Utilisation of waste Cu-, Mn- and Fe-loaded zeolites generated after wastewater treatment as catalysts for air treatment.

Disposal of copper, manganese and iron is particularly problematic in wastewater of metallurgical and galvanization plants, the electronics industry and agriculture. On the other hand, volatile organic compounds (VOCs), emitted from industrial processes, transportation and consumer products are the main class of air pollutants. The study revealed the potential of waste metal-loaded zeolite, generated through wastewater treatment procedures, to be utilised as an effective VOC removal catalyst for air treatment. In the first step, we have evaluated the sorption performance of natural zeolite clinoptilolite (HEU type), and synthetic zeolite 4A (LTA type) for the simultaneous removal of Cu2+, Mn2+ and Fe3+ species from aqueous solution. By a detailed sorption study, we determined the optimum sorption conditions and maximum metal concentrations in wastewater that can be after treatment disposed of in rivers or municipal plants. The efficiency of both zeolites for metal immobilization was demonstrated for concentrations up to 5 mg metals/1 g zeolite. These waste Cu-, Mn- and Fe-loaded zeolites were thermally treated at 540 °C before the second step, where we evaluated their catalytic performance in removing VOC. The thermally treated waste Cu-, Mn- and Fe-loaded natural zeolite clinoptilolite showed good catalytic performance in total toluene oxidation as a model VOC (conversion rate up to 96% at 510°C) and cycling stability (less than 15% drop in conversion rate in 4 h). In contrast, this is not the case for thermally treated waste Cu-, Mn- and Fe-loaded synthetic zeolite 4A.

Zeolite Nanocrystals Embedded in Microcellular Carbon Foam as a High-Performance CO2 Capture Adsorbent with Energy-Saving Regeneration Properties.

Here, the facile synthesis of four-length-scaled (ultramicro-micro-meso-macroporous) hierarchically structured porous carbon nanocomposite by an emulsion-template strategy is reported. This previously unreported combination of zeolite nanocrystals embedded in the walls of microcellular carbon foams gives unique textural and structural properties, which result in their excellent ability to selectively capture CO2 owing to the presence of ultra-micropores. The zeolite-microcellular carbon foam synergism delivers an adsorbent with a significantly enhanced CO2 capture capacity of up to 5 mmol g-1 , CO2 /N2 selectivity of up to 80, and an outstanding multi-cycle capture performance under humid conditions (70 % performance retention after 30 regeneration cycles). More impressively, the electrically conductive carbon framework enables Joule heating and cooling, and thus fast and energy-efficient regeneration is possible, with an estimated energy consumption of only about 12 kWh.

Synthesis and Catalytic Performance of Hierarchically Porous MIL-100(Fe)@polyHIPE Hybrid Membranes.

Metal-organic frameworks (MOFs) nanoparticles in combination with a nonionic surfactant (Pluronic L-121) are used to stabilize dicyclopentadiene (DCPD)-in-water high internal phase emulsions (HIPEs). The resulting HIPEs containing the MIL-100(Fe) nanoparticles (MIL: Materials of Institut Lavoisier) at the interface between the oil- and the water-phases are then cured, and 100 µm thick, fully open, hierarchically porous hybrid membranes are obtained. The properties of the MIL-100(Fe)@pDCPD polyHIPE membranes are characterized and it is found that up to 14 wt% of the MIL-100(Fe) nanoparticles are incorporated in the hybrid material resulting in an increase of the microporosity up to 130 m(2) g(-1). Hybrid membranes show an appealing catalytic activity in Friedel-Crafts alkylation in a batch mode as well as in a flow-through mode, thereby demonstrating the preserved accessibility of Lewis acidic sites in the MOF nanostructures.

A new layered Ca-succinate coordination polymer.

A new layered Ca-succinate coordination polymer, poly[µ(3)-succinato-calcium(II)], [Ca(C(4)H(5)O(4))](n), was synthesized by reaction of CaCl(2)·2H(2)O and succinic acid in an aqueous medium under hydrothermal microwave conditions. The structure contains infinite layers of edge-sharing calcium pentagonal-bipyramidal polyhedra forming six-membered rings connected through succinate ligands. Such an assembly of inorganic building units is unique for calcium metal-organic framework-type structures. Adjacent layers are packed into a final pseudo-three-dimensional structure through weak C-H···O hydrogen bonds.

MnO(x) nanoparticles supported on a new mesostructured silicate with textural porosity.

A two-step synthesis of a novel mesostructured silicate, KIL-2, and its manganese-containing analogue, Mn/KIL-2, has been developed. KIL-2 possesses interparticle mesopores with pore dimensions between 5 and 60 nm and a surface area of 448 m(2). The mesopores are formed by the aggregation of silica nanoparticles, which creates a network with interparticle voids. The particle size and the pore diameters depend on the temperature of the ageing step (first step) and on the solvothermal treatment in ethanol (second step), respectively. Mn/KIL-2 contains octahedrally coordinated Mn(3+) (80%) and tetrahedrally coordinated Mn(2+) (20%) ions. Mn(3+) ions are present in the extra-framework MnO(x) nanoparticles with typical dimensions of 2 nm, which are homogeneously distributed throughout the material. Mn(2+) ions occur as isolated manganese framework sites. The material is also able to retain its structure characteristics after the hydrothermal treatment in boiling water. Because of its non-toxic nature and cost-effective synthesis, Mn/KIL-2 thus exhibits properties that are needed for an environment-friendly catalyst.