Synergy of Oxygen Vacancies and Base Sites for Transfer Hydrogenation of Nitroarenes on Ceria Nanorods.

CeO2 nanorod based catalysts for the base-free synthesis of azoxy-aromatics via transfer hydrogenation of nitroarenes with ethanol as hydrogen donor have been synthesized and investigated. The oxygen vacancies (Ov ) and base sites are critical for their excellent catalytic properties. The Ov , i.e., undercoordinated Ce cations, serve as the sites to activate ethanol and nitroarenes by lowering the energy barrier to transfer hydrogen from α-Csp3 -H in ethanol to the nitro group coupling it to the redox reactions between Ce3+ and Ce4+ . At the same time, the base sites catalyze the condensation step to selectively produce azoxy-aromatics. The catalytic route opens a much improved way to use non-noble metal oxides without additives for the selective functional group reduction and coupling reactions.

Silicalite-1 Layer Secures the Bifunctional Nature of a CO2 Hydrogenation Catalyst.

Close proximity usually shortens the travel distance of reaction intermediates, thus able to promote the catalytic performance of CO2 hydrogenation by a bifunctional catalyst, such as the widely reported In2O3/H-ZSM-5. However, nanoscale proximity (e.g., powder mixing, PM) more likely causes the fast deactivation of the catalyst, probably due to the migration of metals (e.g., In) that not only neutralizes the acid sites of zeolites but also leads to the reconstruction of the In2O3 surface, thus resulting in catalyst deactivation. Additionally, zeolite coking is another potential deactivation factor when dealing with this methanol-mediated CO2 hydrogenation process. Herein, we reported a facile approach to overcome these three challenges by coating a layer of silicalite-1 (S-1) shell outside a zeolite H-ZSM-5 crystal for the In2O3/H-ZSM-5-catalyzed CO2 hydrogenation. More specifically, the S-1 layer (1) restrains the migration of indium that preserved the acidity of H-ZSM-5 and at the same time (2) prevents the over-reduction of the In2O3 phase and (3) improves the catalyst lifetime by suppressing the aromatic cycle in a methanol-to-hydrocarbon conversion step. As such, the activity for the synthesis of C2 + hydrocarbons under nanoscale proximity (PM) was successfully obtained. Moreover, an enhanced performance was observed for the S-1-coated catalyst under microscale proximity (e.g., granule mixing, GM) in comparison to the S-1-coating-free counterpart. This work highlights an effective shielding strategy to secure the bifunctional nature of a CO2 hydrogenation catalyst.

A Ziegler-type spherical cap model reveals early stage ethylene polymerization growth versus catalyst fragmentation relationships.

Polyolefin catalysts are characterized by their hierarchically complex nature, which complicates studies on the interplay between the catalyst and formed polymer phases. Here, the missing link in the morphology gap between planar model systems and industrially relevant spherical catalyst particles is introduced through the use of a spherical cap Ziegler-type catalyst model system for the polymerization of ethylene. More specifically, a moisture-stable LaOCl framework with enhanced imaging contrast has been designed to support the TiCl4 pre-active site, which could mimic the behaviour of the highly hygroscopic and industrially used MgCl2 framework. As a function of polymerization time, the fragmentation behaviour of the LaOCl framework changed from a mixture of the shrinking core (i.e., peeling off small polyethylene fragments at the surface) and continuous bisection (i.e., internal cleavage of the framework) into dominantly a continuous bisection model, which is linked to the evolution of the estimated polyethylene volume and the fraction of crystalline polyethylene formed. The combination of the spherical cap model system and the used advanced micro-spectroscopy toolbox, opens the route for high-throughput screening of catalyst functions with industrially relevant morphologies on the nano-scale.

Tandem catalysis with double-shelled hollow spheres.

Metal-zeolite composites with metal (oxide) and acid sites are promising catalysts for integrating multiple reactions in tandem to produce a wide variety of wanted products without separating or purifying the intermediates. However, the conventional design of such materials often leads to uncontrolled and non-ideal spatial distributions of the metal inside/on the zeolites, limiting their catalytic performance. Here we demonstrate a simple strategy for synthesizing double-shelled, contiguous metal oxide@zeolite hollow spheres (denoted as MO@ZEO DSHSs) with controllable structural parameters and chemical compositions. This involves the self-assembly of zeolite nanocrystals onto the surface of metal ion-containing carbon spheres followed by calcination and zeolite growth steps. The step-by-step formation mechanism of the material is revealed using mainly in situ Raman spectroscopy and X-ray diffraction and ex situ electron microscopy. We demonstrate that it is due to this structure that an Fe2O3@H-ZSM-5 DSHSs-showcase catalyst exhibits superior performance compared with various conventionally structured Fe2O3-H-ZSM-5 catalysts in gasoline production by the Fischer-Tropsch synthesis. This work is expected to advance the rational synthesis and research of hierarchically hollow, core-shell, multifunctional catalyst materials.

Zeolite-Tailored Active Site Proximity for the Efficient Production of Pentanoic Biofuels.

Biofuel production can alleviate reliance on fossil resources and thus carbon dioxide emission. Hydrodeoxygenation (HDO) refers collectively to a series of important biorefinery processes to produce biofuels. Here, well-dispersed and ultra-small Ru metal nanoclusters (ca. 1 nm), confined within the micropores of zeolite Y, provide the required active site intimacy, which significantly boosts the chemoselectivity towards the production of pentanoic biofuels in the direct, one-pot HDO of neat ethyl levulinate. Crucial for improving catalyst stability is the addition of La, which upholds the confined proximity by preventing zeolite lattice deconstruction during catalysis. We have established and extended an understanding of the "intimacy criterion" in catalytic biomass valorization. These findings bring new understanding of HDO reactions over confined proximity sites, leading to potential application for pentanoic biofuels in biomass conversion.

Identifying key mononuclear Fe species for low-temperature methane oxidation.

The direct functionalization of methane into platform chemicals is arguably one of the holy grails in chemistry. The actual active sites for methane activation are intensively debated. By correlating a wide variety of characterization results with catalytic performance data we have been able to identify mononuclear Fe species as the active site in the Fe/ZSM-5 zeolites for the mild oxidation of methane with H2O2 at 50 °C. The 0.1% Fe/ZSM-5 catalyst with dominant mononuclear Fe species possess an excellent turnover rate (TOR) of 66 molMeOH molFe -1 h-1, approximately 4 times higher compared to the state-of-the-art dimer-containing Fe/ZSM-5 catalysts. Based on a series of advanced in situ spectroscopic studies and 1H- and 13C- nuclear magnetic resonance (NMR), we found that methane activation initially proceeds on the Fe site of mononuclear Fe species. With the aid of adjacent Brønsted acid sites (BAS), methane can be first oxidized to CH3OOH and CH3OH, and then subsequently converted into HOCH2OOH and consecutively into HCOOH. These findings will facilitate the search towards new metal-zeolite combinations for the activation of C-H bonds in various hydrocarbons, for light alkanes and beyond.

Role of the ionic environment in enhancing the activity of reacting molecules in zeolite pores.

Tailoring the molecular environment around catalytically active sites allows for the enhancement of catalytic reactivity through a hitherto unexplored pathway. In zeolites, the presence of water creates an ionic environment via the formation of hydrated hydronium ions and the negatively charged framework aluminum tetrahedra. The high density of cation-anion pairs determined by the aluminum concentration of a zeolite induces a high local ionic strength that increases the excess chemical potential of sorbed and uncharged organic reactants. Charged transition states (carbocations for example) are stabilized, which reduces the energy barrier and leads to higher reaction rates. Using the intramolecular dehydration of cyclohexanol on H-MFI zeolites in water, we quantitatively show an enhancement of the reaction rate by the presence of high ionic strength as well as show potential limitations of this strategy.

Antibacterial Activity and Mechanisms of Essential Oil from Citrus medica L. var. sarcodactylis.

In this work, antibacterial activity of finger citron essential oil (FCEO, Citrus medica L. var. sarcodactylis) and its mechanism against food-borne bacteria were evaluated. A total of 28 components in the oil were identified by gas chromatography-mass spectrometry, in which limonene (45.36%), γ-terpinene (21.23%), and dodecanoic acid (7.52%) were three main components. For in vitro antibacterial tests, FCEO exhibited moderately antibacterial activity against common food-borne bacteria: Escherichia coli, Staphylococcus aureus, Bacillus subtilis and Micrococcus luteus. It showed a better bactericidal effect on Gram-positive bacteria than Gram-negative. Mechanisms of the antibacterial action were investigated by observing changes of bacteria morphology according to scanning electron microscopy, time-kill analysis, and permeability of cell and membrane integrity. Morphology of tested bacteria was changed and damaged more seriously with increased concentration and exposure time of FCEO. FCEO showed a significant reduction effect on the growth rate of surviving bacteria and lead to lysis of the cell wall, intracellular ingredient leakage, and consequently, cell death.

Mechanism of Phenol Alkylation in Zeolite H-BEA Using In Situ Solid-State NMR Spectroscopy.

The reaction mechanism of solid-acid-catalyzed phenol alkylation with cyclohexanol and cyclohexene in the apolar solvent decalin has been studied using in situ 13C MAS NMR spectroscopy. Phenol alkylation with cyclohexanol sets in only after a majority of cyclohexanol is dehydrated to cyclohexene. As phenol and cyclohexanol show similar adsorption strength, this strict reaction sequence is not caused by the limited access of phenol to cyclohexanol, but is due to the absence of a reactive electrophile as long as a significant fraction of cyclohexanol is present. 13C isotope labeling demonstrates that the reactive electrophile, the cyclohexyl carbenium ion, is directly formed in a protonation step when cyclohexene is the coreactant. In the presence of cyclohexanol, its protonated dimers at Brønsted acid sites hinder the adsorption of cyclohexene and the formation of a carbenium ion. Thus, it is demonstrated that protonated cyclohexanol dimers dehydrate without the formation of a carbenium ion, which would otherwise have contributed to the alkylation in the kinetically relevant step. Isotope scrambling shows that intramolecular rearrangement of cyclohexyl phenyl ether does not significantly contribute to alkylation at the aromatic ring.

Enhancing the catalytic activity of hydronium ions through constrained environments.

The dehydration of alcohols is involved in many organic conversions but has to overcome high free-energy barriers in water. Here we demonstrate that hydronium ions confined in the nanopores of zeolite HBEA catalyse aqueous phase dehydration of cyclohexanol at a rate significantly higher than hydronium ions in water. This rate enhancement is not related to a shift in mechanism; for both cases, the dehydration of cyclohexanol occurs via an E1 mechanism with the cleavage of Cß-H bond being rate determining. The higher activity of hydronium ions in zeolites is caused by the enhanced association between the hydronium ion and the alcohol, as well as a higher intrinsic rate constant in the constrained environments compared with water. The higher rate constant is caused by a greater entropy of activation rather than a lower enthalpy of activation. These insights should allow us to understand and predict similar processes in confined spaces.

Advances in antitumor polysaccharides from phellinus sensu lato: Production, isolation, structure, antitumor activity, and mechanisms.

Edible and medicinal fungi (mushrooms) are widely applied to functional foods and nutraceutical products because of their proven nutritive and medicinal properties. Phellinus sensu lato is a well-known medicinal mushroom that has long been used in preventing ailments, including gastroenteric dysfunction, diarrhea, hemorrhage, and cancers, in oriental countries, particularly in China, Japan, and Korea. Polysaccharides represent a major class of bioactive molecules in Phellinus s. l., which have notable antitumor, immunomodulatory, and medicinal properties. Polysaccharides that were isolated from fruiting bodies, cultured mycelia, and filtrates of Phellinus s. l. have not only activated different immune responses of the host organism but have also directly suppressed tumor growth and metastasis. Studies suggest that polysaccharides from Phellinus s. l. are promising alternative anticancer agents or synergizers for existing antitumor drugs. This review summarizes the recent development of polysaccharides from Phellinus s. l., including polysaccharide production, extraction and isolation methods, chemical structure, antitumor activities, and mechanisms of action.

Green synthesis of biocompatible carboxylic curdlan-capped gold nanoparticles and its interaction with protein.

This study demonstrates a facile, green strategy for the preparation of gold nanoparticles (AuNPs) from chloroauric acid (HAuCl4) using carboxylic curdlan (Cc) as both reducing and stabilizing agent. The as-prepared AuNPs are characterized by UV-vis spectroscopy, high resolution transmission electron microscopy, X-ray diffraction, energy dispersive X-ray spectrometry and Fourier transform infrared spectroscopy. The results indicated that the particle size of the AuNPs changes with variations in the reaction time and concentrations of Cc and HAuCl4. The spherical AuNPs are well dispersed, exhibiting high stability even after six months storage. The carboxylic groups (COO(-)) in the Cc molecules tend to adsorb and stabilize the surface of the AuNPs. The interaction between BSA and the Cc-capped AuNPs was investigated using fluorescence and circular dichroism spectroscopies. The results indicated that the BSA molecules adsorb on the surface of the AuNPs, without significant change in its helical structure even after conjugation with the AuNPs.

Effects of Tween 80 and pH on mycelial pellets and exopolysaccharide production in liquid culture of a medicinal fungus.

This study investigated the effects of surfactant additives and medium pH on mycelial morphology and exopolysaccharide (EPS) production in liquid culture of a valuable medicinal fungus Cordyceps sinensis Cs-HK1. In the medium containing 20 g l⁻¹ glucose and 6 g l⁻¹ peptone as the sole nitrogen source, the Cs-HK1 fungal mycelia formed smooth and spherical pellets about 1.8-mm mean diameter. The mycelial pellets became less uniform at pH (4.0-5.0) lower than the optimum (pH 6.0) or turned to filamentous form at higher pH (8-9). Surfactants added to the medium inhibited pellet formation, resulting in smaller and looser pellets. Tween 80 exhibited a remarkable promoting effect on EPS production, increasing the EPS yield more than twofold at 1.5% (w/v), which was most probably attributed to the stimulation of EPS biosynthesis and release from the fungal cells by Tween 80.

Modeling of Fusarium redolens Dzf2 mycelial growth kinetics and optimal fed-batch fermentation for beauvericin production.

Beauvericin (BEA) is a cyclic hexadepsipeptide mycotoxin with notable phytotoxic and insecticidal activities. Fusarium redolens Dzf2 is a highly BEA-producing fungus isolated from a medicinal plant. The aim of the current study was to develop a simple and valid kinetic model for F. redolens Dzf2 mycelial growth and the optimal fed-batch operation for efficient BEA production. A modified Monod model with substrate (glucose) and product (BEA) inhibition was constructed based on the culture characteristics of F. redolens Dzf2 mycelia in a liquid medium. Model parameters were derived by simulation of the experimental data from batch culture. The model fitted closely with the experimental data over 20-50 g l(-1) glucose concentration range in batch fermentation. The kinetic model together with the stoichiometric relationships for biomass, substrate and product was applied to predict the optimal feeding scheme for fed-batch fermentation, leading to 54% higher BEA yield (299 mg l(-1)) than in the batch culture (194 mg l(-1)). The modified Monod model incorporating substrate and product inhibition was proven adequate for describing the growth kinetics of F. redolens Dzf2 mycelial culture at suitable but not excessive initial glucose levels in batch and fed-batch cultures.

Modeling of Xanthophyllomyces dendrorhous growth on glucose and overflow metabolism in batch and fed-batch cultures for astaxanthin production.

An astaxanthin-producing yeast Xanthophyllomyces dendrorhous ENM5 was cultivated in a liquid medium containing 50 g/L glucose as the major carbon source in stirred fermentors (1.5-L working volume) in fully aerobic conditions. Ethanol was produced during the exponential growth phase as a result of overflow metabolism or fermentative catabolism of glucose by yeast cells. After accumulating to a peak of 3.5 g/L, the ethanol was consumed by yeast cells as a carbon source when glucose in the culture was nearly exhausted. High initial glucose concentrations and ethanol accumulation in the culture had inhibitory effects on cell growth. Astaxanthin production was partially associated with cell growth. Based on these culture characteristics, we constructed a modified Monod kinetic model incorporating substrate (glucose) and product (ethanol) inhibition to describe the relationship of cell growth rate with glucose and ethanol concentrations. This kinetic model, coupled with the Luedeking-Piret equation for the astaxanthin production, gave satisfactory prediction of the biomass production, glucose consumption, ethanol formation and consumption, and astaxanthin production in batch cultures over 25-75 g/L glucose concentration ranges. The model was also applied to fed-batch cultures to predict the optimum feeding scheme (feeding glucose and corn steep liquor) for astaxanthin production, leading to a high volumetric yield (28.6 mg/L) and a high productivity (5.36 mg/L/day).

The signaling role of extracellular ATP and its dependence on Ca2+ flux in elicitation of Salvia miltiorrhiza hairy root cultures.

The application of a polysaccharide elicitor from yeast extract, YE, to Salvia miltiorrhiza hairy root cultures induced transient release of ATP from the roots to the medium, leading to a dose-dependent increase in the extracellular ATP (eATP) level. The eATP level rose to a peak (about 6.5 nM with 100 mg l(-1) YE) at about 10 h after YE treatment, but dropped to the control level 6 h later. The elicitor-induced ATP release was dependent on membrane Ca2+ influx, and abolished by the Ca2+ chelator EGTA or the channel blocker La3+. The YE-induced H2O2 production was strongly inhibited by reactive blue (RB), a specific inhibitor of membrane purinoceptors. On the other hand, the application of exogenous ATP at 10-100 microM to the cultures also induced rapid and dose-dependent increases in H2O2 production and medium pH, both of which were effectively blocked by RB and EGTA. The non-hydrolyzable ATP analog ATPgammaS was as effective as ATP, but the hydrolyzed derivatives ADP or AMP were not so effective in inducing the pH and H2O2 increases. Our results suggest that ATP release is an early event and that eATP plays a signaling role in the elicitation of plant cell responses; Ca2+ is required for activation of the elicitor-induced ATP release and the eATP signal transduction. This is the first report on ATP release induced by a fungal elicitor and its involvement in the elicitor-induced responses in plant cells.

Antibacterial phenolic compounds from the spines of Gleditsia sinensis Lam.

This study was to isolate antibacterial compounds from Gleditsia sinensis Lam. spines through bioassay-guided fractionation (against a Gram-positive bacterium Xanthomonas vesicatoria and a Gram-negative bacterium Bacillus subtilis). The crude ethanol extract of G. sinensis spines was partitioned sequentially with solvents of increasing polarity. The ethyl acetate fraction, which exhibited the most significant antibacterial activities among all the solvent fractions, was further separated by column chromatograph, yielding seven phenolic compounds including ethyl gallate (1) and caffeic acid (7), and five flavonoids, dihydrokaempferol (2), eriodictyol (3), quercetin (4), 3,3',5',5,7-pentahydroflavanone (5) and (-)-epicatechin (6). Compounds 4, 5 and 7 showed moderate inhibitory activities against both bacterial species, with compound 7 having the lowest minimal inhibitory concentration (MIC) of 0.125 mg mL(-1), while compounds 1 and 2 showed a weak inhibitory activity only against B. subtilis (MIC 1.00 mg mL(-1)), and compounds 3 and 6 showed insignificant activity against the two bacteria.