Comparative secretome metabolic dysregulation by six engineered dietary nanoparticles (EDNs) on the simulated gut microbiota.

The potential use of engineered dietary nanoparticles (EDNs) in diet has been increasing and poses a risk of exposure. The effect of EDNs on gut bacterial metabolism remains largely unknown. In this study, liquid chromatography-mass spectrometry (LC-MS) based metabolomics was used to reveal significantly altered metabolites and metabolic pathways in the secretome of simulated gut microbiome exposed to six different types of EDNs (Chitosan, cellulose nanocrystals (CNC), cellulose nanofibrils (CNF) and polylactic-co-glycolic acid (PLGA); two inorganic EDNs including TiO2 and SiO2) at two dietary doses. We demonstrated that all six EDNs can alter the composition in the secretome with distinct patterns. Chitosan, followed by PLGA and SiO2, has shown the highest potency in inducing the secretome change with major pathways in tryptophan and indole metabolism, bile acid metabolism, tyrosine and phenol metabolism. Metabolomic alterations with clear dose response were observed in most EDNs. Overall, phenylalanine has been shown as the most sensitive metabolites, followed by bile acids such as chenodeoxycholic acid and cholic acid. Those metabolites might be served as the representative metabolites for the EDNs-gut bacteria interaction. Collectively, our studies have demonstrated the sensitivity and feasibility of using metabolomic signatures to understand and predict EDNs-gut microbiome interaction.

Living and Conducting: Coating Individual Bacterial Cells with In†Situ Formed Polypyrrole.

Coating individual bacterial cells with conjugated polymers to endow them with more functionalities is highly desirable. Here, we developed an in situ polymerization method to coat polypyrrole on the surface of individual Shewanella oneidensis MR-1, Escherichia coli, Ochrobacterium anthropic or Streptococcus thermophilus. All of these as-coated cells from different bacterial species displayed enhanced conductivities without affecting viability, suggesting the generality of our coating method. Because of their excellent conductivity, we employed polypyrrole-coated Shewanella oneidensis MR-1 as an anode in microbial fuel cells (MFCs) and found that not only direct contact-based extracellular electron transfer is dramatically enhanced, but also the viability of bacterial cells in MFCs is improved. Our results indicate that coating individual bacteria with conjugated polymers could be a promising strategy to enhance their performance or enrich them with more functionalities.

Understanding charge transport in non-doped pristine and surface passivated hematite (Fe2O3) nanorods under front and backside illumination in the context of light induced water splitting.

Hematite (Fe2O3) nanorods on FTO substrates have been proven to be promising photoanodes for solar fuel production but only with high temperature thermal activation which allows diffusion of tin (Sn) ions from FTO, eventually enhancing their conductivity. Hence, there is a trade-off between the conductivity of Fe2O3, and the degradation of FTO occurring at high annealing temperatures (>750 °C). Here, we present a comprehensive study on undoped Fe2O3 nanorods under front and back illumination to find the optimum annealing temperature. Bulk/surface charge transport efficiency analysis demonstrates minimum bulk recombination indicating overall high quality crystalline Fe2O3 and the preservation of FTO conductivity. Surface recombination is further improved by growing a TiOx overlayer, which improves the photocurrent density from 0.2 mA cm-2 (backside) to 1.2 mA cm-2 under front side and 0.8 mA cm-2 under backside illumination. It is evident from this study that the performance of undoped and unpassivated hematite nanorods is limited by electron transport, whereas that of doped/passivated hematite nanorods is limited by hole transport.

Calcium phosphate coated Keratin-PCL scaffolds for potential bone tissue regeneration.

The incorporation of hydroxyapatite (HA) nanoparticles within or on the surface of electrospun polymeric scaffolds is a popular approach for bone tissue engineering. However, the fabrication of osteoconductive composite scaffolds via benign processing conditions still remains a major challenge to date. In this work, a new method was developed to achieve a uniform coating of calcium phosphate (CaP) onto electrospun keratin-polycaprolactone composites (Keratin-PCL). Keratin within PCL was crosslinked to decrease its solubility, before coating of CaP. A homogeneous coating was achieved within a short time frame (~10min) by immersing the scaffolds into Ca(2+) and (PO4)(3-) solutions separately. Results showed that the incorporation of keratin into PCL scaffolds not only provided nucleation sites for Ca(2+) adsorption and subsequent homogeneous CaP surface deposition, but also facilitated cell-matrix interactions. An improvement in the mechanical strength of the resultant composite scaffold, as compared to other conventional coating methods, was also observed. This approach of developing a biocompatible bone tissue engineering scaffold would be adopted for further in vitro osteogenic differentiation studies in the future.

Oligopolyphenylenevinylene-conjugated oligoelectrolyte membrane insertion molecules selectively disrupt cell envelopes of Gram-positive bacteria.

The modification of microbial membranes to achieve biotechnological strain improvement with exogenous small molecules, such as oligopolyphenylenevinylene-conjugated oligoelectrolyte (OPV-COE) membrane insertion molecules (MIMs), is an emerging biotechnological field. Little is known about the interactions of OPV-COEs with their target, the bacterial envelope. We studied the toxicity of three previously reported OPV-COEs with a selection of Gram-negative and Gram-positive organisms and demonstrated that Gram-positive bacteria are more sensitive to OPV-COEs than Gram-negative bacteria. Transmission electron microscopy demonstrated that these MIMs disrupt microbial membranes and that this occurred to a much greater degree in Gram-positive organisms. We used a number of mutants to probe the nature of MIM interactions with the microbial envelope but were unable to align the membrane perturbation effects of these compounds to previously reported membrane disruption mechanisms of, for example, cationic antimicrobial peptides. Instead, the data support the notion that OPV-COEs disrupt microbial membranes through a suspected interaction with diphosphatidylglycerol (DPG), a major component of Gram-positive membranes. The integrity of model membranes containing elevated amounts of DPG was disrupted to a greater extent by MIMs than those prepared from Escherichia coli total lipid extracts alone.

Inorganic-organic hybrid nanoprobe for NIR-excited imaging of hydrogen sulfide in cell cultures and inflammation in a mouse model.

Hydrogen sulfide (H2S) is an important gaseous signaling agent mediated by many physiological processes and diseases. In order to explore its role in biological signaling, much effort has been focused on developing organic fluorescent probes to image H2S. However, these downconversion H2S probes are impractical for bio-imaging beyond a certain depth because of the short tissue penetration of UV/visible light (as an excitation source). In most circumstance, these probes are also not suitable for long-term assay due to photo-bleaching. Herein, a new design to detect H2S based on the coumarin-hemicyanine (CHC1)-modified upconversion nanophosphors is reported. This inorganic-organic integrated nanoprobe is demonstrated to display a fast response time with a large ratiometric upconversion luminescence (UCL) enhancement, and extraordinary photo-stability. CHC1-UCNPs not only can be used for ratiometric UCL monitoring of pseudo-enzymatic H2S production in living cells, but can also be used to identify the risk of endotoxic shock through ratiometric UCL imaging of tissue and measurement of endogenous H2S levels in plasma. The first ratiometric UCL H2S nanoprobe reported here may be further developed as the next-generation diagnostic tool for the detection of inflammatory-related diseases.

Rhodamine-modified upconversion nanophosphors for ratiometric detection of hypochlorous acid in aqueous solution and living cells.

Hypochlorous acid (HOCl), a reactive oxygen species (ROS) produced by myeloperoxidase (MPO) enzyme-mediated peroxidation of chloride ions, acts as a key microbicidal agent in immune systems. However, misregulated production of HOCl could damage host tissues and cause many inflammation-related diseases. Due to its biological importance, many efforts have been focused on developing fluorescent probes to image HOCl in living system. Compared with those conventional fluorescent probes, up-conversion luminescence (UCL) detection system has been proven to exhibit a lot of advantages including no photo-bleaching, higher light penetration depth, no autofluorescence and less damage to biosamples. Herein, we report a novel water-soluble organic-nano detection system based on rhodamine-modified UCNPs for UCL-sensing HOCl. Upon the interaction with HOCl, the green UCL emission intensity in the detection system were gradually decreased, but the emissions in the NIR region almost have no change, which is very important for the ratiometric UCL detection of HOCl in aqueous solution. More importantly, RBH1-UCNPs could be used for the ratiometric UCL visualization of HOCl released by MPO-mediated peroxidation of chloride ions in living cells. This organic-nano system could be further developed into a novel next-generation imaging technique for bio-imaging HOCl in living system without background noise.

Biogenic tellurium nanorods as a novel antivirulence agent inhibiting pyoverdine production in Pseudomonas aeruginosa.

While antibiotic resistance in bacteria is rapidly increasing, the development of new antibiotics has decreased in recent years. Antivirulence drugs disarming rather than killing pathogens have been proposed to alleviate the problem of resistance inherent to existing biocidal antibiotics. Here, we report a nontoxic biogenic nanomaterial as a novel antivirulence agent to combat bacterial infections caused by Pseudomonas aeruginosa. We synthesized, in an environmentally benign fashion, tellurium nanorods (TeNRs) using the metal-reducing bacterium Shewanella oneidensis, and found that the biogenic TeNRs could effectively inhibit the production of pyoverdine, one of the most important virulence factors in P. aeruginosa. Our results suggest that amyloids and extracellular polysaccharides Pel and Psl are not involved in the interactions between P. aeruginosa and the biogenic TeNRs, while flagellar movement plays an important role in the cell-TeNRs interaction. We further showed that the TeNRs (up to 100 µg/mL) did not exhibit cytotoxicity to human bronchial epithelial cells and murine macrophages. Thus, biogenic TeNRs hold promise as a novel antivirulence agent against P. aeruginosa.

Mechanistic insights into the effect of nanoparticles on zebrafish hatch.

Aquatic organisms are susceptible to waterborne nanoparticles (NP) and there is only limited understanding of the mechanisms by which these emerging contaminants may affect biological processes. This study used silicon (nSi), cadmium selenide (nCdSe), silver (nAg) and zinc NPs (nZnO) as well as single-walled carbon nanotubes (SWCNT) to assess NP effects on zebrafish (Danio rerio) hatch. Exposure of 10 mg/L nAg and nCdSe delayed zebrafish hatch and 100 mg/L of nCdSe as well as 10 and 100 mg/L of uncoated nZnO completely inhibited hatch and the embryos died within the chorion. Both the morphology and the movement of the embryos were not affected, and it was determined that the main mechanism of hatch inhibition by NPs is likely through the interaction of NPs with the zebrafish hatching enzyme. Furthermore, it was concluded that the observed effects arose from the NPs themselves and not their dissolved metal components.

Engineering PQS biosynthesis pathway for enhancement of bioelectricity production in pseudomonas aeruginosa microbial fuel cells.

The biosynthesis of the redox shuttle, phenazines, in Pseudomonas aeruginosa, an ubiquitous microorganism in wastewater microflora, is regulated by the 2-heptyl-3,4-dihydroxyquinoline (PQS) quorum-sensing system. However, PQS inhibits anaerobic growth of P. aeruginosa. We constructed a P. aeruginosa strain that produces higher concentrations of phenazines under anaerobic conditions by over-expressing the PqsE effector in a PQS negative ΔpqsC mutant. The engineered strain exhibited an improved electrical performance in microbial fuel cells (MFCs) and potentiostat-controlled electrochemical cells with an approximate five-fold increase of maximum current density relative to the parent strain. Electrochemical analysis showed that the current increase correlates with an over-synthesis of phenazines. These results therefore demonstrate that targeting microbial cell-to-cell communication by genetic engineering is a suitable technique to improve power output of bioelectrochemical systems.

Improving charge collection in Escherichia coli-carbon electrode devices with conjugated oligoelectrolytes.

It is important to tailor biotic-abiotic interfaces in order to maximize the utility of bioelectronic devices such as microbial fuel cells (MFCs), electrochemical sensors and bioelectrosynthetic systems. The efficiency of electron-equivalent extraction (or injection) across such biotic-abiotic interfaces is dependent on the choice of the microbe and the conductive electrode material. In this contribution, we show that spontaneous intercalation of a conjugated oligoelectrolyte, namely 4,4'-bis(4'-(N,N-bis(6''-(N,N,N-trimethylammonium)hexyl)amino)-styryl)stilbene tetraiodide (DSSN+), into the membranes of Escherichia coli leads to an increase in current generation in MFCs containing carbon-based electrodes. A combination of scanning electron microscopy (SEM) and confocal microscopy was employed to confirm the incorporation of DSSN+ into the cell membrane and biofilm formation atop carbon felt electrodes. Current collection was enhanced by more than 300% with addition of this conjugated oligoelectrolyte. The effect of DSSN+ concentration on electrical output was also investigated. Higher concentrations, up to 25 µM, lead to an overall increase in the number of charge equivalents transferred to the charge-collecting electrode, providing evidence in support of the central role of the synthetic system in improving device performance.

Cytotoxic and genotoxic characterization of titanium dioxide, gadolinium oxide, and poly(lactic-co-glycolic acid) nanoparticles in human fibroblasts.

Engineered nanomaterials have become prevalent in our everyday life. While the popularity of using nanomaterials in consumer products continues to rise, increasing awareness of nanotoxicology has also fuelled efforts to accelerate our understanding of the ill effects that different nanomaterials can bring to biological systems. In this study, we investigated the potential cytotoxicity and genotoxicity of three nanoparticles: titanium dioxide (TiO(2)), terbium-doped gadolinium oxide (Tb-Gd(2)O(3)), and poly(lactic-co-glycolic acid) (PLGA). To evaluate nanoparticle-induced genotoxicity more realistically, a human skin fibroblast cell line (BJ) with less mutated genotype compared with cancer cell line was used. The nanoparticles were first characterized by size, morphology, and surface charge. Cytotoxicity effects of the nanoparticles were then evaluated by monitoring the proliferation of treated BJ cells. Genotoxic influence was ascertained by profiling DNA damage via detection of γH2AX expression. Our results suggested that both TiO(2) and Tb-Gd(2)O(3) nanoparticles induced cytotoxicity in a dose dependent way on BJ cells. These two nanomaterials also promoted genotoxicity via DNA damage. On the contrary, PLGA nanoparticles did not induce significant cytotoxic or genotoxic effects on BJ cells.

Exposure to titanium dioxide nanoparticles induces autophagy in primary human keratinocytes.

Understanding the mechanisms of cell-nanomaterial interactions is vital in harnessing the potential of using nanomaterials in biomedical applications. By immuno-labeling of LC3 and TEM analysis, it is found that titanium dioxide nanoparticles are internalized by human keratinocytes and induce autophagy. Autophagy appears to play a cytoprotective role in response to toxicity influence exerted by the nanoparticles.

Size influences the cytotoxicity of poly (lactic-co-glycolic acid) (PLGA) and titanium dioxide (TiO(2)) nanoparticles.

The aim of this study is to uncover the size influence of poly (lactic-co-glycolic acid) (PLGA) and titanium dioxide (TiO(2)) nanoparticles on their potential cytotoxicity. PLGA and TiO(2) nanoparticles of three different sizes were thoroughly characterized before in vitro cytotoxic tests which included viability, generation of reactive oxygen species (ROS), mitochondrial depolarization, integrity of plasma membrane, intracellular calcium influx and cytokine release. Size-dependent cytotoxic effect was observed in both RAW264.7 cells and BEAS-2B cells after cells were incubated with PLGA or TiO(2) nanoparticles for 24 h. Although PLGA nanoparticles did not trigger significantly lethal toxicity up to a concentration of 300 µg/ml, the TNF-α release after the stimulation of PLGA nanoparticles should not be ignored especially in clinical applications. Relatively more toxic TiO(2) nanoparticles triggered cell death, ROS generation, mitochondrial depolarization, plasma membrane damage, intracellular calcium concentration increase and size-dependent TNF-α release, especially at a concentration higher than 100 µg/ml. These cytotoxic effects could be due to the size-dependent interaction between nanoparticles and biomolecules, as smaller particles tend to adsorb more biomolecules. In summary, we demonstrated that the ability of protein adsorption could be an important paradigm to predict the in vitro cytotoxicity of nanoparticles, especially for low toxic nanomaterials such as PLGA and TiO(2) nanoparticles.

Enhancing the photocatalytic efficiency of TiO2 nanopowders for H2 production by using non-noble transition metal co-catalysts.

Co and Ni-nanoclusters are attractive alternatives to Pt catalysts for hydrogen generation. These earth abundant elements when loaded onto the TiO(2) nanopowders surface act as efficient co-catalysts. Co, Ni-decorated TiO(2) photocatalysts display only three (3) times lower catalytic activities for H(2) evolution under UV illumination compared with Pt-decorated TiO(2) photocatalysts.

Nanostructure control of graphene-composited TiO2 by a one-step solvothermal approach for high performance dye-sensitized solar cells.

We present a one-step solvothermal approach to prepare uniform graphene-TiO(2) nanocomposites with delicately controlled TiO(2) nanostructures, including ultra-small 2 nm nanoparticles, 12 nm nanoparticles and nanorods. Using three composites as photoanode materials, the effect of nanostructure of graphene-composited TiO(2) on the performance of dye-sensitized solar cells was investigated, and results showed that the ultra-small 2 nm TiO(2)-graphene composite based photoanode exhibited the highest power conversion efficiency of 7.25%.

A three-way synergy of triple-modified Bi2WO6/Ag/N-TiO2 nanojunction film for enhanced photogenerated charges utilization.

We demonstrate a general strategy to prepare Bi(2)WO(6)/Ag/N-TiO(2) film with double visible-light-active components bridged by Ag nanoparticles as an electron shuttle, which exhibits enhanced photocatalytic activity and photoelectrochemical performance under visible light.

Evaluation of the cytotoxic and inflammatory potential of differentially shaped zinc oxide nanoparticles.

Zinc oxide (ZnO) nanoparticles have wide-ranging applications in a diverse array of industrial and consumer products, from ceramic manufacture and paint formulation to sunscreens and haircare products. Hence, it is imperative to rigorously characterize the health and safety aspects of human exposure to ZnO nanoparticles. This study therefore evaluated the cellular association, cytotoxic and inflammatory potential of spherical and sheet-shaped ZnO nanoparticles (of approximately the same specific surface area ≈30 cm²/g) on mouse and human cell lines (RAW-264.7 and BEAS-2B respectively), as well as with primary cultures of mouse bone marrow-derived dendritic cells (DC). The WST-8 assay demonstrated dose-dependent effects on the cytotoxicity of spherical and sheet-shaped ZnO nanoparticles on both RAW-264.7 and BEAS-2B cells, even though there was no significant effect of shape on the cytotoxicity of ZnO nanoparticles. There was however higher cellular association of spherical versus sheet-shaped ZnO nanoparticles. Measurement of reactive oxygen species (ROS) with the 2',7'-dichlorfluorescein-diacetate (DCFH-DA) assay indicated up to 4-folds increase in ROS level upon exposure to ZnO nanoparticles, but there was again no significant difference between both ZnO nanoparticle shapes. Exposure of primary dendritic cells to ZnO nanoparticles upregulated expression of CD80 and CD86 (well-known markers of DC activation and maturation) and stimulated release of pro-inflammatory cytokines--IL-6 and TNF-α, thus pointing to the potential of ZnO nanoparticles in inducing inflammation. Hence, our study indicated that ZnO nanoparticles can have potential detrimental effects on cells even at dosages where there are little or no observable cytotoxic effects.

In vitro assessment of cellular responses to rod-shaped hydroxyapatite nanoparticles of varying lengths and surface areas.

Rod-shaped hydroxyapatite nanoparticles of varying dimensions (≈ 60 ± 10, 120 ± 15, 240 ± 30 nm in length, labeled respectively as nHA60, nHA120 and nHA240) with specific surface areas (47.02, 23.33, 46.12 nm(2), respectively), were synthesized and their effects on cell viability, reactive oxygen species generation and cellular interaction with BEAS-2B, RAW264.7 and HepG2 were investigated. In vitro exposure of these cell lines to rod shape nHA particles within a range of 10-300 µg/ml for 24 h did not significantly alter cell viability studied by the WST-8 assay. A significant increase in reactive oxygen species (ROS) generation was however observed with the dihydrofluorescein diacetate (DFDA) assay after 4 h incubation with these nanoparticles. The lowest level of ROS generation was observed with nHA120 (with the smallest specific surface area); whereas nHA60 and nHA240 exhibited comparable ROS generation. Subsequently, the Alizarin Red-S (ARS) assay indicated a weaker association of calcium with cells compared to nHA60 and nHA240. The results thus suggest that high surface area may increase cell-particle interaction, which in turn influenced ROS generation. The combined results from all the cell lines thus indicated high biocompatibility of rod-shaped nHA.

Cellular uptake of Poly-(D,L-lactide-co-glycolide) (PLGA) nanoparticles synthesized through solvent emulsion evaporation and nanoprecipitation method.

Poly-(D,L-lactide-co-glycolide) (PLGA) nanoparticles have been widely studied for drug delivery. The aim of this study is to determine how cellular uptake of these nanoparticles is influenced by different surface properties, incubation time, particle concentration and cell types. Spherical coumarin-6 loaded PLGA nanoparticles with a size of about 100 nm were synthesized through solvent emulsion evaporation and nanoprecipitation methods. In vitro cellular uptake efficiency was determined using human bronchial epithelial cells (BEAS-2B) and murine monocyte-derived macrophage (RAW264.7) cells. PLGA nanoparticles were incubated with these cells in a concentration range of 10-300 µg/ml for different time periods. The results show that cellular uptake decreased for nanoparticles surface coated with PVA surfactant and was especially limited for severely aggregated particles. At higher particle concentration, the total amount of particles taken up by cells increased while the uptake efficiency decreased. In addition, cells could take up more particles with longer incubation time, although the uptake rate decreased gradually with time. Finally, RAW264.7 cells show increased uptake compared to BEAS-2B cells. The information drawn from this study would provide important clues on how nanomaterials interact with cells and how these interactions can influence biocompatibility or toxicity.