Hydroxycinnamic acid derivatives for UV-selective and visibly transparent dye-sensitized solar cells.

Naturally abundant dyes are very attractive for the development of dye-sensitized solar cells (DSSCs). Hydroxycinnamic acid derivatives, such as caffeic acid (CA), ferulic acid (FA), and p-coumaric acid (PA), were considered for the selective harvesting of ultraviolet A (UVA) (315-400 nm) photons. Their spectroscopic and electrochemical properties were investigated both theoretically and experimentally. They were further successfully adopted as photosensitizers in UV-selective and visibly transparent DSSCs, which exhibited a power conversion efficiency of 0.22-0.38% under AM (air mass) 1.5G (global) illumination (100 mW/cm2) and 3.40-3.62% under UVA irradiation (365 nm, 115.22 mW/cm2), with a corresponding visible light transmittance (VLT) of 49.07-43.72% and a general color rendering index (Ra) of 93-90.

Combustion-Assisted Polyol Reduction Method to Prepare Highly Transparent and Efficient Pt Counter Electrodes for Bifacial Dye-Sensitized Solar Cells.

A combustion-assisted polyol reduction (CPR) method has been developed to deposit electrocatalytically efficient and transparent Pt counter electrodes (CEs) for bifacial dye-sensitized solar cells (DSSCs). Compared with conventional thermal decomposition of Pt precursors, CPR allows for a decrease in reduction temperature to 150 °C. The low-temperature processing is attributed to adding an organic fuel, acetylacetone (Hacac), which provides extra heat to lower reduction energy. In addition, the stable Pt complexes can simultaneously be formed in ethylene glycol (EG) and Hacac system, which leads to Pt nanoparticle size regulation. A ratio of Hacac to EG is optimized to achieve excellent electrocatalytic activity and high visible light transmittance for CEs. The bifacial DSSCs fabricated with CPR-Pt CEs (EG : Hacac=1 : 16) reach efficiencies of 6.71±0.16% and 6.41±0.15% in front and back irradiations, respectively.

Ferroelectric PVDF nanofiber membrane for high-efficiency PM0.3 air filtration with low air flow resistance.

The significant public health concerns related to particulate matter (PM) air pollutants and the airborne transmission of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) have led to considerable interest in high-performance air filtration membranes. Highly ferroelectric polyvinylidene fluoride (PVDF) nanofiber (NF) filter membranes are successfully fabricated via electrospinning for high-performance low-cost air filtration. Spectroscopic and ferro-/piezoelectric analyses of PVDF NF show that a thinner PVDF NF typically forms a ferroelectric ß phase with a confinement effect. A 70-nm PVDF NF membrane exhibits the highest fraction of ß phase (87%) and the largest polarization behavior from piezoresponse force microscopy. An ultrathin 70-nm PVDF NF membrane exhibits a high PM0.3 filtration efficiency of 97.40% with a low pressure drop of 51 Pa at an air flow of 5.3 cm/s owing to the synergetic combination of the slip effect and ferroelectric dipole interaction. Additionally, the 70-nm PVDF NF membrane shows excellent thermal and chemical stabilities with negligible filtration performance degradation (air filtration efficiency of 95.99% and 87.90% and pressure drop of 55 and 65 Pa, respectively) after 24 h of heating at 120 °C and 1 h immersion in isopropanol.

Transparent Platinum Counter Electrode Prepared by Polyol Reduction for Bifacial, Dye-Sensitized Solar Cells.

Pt catalytic nanoparticles on F-doped SnO2/glass substrates were prepared by polyol reduction below 200 °C. The polyol reduction resulted in better transparency of the counter electrode and high power-conversion efficiency (PCE) of the resultant dye-sensitized solar cells (DSSCs) compared to conventional thermal reduction. The PCEs of the DSSCs with 5 µm-thick TiO2 photoanodes were 6.55% and 5.01% under front and back illumination conditions, respectively. The back/front efficiency ratio is very promising for efficient bifacial DSSCs.

Five Years' Outcomes of Trabeculectomy with Cross-linked Sodium Hyaluronate Gel Implantation for Chinese Glaucoma Patients / 中华医学杂志(英文版)

<p><b>Background</b>Trabeculectomy is the most efficient surgical treatment. Prevention failure of bleb cicatrix would lead to unsatisfactory postoperative intraocular pressure (IOP) controlling and unsatisfactory success rate. The aim of this study was to evaluate the 5-year outcomes of trabeculectomy with a cross-linked sodium hyaluronate gel implantation for Chinese glaucoma patients.</p><p><b>Methods</b>This is a prospective, case-controlled study. Patients who were to be applied first-time trabeculectomy in the Department of Ophthalmology of Peking University Third Hospital between 2010 and 2012 were included in the study. Totally, 60 eyes were randomly assigned to the trabeculectomy group (TA group) or the trabeculectomy with cross-linked sodium hyaluronate gel implantation group (TH group). Follow-up was finished at 1 week, 1 month, 3 months, 1 year, 3 years, and 5 years after the operation. The statistical index of demographic data, IOP, bleb shape, and any complications or medications or surgical procedures were recorded and assessed by SPSS 19.0 software through independent t-test, one-way analysis of variance (ANOVA) and Pearson's Chi-square test, respectively.</p><p><b>Results</b>The baseline IOP was comparable between the two groups (t= -1.00, P= 0.32) while the postoperative IOP was significantly lower in the TH group at 1, 3 and 5 years' time points (P = 0.00, P= 0.01 and P = 0.01, respectively). According to the Indiana Bleb Appearance Grading Scale, the height and extent of bleb were better in the TH group at all follow-up time points (P < 0.05), however, the comparison of bleb vascularity showed no statistical difference (P > 0.05). TA group had a higher percentage of complications (13% vs. 3%) compared to TH group; however, there was no statistical difference in the comparison of each statistical item (P > 0.05, respectively). The complete success at 5 years was higher in the TH group than that in the TA group (78% vs. 54%, P = 0.03).</p><p><b>Conclusion</b>Our results suggested that implantation of cross-linked sodium hyaluronate gel with trabeculectomy was more efficient and would improve the prognosis of glaucoma patients.</p>

Safety and Efficiency of Trabectome-mediated Trabecular Meshwork Ablation for Chinese Glaucoma Patients: A Two-year, Retrospective, Multicentre Study / 中华医学杂志(英文版)

<p><b>Background</b>The aim of the study was to evaluate the long-term safety and efficacy of the Trabectome for Chinese glaucoma patients.</p><p><b>Methods</b>This was a multicenter, retrospective, observational study. Glaucoma patients, except those with neovascular glaucoma, with/without a visually significant cataract were enrolled. The patients received Trabectome or a combined surgery with phacoemulsification and intraocular lens implantation. The primary outcome evaluation was a reduction in intraocular pressure (IOP), and the secondary outcomes were a reduction in glaucoma medication, the 2-year success percentages, and complications. Success was defined as an IOP <21 mmHg and at least a 20% IOP reduction from baseline after 3 months for any two consecutive visits, without additional glaucoma surgery. The data were processed using the R Stats Package version 3.0.0. The Wilcoxon test was used to compare the postoperative IOP and the number of glaucoma medications with baselines. The Kaplan-Meier test was used to calculate the 2-year success percentage. The risk factors related to Trabectome failure were determined by logistic regression.</p><p><b>Results</b>A total of 120 glaucoma patients were enrolled. The Trabectome efficiently reduced the IOP from a baseline of 22.8 ± 1.34 mmHg to 17.6 ± 0.96 mmHg, and the use of glaucoma medications from 2.2 ± 0.17 mmHg to 1.4 ± 0.21 in a 2-year follow-up (both, P < 0.01). The overall success percentage was 80%. No risk factor related to Trabectome failure was identified. No vision-threatening complication was observed. Ten patients, who required secondary glaucoma surgery, all reached the target IOP.</p><p><b>Conclusions</b>In a 2-year follow-up, Trabectome was an efficient and safe procedure for Chinese glaucoma patients.</p>

Manganese Oxide Nanoparticle as a New p-Type Dopant for High-Performance Polymer Field-Effect Transistors.

We report a new p-type dopant, manganese oxide (Mn3O4) nanoparticle, to enhance the performance of organic field-effect transistors (OFETs) with conjugated polymers, including poly(3-hexylthiophene-2,5-diyl), poly[[N,N 9-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,59-(2,29-bithiophene)], and poly[[2,5-bis(2-octyldodecyl)-2,3,5,6-tetrahydro-3,6-dioxopyrrolo[3,4-c]pyrrole-1,4-diyl]-alt-[[2,2'-(2,5-thiophene)bis-thieno(3,2b) thiophene]-5,5'-diyl]] (DPPT-TT). Incorporating a small amount of Mn3O4 nanoparticles in the semiconductor film significantly improved the hole mobility and decreased the threshold voltage for all OFETs, indicating efficient Mn3O4 nanoparticle p-type doping. The Mn3O4 nanoparticle showed a better doping efficiency than the widely used FeCl3 dopant due to better mixability with the host conjugated polymers. In particular, doped DPPT-TT OFETs showed significantly improved mobility up to 2.35 (±0.4) cm2/(V·s) with enhanced air and operational stability at 0.1 wt % doping concentration from 1.2 cm2/(V·s) for pristine devices.

Participation of Pharmacist in the Analysis and Handle of Hypoglycemia Induced by Octreotid / 中国药学杂志

OBJECTIVE: To share the process of analysis and intervene the adverse drug reaction (ADR) caused by octreotide, and to provide reference for the work mode of clinical pharmacist. METHODS: One case of hypoglycemia possibly caused by octreotide was discovered. The clinical pharmacist recommend the doctor to replace octreotide as somatostatin after a review of the relevant information and literatures. Then the clinical pharmacist investigated awareness of hypoglycemia ADR of octreotide among the ICU doctors, and introduced the ADR of octreotide and the difference between octreotide and somatostatin among them. RESULTS: After the intervention, the hypoglycemia was corrected and the patient was cured and clinical pharmacists' working mode was identified. CONCLUSION: Clinically, pharmacists should not only have good professional knowledge, but also master the ways and means of communication, in addition to assisting doctors monitoring of adverse drug reactions, also need to continue to explore the work mode.

An improvement of performance in n-channel organic field effect transistors with N-phenyl[60]fulleropyrrolidines by molecular doping.

The high performance of soluble [60]fulleropyrrolidine upon its use as the active layer of n-channel organic field-effect transistors (OFETs) is reported. The two materials, N-phenyl derivatives C60-fused-N-phenyl-2-phenylpyrrolidine ([C60]PhNPh) and C60-fused N-phenyl-2-hexylpyrrolidine ([C60]HexNPh), have well-controlled molecular structures with a modification of the pyrrolidine ring, with no increase in the LUMO level, achieving a high mobility and highly ambient stable n-type OFET. The top-gate, bottom-contact device shows a high electron charge-carrier mobility of up to 0.14 and 0.08 cm(2) V(-1) s(-1) for [C60]PhNPh and [C60]HexNPh, respectively, (Ion/Ioff = 10(6)) with the commonly used CYTOP dielectric. Excess carriers introduced by a small amount of chemical doping of polyethyleneimine (PEI) compensate traps by shifting the Fermi level (EF) toward the respective transport energy levels and therefore increase charge-carrier mobility (0.26 and 0.1 cm(2) V(-1) s(-1)) and provide good ambient operational stability compared with pristine devices.

Universal diffusion-limited injection and the hook effect in organic thin-film transistors.

The general form of interfacial contact resistance was derived for organic thin-film transistors (OTFTs) covering various injection mechanisms. Devices with a broad range of materials for contacts, semiconductors, and dielectrics were investigated and the charge injections in staggered OTFTs was found to universally follow the proposed form in the diffusion-limited case, which is signified by the mobility-dependent injection at the metal-semiconductor interfaces. Hence, real ohmic contact can hardly ever be achieved in OTFTs with low carrier concentrations and mobility, and the injection mechanisms include thermionic emission, diffusion, and surface recombination. The non-ohmic injection in OTFTs is manifested by the generally observed hook shape of the output conductance as a function of the drain field. The combined theoretical and experimental results show that interfacial contact resistance generally decreases with carrier mobility, and the injection current is probably determined by the surface recombination rate, which can be promoted by bulk-doping, contact modifications with charge injection layers and dopant layers, and dielectric engineering with high-k dielectric materials.

STarMirDB: A database of microRNA binding sites.

microRNAs (miRNAs) are an abundant class of small endogenous non-coding RNAs (ncRNAs) of ∼22 nucleotides (nts) in length. These small regulatory molecules are involved in diverse developmental, physiological and pathological processes. miRNAs target mRNAs (mRNAs) for translational repression and/or mRNA degradation. Predictions of miRNA binding sites facilitate experimental validation of miRNA targets. Models developed with data from CLIP studies have been used for predictions of miRNA binding sites in the whole transcriptomes of human, mouse and worm. The prediction results have been assembled into STarMirDB, a new database of miRNA binding sites available at http://sfold.wadsworth.org/starmirDB.php . STarMirDB can be searched by miRNAs or mRNAs separately or in combination. The search results are categorized into seed and seedless sites in 3' UTR, CDS and 5' UTR. For each predicted site, STarMirDB provides a comprehensive list of sequence, thermodynamic and target structural features that are known to influence miRNA: target interaction. A high resolution PDF diagram of the conformation of the miRNA:target hybrid is also available for visualization and publication. The results of a database search are available through both an interactive viewer and downloadable text files.

Improved electron transport properties of n-type naphthalenediimide polymers through refined molecular ordering and orientation induced by processing solvents.

To determine the role played by the choice of processing solvents in governing the photophysics, microstructure, and charge carrier transport in naphthalenediimide (NDI)-based polymers, we have prepared two new NDI-bithiophene (T2)- and NDI-thienothiophene (TTh)-containing polymers with hybrid siloxane pentyl chains (SiC5) (P(NDI2SiC5-T2) and P(NDI2SiC5-TTh)). Among the various processing solvents studied here, the films prepared using chloroform exhibited far better electron mobilities (0.16 ± 0.1-0.21 ± 0.05 cm(2) V(-1) s(-1)) than the corresponding samples prepared from different solvents, exceeding one order of magnitude higher, indicating the significant influence of the processing solvent on the charge transport. Upon thin-film analysis using atomic force microscopy and grazing incidence X-ray diffraction, we discovered that molecular ordering and orientation are affected by the choice of the processing solvent, which is responsible for the change in the transport characteristics of this class of polymers.

Controlling charge injection properties in polymer field-effect transistors by incorporation of solution processed molybdenum trioxide.

A simply and facilely synthesized MoO3 solution was developed to fabricate charge injection layers for improving the charge-injection properties in p-type organic field-effect transistors (OFETs). By dissolving MoO3 powder in ammonium (NH3) solvent under an air atmosphere, an intermediate ammonium molybdate ((NH4)2MoO4) precursor is made stable, transparent and spin-coated to form the MoO3 interfacial layers, the thickness and morphology of which can be well-controlled. When the MoO3 layer was applied to OFETs with a cost-effective molybdenum (Mo) electrode, the field-effect mobility (µFET) was significantly improved to 0.17 or 1.85 cm(2) V(-1)s(-1) for polymer semiconductors, regioregular poly(3-hexylthiophene) (P3HT) or 3,6-bis-(5bromo-thiophen-2-yl)-N,N'-bis(2-octyl-1-dodecyl)-1,4-dioxo-pyrrolo[3,4-c]pyrrole (DPPT-TT), respectively. Device analysis indicates that the MoO3-deposited Mo contact exhibits a contact resistance RC of 1.2 MΩ cm comparable to that in a device with the noble Au electrode. Kelvin-probe measurements show that the work function of the Mo electrode did not exhibit a dependence on the thickness of MoO3 film. Instead, ultraviolet photoemission spectroscopy results show that a doping effect is probably induced by casting the MoO3 layer on the P3HT semiconductor, which leads to the improved hole injection.

STarMir: a web server for prediction of microRNA binding sites.

STarMir web server predicts microRNA (miRNA) binding sites on a target ribonucleic acid (RNA). STarMir is an implementation of logistic prediction models developed with miRNA binding data from crosslinking immunoprecipitation (CLIP) studies (Liu,C., Mallick, B., Long, D., Rennie, W.A., Wolenc, A., Carmack, C.S. and Ding, Y. (2013). CLIP-based prediction of mammalian microRNA binding sites. Nucleic Acids Res., 41(14), e138). In both intra-dataset and inter-dataset validations, the models showed major improvements over established algorithms in predictions of both seed and seedless sites. General applicability of the models was indicated by good performance in cross-species validations. The input data for STarMir is processed by the web server to perform prediction of miRNA binding sites, compute comprehensive sequence, thermodynamic and target structure features and a logistic probability as a measure of confidence for each predicted site. For each of seed and seedless sites and for all three regions of a mRNA (3' UTR, CDS and 5' UTR), STarMir output includes the computed binding site features, the logistic probability and a publication-quality diagram of the predicted miRNA:target hybrid. The prediction results are available through both an interactive viewer and downloadable text files. As an application module of the Sfold RNA package (http://sfold.wadsworth.org), STarMir is freely available to all at http://sfold.wadsworth.org/starmir.html.

MicroRNA binding sites in C. elegans 3' UTRs.

MicroRNAs (miRNAs) are post-transcriptional regulators of gene expression. Since the discovery of lin-4, the founding member of the miRNA family, over 360 miRNAs have been identified for Caenorhabditis elegans (C. elegans). Prediction and validation of targets are essential for elucidation of regulatory functions of these miRNAs. For C. elegans, crosslinking immunoprecipitation (CLIP) has been successfully performed for the identification of target mRNA sequences bound by Argonaute protein ALG-1. In addition, reliable annotation of the 3' untranslated regions (3' UTRs) as well as developmental stage-specific expression profiles for both miRNAs and 3' UTR isoforms are available. By utilizing these data, we developed statistical models and bioinformatics tools for both transcriptome-scale and developmental stage-specific predictions of miRNA binding sites in C. elegans 3' UTRs. In performance evaluation via cross validation on the ALG-1 CLIP data, the models were found to offer major improvements over established algorithms for predicting both seed sites and seedless sites. In particular, our top-ranked predictions have a substantially higher true positive rate, suggesting a much higher likelihood of positive experimental validation. A gene ontology analysis of stage-specific predictions suggests that miRNAs are involved in dynamic regulation of biological functions during C. elegans development. In particular, miRNAs preferentially target genes related to development, cell cycle, trafficking, and cell signaling processes. A database for both transcriptome-scale and stage-specific predictions and software for implementing the prediction models are available through the Sfold web server at http://sfold.wadsworth.org.

Development and characterization of genomic and expressed SSRs in citrus by genome-wide analysis.

Microsatellites or simple sequence repeats (SSRs) are one of the most popular sources of genetic markers and play a significant role in plant genetics and breeding. In this study, we identified citrus SSRs in the genome of Clementine mandarin and analyzed their frequency and distribution in different genomic regions. A total of 80,708 SSRs were detected in the genome with an overall density of 268 SSRs/Mb. While di-nucleotide repeats were the most frequent microsatellites in genomic DNA sequence, tetra-nucleotides, which had more repeat units than any other SSR types, had the highest cumulative sequence length. We identified 6,834 transcripts as containing 8,989 SSRs in 33,929 Clementine mandarin transcripts, among which, tri-nucleotide motifs (36.0%) were the most common, followed by di-nucleotide (26.9%) and hexa-nucleotide motifs (15.1%). The motif AG (16.7%) was most abundant among these SSRs, while motifs AAG (6.6%), AAT (5.0%), and TAG (2.2%) were most common among tri-nucleotides. Functional categorization of transcripts containing SSRs revealed that 5,879 (86.0%) of such transcripts had homology with known proteins, GO and KEGG annotation revealed that transcripts containing SSRs were those implicated in diverse biological processes in plants, including binding, development, transcription, and protein degradation. When 27 genomic and 78 randomly selected SSRs were tested on Clementine mandarin, 95 SSRs revealed polymorphism. These 95 SSRs were further deployed on 18 genotypes of the three generas of Rutaceae for the genetic diversity assessment, genomic SSRs generally show low transferability in comparison to SSRs developed from expressed sequences. These transcript-markers identified in our study may provide a valuable genetic and genomic tool for further genetic research and varietal development in citrus, such as diversity study, QTL mapping, molecular breeding, comparative mapping and other genetic analyses.

CLIP-based prediction of mammalian microRNA binding sites.

Prediction and validation of microRNA (miRNA) targets are essential for understanding functions of miRNAs in gene regulation. Crosslinking immunoprecipitation (CLIP) allows direct identification of a huge number of Argonaute-bound target sequences that contain miRNA binding sites. By analysing data from CLIP studies, we identified a comprehensive list of sequence, thermodynamic and target structure features that are essential for target binding by miRNAs in the 3' untranslated region (3' UTR), coding sequence (CDS) region and 5' untranslated region (5' UTR) of target messenger RNA (mRNA). The total energy of miRNA:target hybridization, a measure of target structural accessibility, is the only essential feature common for both seed and seedless sites in all three target regions. Furthermore, evolutionary conservation is an important discriminating feature for both seed and seedless sites. These features enabled us to develop novel statistical models for the predictions of both seed sites and broad classes of seedless sites. Through both intra-dataset validation and inter-dataset validation, our approach showed major improvements over established algorithms for predicting seed sites and a class of seedless sites. Furthermore, we observed good performance from cross-species validation, suggesting that our prediction framework can be valuable for broad application to other mammalian species and beyond. Transcriptome-wide binding site predictions enabled by our approach will greatly complement the available CLIP data, which only cover small fractions of transcriptomes and known miRNAs due to non-detectable levels of expression. Software and database tools based on the prediction models have been developed and are available through Sfold web server at http://sfold.wadsworth.org.

Spectrum-effect relationship of reducing phlegm effect of Peucedanum harrysmithii var. subglabrum / 中国中药杂志

<p><b>OBJECTIVE</b>To analyze the relationship between high-performance liquid chromatography (HPLC) fingerprints of the chloroform extract fractions of Peucedanum harrysmithii var. subglabrum (PHS) and its phlegm-reducing effect, in order to establish "active component group for reducing phlegm".</p><p><b>METHOD</b>HPLC was adopted to determine and analyze HPLC fingerprints of chloroform extract fractions of PHS. Phenol red expectorant experiment was used to observe the phlegm-reducing effect in mice. Mice were administered intragastrically with chloroform extract fractions for 6 days (1.4 g x kg(-1)), with acute bronchitis syrup as the positive control drug (12 mL x kg(-1)). The phenol red secretion in mice was determined by spectrophotometer. Then the grey relational analysis was used to study the spectrum-effect relationship.</p><p><b>RESULT</b>The phlegm-reducing effect of the chloroform extract fractions of PHS were resulted from the combined effect of all of its chemical components. Its various characteristic peaks represented different chemical components, and the order of their contributions to the phlegm-reducing effect was (number of peaks) 13 > 12 > 16 > 18 > 19 > 6 > 20 > 14 > 1 > 11 > 15 > 10 > 17 > 2 > 5 > 4 > 7 > 3 > 8 > 9, in No. 1, 3, 4, 10, 13 and 16 characteristic peaks were identified as marmesin, psoralen, xanthotoxin, Pd-Ib, pteryxin and peuformosin.</p><p><b>CONCLUSION</b>The chloroform extract fractions of PHS show strongly phlegm-reducing effect. There may be certain relationship between their HPLC fingerprint and phlegm-reducing effect.</p>

Dicer-1-dependent Dacapo suppression acts downstream of Insulin receptor in regulating cell division of Drosophila germline stem cells.

It is important to understand the regulation of stem cell division because defects in this process can cause altered tissue homeostasis or cancer. The cyclin-dependent kinase inhibitor Dacapo (Dap), a p21/p27 homolog, acts downstream of the microRNA (miRNA) pathway to regulate the cell cycle in Drosophila melanogaster germline stem cells (GSCs). Tissue-extrinsic signals, including insulin, also regulate cell division of GSCs. We report that intrinsic and extrinsic regulators intersect in GSC division control; the Insulin receptor (InR) pathway regulates Dap levels through miRNAs, thereby controlling GSC division. Using GFP-dap 3'UTR sensors in vivo, we show that in GSCs the dap 3'UTR is responsive to Dicer-1, an RNA endonuclease III required for miRNA processing. Furthermore, the dap 3'UTR can be directly targeted by miR-7, miR-278 and miR-309 in luciferase assays. Consistent with this, miR-278 and miR-7 mutant GSCs are partially defective in GSC division and show abnormal cell cycle marker expression, respectively. These data suggest that the GSC cell cycle is regulated via the dap 3'UTR by multiple miRNAs. Furthermore, the GFP-dap 3'UTR sensors respond to InR but not to TGF-beta signaling, suggesting that InR signaling utilizes Dap for GSC cell cycle regulation. We further demonstrate that the miRNA-based Dap regulation may act downstream of InR signaling; Dcr-1 and Dap are required for nutrition-dependent cell cycle regulation in GSCs and reduction of dap partially rescues the cell cycle defect of InR-deficient GSCs. These data suggest that miRNA- and Dap-based cell cycle regulation in GSCs can be controlled by InR signaling.

A structural interpretation of the effect of GC-content on efficiency of RNA interference.

BACKGROUND: RNA interference (RNAi) mediated by small interfering RNAs (siRNAs) or short hairpin RNAs (shRNAs) has become a powerful technique for eukaryotic gene knockdown. siRNA GC-content negatively correlates with RNAi efficiency, and it is of interest to have a convincing mechanistic interpretation of this observation. We here examine this issue by considering the secondary structures for both the target messenger RNA (mRNA) and the siRNA guide strand. RESULTS: By analyzing a unique homogeneous data set of 101 shRNAs targeted to 100 endogenous human genes, we find that: 1) target site accessibility is more important than GC-content for efficient RNAi; 2) there is an appreciable negative correlation between GC-content and RNAi activity; 3) for the predicted structure of the siRNA guide strand, there is a lack of correlation between RNAi activity and either the stability or the number of free dangling nucleotides at an end of the structure; 4) there is a high correlation between target site accessibility and GC-content. For a set of representative structural RNAs, the GC content of 62.6% for paired bases is significantly higher than the GC content of 38.7% for unpaired bases. Thus, for a structured RNA, a region with higher GC content is likely to have more stable secondary structure. Furthermore, by partial correlation analysis, the correlation for GC-content is almost completely diminished, when the effect of target accessibility is controlled. CONCLUSION: These findings provide a target-structure-based interpretation and mechanistic insight for the effect of GC-content on RNAi efficiency.