RESUMO
Duplex stainless steels are being used on applications that require high corrosion resistance and excellent mechanical properties, such as the naval and oil-gas exploration industry. The components employed in these industries are usually obtained by machining; however, these alloys have low machinability when compared to conventional stainless steels, usually requiring the employment of tool coatings. In the present work, a comparative study of TiAlSiN coating performance obtained by these two techniques in the milling of duplex stainless-steel alloy LDX 2101 was carried out. These coatings were obtained by the conventional direct current magnetron sputtering (dc MS) and the novel high power impulse magnetron sputtering (HiPIMS). The coatings were analyzed and characterized, determining mechanical properties for both coatings, registering slightly higher mechanical properties for the HiPIMS-obtained coating. Machining tests were performed with varying cutting length and feed-rate, while maintaining constant values for axial and radial depth of cut and cutting speed. The surface roughness of the material after machining was assessed, as well as the wear sustained by each of the tool types, identifying the wear mechanisms and behavior of these tools, as well as registering the flank wear values presented for each of the tested tools. The HiPIMS-obtained coating exhibited a very similar behavior when compared to the other, producing similar surface roughness quality. However, the HiPIMS coating exhibited less wear for higher cutting lengths, proving to be a better choice in this case, especially regarding tool life.
RESUMO
Machining processes remain an unavoidable technique in the production of high-precision parts. Tool behavior is of the utmost importance in machining productivity and costs. Tool performance can be assessed by the roughness left on the machined surfaces, as well as of the forces developed during the process. There are various techniques to determine these cutting forces, such as cutting force prediction or measurement, using dynamometers and other sensor systems. This technique has often been used by numerous researchers in this area. This paper aims to give a review of the different techniques and devices for measuring the forces developed for machining processes, allowing a quick perception of the advantages and limitations of each technique, through the literature research carried out, using recently published works.
RESUMO
AIMS: The purpose of this study was to compare the effects of hamstring eccentric (NHE) strength training versus sprint training programmed as complements to regular soccer practice, on sprint performance and its mechanical underpinnings, as well as biceps femoris long head (BFlh) architecture. METHODS: In this prospective interventional control study, sprint performance, sprint mechanics and BFlh architecture variables were compared before versus after six weeks of training during the first six preseason weeks, and between three different random match-pair groups of soccer players: "Soccer group" (n = 10), "Nordic group" (n = 12) and "Sprint group" (n = 10). RESULTS: For sprint performance and mechanics, small to large pre-post improvements were reported in "Sprint group" (except maximal running velocity), whereas only trivial to small negative changes were reported in "Soccer group" and "Nordic group". For BFlh architecture variables, "Sprint" group showed moderate increase in fascicle length compared to smaller augment for the "Nordic" group with trivial changes for "Soccer group". Only "Nordic" group presented small increases at pennation angle. CONCLUSIONS: The results suggest that sprint training was superior to NHE in order to increase BFlh fascicle length although only the sprint training was able to both provide a preventive stimulus (increase fascicle length) and at the same time improve both sprint performance and mechanics. Further studies with advanced imaging techniques are needed to confirm the validity of the findings.
