PtPd Atomic Layer Shelled PdCu Hollow Nanoparticles on Partially Unzipped Carbon Nanotubes for Breaking the Activity-Stability Trade-Off toward the Hydrogen Oxidation Reaction in Alkaline Media.

Developing highly active yet stable catalysts for the hydrogen oxidation reaction (HOR) in alkaline media remains a significant challenge. Herein, we designed a novel catalyst of atomic PtPd-layer shelled ultrasmall PdCu hollow nanoparticles (HPdCu NPs) on partially unzipped carbon nanotubes (PtPd@HPdCu/W-CNTs), which can achieve a high mass activity, 5 times that of the benchmark Pt/C, and show exceptional stability with negligible decay after 20,000 cycles of accelerated degradation test. The atomically thin PtPd shell serves as the primary active site for the HOR and a protective layer that prevents Cu leaching. Additionally, the HPdCu substrate not only tunes the adsorption properties of the PtPd layer but also prevents corrosive Pt from reaching the interface between NPs and the carbon support, thereby mitigating carbon corrosion. This work introduces a new strategy that leverages the distinct advantages of multiple components to address the challenges associated with slow kinetics and poor durability toward the HOR.

A universal approach to dual-metal-atom catalytic sites confined in carbon dots for various target reactions.

Here, a molecular-design and carbon dot-confinement coupling strategy through the pyrolysis of bimetallic complex of diethylenetriamine pentaacetic acid under low-temperature is proposed as a universal approach to dual-metal-atom sites in carbon dots (DMASs-CDs). CDs as the "carbon islands" could block the migration of DMASs across "islands" to achieve dynamic stability. More than twenty DMASs-CDs with specific compositions of DMASs (pairwise combinations among Fe, Co, Ni, Mn, Zn, Cu, and Mo) have been synthesized successfully. Thereafter, high intrinsic activity is observed for the probe reaction of urea oxidation on NiMn-CDs. In situ and ex situ spectroscopic characterization and first-principle calculations unveil that the synergistic effect in NiMn-DMASs could stretch the urea molecule and weaken the N-H bond, endowing NiMn-CDs with a low energy barrier for urea dehydrogenation. Moreover, DMASs-CDs for various target electrochemical reactions, including but not limited to urea oxidation, are realized by optimizing the specific DMAS combination in CDs.

Tailoring the Atomic-Local Environment of Carbon Nanotube Tips for Selective H2 O2 Electrosynthesis at High Current Densities.

The atomic-local environment of catalytically active sites plays an important role in tuning the activity of carbon-based metal-free electrocatalysts (C-MFECs). However, the rational regulation of the environment is always impeded by synthetic limitations and insufficient understanding of the formation mechanism of the catalytic sites. Herein, the possible cleavage mechanism of carbon nanotubes (CNTs) through the crossing points during ball-milling is proposed, resulting in abundant CNT tips that are more susceptible to be modified by heteroatoms, achieving precise modulation of the atomic environment at the tips. The obtained CNTs with N,S-rich tips (N,S-TCNTs) exhibit a wide potential window of 0.59 V along with H2 O2 selectivity for over 90.0%. Even using air as the O2 source, the flow cell system with N,S-TCNTs catalyst attains high H2 O2 productivity up to 30.37 mol gcat. -1  h-1 @350 mA cm-2 , superior to most reported C-MFECs. From a practical point of view, a solid electrolyzer based on N,S-TCNTs is further employed to realize the in-situ continuous generation of pure H2 O2 solution with high productivity (up to 4.35 mmol cm-2  h-1 @300 mA cm-2 ; over 300 h). The CNTs with functionalized tips hold great promise for practical applications, even beyond H2 O2 generation.

Fe/Co dual metal catalysts modulated by S-ligands for efficient acidic oxygen reduction in PEMFC.

Here, we report a conceptual strategy for introducing spatial sulfur (S)-bridge ligands to regulate the coordination environment of Fe-Co-N dual-metal centers (Spa-S-Fe,Co/NC). Benefiting from the electronic modulation, Spa-S-Fe,Co/NC catalyst showed remarkably enhanced oxygen reduction reaction (ORR) performance with a half-wave potential (E1/2) of 0.846 V and satisfactory long-term durability in acidic electrolyte. Combined experimental and theoretical studies revealed that the excellent acidic ORR activity with a remarkable stability observed for Spa-S-Fe,Co/NC is attributable to the optimal adsorption-desorption of ORR oxygenated intermediates achieved through charge-modulation of Fe-Co-N bimetallic centers by the spatial S-bridge ligands. These findings provide a unique perspective to regulate the local coordination environment of catalysts with dual-metal-centers to optimize their electrocatalytic performance.

The role of oxygen-vacancy in bifunctional indium oxyhydroxide catalysts for electrochemical coupling of biomass valorization with CO2 conversion.

Electrochemical coupling of biomass valorization with carbon dioxide (CO2) conversion provides a promising approach to generate value-added chemicals on both sides of the electrolyzer. Herein, oxygen-vacancy-rich indium oxyhydroxide (InOOH-OV) is developed as a bifunctional catalyst for CO2 reduction to formate and 5-hydroxymethylfurfural electrooxidation to 2,5-furandicarboxylic acid with faradaic efficiencies for both over 90.0% at optimized potentials. Atomic-scale electron microscopy images and density functional theory calculations reveal that the introduction of oxygen vacancy sites causes lattice distortion and charge redistribution. Operando Raman spectra indicate oxygen vacancies could protect the InOOH-OV from being further reduced during CO2 conversion and increase the adsorption competitiveness for 5-hydroxymethylfurfural over hydroxide ions in alkaline electrolytes, making InOOH-OV a main-group p-block metal oxide electrocatalyst with bifunctional activities. Based on the catalytic performance of InOOH-OV, a pH-asymmetric integrated cell is fabricated by combining the CO2 reduction and 5-hydroxymethylfurfural oxidation together in a single electrochemical cell to produce 2,5-furandicarboxylic acid and formate with high yields (both around 90.0%), providing a promising approach to generate valuable commodity chemicals simultaneously on both electrodes.

Carbon-Based Electrocatalysts for Acidic Oxygen Reduction Reaction.

Oxygen reduction reaction (ORR) is vital for clean and renewable energy technologies, which require no fossil fuel but catalysts. Platinum (Pt) is the best-known catalyst for ORR. However, its high cost and scarcity have severely hindered renewable energy devices (e.g., fuel cells) for large-scale applications. Recent breakthroughs in carbon-based metal-free electrochemical catalysts (C-MFECs) show great potential for earth-abundant carbon materials as low-cost metal-free electrocatalysts towards ORR in acidic media. This article provides a focused, but critical review on C-MFECs for ORR in acidic media with an emphasis on advances in the structure design and synthesis, fundamental understanding of the structure-property relationship and electrocatalytic mechanisms, and their applications in proton exchange membrane fuel cells. Current challenges and future perspectives in this emerging field are also discussed.

Bimodal Mesoporous Carbon Spheres with Small and Ultra-Large Pores Fabricated Using Amphiphilic Brush Block Copolymer Micelle Templates.

We report the self-assembly of amphiphilic polystyrene-block-poly(ethylene oxide) (PS-b-PEO) brush block copolymers (BBCPs) into spherical micelles in an ethanol/water mixture as an efficient templating approach to fabricate mesoporous carbon spheres using polydopamine as a carbon source. Mesopore sizes of up to 25 nm are well controlled and are dependent on the molecular weight (Mw) of the BBCP. Such large pores are difficult to obtain using traditional linear block copolymers templates. Furthermore, bimodal mesoporous carbon spheres with two populations of pore sizes (24.5 and 6.5 nm) are obtained using a BBCP coassembled with a small molecule surfactant (Pluronic F127). An oxygen reduction reaction is used to demonstrate that electrocatalytic performance can be tuned by controlling the carbon sphere morphologies. This work provides a novel and versatile method to fabricate carbon spheres with broadly tunable bimodal pore sizes for potential applications in catalysis, separations, and energy storage.