RESUMO
Acetaldehyde, which is an intermediate product of alcohol metabolism, is known to induce symptoms, including alcohol flushing, vomiting, and headaches in humans. Therefore, real-time monitoring of acetaldehyde levels is crucial to mitigating these health issues. However, current methods for detecting low-concentration gases necessitate the use of complex measurement equipment. In this study, we developed a low-cost, low-detection-limit, enzyme-based electrochemical biosensor for acetaldehyde gas detection that does not require sophisticated equipment. The sensor was constructed by screen-printing electrodes onto a porous polyimide film, using grafted MgO-templated carbon (GMgOC) as working electrode material, carbon for the counter electrode, and silver/silver chloride for the reference electrode. Pyrroloquinoline-quinone-dependent aldehyde dehydrogenase was immobilized on the working electrode, and a chamber was attached to the electrode chip and filled with 1-methoxy-5-methylphenazinium methyl sulfate solution. The sensor can be used to measure acetaldehyde gas concentrations from 0.02 to 0.1 ppm, making it suitable for monitoring human skin gas. This low detection limit was achieved by delivering the analyte through the porous polyimide film on which the electrodes were printed and accumulating acetaldehyde in the mesoporous GMgOC of the working electrode. This mechanism suggests that this sensor design can be adapted to develop other low-detection limit gas sensors, such as those for screening skin gas biomarkers.
Assuntos
Técnicas Biossensoriais , Carbono , Humanos , Técnicas Biossensoriais/métodos , Acetaldeído , Porosidade , EletrodosRESUMO
Wearable ion sensors for the real-time monitoring of sweat biomarkers have recently attracted increasing research attention. Here, we fabricated a novel chloride ion sensor for real-time sweat monitoring. The printed sensor was heat-transferred onto nonwoven cloth, allowing for easy attachment to various types of clothing, including simple garments. Additionally, the cloth prevents contact between the skin and the sensor and acts as a flow path. The change in the electromotive force of the chloride ion sensor was -59.5 mTV/logâ¯CCl-. In addition, the sensor showed a good linear relationship with the concentration range of chloride ions in human sweat. Moreover, the sensor displayed a Nernst response, confirming no changes in the film composition due to heat transfer. Finally, the fabricated ion sensors were applied to the skin of a human volunteer subjected to an exercise test. In addition, a wireless transmitter was combined with the sensor to wirelessly monitor ions in sweat. The sensors showed significant responses to both sweat perspiration and exercise intensity. Thus, our research demonstrates the potential of using wearable ion sensors for the real-time monitoring of sweat biomarkers, which could significantly impact the development of personalized healthcare.
Assuntos
Suor , Dispositivos Eletrônicos Vestíveis , Humanos , Cloretos , Temperatura Alta , Biomarcadores , Impressão TridimensionalRESUMO
This study aimed to develop a lactate sensor with a microchannel that overcomes the issue of air bubbles interfering with the measurement of lactate levels in sweat and to evaluate its potential for continuous monitoring of lactate in sweat. To achieve continuous monitoring of lactate, a microchannel was used to supply and drain sweat from the electrodes of the lactate sensor. A lactate sensor was then developed with a microchannel that has an area specifically designed to trap air bubbles and prevent them from contacting the electrode. The sensor was evaluated by a person while exercising to test its effectiveness in monitoring lactate in sweat and its correlation with blood lactate levels. Furthermore, the lactate sensor with a microchannel in this study can be worn on the body for a long time and is expected to be used for the continuous monitoring of lactate in sweat. The developed lactate sensor with a microchannel effectively prevented air bubbles from interfering with the measurement of lactate levels in sweat. The sensor showed a concentration correlation ranging from 1 to 50 mM and demonstrated a correlation between lactate in sweat and blood. Additionally, the lactate sensor with a microchannel in this study can be worn on the body for an extended period and is expected to be useful for the continuous monitoring of lactate in sweat, particularly in the fields of medicine and sports.
Assuntos
Técnicas Biossensoriais , Ácido Láctico , Humanos , Suor , Microfluídica , EletrodosRESUMO
In this study, the performance of a paper-based, screen-printed biofuel cell with mesoporous MgO-templated carbon (MgOC) electrodes was improved in two steps. First, a small amount of carboxymethyl cellulose (CMC) was added to the MgOC ink. Next, the cathode was modified with bilirubin prior to immobilizing the bilirubin oxidase (BOD). The CMC increased the accessibility of the mesopores of the MgOC, and subsequently, the performance of both the bioanode and biocathode. CMC also likely increased the stability of the electrodes. The pre-modification with bilirubin improved the orientation of the BOD, which facilitated direct electron transfer. With these two steps, an open circuit potential of 0.65 V, a maximal current density of 1.94 mA cm-2, and a maximal power density of 465 µW cm-2 was achieved with lactate oxidase as bioanode enzyme and lactate as fuel. This is one of the highest reported performances for a biofuel cell.
Assuntos
Fontes de Energia Bioelétrica , Carbono , Bilirrubina , Eletrodos , Enzimas Imobilizadas , Glucose , Tinta , Oxirredutases atuantes sobre Doadores de Grupo CH-CHRESUMO
We developed a novel sticker device that can convert any metal or alloy into the working electrode of a three-electrode system, enabling simple and accurate measurement. The sticker, containing a counter electrode and a stable and accurate liquid junction-type reference electrode, is attached to the metal or alloy; meanwhile the surface exposed from a hole in the device functions as the working electrode. This sticker device was fabricated by screen-printing. The polarization curve of the copper and tin-plated copper measured using the sticker device exhibited approximately the same behavior as that obtained for the conventional three-electrode system. The characteristics of various materials can be easily evaluated using this system by only dropping a small amount of solution.
RESUMO
Glycated albumin (GA) is an important glycemic control marker for diabetes mellitus. This study aimed to develop a highly sensitive disposable enzyme sensor strip for GA measurement by using an interdigitated electrode (IDE) as an electrode platform. The superior characteristics of IDE were demonstrated using one microelectrode of the IDE pair as the working electrode (WE) and the other as the counter electrode, and by measuring ferrocyanide/ferricyanide redox couple. The oxidation current was immediately reached at the steady state when the oxidation potential was applied to the WE. Then, an IDE enzyme sensor strip for GA measurement was prepared. The measurement of fructosyl lysine, the protease digestion product of GA, exhibited a high, steady current immediately after potential application, revealing the highly reproducible measurement. The sensitivity (2.8 nA µM-1) and the limit of detection (1.2 µM) obtained with IDE enzyme sensor strip were superior compared with our previously reported sensor using screen printed electrode. Two GA samples, 15 or 30% GA, corresponding to healthy and diabetic levels, respectively, were measured after protease digestion with high resolution. This study demonstrated that the application of an IDE will realize the development of highly sensitive disposable-type amperometric enzyme sensors with high reproducibility.
Assuntos
Técnicas Biossensoriais/instrumentação , Equipamentos Descartáveis , Enzimas/metabolismo , Albumina Sérica/análise , Eletrodos , Produtos Finais de Glicação Avançada , Reprodutibilidade dos Testes , Albumina Sérica GlicadaRESUMO
Porous carbon electrodes have considerably improved the performance of biofuel cells and biosensors in recent years. In this paper, we propose a novel in-situ analysis method for porous enzyme electrodes. By combining three-dimensional (3D) impedance measurement and a double-channel transmission line model, the stability of porous enzyme electrodes during operation can be evaluated. The proposed method can distinguish between the functional stability of the enzyme and mediator reaction and the general structural stability of the electrode. We demonstrated this method by evaluating bilirubin oxidase-modified carbon cloth (CC) electrodes with and without a magnesium oxide (MgO)-templated carbon coating. In case of the CC electrode, a remarkable increase in the charge transfer resistance within the first 500 s indicated the elution of the enzyme and mediator. When the CC was coated with MgO-templated carbon before enzyme modification, the charge transfer resistance remained constant, indicating an effective suppression of the elution of the enzyme and mediator. The electric double-layer capacitance values of both electrodes indicated that their general electrode structures were stable during the analysis. Thus, the proposed analytical method, based on 3D impedance, can be a powerful tool for simultaneously detecting possible changes in the general electrode structure of enzyme electrodes and in the amount of active enzymes and mediators on the electrode surface.
Assuntos
Técnicas Biossensoriais , Carbono , Enzimas , Espectroscopia Dielétrica , Eletrodos , PorosidadeRESUMO
In this study, magnesium oxide (MgO)-templated mesoporous carbon (MgOC) and chitosan cross-linked with genipin (chitosan-genipin) were considered bio-composite inks for screen-printed bioanodes. The fabrication processes were optimized using rheological and structural data, and a bioanode ink containing glucose oxidase (GOx) and 1,2-naphthoquinone (1,2-NQ) was successfully developed. The optimal bioanode-ink contained MgOC pre-treated by washing to achieve a hydrophilic and neutral surface, which helped maintain enzyme activity and resulted in a highly porous electrode structure, which is essential for the accessibility of glucose to GOx. A bioanode fabricated using this ink showed a linear response current dependency up to 8 mM glucose with a sensitivity of 25.83 µA cm-2 mM-1. Combined with a conventional biocathode, an electromotive force of 0.54 V and a maximal power density of 96 µW cm-2 were achieved. These results show that this bio-composite ink can be used to replace the multi-step process of printing with conventional ink followed by drop-casting enzyme and mediator with a one-step printing process.
RESUMO
In this paper, a novel electron mediator, 1-methoxy-5-ethyl phenazinium ethyl sulfate (mPES), was introduced as a versatile mediator for disposable enzyme sensor strips, employing representative flavin oxidoreductases, lactate oxidase (LOx), glucose dehydrogenase (GDH), and fructosyl peptide oxidase (FPOx). A disposable lactate enzyme sensor with oxygen insensitive Aerococcus viridans-derived engineered LOx (AvLOx), with A96L mutant as the enzyme, was constructed. The constructed lactate sensor exhibited a high sensitivity (0.73 ± 0.12 µA/mM) and wide linear range (0-50 mM lactate), showings that mPES functions as an effective mediator for AvLOx. Employing mPES as mediator allowed this amperometric lactate sensor to be operated at a relatively low potential of +0.2 V to 0 V vs. Ag/AgCl, thus avoiding interference from uric acid and acetaminophen. The lactate sensors were adequately stable for at least 48 days of storage at 25 °C. These results indicated that mPES can be replaced with 1-methoxy-5-methyl phenazinium methyl sulfate (mPMS), which we previously reported as the best mediator for AvLOx-based lactate sensors. Furthermore, this study revealed that mPES can be used as an effective electron mediator for the enzyme sensors employing representative flavin oxidoreductases, GDH-based glucose sensors, and FPOx-based hemoglobin A1c (HbA1c) sensors.
Assuntos
Aerococcus/enzimologia , Aminoácido Oxirredutases/química , Técnicas Biossensoriais , Elétrons , Glucose Desidrogenase/química , Oxigenases de Função Mista/química , Ésteres do Ácido Sulfúrico/químicaRESUMO
Glucose oxidase (GOx) has been widely utilized for monitoring glycemic levels due to its availability, high activity, and specificity toward glucose. Among the three generations of electrochemical glucose sensor principles, direct electron transfer (DET)-based third-generation sensors are considered the ideal principle since the measurements can be carried out in the absence of a free redox mediator in the solution without the impact of oxygen and at a low enough potential for amperometric measurement to avoid the effect of electrochemically active interferences. However, natural GOx is not capable of DET. Therefore, a simple and rapid strategy to create DET-capable GOx is desired. In this study, we designed engineered GOx, which was made readily available for single-step modification with a redox mediator (phenazine ethosulfate, PES) on its surface via a lysine residue rationally introduced into the enzyme. Thus, PES-modified engineered GOx showed a quasi-DET response upon the addition of glucose. This strategy and the obtained results will contribute to the further development of quasi-DET GOx-based glucose monitoring dedicated to precise and accurate glycemic control for diabetic patient care.
Assuntos
Técnicas Biossensoriais/métodos , Glicemia/análise , Glucose Oxidase/metabolismo , Fenazinas/metabolismo , Engenharia de Proteínas , Aspergillus niger/enzimologia , Técnicas Eletroquímicas , Proteínas Fúngicas/metabolismo , Glucose/metabolismo , Glucose Oxidase/genéticaRESUMO
Faradaic electrochemical impedance spectroscopy (faradaic EIS) is an attractive measurement principle for biosensors. However, there have been no reports on sensors employing direct electron transfer (DET)-type redox enzymes based on faradaic EIS principle. In this study, we have attempted to construct the 3rd-generation faradaic enzyme EIS sensor, which used DET-type flavin adenine dinucleotide (FAD) dependent glucose dehydrogenase (GDH) complex, to elucidate its characteristic properties as well as to investigate its potential application as the future immunosensor platform. The gold disk electrodes (GDEs) with DET-type FADGDH prepared using self-assembled monolayer (SAM) showed the glucose concentration dependent impedance change, which was confirmed by the change in the charge transfer resistance (Rct). The Δ(1/Rct) values were also affected by DC bias potential and the length of SAM. Based on the Nyquist plot and Bode plot simulations, glucose sensing by imaginary impedance monitoring under fixed frequency (5 mHz) was carried out, revealing the higher sensitivity at low glucose concentration with wider linear range (0.02-0.2â¯mM). Considering this high sensitivity toward glucose, the 3rd-generation faradaic enzyme EIS sensor would provide alternative platform for future impedimetric immunosensing system, which does not use redox probe.
Assuntos
Técnicas Biossensoriais/métodos , Glucose 1-Desidrogenase/química , Glucose/análise , Bactérias/enzimologia , Impedância Elétrica , Eletrodos , Transporte de Elétrons , Flavina-Adenina Dinucleotídeo/química , Ouro/químicaRESUMO
Continuous glucose monitoring (CGM) systems are most important in the current Type I diabetes care and as component for the development of artificial pancreas systems because the amount of insulin being supplied is calculated based on the CGM results. Therefore, to stably and accurately control the blood glucose level, CGM should be stable and accurate for a long period. We have been engaged in the biomolecular engineering and application of FAD dependent glucose dehydrogenase complex (FADGDH) which is capable of direct electron transfer. In this study, we report the development of the third-generation type open circuit potential (OCP) principle-based glucose sensor with direct electron transfer FADGDH immobilized on gold electrodes using a self-assembled monolayer (SAM). We developed a novel algorithm for OCP-based glucose sensors. By employing this new algorithm, high reproducibility of measurement and sensor preparation were achieved. In addition, the signal was not affected by the presence of acetaminophen and ascorbic acid in the sample solution. The thus optimized third-generation OCP-based glucose sensor could be operated continuously for more than 9 days without significant change in the signal, sensitivity and dynamic range, indicating its potential application for CGM systems.
Assuntos
Técnicas Biossensoriais , Automonitorização da Glicemia/métodos , Diabetes Mellitus/sangue , Glucose/isolamento & purificação , Glicemia/química , Diabetes Mellitus/patologia , Flavina-Adenina Dinucleotídeo/química , Glucose/química , Glucose 1-Desidrogenase/química , Humanos , Insulina/química , Insulina/metabolismoRESUMO
Fungal FAD-dependent glucose dehydrogenases (FADGDHs) are considered to be superior enzymes for glucose sensor strips because of their insensitivity to oxygen and maltose. One highly desirable mediator for enzyme sensor strips is hexaammineruthenium(III) chloride because of its low redox potential and high storage stability. However, in contrast to glucose oxidase (GOx), fungal FADGDH cannot utilize hexaammineruthenium(III) as electron acceptor. Based on strategic structure comparison between FADGDH and GOx, we constructed a mutant of Aspergillus flavus-derived FADGDH, capable of utilizing hexaammineruthenium(III) as electron acceptor: AfGDH-H403D. In AfGDH-H403D, a negative charge introduced at the pathway-entrance leading to the FAD attracts the positively charged hexaammineruthenium(III) and guides it into the pathway. The corresponding amino acid in wild-type GOx is negatively charged, which explains the ability of GOx to utilize hexaammineruthenium(III) as electron acceptor. Electrochemical measurements showed a response current of 46.0⯵A for 10â¯mM glucose with AfGDH-H403D and hexaammineruthenium(III), similar to that with wild-type AfGDH and ferricyanide (47.8⯵A). Therefore, AfGDH-H403D is suitable for constructing enzyme electrode strips with hexaammineruthenium(III) chloride as sole mediator. Utilization of this new, improved fungal FADGDH should lead to the development of sensor strips for blood glucose monitoring with increased accuracy and less stringent packing requirements.
Assuntos
Aspergillus flavus/enzimologia , Flavina-Adenina Dinucleotídeo/metabolismo , Glucose 1-Desidrogenase/metabolismo , Compostos de Rutênio/metabolismo , Substituição de Aminoácidos , Aspergillus flavus/genética , Aspergillus flavus/metabolismo , Técnicas Eletroquímicas , Elétrons , Glucose 1-Desidrogenase/genética , Modelos Moleculares , Engenharia de ProteínasRESUMO
Enzyme based electrochemical biosensors are divided into three generations according to their type of electron transfer from the cofactors of the enzymes to the electrodes. Although the 3rd generation sensors using direct electron transfer (DET) type enzymes are ideal, the number of enzyme types which possess DET ability is limited. In this study, we report of a glucose sensor using mediator-modified glucose dehydrogenase (GDH), that was fabricated by a new quick-and-easy method using the pre-functionalized amine reactive phenazine ethosulfate (arPES). Thus mediator-modified GDH obtained the ability to transfer electrons to bulky electron acceptors as well as electrodes. The concentration of glucose was successfully measured using electrodes with immobilized PES-modified GDH, without addition of external electron mediators. Therefore, continuous monitoring systems can be developed based on this "2.5th generation" electron transfer principle utilizing quasi-DET. Furthermore, we successfully modified two other diagnostically relevant enzymes, glucoside 3-dehydrogenase and lactate oxidase, with PES. Therefore, various kinds of diagnostic enzymes can achieve quasi-DET ability simply by modification with arPES, suggesting that continuous monitoring systems based on the 2.5th generation principle can be developed for various target molecules.
Assuntos
Técnicas Biossensoriais/métodos , Botrytis/enzimologia , Enzimas Imobilizadas/química , Glucose 1-Desidrogenase/química , Glucose/análise , Aerococcus/enzimologia , Agrobacterium tumefaciens/enzimologia , Glicemia/análise , Transporte de Elétrons , Glucose Desidrogenase/química , Humanos , Oxigenases de Função Mista/química , Fenazinas/química , Proteínas Recombinantes/químicaRESUMO
Continuous glucose monitoring (CGM) is a vital technology for diabetes patients by providing tight glycemic control. Currently, many commercially available CGM sensors use glucose oxidase (GOD) as sensor element, but this enzyme is not able to transfer electrons directly to the electrode without oxygen or an electronic mediator. We previously reported a mutated FAD dependent glucose dehydrogenase complex (FADGDH) capable of direct electron transfer (DET) via an electron transfer subunit without involving oxygen or a mediator. In this study, we investigated the electrochemical response of DET by controlling the immobilization of DET-FADGDH using 3 types of self-assembled monolayers (SAMs) with varying lengths. With the employment of DET-FADGDH and SAM, high current densities were achieved without being affected by interfering substances such as acetaminophen and ascorbic acid. Additionally, the current generated from DET-FADGDH electrodes decreased with increasing length of SAM, suggesting that the DET ability can be affected by the distance between the enzyme and the electrode. These results indicate the feasibility of controlling the immobilization state of the enzymes on the electrode surface.
Assuntos
Técnicas Biossensoriais/métodos , Burkholderia cepacia/enzimologia , Flavina-Adenina Dinucleotídeo/metabolismo , Glucose 1-Desidrogenase/metabolismo , Glucose/análise , Glicemia/análise , Glicemia/metabolismo , Técnicas Eletroquímicas/métodos , Transporte de Elétrons , Enzimas Imobilizadas/metabolismo , Glucose/metabolismo , HumanosRESUMO
Most commercially available electrochemical enzyme sensor strips for the measurement of blood glucose use an artificial electron mediator to transfer electrons from the active side of the enzyme to the electrode. One mediator recently gaining attention for commercial sensor strips is hexaammineruthenium(III) chloride. In this study, we investigate and compare the preference of enzyme electrodes with two different FAD-dependent glucose dehydrogenases (FADGDHs) for the mediators hexaammineruthenium(III) chloride, potassium ferricyanide (the most common mediator in commercial sensor strips), and methoxy phenazine methosulfate (mPMS). One FADGDH is a monomeric fungal enzyme, and the other a hetero-trimeric bacterial enzyme. With the latter, which contains a heme-subunit facilitating the electron transfer, similar response currents are obtained with hexaammineruthenium(III), ferricyanide, and mPMS (6.8 µA, 7.5 µA, and 6.4 µA, respectively, for 10 mM glucose). With the fungal FADGDH, similar response currents are obtained with the negatively charged ferricyanide and the uncharged mPMS (5.9 µA and 6.7 µA, respectively, for 10 mM glucose), however, no response current is obtained with hexaammineruthenium(III), which has a strong positive charge. These results show that access of even very small mediators with strong charges to a buried active center can be almost completely blocked by the protein.
Assuntos
Glucose/análise , Técnicas Biossensoriais , Flavina-Adenina Dinucleotídeo , Glucose DesidrogenaseRESUMO
Glycated proteins, such as glycated hemoglobin (HbA1c) or glycated albumin (GA) in the blood, are essential indicators of glycemic control for diabetes mellitus. Since GA, compared to HbA1c, is more sensitive to short term changes in glycemic levels, GA is expected to be used as an alternative or together with HbA1c as a surrogate marker indicator for glycemic control. In this paper we report the development of a sensing system for measuring GA by combining an enzyme analysis method, which is already used in clinical practice, with electrochemical principles. We used fructosyl amino acid oxidase, hexaammineruthenium(III) chloride as the electron mediator, and an inexpensive and economically attractive screen-printed carbon electrode. We used chronoamperometry to measure protease-digested GA samples. The developed sensor strips were able to measure protease-digested samples containing GA in very small sample volumes (1.3µL) within about 1min. We also prepared enzyme sensor strips suitable for clinical use in which the enzyme and the mediator were deposited and dried on. This sensor system showed a clear correlation between the GA concentration and the resulting current. The strips were stable following 3 months of storage at 37°C. We conclude that this disposable enzyme sensor strip system for measuring GA is suitable for point-of-care test (POCT) applications.
Assuntos
Técnicas Biossensoriais/instrumentação , Sistemas Automatizados de Assistência Junto ao Leito , Fitas Reagentes/análise , Albumina Sérica/análise , Aminoácido Oxirredutases/química , Carbono/química , Eletrodos , Desenho de Equipamento , Produtos Finais de Glicação Avançada , Humanos , Limite de Detecção , Albumina Sérica GlicadaRESUMO
An ultimate goal for those engaged in research to develop implantable medical devices is to develop mechatronic implantable artificial organs such as artificial pancreas. Such devices would comprise at least a sensor module, an actuator module, and a controller module. For the development of optimal mechatronic implantable artificial organs, these modules should be self-powered and autonomously operated. In this study, we aimed to develop a microcontroller using the BioCapacitor principle. A direct electron transfer type glucose dehydrogenase was immobilized onto mesoporous carbon, and then deposited on the surface of a miniaturized Au electrode (7mm2) to prepare a miniaturized enzyme anode. The enzyme fuel cell was connected with a 100 µF capacitor and a power boost converter as a charge pump. The voltage of the enzyme fuel cell was increased in a stepwise manner by the charge pump from 330mV to 3.1V, and the generated electricity was charged into a 100µF capacitor. The charge pump circuit was connected to an ultra-low-power microcontroller. Thus prepared BioCapacitor based circuit was able to operate an ultra-low-power microcontroller continuously, by running a program for 17h that turned on an LED every 60s. Our success in operating a microcontroller using glucose as the sole energy source indicated the probability of realizing implantable self-powered autonomously operated artificial organs, such as artificial pancreas.
Assuntos
Órgãos Artificiais , Técnicas Biossensoriais , Glucose 1-Desidrogenase/química , Glucose/química , Fontes de Energia Bioelétrica , Eletrodos , HumanosRESUMO
In this study, a novel fungus FAD dependent glucose dehydrogenase, derived from Aspergillus niger (AnGDH), was characterized. This enzyme's potential for the use as the enzyme for blood glucose monitor enzyme sensor strips was evaluated, especially by investigating the effect of the presence of xylose during glucose measurements. The substrate specificity of AnGDH towards glucose was investigated, and only xylose was found as a competing substrate. The specific catalytic efficiency for xylose compared to glucose was 1.8%. The specific activity of AnGDH for xylose at 5mM concentration compared to glucose was 3.5%. No other sugars were used as substrate by this enzyme. The superior substrate specificity of AnGDH was also demonstrated in the performance of enzyme sensor strips. The impact of spiking xylose in a sample with physiological glucose concentrations on the sensor signals was investigated, and it was found that enzyme sensor strips using AnGDH were not affected at all by 5mM (75mg/dL) xylose. This is the first report of an enzyme sensor strip using a fungus derived FADGDH, which did not show any positive bias at a therapeutic level xylose concentration on the signal for a glucose sample. This clearly indicates the superiority of AnGDH over other conventionally used fungi derived FADGDHs in the application for SMBG sensor strips. The negligible activity of AnGDH towards xylose was also explained on the basis of a 3D structural model, which was compared to the 3D structures of A. flavus derived FADGDH and of two glucose oxidases.
Assuntos
Aspergillus niger/enzimologia , Técnicas Biossensoriais/métodos , Flavina-Adenina Dinucleotídeo/metabolismo , Glucose Desidrogenase/metabolismo , Glucose/análise , Aspergillus niger/química , Aspergillus niger/metabolismo , Glucose/metabolismo , Glucose Desidrogenase/química , Humanos , Modelos Moleculares , Especificidade por Substrato , Xilose/metabolismoRESUMO
In this contribution the substitution of the central protoporphyrin IX iron complex of horseradish peroxidase by the respective osmium porphyrin complex is described. The direct electrochemical reduction of the Os containing horseradish peroxidase (OsHRP) was achieved at ITO and modified glassy carbon electrodes and in combination with spectroscopy revealed the three redox couples Os(III)HRP/Os(IV)HRP, Os(IV)HRP/Os(V)HRP and Os(V)HRP/Os(VI)HRP. The midpoint potentials differ dependent on the electrode material used with E(1/2) (Os(III/IV)) of -0.4 V (ITO) and -0.25 V (GC), E(1/2) (Os(IV)/(V)) of -0.16 V (ITO) and +0.10 V (GC), and E(1/2) (Os(V/VI))of +0.18 V (ITO), respectively. Moreover, with immobilised OsHRP the direct electrocatalytic reduction of hydrogen peroxide and tert-butyl hydroperoxide was observed. In comparison to electrodes modified with native HRP the sensitivity of the OsHRP-electrode for tert-butyl hydroperoxide is higher.