RESUMO
OBJECTIVES: This study aimed to develop and evaluate a fully automated method for visualizing and measuring tooth wear progression using pairs of intra-oral scans (IOSs) in comparison with a manual protocol. METHODS: Eight patients with severe tooth wear progression were retrospectively included, with IOSs taken at baseline and 1-year, 3-year, and 5-year follow-ups. For alignment, the automated method segmented the arch into separate teeth in the IOSs. Tooth pair registration selected tooth surfaces that were likely unaffected by tooth wear and performed point set registration on the selected surfaces. Maximum tooth profile losses from baseline to each follow-up were determined based on signed distances using the manual 3D Wear Analysis (3DWA) protocol and the automated method. The automated method was evaluated against the 3DWA protocol by comparing tooth segmentations with the Dice-Sørensen coefficient (DSC) and intersection over union (IoU). The tooth profile loss measurements were compared with regression and Bland-Altman plots. Additionally, the relationship between the time interval and the measurement differences between the two methods was shown. RESULTS: The automated method completed within two minutes. It was very effective for tooth instance segmentation (826 teeth, DSCâ¯=â¯0.947, IoUâ¯=â¯0.907), and a correlation of 0.932 was observed for agreement on tooth profile loss measurements (516 tooth pairs, mean differenceâ¯=â¯0.021mm, 95% confidence intervalâ¯=â¯[-0.085, 0.138]). The variability in measurement differences increased for larger time intervals. CONCLUSIONS: The proposed automated method for monitoring tooth wear progression was faster and not clinically significantly different in accuracy compared to a manual protocol for full-arch IOSs. CLINICAL SIGNIFICANCE: General practitioners and patients can benefit from the visualization of tooth wear, allowing quantifiable and standardized decisions concerning therapy requirements of worn teeth. The proposed method for tooth wear monitoring decreased the time required to less than two minutes compared with the manual approach, which took at least two hours.
RESUMO
OBJECTIVE: Literature was systematically reviewed to identify salivary characteristics and their association with tooth wear. DATA: A protocol was developed a priori (PROSPERO CRD42022338590). Established systematic review methods were used for screening, data extraction, and synthesis. Risk of bias and the certainty of evidence were assessed using the JBI tools and GRADE, respectively. Direct and indirect association between tooth wear and salivary components and characteristics were assessed. SOURCES: MEDLINE, Embase, SCOPUS, Web of Science, CINAHL, and additional sources were searched. STUDY SELECTION: Studies reporting salivary characteristics in patients with tooth wear or models thereof were included. Animal and in-vitro studies and case reports were excluded. RESULTS: One-hundred eleven studies were included. Qualitative analyses showed a negative association between tooth wear and salivary pH and flow rate in many studies. The higher the study size the higher the chances that an association with pH and flow rate was found. Xerostomia, buffer capacity and salivary consistency/viscosity had also some degree of association with tooth wear in fewer studies. Associations with the 39 salivary components were scarcer. Random effects meta-analyses (7 studies) showed that pH levels in stimulated whole saliva were lower in patient with tooth wear compared to controls (-0.07 [-0.10 to -0.04]). However, there was not enough evidence to establish a quantitative association with flow rate. The general risk of bias was unclear and the certainty of evidence was low or very low. A large diversity of methodologies limited the inclusion of all studies in quantitative synthesis. CONCLUSION: From all potential risk factors, stimulated whole saliva pH showed a negative association, both quantitatively and qualitatively with tooth wear, indicating potential usefulness of pH monitoring in these patients. Moreover, associations between flow rate and tooth wear were observed qualitatively. However, in both cases the risk of bias was mostly unclear, and the certainty of evidence was low. No causal associations could be observed. CLINICAL SIGNIFICANCE: Tooth wear is a prevalent condition that may lead to functional or esthetic impairments and pain. Knowing the potential risk factors like salivary pH or flow rate and their dynamics could be relevant during tooth wear monitoring and to intervene accordingly, especially in conditions like gastroesophageal reflux disease.
Assuntos
Atrito Dentário , Erosão Dentária , Desgaste dos Dentes , Xerostomia , Humanos , Erosão Dentária/etiologia , Desgaste dos Dentes/complicações , SalivaRESUMO
Patients with tooth wear are commonly encountered in general dental practice. When indicated, restorative rehabilitation is often accompanied by a request from the patient for an aesthetic, tooth-coloured outcome. This article seeks to provide an evidence-based approach, focussing on the longevity of the materials which can be used for the restorative treatment of tooth wear, as well as their modes of failure and observed performance.
Assuntos
Atrito Dentário , Desgaste dos Dentes , Humanos , Desgaste dos Dentes/terapia , Odontologia GeralRESUMO
OBJECTIVES: To compare clinical performance of resin composite posterior Class-II restorations placed with etch-and-rinse adhesive or open sandwich technique using glass-ionomer cement. METHODS: Data on Class II restorations placed by one dentist between 1990 and 2016 were collected from patient files, including caries risk, tooth related variables, applied materials and dates of last check-up visit and restoration placement. Open sandwich restorations were placed before 2001, while after 2001, a total-etch technique using etch-and-rinse 3-step adhesive was used when placing a Class II composite restoration. For statistical analysis, Kaplan-Meier statistics and a multilevel Cox-Regression was conducted (p < 0.05). Annual Failures Rates (AFR) were calculated. RESULTS: 675 Class II restorations were placed in 91 patients, 491 total-etch restorations (observation time 2-18 y), and 184 open sandwich restorations (observation time 19-29 y) showing AFRs at 15 years as 2.9 % for total-etch and 9.7 % for open sandwich restorations. Secondary caries as failure was equally distributed among the 2 groups and 27 % of the failures in the open sandwich group were due to proximal deterioration of glass-ionomer cement. The Cox-regression showed a significant higher risk for failure for the open sandwich technique compared to total-etch class-II composite restorations (HR = 2.9; p < 0.001). SIGNIFICANCE: Application of glass-ionomer cement using the open sandwich technique cannot be recommended for class-II restorations as being more complex and showing poorer clinical performance.
Assuntos
Cárie Dentária , Cimentos de Ionômeros de Vidro , Humanos , Resinas Compostas , Cimentos de Resina , Restauração Dentária Permanente/métodos , Cárie Dentária/terapiaRESUMO
OBJECTIVES: Non-carious tooth wear often has a multifactorial etiology and may lead to functional or aesthetically related problems. The most common complaints associated with tooth wear are dissatisfaction with dental appearance and a negative impact on the experienced Oral Health Related Quality of Life (OHRQoL). The aim of this study was to investigate the change in OHRQoL and the perception of aesthetics, following restorative treatment of moderate to severe tooth wear patients, with a five-year follow-up. METHODS: An explorative study, based on prospective data, was performed. OHRQoL and the perception of aesthetics were measured with the OHIP-NL and OES-NL. These questionnaires were completed before treatment, one month after treatment, and at 1-, 3- and 5-years post-treatment. Treatment involved full mouth reconstruction with composite resin restorations. The data was analysed as repeated measures by using a linear mixed-effects model. RESULTS: One hundred and twenty-three tooth wear patients that received restorative rehabilitation were included (97 males, 26 females, 37.5 ± 8.8 years-old). Data showed a statistically significant increase in both experienced OHRQoL and orofacial appearance after restorative treatment. The OHIP-scores remained stable over time, while the OES-scores slightly decreased during the years after treatment. Regarding the seven domains of the OHIP, the largest difference in OHIP-score was found in the domain of 'Psychological Discomfort'. The mean overall OHIP-score was 1.8 at baseline and 1.3 at the 5-years recall. The mean OES score increased from 41.8 at baseline to 66.1 at the 5-years follow-up. CONCLUSIONS: Tooth wear patients reported significant improvements in their OHRQoL and their perception of orofacial aesthetics after restorative treatment. This increase remained at least five years post-treatment. CLINICAL SIGNIFICANCE: The clinical impact of restorative treatment for tooth wear patients is considerable. This paper emphasizes the need to include a discussion of the patient related outcome measures when planning care.
Assuntos
Atrito Dentário , Desgaste dos Dentes , Masculino , Feminino , Humanos , Adulto , Pessoa de Meia-Idade , Seguimentos , Qualidade de Vida , Estudos Prospectivos , Estética Dentária , Desgaste dos Dentes/reabilitação , Inquéritos e Questionários , Percepção , Saúde BucalRESUMO
BACKGROUND: Tooth wear is a multifactorial condition, leading to the irreversible loss of dental hard tissues. The availability of an unambiguous, universally applicable assessment protocol remains lacking. OBJECTIVES: The goal of the authors is to develop a set of diagnostic criteria for the assessment of tooth wear (DC-TW). A two-step approach will be used to achieve this objective: (1) to develop a preliminary beta version of the DC-TW, based on the authors' clinical experience and their shared expertise and supported by a narrative review of the existing literature, and (2) to develop the final DC-TW, with input from a larger group of experts using an international Delphi process. This paper relates to the first step. METHODS: The authors outlined the components that should be incorporated into the DC-TW. The literature search was performed to investigate if their concept was in line with the available literature. The search was conducted to identify eligible publications from inception to July 11, 2022. Two authors independently screened all publications, and differences in judgements were resolved through a consensus procedure. RESULTS: The search yielded 5362 publications, resulting in the final inclusion of 383. These publications were divided into four main topics: (1) nomenclature/taxonomies; (2) self-report tools; (3) clinical assessment tools; and (4) clinical decision-making. CONCLUSIONS: The information from the publications was used and fused with the clinical experience and shared expertise of the authors to contribute to the development of a preliminary beta version of the DC-TW.
Assuntos
Prova Pericial , Desgaste dos Dentes , Humanos , Desgaste dos Dentes/diagnóstico , ConsensoRESUMO
Patients with more severe forms of tooth wear may require restorative rehabilitation. The decision to commence treatment must be taken carefully and there are a multitude of factors to consider. Alongside the clinical signs and symptoms typically associated with tooth wear, there is also the need to assess the impact of the condition on the patient's oral health-related quality of life. As part of the discussions relating to the attainment of informed consent for the restoration of the worn dentition, not only is it relevant to appropriately appraise the risks, benefits, costs, reasonable alternatives and likely prognosis of the proposed treatments, but to also elaborate on the expected impact of the intervention on the patient's oral health-related quality of life. The aim of this article is to review the evidence relating to the impact of the quality of life with the management of tooth wear, with the introduction of the concept of an evidence-based approach to decision-making when planning care.
Assuntos
Atrito Dentário , Desgaste dos Dentes , Humanos , Qualidade de Vida , Desgaste dos Dentes/terapia , Desgaste dos Dentes/diagnóstico , Consentimento Livre e EsclarecidoRESUMO
Although we are increasingly recognising the need to assess patients for accelerated rates of tooth wear progression, it is often difficult to do so within a feasible diagnostic window. This paper aims to provide evidence-based timelines which a diagnosing clinician can expect to assess tooth wear progression in study models, clinical indices, clinical photographs and visually with intraoral scans. It also discusses new technologies emerging for the quantitative assessment of tooth wear, timelines for diagnosis, and caveats in the 3D scan registration and analysis process.
Assuntos
Atrito Dentário , Erosão Dentária , Desgaste dos Dentes , Humanos , Erosão Dentária/diagnóstico , Erosão Dentária/etiologia , Desgaste dos Dentes/diagnóstico , Desgaste dos Dentes/etiologiaRESUMO
PURPOSE: This retrospective case series of 9 patients aimed to describe clinical outcomes and patient satisfaction following the implementation of the posterior Dahl concept to manage localized posterior tooth wear. MATERIALS AND METHODS: Localized occlusal space was created in the posterior dentition. Supra-occluding direct restorations were placed bilaterally for the restoration of molars. Intraoral scans were taken at the pre-treatment stage, immediately post-restoration, and during follow-up appointments. Scans were used to undertake analysis of any occlusal changes and re-establishment of the occlusion. A questionnaire was used to assess patient satisfaction, alleviation of any pre-treatment concerns, and evaluation of post-treatment complaints. RESULTS: Immediately post-treatment, all patients showed an increase in the vertical dimension. Opening of the bite in the untreated areas following restoration of worn posterior molars resulted either in a tendency towards or the actual reestablishment of the occlusion. One patient completely lacked compensatory vertical tooth movement in the untreated areas, culminating in the persistence of a vertical open bite. One restoration displayed cohesive fracture after 4 months. Pre-treatment problems (eg, sensitivity) were fully resolved amongst all patients after 6 months. Post-treatment complaints were minor and demonstrated resolution within a relatively short period of time. Eight patients reported being "very satisfied" with their treatment outcomes. CONCLUSION: Application of the posterior Dahl concept appears to offer a promising, relatively simple, minimally invasive and effective approach for the management of localized posterior tooth wear, which is well accepted by patients.
Assuntos
Restauração Dentária Permanente , Desgaste dos Dentes , Humanos , Restauração Dentária Permanente/métodos , Estudos Retrospectivos , Desgaste dos Dentes/terapia , Satisfação do Paciente , Dimensão VerticalRESUMO
BACKGROUND: Evaluation of a new vertical dimension of occlusion (VDO) in complex restorative treatments is considered a necessary step prior to placement of restorations. OBJECTIVES: This randomised controlled trial (RCT) aimed to assess the effects of using an evaluation of a VDO increase before restorative treatment in patients with moderate-to-severe tooth wear, on OHRQoL, freeway space (FWS) and interventions to restorations. METHODS: Forty-two patients with tooth wear were included and randomly allocated to either a test phase with a Removable Appliance (RA) or no test phase. Restorative treatment consisted of restoration of all teeth using composite restorations in an increased VDO. OHIP-score, freeway space (FWS) and clinical acceptability of restorations were assessed at baseline and at recall appointments (1 month and 1 year). Intervention to restoration was scored in case of material chipping or when the abutment tooth had increased sensitivity that could be linked to occlusal overloading. ANCOVA analyses, Univariate Cox regression, t-tests and descriptive analyses were performed (p < .05). RESULTS: Clinical follow-up after 1 year was completed for 41 patients. No significant effect of testing the VDO with a RA could be found on the OHIP-score (p = .14). Reduction of FWS in the RA group, compared to the control group, was significantly lower at 1 year (p = .01, 95% CI -1.09 to -0.15). No effect on early interventions to restorations was found (p = .94). CONCLUSION: This RCT showed that a removable appliance is not indicated to functionally test the increased VDO prior to restorative treatment in patients with tooth wear.
Assuntos
Restauração Dentária Permanente , Desgaste dos Dentes , Humanos , Restauração Dentária Permanente/métodos , Dimensão Vertical , Desgaste dos Dentes/terapia , Oclusão Dentária , Cabeça , Resinas Compostas/uso terapêuticoRESUMO
OBJECTIVES: Deterioration in anterior resin composite restorations placed in tooth wear patients was investigated after 36 months. MATERIALS AND METHODS: Data collected prospectively for 47 participants of the Radboud Tooth Wear Project were used (41 ± 8 years, 90% male, n = 270 restorations). Restorations were individually evaluated using intraoral photographs and 3D scans to rate modified FDI scores and to record the presence of degradation features. Four groups with distinct combinations of composites and techniques were assessed, and multivariable logistic regression models were used to analyze the data (p < 0.05). RESULTS: For all groups together, early degradation signs were present at 1 month: irregularities (41.5%) and ditching (7.4%) were observed at the surface and adhesive interfaces. The frequency of irregularities decreased in the 36-month evaluation (37%), but ditching (12.2%) and fractures (10.7%) were more common. The most frequent deterioration (based on photographs) was observed for staining (44%) and loss of luster (31%). In 3D scans, the most frequent were for wear (25%), marginal adaptation (24%), and the presence of irregularities (19%). Canines had 5.5 times more chances of deterioration by ditching than incisors (p < 0.001). The differences between composites and restorative techniques were minor. CONCLUSIONS: A continuous degradation process of restorations placed in tooth wear patients was observed in anterior teeth restored with different composites, with a progression of the deterioration over 36 months. CLINICAL RELEVANCE: When placing anterior resin composite restorations in tooth wear patients, it could be important to establish realistic expectations and the need for checkup appointments.
Assuntos
Restauração Dentária Permanente , Desgaste dos Dentes , Masculino , Feminino , Humanos , Restauração Dentária Permanente/métodos , Resinas Compostas , Desgaste dos Dentes/terapia , CorRESUMO
PURPOSE: To describe the digital workflow applied for restoring a severely worn dentition with minimally invasive CAD/CAM resin nano-composite restorations. MATERIALS AND METHODS: A 40-year-old male in good general health and with full-arch dentition suffered from dentin hypersensitivity and wanted to improve the esthetics of his worn anterior teeth. The dental wear can be described as general, grade 3, according to the Tooth Wear Index,27 with more wear in maxillary than in mandibular teeth. Signs and symptoms were typical for a chemical type of wear, with some mechanical wear also apparent. No functional problems, eg, impaired chewing, were present. On the OHIP-49 questionnaire, the patient expressed a reduced quality of life. The goal of the treatment was to reconstruct the anatomical form of the teeth as far as possible, thereby also improving quality of life. Due to the rather large volume of lost tooth tissue per tooth, indirect treatment using CAD/CAM resin nano-composite restorations (LAVA Ultimate, 3M Oral Care) was applied. RESULTS: The seating of the CAD/CAM resin nano-composite restorations (LAVA Ultimate, 3M Oral Care) restorations was considered precise. CONCLUSION: In the treatment of severe tooth wear, the described digital workflow using CAD/CAM restorations for occluding restorations and direct composite materials in the esthetic zone is a potential treatment modality that is workable and minimally invasive.
Assuntos
Dentição , Desgaste dos Dentes , Adulto , Resinas Compostas , Desenho Assistido por Computador , Humanos , Qualidade de Vida , Desgaste dos Dentes/terapiaRESUMO
PURPOSE: This study investigated the ability of two chewing simulation devices to emulate in vitro the clinical deterioration observed in anterior composite restorations in severe tooth-wear patients. MATERIALS AND METHODS: Advanced tooth wear was simulated in bovine incisors, which were restored with palatal and buccal direct composite veneer restorations. The incisal edges of restorations were subjected to 960K cycles of either compressive loading (Biocycle-V2; 125 N at 2 Hz) or wear and mechanical loading (Rub and Roll; 30 N at 20 rpm). Surface degradation was rated using FDI scores to compare the chewing devices (Fisher's test, a = 0.05). Topography and deterioration of restorations was analyzed using SEM. The ability to emulate the deterioration was investigated by comparing the surface degradation observed in vitro with the clinical degradation observed in restorations placed in severe tooth-wear patients after 3.5 years. RESULTS: Distinct degradation patterns were observed between the simulation devices: Biocycle-V2 generated deterioration that was not comparable to the clinical situation, including contact damage, minor wear, and localized roughening. The degradation caused by Rub and Roll was more similar to the in vivo situation, including wear facets, chipping, delamination, staining, and marginal ditching. The FDI scores were different between the chewing devices for surface/marginal staining, material/retention, and marginal adaptation (p = 0.003). SEM analysis showed microcracking at the interface between composite layers at the incisal edges. CONCLUSIONS: The Rub and Roll chewing device was able to emulate the clinical deterioration observed in anterior restorations in severe tooth-wear patients and thus may be used as an oral-cavity simulation method, contributing to translational research.
Assuntos
Deterioração Clínica , Desgaste dos Dentes , Animais , Bovinos , Resinas Compostas , Restauração Dentária Permanente/métodos , Humanos , Mastigação , Desgaste dos Dentes/terapiaRESUMO
PURPOSE: The aim of this prospective study was to evaluate the clinical performance of minimally invasive, CAD/CAM nano-ceramic (composite) restorations in patients with severe tooth wear, the effect of the restorative treatment on the oral health-related quality of life (OHRQoL), and the etiology of tooth wear as a risk factor for restoration failure. MATERIALS AND METHODS: Patients with generalized severe tooth wear were included. Restorations (LAVA Ultimate, 3M Oral Care) were cemented (RelyX Ultimate, 3M Oral Care) on all teeth and were evaluated after 1 month and 1 year. OHRQoL was assessed via questionnaires at baseline and after 1 year. Differences were evaluated (paired t-test). Two mechanical tooth-wear lesions resulting from tooth-tooth contact, and 3 chemical tooth wear lesions resulting from intrinsic or extrinsic acids dissolving natural hard tooth substance, were evaluated to assess the etiology of tooth wear in association with restoration failure using multilevel logistic regression analyses (p < 0.05). RESULTS: Twenty-one patients (age: 41.7 ± 10.4 years) were evaluated after 1 year (13.5 ± 1.2 months). 568 indirect CAD/CAM restorations were placed. None were replaced or lost. Twelve were repaired and 10 were refurbished. Success rates were 100% to 97.2%. Questionnaires showed a significant positive impact of the treatment on OHRQoL (p < 0.001). The presence of mechanical lesions did not pose a higher risk for restoration failure (p = 0.78). The presence of chemical lesions showed a lower risk of restoration failure (p = 0.002). CONCLUSION: The use of minimally invasive, CAD/CAM nano-ceramic (composite) restorations in the restorative treatment of severely worn dentitions showed satisfactory results in the short term.
Assuntos
Qualidade de Vida , Desgaste dos Dentes , Adulto , Cerâmica , Desenho Assistido por Computador , Humanos , Pessoa de Meia-Idade , Estudos Prospectivos , Desgaste dos Dentes/etiologia , Desgaste dos Dentes/terapiaRESUMO
OBJECTIVES: This study reviewed the literature to identify in vitro approaches that have been used to simulate the mechanical degradation and fatigue of resin composite restorations. METHODS: A search for articles was carried out in 4 databases and included studies in which composite restorations were bonded to teeth and subject to cyclic loading. Articles were assessed for eligibility, and the following items were the extracted from the included studies: authors, country, year, materials tested, simulation device and details including load magnitude and frequency, number of cycles, type of antagonist, test medium, and temperature. Data were analyzed descriptively. RESULTS: The 49 studies included showed a high level of heterogeneity in methods, devices, and test parameters. Nineteen different simulation devices were used, applying loads varying between 30 and 2900 N, and frequencies varying between 0.4 and 12 Hz. The load and frequency used most often were ~ 50 N (63.3%) and 1.5-1.7 Hz (32.7%). The number of cycles varied between 10 K and 2.4 M, 1.2 M was the most prevalent (40.8%). The majority of studies combined cyclic loading with at least one additional aging method: static liquid storage, thermo-mechanical cycling applied simultaneously, and thermal cycling as a discrete aging step were the three most frequent methods. The overall evidence indicated reporting problems, and suggested a lack of clinical validation of the research methods used. SIGNIFICANCE: Validation studies, underlying clinical supporting data, and better reporting practices are needed for further improving research on the topic. Specific suggestions for future studies are provided.
Assuntos
Resinas Compostas , Restauração Dentária Permanente , Restauração Dentária Permanente/métodos , Análise do Estresse Dentário , Teste de Materiais , Cimentos de ResinaRESUMO
OBJECTIVES: To evaluate the 5.5-year performance of direct resin composite restorations, prescribed for patients with severe tooth wear, requiring full-mouth rehabilitation. METHODS: A convenience sample of 34 patients were recruited to a prospective trial between December 2010 and June 2013. The participants were provided 1269 full-mouth direct resin composite restorations (Clearfil AP-X) by 5 experienced operators, using the DSO-technique. Treatment resulted in an increase in the vertical dimension of occlusion (VDO). Failure was assessed at three levels. Frequencies of failure were analysed using Kaplan Meier survival curves and the effects of the relevant variables calculated with a multifactorial Cox regression (p < 0.05). RESULTS: Annual failure rates (for all levels of failure, 'Level 3- ') of ≤ 2.2% and ≤ 2.9% were respectively reported for the anterior and posterior restorations with a mean observation time of 62.4 months. The completion of an anterior restoration with the need for further appointments resulted in significantly more Level 2- & 3- failures. An evaluation of the performance of the premolar and posterior maxillary restorations showed significantly lowered risks of certain types of failures, compared to the molar and posterior mandibular restorations. CONCLUSIONS: At 5.5 years, 2.3% of the overall restorations displayed catastrophic, (Level 1) failures. Molar restorations, posterior mandibular restorations and the anterior restorations requiring two further sessions for completion, were associated with significantly higher risks for failure. CLINICAL SIGNIFICANCE: Direct resin composite can offer an acceptable medium-term option for the treatment of severe, generalized tooth wear; molar restorations may require higher maintenance.
Assuntos
Resinas Compostas , Desgaste dos Dentes , Falha de Restauração Dentária , Restauração Dentária Permanente , Humanos , Reabilitação Bucal , Estudos Prospectivos , Desgaste dos Dentes/terapiaRESUMO
OBJECTIVES: To investigate the effects of the level of pre-treatment tooth wear and increasing the VDO on the performance of direct resin composite restorations for the rehabilitation of pathological tooth wear. METHODS: Full-mouth (pre-treatment) grading was performed on digital greyscale scan records for 34 participants (35.3 ± 8.4 years) with signs of moderate-to-severe generalised tooth wear, using the Tooth Wear Evaluation System and the Basic Erosive Wear Examination. Each participant received full-mouth direct resin composite restorations, with increased VDO. The post-treatment increase in the VDO was determined. Recalls were planned after 1 month, and after 1, 3, and 5 years. Three 'levels' of restoration failure were described. The effects of the variables on the frequencies of restoration failure were calculated with a multivariable Cox regression, (p < 0.05). RESULTS: 1269 restorations were placed with a mean observation period of 62.4 months. Increasing the VDO by 1 mm significantly reduced the risks of all levels of anterior restoration failure (HR ≤ 0.62, p ≤ 0.025). A higher anterior BEWE surface score was associated with increased risks of Level 2- & 3- failures, (HR ≥ 1.29, p ≤ 0.019). Premolar restorations showed lower risks of Level 2- & 3- failure, compared to the molar restorations, (HR ≤ 0.5, p ≤ 0.005). CONCLUSION: Levels of pre-treatment wear and the applied change in the VDO significantly affected failure risk. CLINICAL RELEVANCE: Direct resin composite restorations for the rehabilitation of wear should be made as voluminous as possible, respecting the presenting biological, functional, and esthetic constraints.
Assuntos
Restauração Dentária Permanente , Desgaste dos Dentes , Resinas Compostas , Estética Dentária , Humanos , Desgaste dos Dentes/terapia , Dimensão VerticalRESUMO
BACKGROUND: The Tooth Wear Evaluation System (TWES) is a type of tooth wear index. To date, there is the lack of data comparing the reliability of the application of this index on gypsum cast records and digital greyscale intra-oral scan records. OBJECTIVES: A comparative evaluation between the use of gypsum cast records and digital greyscale intra-oral scan records with the reliability of tooth wear scoring using the TWES amongst a group of patients with tooth wear. METHODS: Records for 10 patients with moderate to severe tooth wear (TWES ≥ 2) were randomly selected from a larger clinical trial. TWES grading of the occlusal/incisal, buccal and palatal/lingual surfaces was performed to determine the levels of intra- and interobserver agreement. Intra-observer reproducibility was based on the findings of one examiner only. For the interobserver reproducibility, the findings of two examiners were considered. One set of models/ records were used per patient. Cohen's weighted kappa (κW ) was used to ascertain agreement between and within the observers. Comparison of agreement was performed using t tests (P < .05). RESULTS: For the scoring of the of the total occlusal/incisal surfaces, the overall levels of intra- and interobserver agreement were significantly higher using the gypsum cast records than with the digital greyscale intra-oral scan records, (P < .001) and (P < .001), respectively. For the overall buccal surfaces, only a significant difference was found in the intra-observer agreement using gypsum casts, (P = .013). For the palatal/lingual surfaces, a significant difference was only reported in the interobserver agreement using gypsum casts, (P = .043). At the occlusal/incisal surfaces, grading performed using gypsum casts, culminated in significantly higher TWES scores than with the use of the digital greyscale intra-oral scans (P < .001). At the buccal and palatal/lingual surfaces, significantly higher wear scores were obtained using digital greyscale intra-oral scan records (P < .009). CONCLUSIONS: The TWES can offer a reliable means for the scoring of wearing occlusal/incisal surfaces using gypsum casts. The reliability offered by digital greyscale intra-oral scans for consecutive scoring was in general, inferior.
Assuntos
Atrito Dentário , Desgaste dos Dentes , Sulfato de Cálcio , Humanos , Reprodutibilidade dos Testes , Desgaste dos Dentes/diagnóstico por imagemRESUMO
PURPOSE: To systematically review the literature to determine whether silane combined with adhesive application improves the repair bond strength of direct methacrylate-based resin composites in comparison to the use of an adhesive alone. MATERIALS AND METHODS: The literature up to December 2019 was searched through PubMed/MEDLINE, Scopus, and Lilacs databases with no publication year or language limits. From 676 potentially eligible studies, 81 were selected for full-text analysis, and 19 were included in the systematic review. Two reviewers independently selected the studies, extracted data, and assessed the risk of bias. Meta-analyses were conducted using a random effects model to calculate pooled mean differences between adhesive- vs silane-plus-adhesive surface treatments (global meta-analysis) and considering subgroup analyses (immediate and aged repair bond strengths and type of silane - hydrolyzed or nonhydrolyzed). Statistical analyses were performed using RevMan5.3 at a significance level of 5%. RESULTS: Global meta-analysis showed that the use of silane prior to adhesive application produced significantly higher repair bond strengths (p=0.003). A higher mean difference (effect size: 7.30, 95% CI: 2.91-17.51) between groups was found when nonhydrolyzed silanes were used. The heterogeneity was high. Studies scored between medium and high risk of bias. CONCLUSION: An additional silane application step could increase the repair bond strength of methacrylate-based resin composites.
Assuntos
Colagem Dentária , Silanos , Cimentos Dentários , Teste de Materiais , Cimentos de ResinaRESUMO
OBJECTIVE: To investigate the impact of an e-training resource with the consistency of tooth wear scoring using the Basic Erosive Wear Examination (BEWE). METHODS: Gold standard (GS) BEWE scores were attained from a trained examiner using the photographic and dental cast records for three conveniently selected cases representing low, medium and severe tooth wear. Four successive cohorts of first year post-graduate students, (nâ¯=â¯76, mean age, 35.4 years) undertook a training exercise. Each was given written guidance on using the BEWE. Following e-training, scoring was repeated, and the results expressed as mean, confidence Intervals, (95% ci) and p-values (values <0.05 were considered statistically significant). RESULTS: The e-training resulted in a mean improvement in the agreement with the GS score by 15.6% and 15.3%, using the records of the medium and severe tooth wear cases, (cumulative BEWE scores of 13 and 15 respectively). Post-training reductions were reported, with the mean number of disagreements with the GS and the mean change in the size of disagreement with the GS scores with records for the medium and severe cases (pâ¯=â¯0.001 and pâ¯<â¯0.001). No significant difference was revealed for the low wear case. CONCLUSION: e-training resulted in significant improvements in scoring BEWE, compared to the gold standard. CLINICAL RELEVANCE: Online training resources can help provide training with the BEWE.