the COVID-19 epidemic. Considering the negative impact of poor sleep quality on health professionals' health outcomes and patient outcomes, regularly screening and timely treatments are warranted to reduce the likelihood of poor sleep quality in health professionals.

LINC00511 promotes gastric cancer cell growth by acting as a ceRNA.

BACKGROUND: Gastric cancer (GC) is one of the most aggressive malignancies, with a high incidence and poor prognosis worldwide. Recently, accumulating evidence has illustrated that long noncoding RNAs (lncRNAs) play pivotal roles in many cancers. It has been reported that LINC00511 contributes to tumorigenesis in various diseases. However, the role of LINC00511 in GC cell growth remains mostly unknown. AIM: To determine whether the lncRNA LINC00511 exerted its carcinogenic function in GC via the miR-124-3p/PDK4 axis. METHODS: Cell culture and transfection, RNA extraction and quantitative real-time PCR, CCK-8 assay, Colony formation assay, Luciferase reporter assay, RIP assay, RNA pull-down assay, and Western blot analysis were used to show expression and mechanisms of LINC00511 in GC progression and apoptosis. Rescue assays were performed to verify the relationships among LINC00511, miR-124-3p and PDK4 further. RESULTS: The expression of LINC00511 was remarkably upregulated in GC cells compared to that in corresponding normal cell lines. Compared to the controls, cell proliferation was inhibited, and cell apoptosis was increased upon LINC00511 knockdown, demonstrating that LINC00511 influenced GC cell growth. An exploration of the molecular mechanism revealed that LINC00511 functioned as a molecular sponge of miR-124-3p and that PDK4 was a downstream target of miR-124-3p in GC. Rescue assays showed that the overexpression of PDK4 could partly restore the inhibitory function of si-LINC00511 in GC. CONCLUSION: These data demonstrate that LINC00511 promotes gastric cancer cell growth by acting as a ceRNA to regulate the miR-124-3p/PDK4 axis, which may be a promising therapeutic target for GC.