Clinical effect of a door shaped individualized dental archwire on the treatment of maxillary transposed canines / 口腔疾病防治

Objective @#To discuss the effectiveness and mechanism for movement of maxillary buccally transposed canines by using a door-shaped individualized dental archwire mechanic and to provide a reference for clinicians.@*Methods@#Eight patients with unilateral maxillary transposed canines were enrolled. All patients were treated with door-shaped individualized archwires. Before treatment (T1) and after the crowns of the transposed canines were moved to the right buccal positions in the dental arch during the treatment (T2), orthopantomograms were taken both at T1 and T2 to compare the linear changes (distance changes of the crown and root apex) and angular changes to study the mechanisms of tooth movement. The probing depth and buccal crown height were measured using a periodontal probe to compare periodontal changes before treatment (T1) and after treatment (T3) between the transposed canines and contralateral canines. @*Results@# All eight transposed canines were successfully brought back to their normal dental arch position but were made more buccal by using the door-shaped individualized dental archwire, with a mean of (11.5 ± 2.7) months. The average overall duration was (28.3 ± 4.7) months. The crown distance changes of the canines from T1 to T2 (8.1 mm) were greater than those of the root apexes (1.5 mm) (P<0.05). The mean angulation changes of the long axes of the canines were 17.5°. There was no significant difference in the depth of periodontal measurement and buccal crown height measurement between T1 and T3 (P>0.05). @*Conclusion @# The buccal movement of maxillary transposed canines under a door-shaped individualized dental archwire was effective and feasible. The movement pattern under this mechanism was controlled tipping.

Preparation and Laser Marking Properties of Poly(propylene)/Molybdenum Sulfide Composite Materials.

In this study, using molybdenum sulfide (MoS2) as laser-sensitive particles and poly(propylene) (PP) as the matrix resin, laser-markable PP/MoS2 composite materials with different MoS2 contents ranging from 0.005 to 0.2% were prepared by melt-blending. A comprehensive analysis of the laser marking performance of PP/MoS2 composites was carried out by controlling the content of laser additives, laser current intensity, and the scanning speed of laser marking. The color difference test shows that the best laser marking performance of the composite can be obtained at the MoS2 content of 0.02 wt %. The surface morphology of the PP/MoS2 composite material was observed after laser marking using a metallographic microscope, an optical microscope, and a scanning electron microscope (SEM). During the laser marking process, the laser energy was absorbed and converted into heat energy to cause high-temperature melting, pyrolysis, and carbonization of PP on the surface of the PP/MoS2 composite material. The black marking from carbonized materials was formed in contrast to the white matrix. Using X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and Raman spectroscopy, the composite materials before and after laser marking were tested and characterized. The PP/MoS2 composite material was pyrolyzed to form amorphous carbonized materials. The effect of the laser-sensitive MoS2 additive on the mechanical properties of composite materials was investigated. The results show that the PP/MoS2 composite has the best laser marking property when the MoS2 loading content is 0.02 wt %, the laser marking current intensity is 11 A, and the laser marking speed is 800 mm/s, leading to a clear and high-contrast marking pattern.

Surface Laser-Marking and Mechanical Properties of Acrylonitrile-Butadiene-Styrene Copolymer Composites with Organically Modified Montmorillonite.

In this study, organically modified montmorillonite (OMMT) was prepared by modifying MMT with a cationic surfactant cetyltrimethylammonium bromide (CTAB). The obtained OMMT of different loading contents (1, 2, 4, 6, and 8 wt %) was melt-blended with poly(acrylonitrile-co-butadiene-co-styrene) (ABS) to prepare a series of ABS/OMMT composites, which were laser marked using a neodymium-doped yttrium aluminum garnet (Nd:YAG) laser beam of 1064 nm under different laser current processes. X-ray diffraction (XRD), color difference spectrometer, optical microscope, water contact angle tests, scanning electron microscope (SEM), and Raman spectroscopy were carried out to characterize the morphology, structure, and properties of the laser-patterned ABS composites. The effects of the addition of OMMT and the laser marking process on the mechanical properties of ABS/OMMT composites were investigated through mechanical property tests. The results show that the obtained ABS/OMMT composites have enhanced laser marking performance, compared to the ABS. When the OMMT content is 2 wt % and the laser current intensity is 9 A, the marking on ABS composites has the highest contrast (ΔE = 36.38) and sharpness, and the quick response (QR) code fabricated can be scanned and identified with a mobile app. SEM and water contact angle tests showed that the holes, narrow cracks, and irregular protrusion are formed on the composite surface after laser marking, resulting in a more hydrophobic surface and an increased water contact angle. Raman spectroscopy and XRD indicate that OMMT can absorb the near-infrared laser energy, undergo photo thermal conversion, and cause the pyrolysis and carbonization of ABS to form black marking, and the crystal structure itself does not change significantly. When the 2 wt % of OMMT is loaded, the tensile strength, elongation at break, and impact strength of ABS/OMMT are increased by 15, 20, and 14%, respectively, compared to ABS. Compared with the unmarked ABS/OMMT, the defects including holes and cracks generated on the surface of the marked one lead to the decreased mechanical property. The desirable combination of high contrast laser marking performance and mechanical properties can be achieved at an OMMT loading content of 2 wt % and a laser current intensity of 9 A. This research work provides a simple, economical, and environmentally friendly method for laser marking of engineering materials such as ABS.

Facile preparation of polyacrylamide/chitosan/Fe3O4 composite hydrogels for effective removal of methylene blue from aqueous solution.

In this study, Fe3O4 magnetic nanoparticles were synthesized in situ in the polyacrylamide/chitosan (PAAm/CS) hydrogel networks. The obtained hydrogels are characterized by Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), X-ray diffraction (XRD), and Raman spectroscopy. The results confirm that the three-dimensional network structure of the hydrogels is incorporated with Fe3O4 nanoparticles. The adsorption properties of PAAm/CS/Fe3O4 hydrogels for methylene blue (MB) in aqueous solution were studied using Ultraviolet and visible spectrophotometry (UV-vis). The results show that when compared to PAAm/CS hydrogels, PAAm/CS/Fe3O4 hydrogels can adsorb MB with higher adsorption capacities of approximately 1603 mg/g, and the kinetics and isotherm models of the adsorption process could be better described by the pseudo-first order model and Langmuir isotherm model, respectively. Due to the facile preparation, high adsorption capacity, and low cost, the PAAm/CS/Fe3O4 hydrogels are good adsorbents for MB and exhibit significant potential in the treatment of sewage.

Activating transcription factor 6 (ATF6) negatively regulates Polo-like kinase 4 expression via recruiting C/EBPß to the upstream-promoter during ER stress.

Polo-like kinase 4 (PLK4) is a member of the serine/threonine protein kinase family involved in cell-cycle regulation and cellular response to stresses. However, the alteration of PLK4 in response to endoplasmic reticulum (ER) stress has not been well described. In the present study, we focused on the regulation of PLK4 regulation in response to ER stress. PLK4 expression was dramatically reduced under ER stress induced by brefeldin A (BFA), tunicamycin (TM), or thapsigargin (TG) and down regulation of PLK4 expression was dependent on activating transcription factor 6 (ATF6) and CCAAT/enhancer-binding protein ß (C/EBPß). Luciferase activity analysis of the truncated PLK4 promoter indicated that region from -1343 to -1250 of the PLK4 promoter was sensitive to BFA or TG. Additionally, ChIP and ChIP Re-IP assays showed that ATF6 and C/EBPß were assembled on the same region of Plk4 promoter. Notably, we identified one C/EBPß responsive element at position -1284, to which ATF6 or C/EBPß binding was enhanced by BFA or TG under in vitro and in vivo conditions. Finally, overexpression of PLK4 inhibits apoptosis and promotes cell proliferation in response to ER stress. In summary, these results demonstrated that ER stress plays a crucial role in PLK4 expression. ATF6 may upregulate DNA-binding affinities after BFA treatment, via recruiting C/EBPß to the upstream promoter of PLK4. These findings may contribute to the understanding of the molecular mechanism of PLK4 regulation.

Facile Fabrication of High-Contrast and Light-Colored Marking on Dark Thermoplastic Polyurethane Materials.

In this work, using ferroferric oxide (Fe3O4) and zirconium oxide (ZrO2) as laser-sensitive particles and thermoplastic polyurethane (TPU) as the matrix resin, a series of TPU/Fe3O4/ZrO2 composites were prepared by melt blending, and the effect of the laser marking additive content, composition, and laser marking parameters on the laser marking properties of composites was investigated. The laser marking mechanism of Fe3O4/ZrO2 additives and the role of each component in TPU laser marking were studied by metallographic microscopy, color difference test, scanning electron microscopy, and Raman spectroscopy. Fe3O4 nanoparticles as a laser sensitizer component, on the one hand, can act as a pigment to make the TPU substrate black and, on the other hand, can absorb laser energy to contribute to the formation of laser markings on TPU composite surfaces. In addition, the introduction of ZrO2 nanoparticles can help absorb the laser energy, while the contrast can be improved to enhance the laser marking performance of the TPU composite. Through thermogravimetric analysis, the changes in the thermally stable properties of TPU composites before and after laser marking were investigated, and the results indicated that Fe3O4/ZrO2 nanoparticles can absorb the laser energy, causing melting and pyrolysis of the TPU backbone at a high temperature, to produce a gaseous product resulting in foaming. Finally, the high-contrast and light-colored markings were formed on the black TPU composite surface. This work provides a facile method for producing high-contrast and light-colored markings on the dark TPU composite surface.

Percutaneous delivery of thalidomide and its N-alkyl analogs.

PURPOSE: The purpose of this study was to determine the permeation parameters of thalidomide and three of its N-alkyl analogs and to establish a correlation between the physicochemical properties of these compounds and their percutaneous rates of absorption. METHODS: In vitro permeation studies were performed from buffer, n-alkanols and various mixed components using vertical Franz diffusion cells fitted with human epidermal membranes. RESULTS: Measured steady-state fluxes indicate that N-methyl thalidomide is a far better penetrant of human skin than the "parent molecule". However, fluxes through skin drop off markedly from that of the methylated compound when the chain length is extended to propyl and pentyl. However, they remain well above the flux of thalidomide, which is less than 0.025 microg/cm2/h. CONCLUSIONS: The best skin permeant of this series was the N-methyl analog, which also exhibited the highest water (buffer) solubility compared to thalidomide, and the N-propyl and N-pentyl analogs. The N-propyl and N-pentyl analogs were more lipid soluble and exhibited higher partition coefficient values than the N-methyl analog. From all the permeability data using buffer, a series of n-alkanols and various combinations of solvents and enhancers as vehicles, the more water-soluble compound and not the more lipid soluble one was the best skin permeant.