Use of biogas for cogeneration of heat and electricity for local application: performance evaluation of an engine power generator and a sludge thermal dryer.

A small unit of cogeneration of energy and heat was tested at the Centre for Research and Training on Sanitation UFMG/COPASA - CePTS, located at the Arrudas Sewage Treatment Plant, in Belo Horizonte, Minas Gerais, Brazil. The unit consisted of an engine power generator adapted to run on biogas, a thermal dryer prototype and other peripherals (compressor, biogas storage tank, air blower, etc.). The heat from engine power generator exhaust gases was directed towards the thermal dryer prototype to dry the sludge and disinfect it. The results showed that the experimental apparatus is self-sufficient in electricity, even producing a surplus, available for other uses. The tests of drying and disinfection of sludge lasted 7 h, leading to an increase in solids content from 4 to 8% (50% reduction in sludge volume). Although the drying of sludge was not possible (only thickening was achieved), the disinfection process proved very effective, enabling the complete inactivation of helminth eggs.

Estimates of methane loss and energy recovery potential in anaerobic reactors treating domestic wastewater.

This work aimed at developing a mathematical model that could estimate more precisely the fraction of chemical oxygen demand (COD) recovered as methane in the biogas and which, effectively, represented the potential for energy recovery in upflow anaerobic sludge blanket (UASB) reactors treating domestic wastewater. The model sought to include all routes of conversion and losses in the reactor, including the portion of COD used for the reduction of sulfates and the loss of methane in the residual gas and dissolved in the effluent. Results from the production of biogas in small- and large-scale UASB reactors were used to validate the model. The results showed that the model allowed a more realistic estimate of biogas production and of its energy potential.

Experience with the design and start up of two full-scale UASB plants in Brazil: enhancements and drawbacks.

This paper discusses the main drawbacks and enhancements experienced with the design and start up of two full-scale UASB plants in Brazil. The topics addressed are related to blockage of inlet pipes, scum accumulation, seed sludge for the start-up, corrosion and gas leakage, odour generation and sludge management. The paper describes the main improvements achieved.