Nanostructured Implant-Tissue Interface Assessment Using a Three-Dimensional Gingival Tissue Equivalent.

Improved soft tissue integration (STI) around dental implants is key for implant success. The formation of an early and long-lasting transmucosal seal around the implant abutment might help to prevent peri-implantitis, one of the major causes of late implant failure. In natural teeth, collagen fibers are firmly inserted and fixed in the cementum of the tooth and emerge perpendicular to the gingival tissue. In contrast, around dental implants, collagen fibers run predominantly parallel to the implant surface, allowing bacterial migration into the peri-implant interface that might lead to peri-implantitis. Previous studies have shown that nanostructured Ti surfaces improve gingival cell response in monolayer cell cultures. Here, we aimed at evaluating the implant-tissue interface using a 3D gingival tissue equivalent (GTE). First, we evaluated the GTE response to a nanostructured (NN) and machined Ti surface after the stimulation with Porphyromonas gingivalis lipopolysaccharide (LPS), to simulate peri-implantitis conditions. Thus, GTE viability, through MTT assay, the release of metalloproteinase-1 (MMP1) and its inhibitor (TIMP1) through ELISA, and the gene expression of extracellular matrix turnover genes by real-time RT-PCR were analyzed. Second, GTE-implant interaction was characterized by serial block face scanning electron microscopy, and collagen-1 orientation at the tissue-implant interface was analyzed by immunofluorescence. While a similar GTE response to LPS stimulation was found for both implant surfaces, a higher proportion of collagen oriented perpendicular to the implant was observed on the NN implant surface. Thus, our results indicate that the nanostructuration of titanium dental implant abutments could allow the correct orientation of collagen fibers and greater soft tissue sealing, while keeping biocompatibility levels and LPS response comparable.

Comparative In Vitro Evaluation of Commercial Periodontal Gels on Antibacterial, Biocompatibility and Wound Healing Ability.

In the last years, several studies testing commercial periodontal gels that contain chlorhexidine (CHX) or other antibacterial agents, have raised concerns regarding their cytotoxicity in periodontal tissues. We aimed at comparing the biocompatibility but also the efficacy as regards to the antibacterial and wound healing ability of different commercial periodontal gels. In vitro human gingival fibroblasts (GF) and a 3D model of human tissue equivalents of gingiva (GTE) were used under inflammatory conditions to evaluate wound closure, cytotoxicity and gene expression. Antibacterial effects were also investigated on Porphyromonas gingivalis growth, viability and gingipain activity. In GF and in the bacterial study, we found cytotoxic effects on GF and a high inhibition on bacterial growth rate in gels containing CHX, asiaticoside, enoxolone, cetylpyridinium chloride, propolis and eugenol. Of the two gels that were non-cytotoxic, Syntoss Biogel (containing chondrontin sulfate) and Emdogain (EMD, containing amelogenin and propylene glycol alginate), EMD showed the best wound closure, with no effect on P. gingivalis growth but decreased gingipain activity. On the other hand, Syntoss Biogel reduced viability and gingipain activity of P. gingivalis, but lack wound healing capacity. In the 3D GTE, Syntoss Biogel and EMD showed a good biocompatibility. Among all the tested gels, formulations containing CHX, asiaticoside, enoxolone, cetylpyridinium chloride, propolis and eugenol showed high antibacterial effect but also showed high cytotoxicity in eukaryotic cells. EMD was the one with the best biocompatibility and wound healing ability at the conditions tested.

Multifunctional Properties of Quercitrin-Coated Porous Ti-6Al-4V Implants for Orthopaedic Applications Assessed In Vitro.

(1) One strategy to improve the outcome of orthopedic implants is to use porous implants with the addition of a coating with an antibacterial biomolecule. In this study, we aimed to produce and test the biocompatibility, the osteopromotive (both under normal conditions and under a bacterial challenge with lipopolysaccharide (LPS)) and antibacterial activities of a porous Ti-6Al-4V implant coated with the flavonoid quercitrin in vitro. (2) Porous Ti-6Al-4V implants were produced by 3D printing and further functionalized with quercitrin by wet chemistry. Implants were characterized in terms of porosity and mechanical testing, and the coating with quercitrin by fluorescence staining. Implant biocompatibility and bioactivity was tested using MC3T3-E1 preosteoblasts by analyzing cytotoxicity, cell adhesion, osteocalcin production, and alkaline phosphatase (ALP) activity under control and under bacterial challenging conditions using lipopolysaccharide (LPS). Finally, the antibacterial properties of the implants were studied using Staphylococcus epidermidis by measuring bacterial viability and adhesion. (3) Porous implants showed pore size of about 500 µm and a porosity of 52%. The coating was homogeneous over all the 3D surface and did not alter the mechanical properties of the Young modulus. Quercitrin-coated implants showed higher biocompatibility, cell adhesion, and osteocalcin production compared with control implants. Moreover, higher ALP activity was observed for the quercitrin group under both normal and bacterial challenging conditions. Finally, S. epidermidis live/dead ratio and adhesion after 4 h of incubation was lower on quercitrin implants compared with the control. (4) Quercitrin-functionalized porous Ti-6Al-4V implants present a great potential as an orthopedic porous implant that decreases bacterial adhesion and viability while promoting bone cell growth and differentiation.

Oriented Cell Alignment Induced by a Nanostructured Titanium Surface Enhances Expression of Cell Differentiation Markers.

A key factor for dental implant success is a good sealing between the implant surface and both soft (gum) and hard (bone) tissues. Surface nanotopography can modulate cell response through mechanotransduction. The main objective of this research was the development of nanostructured titanium (Ti) surfaces that promote both soft and hard tissue integration with potential application in dental implants. Nanostructured Ti surfaces were developed by electrochemical anodization-nanopores (NPs) and nanonets (NNs)-and characterized by atomic force microscopy, scanning electronic microscopy, and contact angle analysis. In addition, nanoparticle release and apoptosis activation were analyzed on cell culture. NP surfaces showed nanoparticle release, which increased in vitro cell apoptosis. Primary human gingival fibroblasts (hGFs) and human bone marrow mesenchymal stem cells (hBM-MSCs) were used to test cell adhesion, cytotoxicity, metabolic activity, and differentiation markers. Finally, cell orientation on the different surfaces was analyzed using a phalloidin staining. NN surfaces induced an oriented alignment of both cell types, leading in turn to an improved expression of differentiation markers. Our results suggest that NN structuration of Ti surfaces has great potential to be used for dental implant abutments to improve both soft and hard tissue integration.

Tuning Nanopore Diameter of Titanium Surfaces to Improve Human Gingival Fibroblast Response.

The aim of this study was to determine the optimal nanopore diameter of titanium nanostructured surfaces to improve human gingival fibroblast (hGF) response, with the purpose of promoting gingiva integration to dental implant abutments. Two TiO2 nanoporous groups with different diameters (NP-S ~48 nm and NP-B ~74 nm) were grown on Ti foils using an organic electrolyte containing fluoride by electrochemical oxidation, varying the applied voltage and the interelectrode spacing. The surfaces were characterized by scanning electron microscope (SEM), atomic force microscopy (AFM), and contact angle. The hGF were cultured onto the different surfaces, and metabolic activity, cytotoxicity, cell adhesion, and gene expression were analyzed. Bigger porous diameters (NP-B) were obtained by increasing the voltage used during anodization. To obtain the smallest diameter (NP-S), apart from lowering the voltage, a lower interelectrode spacing was needed. The greatest surface area and number of peaks was found for NP-B, despite these samples not being the roughest as defined by Ra. NP-B had a better cellular response compared to NP-S. However, these effects had a significant dependence on the cell donor. In conclusion, nanoporous groups with a diameter in the range of 74 nm induce a better hGF response, which may be beneficial for an effective soft tissue integration around the implant.