The Resolution of Kaplan Fiber Injuries Is Observed in a Majority of Cases at 9 Months After Acute Primary Anterior Cruciate Ligament Reconstruction: A Radiological Study.

BACKGROUND: The natural history of Kaplan fiber (KF) injuries after acute primary anterior cruciate ligament (ACL) reconstruction (ACLR) remains unknown. PURPOSE/HYPOTHESIS: The purpose of this study was to evaluate the temporal change in the magnetic resonance imaging (MRI) appearance of the KF complex after acute primary ACLR. It was hypothesized that KF injuries would resolve with time. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: A retrospective MRI analysis was conducted on 89 patients with ACL-injured knees to assess the change in the radiological appearance of KFs after primary ACLR. Patients who had undergone index MRI and ACLR within 90 days of the injury and further MRI at 9 months after surgery were included. Diagnostic criteria to identify radiological evidence of a KF injury and its subsequent resolution were applied, including the presence of high signal intensity on fluid-sensitive sequences, which is indicative of a pathological process radiologically. The proximity of KFs to the femoral cortical suspensory device (CSD) was noted on MRI scans and quantified in millimeters. RESULTS: A KF injury was identified in 30.3% (27/89) of patients, with isolated high signal intensity observed in an additional 18.0% (16/89). At 9 months, MRI evidence of the reconstitution of the KF complex was found in 51.9% (14/27) of patients, with persistent discontinuity in the remaining patients (13/27). All patients (16/16) with isolated high signal intensity had complete resolution on repeat MRI scans. KF thickening was observed in 26.1% (12/46) of patients with previously healthy KFs and in 25.0% (4/16) with isolated high signal intensity. The CSD was positioned in close proximity (≤6 mm) to the center of the KF attachment in 61.8% (55/89) of patients, and this was associated with increased rates of KF thickening. CONCLUSION: The KF injury resolved radiologically in over half of the patients at 9 months after acute primary ACLR. High signal intensity in the region of the KFs on index MRI scans resolved in all cases, with evidence of residual KF thickening in only one-quarter of cases on repeat MRI scans, equivalent to the rate in those with healthy KFs. As such, it is not advisable to use high signal intensity on preoperative MRI scans as the sole criterion for the diagnosis of a KF injury. The position of the CSD after ACLR was intimately related to the KF attachment in the majority of patients, which was associated with KF thickening on postoperative MRI scans.

Redesigning Metal Interference Screws Can Improve Ease of Insertion While Maintaining Fixation of Soft-Tissue Anterior Cruciate Ligament Reconstruction Grafts.

PURPOSE: To compare the fixation strength and loads on insertion of a titanium alloy interference screw with a modified tip against a conventional titanium interference screw. METHODS: Slippage of bovine digital extensor tendons (as substitutes for human tendon grafts) under cyclic loading and interference fixation strength under a pullout test were recorded in 10 cadaveric knees, with 2 tunnels drilled in each femur and tibia to provide pair-wise comparisons between the modified-tip screw (MS) and conventional screw (CS). To analyze screw insertion, 10 surgeons blindly inserted pairs of the MS and CS into bone-substitute blocks (with polyester shoelaces as graft substitutes), with insertion loads measured using a force/torque sensor. RESULTS: No differences were found between the MS and CS either in graft slippage from the femur (P = .661) or tibia (P = .950) or in ultimate load to failure from the femur (P = .952) or tibia (P = .126). On insertion, the MS required less axial force application (78 ± 38 N, P = .001) and fewer attempted turns (2 ± 1, P < .001) to engage with the bone tunnel than the CS (99 ± 43 N and 4 ± 4, respectively). In 90% of the paired insertion tests, the screw identified by the surgeon as being easier to initially insert was the MS. CONCLUSIONS: The MS was found to be easier to engage with the bone tunnel and initially insert than the CS while still achieving similar immediate postsurgical fixation strength. CLINICAL RELEVANCE: The study shows that screw designs can be improved to ease insertion into a bone tunnel, which should reduce any likelihood of ligament reconstruction graft damage.

The Role of Fibers Within the Tibial Attachment of the Anterior Cruciate Ligament in Restraining Tibial Displacement.

PURPOSE: To evaluate the load-bearing functions of the fibers of the anterior cruciate ligament (ACL) tibial attachment in restraining tibial anterior translation, internal rotation, and combined anterior and internal rotation laxities in a simulated pivot-shift test. METHODS: Twelve knees were tested using a robot. Laxities tested were: anterior tibial translation (ATT), internal rotation (IR), and coupled translations and rotations during a simulated pivot-shift. The kinematics of the intact knee was replayed after sequentially transecting 9 segments of the ACL attachment and fibers entering the lateral gutter, measuring their contributions to restraining laxity. The center of effort (COE) of the ACL force transmitted to the tibia was calculated. A blinded anatomic analysis identified the densest fiber area in the attachment of the ACL and thus its centroid (center of area). This centroid was compared with the biomechanical COE. RESULTS: The anteromedial tibial fibers were the primary restraint of ATT (84% across 0° to 90° flexion) and IR (61%) during isolated and coupled displacements, except for the pivot-shift and ATT in extension. The lateral gutter resisted 28% of IR at 90° flexion. The anteromedial fibers showed significantly greater restraint of simulated pivot-shift rotations than the central and posterior fibers (P < .05). No significant differences (all <2 mm) were found between the anatomic centroid of the C-shaped attachment and the COE under most loadings. CONCLUSIONS: The peripheral anteromedial fibers were the most important area of the ACL tibial attachment in the restraint of tibial anterior translation and internal rotation during isolated and coupled displacements. These mechanical results matched the C-shaped anteromedial attachment of the dense collagen fibers of the ACL. CLINICAL RELEVANCE: The most important fibers in restraining tibial displacements attach to the C-shaped anteromedial area of the native ACL tibial attachment. This finding provides an objective rationale for ACL graft position to enable it to reproduce the physiological path of load transmission for tibial restraint.

Biomechanical Assessment of a Distally Fixed Lateral Extra-articular Augmentation Procedure in the Treatment of Anterolateral Rotational Laxity of the Knee.

BACKGROUND: Most lateral extra-articular tenodesis (LET) procedures rely on passing a strip of the iliotibial band (ITB) under the fibular (lateral) collateral ligament and fixing it proximally to the femur. The Ellison procedure is a distally fixed lateral extra-articular augmentation procedure with no proximal fixation of the ITB. It has the potential advantages of maintaining a dynamic element of control of knee rotation and avoiding the possibility of overconstraint. HYPOTHESIS: The modified Ellison procedure would restore native knee kinematics after sectioning of the anterolateral capsule, and closure of the ITB defect would decrease rotational laxity of the knee. STUDY DESIGN: Controlled laboratory study. METHODS: Twelve fresh-frozen cadaveric knees were tested in a 6 degrees of freedom robotic system through 0° to 90° of knee flexion to assess anteroposterior, internal rotation (IR), and external rotation laxities. A simulated pivot shift (SPS) was performed at 0°, 15°, 30°, and 45° of flexion. Kinematic testing was performed in the intact knee and anterolateral capsule-injured knee and after the modified Ellison procedure, with and without closure of the ITB defect. A novel pulley system was used to load the ITB at 30 N for all testing states. Statistical analysis used repeated measures analyses of variance and paired t tests with Bonferroni adjustments. RESULTS: Sectioning of the anterolateral capsule increased anterior drawer and IR during isolated displacement and with the SPS (mean increase, 2° of IR; P < .05). The modified Ellison procedure reduced both isolated and coupled IR as compared with the sectioned state (P < .05). During isolated testing, IR was reduced close to that of the intact state with the modified Ellison procedure, except at 30° of knee flexion, when it was slightly overconstrained. During the SPS, IR with the closed modified Ellison was less than that in the intact state at 15° and 30° of flexion. No significant differences in knee kinematics were seen between the ITB defect open and closed. CONCLUSION: A distally fixed lateral augmentation procedure can closely restore knee laxities to native values in an anterolateral capsule-sectioned knee. Although the modified Ellison did result in overconstraint to isolated IR and coupled IR during SPS, this occurred only in the early range of knee flexion. Closure of the ITB defect had no effect on knee kinematics. CLINICAL RELEVANCE: A distally fixed lateral extra-articular augmentation procedure provides an alternative to a proximally fixed LET and can reduce anterolateral laxity in the anterolateral capsule-injured knee and restore kinematics close to the intact state.

ACL graft compression: a method to allow reduced tunnel sizes in ACL reconstruction.

PURPOSE: A common problem during ACL reconstruction is asymmetry of proximal-distal graft diameter leading to tunnel upsizing and graft-tunnel mismatch. Compression downsizing provides a graft of uniform size, allowing easy passage into a smaller tunnel. The purpose of this study was to quantify the graft compression technique and its effects on graft biomechanics and stability. It was hypothesised that compression downsizing would significantly reduce cross-sectional area (CSA); that no significant changes in graft biomechanics would occur; graft fixation stability would be improved. METHOD: Sixty-eight non-irradiated peroneus longus (PL) tendons were investigated. Twenty were halved and paired into ten four-strand grafts, 20 strands were compressed by 0.5-1 mm diameter and changes in CSA recorded using an alginate mould technique. The following properties were compared with 20 control strands: cyclic strain when loaded 70-220 N for 1000 cycles; stiffness; ultimate tensile load and stress; Young's modulus. 24 PL tendons were quadrupled into grafts, 12 were compressed and all 24 were submerged in Ringer's solution at 37 °C and the CSA recorded over 12 h. Twelve compressed and 12 control quadrupled grafts were mounted in porcine femurs, placed in Ringer's solution for 12 h at 37 °C and graft displacement at the bone tunnel aperture recorded under cyclic loading. RESULTS: Mean decreases in CSA of 31% under a stress of 471 kPa and 21% under a stress of 447 kPa were observed for doubled and quadrupled grafts, respectively. Compressed grafts re-expanded by 19% over 12 h compared to 2% for controls. No significant differences were observed between compressed and control grafts in the biomechanical properties and graft stability; mean cyclic displacements were 0.3 mm for both groups. CONCLUSIONS: No detrimental biomechanical effects of graft compression on allograft PL tendons were observed. Following compression, the grafts significantly increased in size during in vitro joint simulation. No significant difference was observed in graft stability between groups. Graft compression did not cause adverse mechanical effects in vitro. Smaller tunnels for compressed grafts reduce bone loss and ease anatomical placement.

Biomechanical properties of bovine tendon xenografts treated with a modern processing method.

Xenograft tendons have been used in few human studies, with variable results. With the advent of novel tissue processing techniques, which may mitigate against an immune-mediated rejection response without adversely affecting mechanical properties, there may now be a clinical role for xenograft tendons, particularly in knee ligament reconstruction. We hypothesize that 'BioCleanse®' processed bovine extensor digitorum medialis (EDM) tendons exhibit favorable time-zero pre-implantation biomechanical characteristics when compared to both unprocessed bovine EDM tendons and BioCleanse® processed human cadaveric allograft tibialis anterior tendons. In this in vitro case controlled laboratory study, three groups of tendons underwent a 5-stage static loading test protocol: 15 BioCleanse® bovine (BCB), 15 fresh frozen unprocessed bovine (FFB), and 12 BioCleanse® human allograft (BCA) tendons. Cross-sectional area of the grafts was measured using an alginate molding technique, and tendons were mounted within an Instron® 5565 Materials Testing System using cryogenic clamps. BCB tendons displayed a higher ultimate tensile stress (p<0.05), with equivalent ultimate failure load, creep, and modulus of elasticity when compared to the FFB tendons (p>0.05). BCB tendons had an equivalent cross-sectional area to the BCA tendons (p>0.05) whilst exhibiting a greater failure load, ultimate tensile stress, less creep and a higher modulus of elasticity (p<0.05). The BioCleanse® process did not adversely affect the time-zero biomechanical properties of bovine xenograft EDM tendons. BioCleanse® processed bovine xenograft EDM tendons exhibited superior biomechanical characteristics when compared with BioCleanse® processed allograft tibialis anterior tendons. These findings support further investigation of xenograft tendons in orthopedic soft tissue reconstructive surgery.

Lateral soft-tissue structures contribute to cruciate-retaining total knee arthroplasty stability.

Little information is available to surgeons regarding how the lateral structures prevent instability in the replaced knee. The aim of this study was to quantify the lateral soft-tissue contributions to stability following cruciate-retaining total knee arthroplasty (CR TKA). Nine cadaveric knees were tested in a robotic system at full extension, 30°, 60°, and 90° flexion angles. In both native and CR implanted states, ±90 N anterior-posterior force, ±8 Nm varus-valgus, and ±5 Nm internal-external torque were applied. The anterolateral structures (ALS, including the iliotibial band), the lateral collateral ligament (LCL), the popliteus tendon complex (Pop T), and the posterior cruciate ligament (PCL) were transected and their relative contributions to stabilizing the applied loads were quantified. The LCL was found to be the primary restraint to varus laxity (an average 56% across all flexion angles), and was significant in internal-external rotational stability (28% and 26%, respectively) and anterior drawer (16%). The ALS restrained 25% of internal rotation, while the PCL was significant in posterior drawer only at 60° and 90° flexion. The Pop T was not found to be significant in any tests. Therefore, the LCL was confirmed as the major lateral structure in CR TKA stability throughout the arc of flexion and deficiency could present a complex rotational laxity that cannot be overcome by the other passive lateral structures or the PCL. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:1902-1909, 2017.

Biomechanical comparison of graft structures in anterior cruciate ligament reconstruction.

PURPOSE: Double-bundle (DB) anterior cruciate ligament (ACL) reconstruction may offer kinematic restoration superior to anatomic single bundle (SB), but it remains technically challenging. The femoral attachment site has the most effect on ACL graft isometry, so a simplified three-socket (3S) construct which still uses two sockets to cover the femoral ACL attachment is attractive. It was hypothesised that ACL reconstruction using three- and four-socket techniques would more closely restore native knee kinematics compared to anatomic two-socket (SB) surgery. METHODS: Nine cadaveric knees were used to evaluate the kinematics of ACL-intact, ACL-deficient, anatomic SB, three-socket, and DB arthroscopic ACL reconstructions. Suspensory fixation was used, and grafts were tensioned to match the anterior draw of the intact knee at 20°. A six-degree-of-freedom robotic system measured knee laxity under 90 N anterior tibial force and rotational laxity under 5 N-m torque. Combined moments were applied to simulate the pivot-shift subluxation: 4 N-m internal rotation and 8 N-m valgus. RESULTS: Significant differences between reconstructions were not found during anterior tibial loading, apart from SB being more lax than DB at 60° flexion. All reconstructions produced comparable laxity to the intact state, apart from SB at 60°. Significant differences between reconstructions were not found at any flexion angle during tibial internal/external applied torques. Under combined loading, DB produced significantly less laxity than SB constructs apart from anterior tibial translation at 0° and internal rotation at 45°. 3S and DB were comparable to the native knee throughout. CONCLUSION: Although 3S restored laxities to a similar extent to DB, significant superiority over SB surgery was not observed. Although statistically significant differences were found between SB and DB surgery during anterior tibial and simulated pivot-shift loading, both remained similar to the native knee. The clinical relevance is that this study did not support an ACL graft construct more complex than an anatomic single bundle.

Paediatric ACL repair reinforced with temporary internal bracing.

PURPOSE: Instability following non-operative treatment of anterior cruciate ligament (ACL) rupture in young children frequently results in secondary chondral and/or meniscal injuries. Therefore, many contemporary surgeons advocate ACL reconstruction in these patients, despite the challenges posed by peri-articular physes and the high early failure rate. We report a novel management approach, comprising direct ACL repair reinforced by a temporary internal brace in three children. METHODS: Two patients (aged 5 and 6 years) with complete proximal ACL ruptures and a third (aged seven) with an associated tibial spine avulsion underwent direct surgical repair, supplemented with an internal brace that was removed after 3 months. RESULTS: Second-look arthroscopy, examination and imaging at 3 months confirmed knee stability and complete ACL healing in all cases. Normal activities were resumed at 4 months, and excellent objective measures of function, without limb growth disturbance, were noted beyond 2 years. CONCLUSION: ACL repair in young children using this technique negates the requirement and potential morbidity of graft harvest and demonstrates the potential for excellent outcome as an attractive alternative to ACL reconstruction, where an adequate ACL remnant permits direct repair. LEVEL OF EVIDENCE: IV.

Combined anterolateral ligament and anatomic anterior cruciate ligament reconstruction of the knee.

Although anatomic anterior cruciate ligament (ACL) reconstruction is established for the surgical treatment of anterolateral knee instability, there remains a significant cohort of patients who continue to experience post-operative instability. Recent advances in our understanding of the anatomic, biomechanical and radiological characteristics of the native anterolateral ligament (ALL) of the knee have led to a resurgent interest in reconstruction of this structure as part of the management of knee instability. This technical note describes our readily reproducible combined minimally invasive technique to reconstruct both the ACL and ALL anatomically using autologous semitendinosus and gracilis grafts. This method of ALL reconstruction can be easily integrated with all-inside ACL reconstruction, requiring minimal additional operative time, equipment and expertise. Level of evidence V.

TransMedial All-Inside Posterior Cruciate Ligament Reconstruction Using a Reinforced Tibial Inlay Graft.

Surgical reconstruction of the posterior cruciate ligament (PCL) is technically demanding. Potential challenges include visualization of the tibial footprint and drilling of the tibial tunnel without damaging posterior neurovascular structures, as well as graft selection, deployment, tensioning, and fixation. We present a novel TransMedial all-inside arthroscopic technique (technique designed by A. J. Wilson with support from Arthrex) using a single hamstring tendon graft, fixed with adjustable cortical suspensory devices. The technique simplifies the difficult steps encountered during PCL reconstruction and is safe and reproducible. All arthroscopic viewing is accomplished from the lateral portal, and femoral socket preparation is performed from the medial side with specially contoured instruments, which allow accurate marking, measuring, and anatomic positioning of the graft. The quadrupled semitendinosus graft can be augmented with composite polymer tape for increased strength and initial stability. We use outside-in drilling to create retrograde femoral and tibial sockets. Cortical suspensory fixation on the tibial side can be supplemented with anchor fixation. We use an arthroscopic tibial inlay technique that better approximates native knee anatomy. This also avoids the "killer turn," a problem seen in transtibial PCL reconstruction techniques, which theoretically induces graft laxity due to abrasion with cyclic loading. This technique can be further adapted to allow a modified double-bundle or TriLink graft (technique designed by A. J. Wilson with support from Arthrex.).

Parastomal hernias as the predominant stoma complication after laparoscopic colorectal surgery.

Many colorectal procedures can be performed laparoscopically and frequently involve the formation of a stoma. This study aims to demonstrate whether there is an association between stoma complications and the operative technique: laparoscopic or open. A review was conducted of all patients undergoing stoma formation at a single center throughout 2009. Forty-four had a stoma formed after an open procedure and 33 using laparoscopic technique alone. The most common stoma complication was parastomal hernias; these occurred after 18% of laparoscopic compared with 2% after open procedures (P = 0.04). The highest rate of parastomal hernia was seen when the resected specimen was removed from the site that was later used to create a stoma (60%). This study has suggested that the use of laparoscopic surgery may influence the rate of stoma complications. One potential method of reducing the incidence of parastomal hernias is to remove the resected specimen through a separate incision.