Chemistry and Dynamics of Supercritical Carbon Dioxide and Methane in the Slit Pores of Layered Silicates.

ConspectusIn the mid 2010s, high-pressure diffraction and spectroscopic tools opened a window into the molecular-scale behavior of fluids under the conditions of many CO2 sequestration and shale/tight gas reservoirs, conditions where CO2 and CH4 are present as variably wet supercritical fluids. Integrating high-pressure spectroscopy and diffraction with molecular modeling has revealed much about the ways that supercritical CO2 and CH4 behave in reservoir components, particularly in the slit-shaped micro- and mesopores of layered silicates (phyllosilicates) abundant in caprocks and shales. This Account summarizes how supercritical CO2 and CH4 behave in the slit pores of swelling phyllosilicates as functions of the H2O activity, framework structural features, and charge-balancing cation properties at 90 bar and 323 K, conditions similar to a reservoir at ∼1 km depth. Slit pores containing cations with large radii, low hydration energy, and large polarizability readily interact with CO2, allowing CO2 and H2O to adsorb and coexist in these interlayer pores over a wide range of fluid humidities. In contrast, cations with small radii, high hydration energy, and low polarizability weakly interact with CO2, leading to reduced CO2 uptake and a tendency to exclude CO2 from interlayers when H2O is abundant. The reorientation dynamics of confined CO2 depends on the interlayer pore height, which is strongly influenced by the cation properties, framework properties, and fluid humidity. The silicate structural framework also influences CO2 uptake and behavior; for example, smectites with increasing F-for-OH substitution in the framework take up greater quantities of CO2. Reactions that trap CO2 in carbonate phases have been observed in thin H2O films near smectite surfaces, including a dissolution-reprecipitation mechanism when the edge surface area is large and an ion exchange-precipitation mechanism when the interlayer cation can form a highly insoluble carbonate. In contrast, supercritical CH4 does not readily associate with cations, does not react with smectites, and is only incorporated into interlayer slit mesopores when (i) the pore has a z-dimension large enough to accommodate CH4, (ii) the smectite has low charge, and (iii) the H2O activity is low. The adsorption and displacement of CH4 by CO2 and vice versa have been studied on the molecular scale in one shale, but opportunities remain to examine behavioral details in this more complicated, slit-pore inclusive system.

Interlayer Cation Polarizability Affects Supercritical Carbon Dioxide Adsorption by Swelling Clays.

Several strategies for mitigating the build-up of atmospheric carbon dioxide (CO2) bring wet supercritical CO2 (scCO2) in contact with phyllosilicates such as illites and smectites. While some work has examined the role of the charge-balancing cation and smectite framework features on CO2/smectite interactions, to our knowledge no one has examined how the polarizability of the charge-balancing cation influences these behaviors. In this paper, the scCO2 adsorption properties of Pb2+, Rb+, and NH4+ saturated smectite clays at variable relative humidity are studied by integrating in situ high-pressure X-ray diffraction (XRD), infrared spectroscopic titrations, and magic angle spinning nuclear magnetic resonance (MAS NMR) methods. The results are combined with previously published data for Na+, Cs+, and Ca2+ saturated versions of the same smectites to isolate the roles of the charge-balancing cations and perform two independent tests of the role of charge-balancing cation polarizability in determining the interlayer fluid properties and smectite expansion. Independent correlations developed for (i) San Bernardino hectorite (SHCa-1) and (ii) Wyoming montmorillonite (SWy-2) both show that cation polarizability is important in predicting the interlayer composition (mol% CO2 in the interlayer fluid and CO2/cation ratio in interlayer) and the expansion behavior for smectites in contact with wet and dry scCO2. In particular, this study shows that the charge-balancing cation polarizability is the most important cation-associated parameter in determining the expansion of the trioctahedral smectite, hectorite, when in contact with dry scCO2. While both independent tests show that cation polarizability is an important factor in smectite-scCO2 systems, the correlations for hectorite are different from those determined for montmorillonite. The root of these differences is likely associated with the roles of the smectite framework on adsorption, warranting follow-up studies with a larger number of unique smectite frameworks. Overall, the results show that the polarizability of the charge-balancing cation should be considered when preparing smectite clays (or industrial processes involving smectites) to capture CO2 and in predicting the behavior of caprocks over time.

In situ imaging of amorphous intermediates during brucite carbonation in supercritical CO2.

Progress in understanding crystallization pathways depends on the ability to unravel relationships between intermediates and final crystalline products at the nanoscale, which is a particular challenge at elevated pressure and temperature. Here we exploit a high-pressure atomic force microscope to directly visualize brucite carbonation in water-bearing supercritical carbon dioxide (scCO2) at 90 bar and 50 °C. On introduction of water-saturated scCO2, in situ visualization revealed initial dissolution followed by nanoparticle nucleation consistent with amorphous magnesium carbonate (AMC) on the surface. This is followed by growth of nesquehonite (MgCO3·3H2O) crystallites. In situ imaging provided direct evidence that the AMC intermediate acts as a seed for crystallization of nesquehonite. In situ infrared and thermogravimetric-mass spectrometry indicate that the stoichiometry of AMC is MgCO3·xH2O (x = 0.5-1.0), while its structure is indicated to be hydromagnesite-like according to density functional theory and X-ray pair distribution function analysis. Our findings thus provide insight for understanding the stability, lifetime and role of amorphous intermediates in natural and synthetic systems.

Integrated atomic force microscopy and x-ray irradiation for in situ characterization of radiation-induced processes.

Understanding radiation-induced chemical and physical transformations at material interfaces is important across diverse fields, but experimental approaches are often limited to either ex situ observations or in situ electron microscopy or synchrotron-based methods, in which cases the radiation type and dose are inextricably tied to the imaging basis itself. In this work, we overcome this limitation by demonstrating integration of an x-ray source with an atomic force microscope to directly monitor radiolytically driven interfacial chemistry at the nanoscale. We illustrate the value of in situ observations by examining effects of radiolysis on material adhesion forces in aqueous solution as well as examining the production of alkali nitrates at the interface between an alkali halide crystal surface and air. For the examined salt-air interface, direct visualization under flexible experimental conditions greatly extends prior observations by enabling the transformation process to be followed comprehensively from source-to-sink with mass balance quantitation. Our novel rad-atomic force microscope opens doors into understanding the dynamics of radiolytically driven mass transfer and surface alteration at the nanoscale in real-time.

Thin Water Films Enable Low-Temperature Magnesite Growth Under Conditions Relevant to Geologic Carbon Sequestration.

Injecting supercritical CO2 (scCO2) into basalt formations for long-term storage is a promising strategy for mitigating CO2 emissions. Mineral carbonation can result in permanent entrapment of CO2; however, carbonation kinetics in thin H2O films in humidified scCO2 is not well understood. We investigated forsterite (Mg2SiO4) carbonation to magnesite (MgCO3) via amorphous magnesium carbonate (AMC; MgCO3·xH2O, 0.5 < x < 1), with the goal to establish the fundamental controls on magnesite growth rates at low H2O activity and temperature. Experiments were conducted at 25, 40, and 50 °C in 90 bar CO2 with a H2O film thickness on forsterite that averaged 1.78 ± 0.05 monolayers. In situ infrared spectroscopy was used to monitor forsterite dissolution and the growth of AMC, magnesite, and amorphous SiO2 as a function of time. Geochemical kinetic modeling showed that magnesite was supersaturated by 2 to 3 orders of magnitude and grew according to a zero-order rate law. The results indicate that the main drivers for magnesite growth are sustained high supersaturation coupled with low H2O activity, a combination of thermodynamic conditions not attainable in bulk aqueous solution. This improved understanding of reaction kinetics can inform subsurface reactive transport models for better predictions of CO2 fate and transport.

The controlling role of atmosphere in dawsonite versus gibbsite precipitation from tetrahedral aluminate species.

In highly alkaline solution, aluminum speciates as the tetrahedrally coordinated aluminate monomer, Al(OH)4- and/or dimer Al2O(OH)62-, yet precipitates as octahedrally coordinated gibbsite (Al(OH)3). This tetrahedral to octahedral transformation governs Al precipitation, which is crucial to worldwide aluminum (Al) production, and to the retrieval and processing of Al-containing caustic high-level radioactive wastes. Despite its significance, the transformation pathway remains unknown. Here we explore the roles of atmospheric water and carbon dioxide in mediating the transformation of the tetrahedrally coordinated potassium aluminate dimer salt (K2Al2O(OH)6) to gibbsite versus potassium dawsonite (KAl(CO3)(OH)2). A combination of in situ attenuated total reflection infrared spectroscopy, ex situ micro X-ray diffraction, and multivariate curve resolution-alternating least squares chemometrics analysis reveals that humidity plays a key role in the transformation by limiting the amount of alkalinity neutralization by dissolved CO2. Lower humidity favors higher alkalinity and incorporation of carbonate species in the final Al product to form KAl(CO3)(OH)2. Higher humidity enables more acid generation that destabilizes dawsonite and favors gibbsite as the solubility limiting phase. This indicates that the transition from tetra- to octahedrally coordinated Al does not have to occur in bulk solution, as has often been hypothesized, but may instead occur in thin water films present on mineral surfaces in humid environments. Our findings suggest that phase selection can be controlled by humidity, which could enable new pathways to Al transformations useful to the Al processing industry, as well as improved understanding of phases that appear in caustic Al-bearing solutions exposed to atmospheric conditions.

Synergistic Coupling of CO2 and H2O during Expansion of Clays in Supercritical CO2-CH4 Fluid Mixtures.

We used IR and XRD, with supporting theoretical calculations, to investigate the swelling behavior of Na+-, NH4+-, and Cs+-montmorillonites (SWy-2) in supercritical fluid mixtures of H2O, CO2, and CH4. Building on our prior work with Na-clay that demonstrated that H2O facilitated CO2 intercalation at relatively low RH, here we show that increasing CO2/CH4 ratios promote H2O intercalation and swelling of the Na-clay at progressively lower RH. In contrast to the Na-clay, CO2 intercalated and expanded the Cs-clay even in the absence of H2O, while increasing fluid CO2/CH4 ratios inhibited H2O intercalation. The NH4-clay displayed intermediate behavior. By comparing changes in the HOH bending vibration of H2O intercalated in the Cs-, NH4-, and Na-clays, we posit that CO2 facilitated expansion of the Na-clay by participating in outer-sphere solvation of Na+ and by disrupting the H-bond network of intercalated H2O. In no case did the pure CH4 fluid induce expansion. Our experimental data can benchmark modeling studies aimed at predicting clay expansion in humidified fluids with varying ratios of CO2 and CH4 in real reservoir systems with implications for enhanced hydrocarbon recovery and CO2 storage in subsurface environments.

Self-similar mesocrystals form via interface-driven nucleation and assembly.

Crystallization by particle attachment (CPA) is a frequently occurring mechanism of colloidal crystallization that results in hierarchical morphologies1-4. CPA has been exploited to create nanomaterials with unusual properties4-6 and is implicated in the development of complex mineral textures1,7. Oriented attachment7,8-a form of CPA in which particles align along specific crystallographic directions-produces mesocrystals that diffract as single crystals do, although the constituent particles are still discernible2,9. The conventional view of CPA is that nucleation provides a supply of particles that aggregate via Brownian motion biased by attractive interparticle potentials1,9-12. However, mesocrystals often exhibit regular morphologies and uniform sizes. Although many crystal systems form mesocrystals1-9 and individual attachment events have been directly visualized10, how random attachment events lead to well defined, self-similar morphologies remains unknown, as does the role of surface-bound ligands, which are ubiquitous in nanoparticle systems3,9,11. Attempts to understand mesocrystal formation are further complicated in many systems by the presence of precursor nanoparticles with a phase distinct from that of the bulk1,13,14. Some studies propose that such particles convert before attachment15, whereas others attribute conversion to the attachment process itself16 and yet others conclude that transformation occurs after the mesocrystals exceed a characteristic size14,17. Here we investigate mesocrystal formation by iron oxides, which are important colloidal phases in natural environments18,19 and classic examples of systems forming ubiquitous precursor phases and undergoing CPA accompanied by phase transformations15,19-21. Combining in situ transmission electron microscopy (TEM) at 80 degrees Celsius with 'freeze-and-look' TEM, we tracked the formation of haematite (Hm) mesocrystals in the presence of oxalate (Ox), which is abundant in soils, where iron oxides are common. We find that isolated Hm particles rarely appear, but once formed, interfacial gradients at the Ox-covered surfaces drive Hm particles to nucleate repeatedly about two nanometres from the surfaces, to which they then attach, thereby generating mesocrystals. Comparison to natural and synthetic systems suggests that interface-driven pathways are widespread.

Direct visualization of radiation-induced transformations at alkali halide-air interfaces.

Radiation driven reactions at mineral/air interfaces are important to the chemistry of the atmosphere, but experimental constraints (e.g. simultaneous irradiation, in situ observation, and environmental control) leave process understanding incomplete. Using a custom atomic force microscope equipped with an integrated X-ray source, transformation of potassium bromide surfaces to potassium nitrate by air radiolysis species was followed directly in situ at the nanoscale. Radiolysis initiates dynamic step edge dissolution, surface composition evolution, and ultimately nucleation and heteroepitaxial growth of potassium nitrate crystallites mediated by surface diffusion at rates controlled by adsorbed water. In contrast to in situ electron microscopy and synchrotron-based imaging techniques where high radiation doses are intrinsic, our approach illustrates the value of decoupling irradiation and the basis of observation.

Low temperature and limited water activity reveal a pathway to magnesite via amorphous magnesium carbonate.

Forsterite carbonated in thin H2O films to magnesite via amorphous magnesium carbonate during reaction with H2O-bearing liquid CO2 at 25 °C. This novel reaction pathway contrasts with previous studies that were carried out at higher H2O activity and temperature, where more highly hydrated nesquehonite was the metastable intermediate.

Critical Water Coverage during Forsterite Carbonation in Thin Water Films: Activating Dissolution and Mass Transport.

In geologic carbon sequestration, CO2 is injected into geologic reservoirs as a supercritical fluid (scCO2). The carbonation of divalent silicates exposed to humidified scCO2 occurs in angstroms to nanometers thick adsorbed H2O films. A threshold H2O film thickness is required for carbonate precipitation, but a mechanistic understanding is lacking. In this study, we investigated carbonation of forsterite (Mg2SiO4) in humidified scCO2 (50 °C and 90 bar), which serves as a model system for understanding subsurface divalent silicate carbonation reactivity. Attenuated total reflection infrared spectroscopy pinpointed that magnesium carbonate precipitation begins at 1.5 monolayers of adsorbed H2O. At about this same H2O coverage, transmission infrared spectroscopy showed that forsterite dissolution begins and electrical impedance spectroscopy demonstrated that diffusive transport accelerates. Molecular dynamics simulations indicated that the onset of diffusion is due to an abrupt decrease in the free-energy barriers for lateral mobility of outer-spherically adsorbed Mg2+. The dissolution and mass transport controls on divalent silicate reactivity in wet scCO2 could be advantageous for maximizing permeability near the wellbore and minimize leakage through the caprock.

Water Structure Controls Carbonic Acid Formation in Adsorbed Water Films.

Reaction pathways and kinetics in highly structured H2O adsorbed as Ångstrom to nanometer thick layers on mineral surfaces are distinct from those facilitated by bulk liquid water. We investigate the role of the interfacial H2O structure in the reaction of H2O and CO2 to form carbonic acid (H2CO3) in thin H2O films condensed onto silica nanoparticles from humidified supercritical CO2. Rates of carbonic acid formation are correlated with spectroscopic signatures of H2O structure using oxygen isotopic tracers and infrared spectroscopy. While carbonic acid virtually does not form in the supercritical phase, the silica surface catalyzes this reaction by concentrating H2O through adsorption at hydrophilic silanol groups. Within measurement uncertainty, we found no evidence that carbonic acid forms when exclusively ice-like structured H2O is detected at the silica surface. Instead, formation of H2C18O16O2 from H218O and C16O2 was found to be linearly correlated with liquid-like structured H2O that formed on the ice-like layer.

Synthesis of nanometer-sized fayalite and magnesium-iron(II) mixture olivines.

Olivines are divalent orthosilicates with important geologic, biological, and industrial significance and are typically comprised of mixtures of Mg2+ and Fe2+ ranging from forsterite (Mg2SiO4) to fayalite (Fe2SiO4). Investigating the role of Fe(II) in olivine reactivity requires the ability to synthesize olivines that are nanometer-sized, have different percentages of Mg2+ and Fe2+, and have good bulk and surface purity. This article demonstrates a new method for synthesizing nanosized fayalite and Mg-Fe mixture olivines.First, carbonaceous precursors are generated from sucrose, PVA, colloidal silica, Mg2+, and Fe3+. Second, these precursors are calcined in air to burn carbon and create mixtures of Fe(III)-oxides, forsterite, and SiO2. Finally, calcination in reducing CO-CO2 gas buffer leads to Fe(II)-rich olivines. XRD, Mössbauer, and IR analyses verify good bulk purity and composition. XPS indicates that surface iron is in its reduced Fe(II) form, and surface Si is consistent with olivine. SEM shows particle sizes predominately between 50 and 450 nm, and BET surface areas are 2.8-4.2 m2/g. STEM HAADF analysis demonstrates even distributions of Mg and Fe among the available M1 and M2 sites of the olivine crystals. These nanosized Fe(II)-rich olivines are suitable for laboratory studies with in situ probes that require mineral samples with high reactivity at short timescales.

Tipping Point for Expansion of Layered Aluminosilicates in Weakly Polar Solvents: Supercritical CO2.

Layered aluminosilicates play a dominant role in the mechanical and gas storage properties of the subsurface, are used in diverse industrial applications, and serve as model materials for understanding solvent-ion-support systems. Although expansion in the presence of H2O is well-known to be systematically correlated with the hydration free energy of the interlayer cation, particularly in environments dominated by nonpolar solvents (i.e., CO2), uptake into the interlayer is not well-understood. Using novel high-pressure capabilities, we investigated the interaction of dry supercritical CO2 with Na-, NH4-, and Cs-saturated montmorillonite, comparing results with predictions from molecular dynamics simulations. Despite the known trend in H2O and that cation solvation energies in CO2 suggest a stronger interaction with Na, both the NH4- and Cs-clays readily absorbed CO2 and expanded, while the Na-clay did not. The apparent inertness of the Na-clay was not due to kinetics, as experiments seeking a stable expanded state showed that none exists. Molecular dynamics simulations revealed a large endothermicity to CO2 intercalation in the Na-clay but little or no energy barrier for the NH4- and Cs-clays. Indeed, the combination of experiment and theory clearly demonstrate that CO2 intercalation of Na-montmorillonite clays is prohibited in the absence of H2O. Consequently, we have shown for the first time that in the presence of a low dielectric constant, gas swelling depends more on the strength of the interaction between the interlayer cation and aluminosilicate sheets and less on that with solvent. The finding suggests a distinct regime in layered aluminosilicate swelling behavior triggered by low solvent polarizability, with important implications in geomechanics, storage, and retention of volatile gases, and across industrial uses in gelling, decoloring, heterogeneous catalysis, and semipermeable reactive barriers.

Coordination Covalent Frameworks: A New Route for Synthesis and Expansion of Functional Porous Materials.

The synthetic approaches for fine-tuning the structural properties of coordination polymers or metal organic frameworks have exponentially grown during the past decade. This is due to the control over the properties of the resulting structures such as stability, pore size, pore chemistry and surface area for myriad possible applications. Herein, we present a new class of porous materials called Coordination Covalent Frameworks (CCFs) that were designed and effectively synthesized using a two-step reticular chemistry approach. During the first step, trigonal prismatic molecular building block was isolated using 4-aminobenazoic acid and Cr (III) salt, subsequently in the second step the polymerization of the isolated molecular building blocks (MBBs) takes place by the formation of strong covalent bonds where small organic molecules can connect the MBBs forming extended porous CCF materials. All the isolated CCFs were found to be permanently porous while the discrete MBB were nonporous. This approach would inevitably open a feasible path for the applications of reticular chemistry and the synthesis of novel porous materials with various topologies under ambient conditions using simple organic molecules and versatile MBBs with different functionalities that would not be possible using the traditional one-step approach.

Evidence for Carbonate Surface Complexation during Forsterite Carbonation in Wet Supercritical Carbon Dioxide.

Continental flood basalts are attractive formations for geologic sequestration of carbon dioxide because of their reactive divalent-cation containing silicates, such as forsterite (Mg2SiO4), suitable for long-term trapping of CO2 mineralized as metal carbonates. The goal of this study was to investigate at a molecular level the carbonation products formed during the reaction of forsterite with supercritical CO2 (scCO2) as a function of the concentration of H2O adsorbed to the forsterite surface. Experiments were performed at 50 °C and 90 bar using an in situ IR titration capability, and postreaction samples were examined by ex situ techniques, including scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), focused ion beam transmission electron microscopy (FIB-TEM), thermal gravimetric analysis mass spectrometry (TGA-MS), and magic angle spinning nuclear magnetic resonance (MAS NMR). Carbonation products and reaction extents varied greatly with adsorbed H2O. We show for the first time evidence of Mg-carbonate surface complexation under wet scCO2 conditions. Carbonate is found to be coordinated to Mg at the forsterite surface in a predominately bidentate fashion at adsorbed H2O concentrations below 27 µmol/m(2). Above this concentration and up to 76 µmol/m(2), monodentate coordinated complexes become dominant. Beyond a threshold adsorbed H2O concentration of 76 µmol/m(2), crystalline carbonates continuously precipitate as magnesite, and the particles that form are hundreds of times larger than the estimated thicknesses of the adsorbed water films of about 7 to 15 Å. At an applied level, these results suggest that mineral carbonation in scCO2 dominated fluids near the wellbore and adjacent to caprocks will be insignificant and limited to surface complexation, unless adsorbed H2O concentrations are high enough to promote crystalline carbonate formation. At a fundamental level, the surface complexes and their dependence on adsorbed H2O concentration give insights regarding forsterite dissolution processes and magnesite nucleation and growth.

In situ study of CO2 and H2O partitioning between Na-montmorillonite and variably wet supercritical carbon dioxide.

Shale formations play fundamental roles in large-scale geologic carbon sequestration (GCS) aimed primarily to mitigate climate change and in smaller-scale GCS targeted mainly for CO2-enhanced gas recovery operations. Reactive components of shales include expandable clays, such as montmorillonites and mixed-layer illite/smectite clays. In this study, in situ X-ray diffraction (XRD) and in situ infrared (IR) spectroscopy were used to investigate the swelling/shrinkage and H2O/CO2 sorption of Na(+)-exchanged montmorillonite, Na-SWy-2, as the clay is exposed to variably hydrated supercritical CO2 (scCO2) at 50 °C and 90 bar. Measured d001 values increased in stepwise fashion and sorbed H2O concentrations increased continuously with increasing percent H2O saturation in scCO2, closely following previously reported values measured in air at ambient pressure over a range of relative humidities. IR spectra show H2O and CO2 intercalation, and variations in peak shapes and positions suggest multiple sorbed types of H2O and CO2 with distinct chemical environments. Based on the absorbance of the asymmetric CO stretching band of the CO2 associated with the Na-SWy-2, the sorbed CO2 concentration increases dramatically at sorbed H2O concentrations from 0 to 4 mmol/g. Sorbed CO2 then sharply decreases as sorbed H2O increases from 4 to 10 mmol/g. With even higher sorbed H2O concentrations as saturation of H2O in scCO2 was approached, the concentration of sorbed CO2 decreased asymptotically. Two models, one involving space filling and the other a heterogeneous distribution of integral hydration states, are discussed as possible mechanisms for H2O and CO2 intercalations in montmorillonite. The swelling/shrinkage of montmorillonite could affect solid volume, porosity, and permeability of shales. Consequently, the results may aid predictions of shale caprock integrity in large-scale GCS as well as methane transmissivity in enhanced gas recovery operations.

Automated high-pressure titration system with in situ infrared spectroscopic detection.

A fully automated titration system with infrared detection was developed for investigating interfacial chemistry at high pressures. The apparatus consists of a high-pressure fluid generation and delivery system coupled to a high-pressure cell with infrared optics. A manifold of electronically actuated valves is used to direct pressurized fluids into the cell. Precise reagent additions to the pressurized cell are made with calibrated tubing loops that are filled with reagent and placed in-line with the cell and a syringe pump. The cell's infrared optics facilitate both transmission and attenuated total reflection (ATR) measurements to monitor bulk-fluid composition and solid-surface phenomena such as adsorption, desorption, complexation, dissolution, and precipitation. Switching between the two measurement modes is accomplished with moveable mirrors that direct the light path of a Fourier transform infrared spectrometer into the cell along transmission or ATR light paths. The versatility of the high-pressure IR titration system was demonstrated with three case studies. First, we titrated water into supercritical CO2 (scCO2) to generate an infrared calibration curve and determine the solubility of water in CO2 at 50 °C and 90 bar. Next, we characterized the partitioning of water between a montmorillonite clay and scCO2 at 50 °C and 90 bar. Transmission-mode spectra were used to quantify changes in the clay's sorbed water concentration as a function of scCO2 hydration, and ATR measurements provided insights into competitive residency of water and CO2 on the clay surface and in the interlayer. Finally, we demonstrated how time-dependent studies can be conducted with the system by monitoring the carbonation reaction of forsterite (Mg2SiO4) in water-bearing scCO2 at 50 °C and 90 bar. Immediately after water dissolved in the scCO2, a thin film of adsorbed water formed on the mineral surface, and the film thickness increased with time as the forsterite began to dissolve. However, after approximately 2.5 h, the trend reversed, and a carbonate precipitate began to form on the forsterite surface, exposing dramatic chemical changes in the thin-water film. Collectively, these applications illustrate how the high-pressure IR titration system can provide molecular-level information about the interactions between variably wet scCO2 and minerals relevant to underground storage of CO2 (geologic carbon sequestration). The apparatus could also be utilized to study high-pressure interfacial chemistry in other areas such as catalysis, polymerization, food processing, and oil and gas recovery.

Mineralization of basalts in the CO2-H2O-SO2-O2 system.

Sequestering carbon dioxide (CO2) containing minor amounts of co-contaminants in geologic formations was investigated in the laboratory through the use of high pressure static experiments. Five different basalt samples were immersed in water equilibrated with supercritical CO2 containing 1 wt % sulfur dioxide (SO2) and 1 wt % oxygen (O2) at reservoir conditions (∼ 100 bar, 90 °C) for 48 and 98 days. Gypsum (CaSO4) was a common precipitate, occurred early as elongated blades with striations, and served as substrates for other mineral products. In addition to gypsum, bimodal pulses of water released during dehydroxylation were key indicators, along with X-ray diffraction, for verifying the presence of jarosite-alunite group minerals. Well-developed pseudocubic jarosite crystals formed surface coatings, and in some instances, mixtures of natrojarosite and natroalunite aggregated into spherically shaped structures measuring 100 µm in diameter. Reaction products were also characterized using infrared spectroscopy, which indicated OH and Fe-O stretching modes. The presences of jarosite-alunite group minerals were found in the lower wavenumber region from 700 to 400 cm(-1). A strong preferential incorporation of Fe(III) into natrojarosite was attributed to the oxidation potential of O2. Evidence of CO2 was detected during thermal decomposition of precipitates, suggesting the onset of mineral carbonation.

Rotor design for high pressure magic angle spinning nuclear magnetic resonance.

High pressure magic angle spinning (MAS) nuclear magnetic resonance (NMR) with a sample spinning rate exceeding 2.1 kHz and pressure greater than 165 bar has never been realized. In this work, a new sample cell design is reported, suitable for constructing cells of different sizes. Using a 7.5 mm high pressure MAS rotor as an example, internal pressure as high as 200 bar at a sample spinning rate of 6 kHz is achieved. The new high pressure MAS rotor is re-usable and compatible with most commercial NMR set-ups, exhibiting low (1)H and (13)C NMR background and offering maximal NMR sensitivity. As an example of its many possible applications, this new capability is applied to determine reaction products associated with the carbonation reaction of a natural mineral, antigorite ((Mg,Fe(2+))(3)Si(2)O(5)(OH)(4)), in contact with liquid water in water-saturated supercritical CO(2) (scCO(2)) at 150 bar and 50°C. This mineral is relevant to the deep geologic disposal of CO(2), but its iron content results in too many sample spinning sidebands at low spinning rate. Hence, this chemical system is a good case study to demonstrate the utility of the higher sample spinning rates that can be achieved by our new rotor design. We expect this new capability will be useful for exploring solid-state, including interfacial, chemistry at new levels of high-pressure in a wide variety of fields.