Enantioselective α-Boryl Carbene Transformations.

Carbenes, recognized as potent intermediates, enable unique chemical transformations, and organoborons are pivotal in diverse chemical applications. As a hybrid of carbene and the boryl group, α-boryl carbenes are promising intermediates for the construction of organoborons; unfortunately, such carbenes are hard to access and have low structural diversity with their asymmetric transformations largely uncharted. In this research, we utilized boryl cyclopropenes as precursors for the swift synthesis of α-boryl metal carbenes, a powerful category of intermediates for chiral organoboron synthesis. These α-boryl carbenes undergo a series of highly enantioselective transfer reactions, including B-H and Si-H insertion, cyclopropanation, and cyclopropanation/Cope rearrangement, catalyzed by a singular chiral copper complex. This approach opens paths to previously unattainable but easily transformable chiral organoborons, expanding both carbene and organoboron chemistry.

NSUN6 Regulates NM23-H1 Expression in an m5C Manner to Affect Epithelial-Mesenchymal Transition in Lung Cancer.

PURPOSE: The expression and regulatory mechanism of NSUN6 in lung cancer are still unclear. Our study explored whether NSUN6 mediates progression of lung cancer by affecting NM23-H1 expression in an m5C-dependent manner. METHODS: qRT-PCR, CCK-8, colony formation, transwell, and Western blot analysis were employed to probe the impact of NSUN6 on lung cancer cell proliferation, migration, and epithelial-mesenchymal transition (EMT). RMVar database was utilized to forecast the downstream genes of NSUN6. The mode of interaction between NSUN6 and NM23-H1 was determined by dot blot, luciferase assay, m5C RIP, and cell function assays. The effect of NSUN6 expression on tumor growth was verified in vivo. RESULTS: Expression of NSUN6 was reduced in lung cancer cells, and over-expression of NSUN6 restricted the proliferation of lung cancer cells, migration, and EMT. NSUN6 regulated NM23-H1 expression by modifying the 3'-UTR of NM23-H1 mRNA through m5C and inhibited lung cancer cell proliferation, migration, and EMT. In vivo experiments also showed that over-expression of NSUN6 inhibited the occurrence of lung cancer. CONCLUSION: NSUN6 regulates NM23-H1 expression in an m5C-dependent manner to affect EMT in lung cancer. Thus, NSUN6 may be considered as a potential therapeutic target for lung cancer.

Theoretical investigation of synergistically boosting the anchoring and electrochemical performance of lithiophilic/sulfiphilic transition metal carbides for lithium-sulfur batteries.

Lithium-sulfur (Li-S) battery is one of the most promising next-generation energy-storage systems with a high energy density and low cost. However, their commercial applications face several challenges, such as the shuttle effect caused by the soluble lithium polysulfide (LiPSs) intermediates and the sluggish sulfur redox reaction. In this article, we systematically investigated the anchoring and electrochemical performance of a series of transition metal carbides (TMCs: TiC, VC, ZrC, NbC, HfC, TaC) as cathode materials for Li-S batteries by theoretical calculations. The lithiophilic/sulfiphilic non-polar (001) surfaces of TMCs can offer moderate binding strength with LiPS intermediates, ensuring good performance of sulfur immobilization. These TMCs can also facilitate lithium diffusion, indicating the good rate performance of Li-S batteries. We also demonstrated that the studied TMCs can be classified into two classes according to their catalytic activity for Li2S decomposition which originated from their different electronic structural features. Furthermore, TiC, ZrC, and HfC exhibited excellent bifunctional electrochemical activity through reducing the Gibbs free energy for sulfur reduction reactions (SRRs) and lowering the barrier for Li2S decomposition which facilitates accelerating electrode kinetics and elevating utilization of sulfur. Our results offer a systematic approach to designing and screening non-polar materials for high-performance Li-S batteries, based on the rational electronic structure and lattice match strategy.

Iron-Catalyzed Stereoconvergent 1,4-Hydrosilylation of Conjugated Dienes.

Stereoconvergent transformation of E/Z mixtures of olefins to products with a single steric configuration is of great practical importance but hard to achieve. Herein, we report an iron-catalyzed stereoconvergent 1,4-hydrosilylation reactions of E/Z mixtures of readily available conjugated dienes for the synthesis of Z-allylsilanes with high regioselectivity and exclusive stereoselectivity. Mechanistic studies suggest that the reactions most likely proceed through a two-electron redox mechanism. The stereoselectivity of the reactions is ultimately determined by the crowded reaction cavity of the α-diimine ligand-modified iron catalyst, which forces the conjugated diene to coordinate with the iron center in a cis conformation, which in turn results in generation of an anti-π-allyl iron intermediate. The mechanism of this stereoconvergent transformation differs from previously reported mechanisms of other related reactions involving radicals or metal-hydride species.

Co-Fe3C pair sites catalyst with heterometallic dual active sites for efficient oxygen reduction reaction.

Newly emerging metal-based pair sites catalysts show great potential because they can provide more metal active centers with synergistic effect for green catalysis, compared with single site catalysts. However, both the synthesis and catalytic mechanisms of the pair sites catalyst with new structural features need to be developed vigorously to promote the desired chemical reactions, especially carbon-based metal catalysts for green energy storage and conversion devices. Herein, we constructed highly active Co-Fe3C pair sites on N-doped graphite catalyst (CNCo-Fe3C) by a two-step strategy, which have electron interactions of heterometallic atoms and can play better synergistic effect. X-ray absorption spectra and density functional theory (DFT) calculation further identify the presence of heterometallic active sites in the pair sites catalyst, resulting in electron redistribution and positive d-band center due to the electron interactions. The more positive d-band center model predicts the optimization of the adsorption energy of oxygen-containing intermediates, and reduces the energy barrier of the determining step. This further results in superior oxygen reduction reaction (ORR) performance with a half-wave potential of 0.90 V versus reversible hydrogen electrode (vs.RHE) and superior long-term stability for about 20 h with only 2.3 % decrease at 0.75 V vs.RHE in 0.1 M KOH solution. Additionally, it also shows significant peak power density of 124 mW cm-2 and prominent cycling stability performance exceeding 400 h at 5 mA cm-2 in the Zn-air battery (ZAB) test, which is higher than that of Pt/C catalyst. This work provides a new idea for the regulation of intrinsic activity of non-noble metal ORR catalysts through the synergistic effect of the pair sites.

Theoretical identification of the superior anchoring effect and electrochemical performance of Ti2CS2 by single atom Zn doping for lithium-sulfur batteries.

As one of the promising next-generation energy storage systems, lithium-sulfur (Li-S) batteries have been the subject of much recent attention. However, the polysulfide shuttle effect remains problematic owing to the dissolution of intermediate polysulfide species in the electrolyte and the sluggish reaction dynamics in Li-S batteries. To overcome these issues, this work reports an effective strategy for enhancing the electrochemical performance of Li-S batteries using single atom Zn doping on the S-terminated Ti2C MXenes (Ti2-xZnxCS2). Spin-polarized density functional theory (DFT) calculations were performed to elucidate the interactions of lithium polysulfides (LiPSs) and the Ti2-xZnxCS2 surface in terms of geometric and electronic properties, as well as the delithiation process of Li2S on the Ti2-xZnxCS2 surface. It is found that doping single atom Zn could induce a new Lewis acid-based sites, which could provide proper affinity toward LiPSs. Combined with the metallic character, a low Li diffusion barrier and high catalytic activity for the delithiation process of Li2S, makes Ti2-xZnxCS2 a promising cathode material for Li-S batteries. The results demonstrate the importance of surface chemistry and the electronic structure of MXenes in LiPSs' adsorption and catalysis capability. We believe that our findings provide insights into the recent experimental results and guidance for the preparation and practical application of MXenes in Li-S batteries.

Computational design of a reliable intermediate-band photovoltaic absorber based on diamond.

To reduce the wide bandgap of diamond and expand its applications in the photovoltaic fields, a diamond-based intermediate-band (IB) material C-Ge-V alloy was designed by first-principles calculations. By replacing some C with Ge and V in the diamond, the wide bandgap of the diamond can be reduced sharply and a reliable IB, which is mainly formed by the d states of V, can be formed in the bandgap. With the increase of Ge content, the total bandgap of the C-Ge-V alloy will be reduced and close to the optimal value of an IB material. At a relatively low atomic concentration of Ge (below 6.25%), the IB formed in the bandgap is partially filled and varies little with the concentration of Ge. When further increasing the content of Ge, the IB moves close to the conduction band and the electron filling in the IB increases. The 18.75% content of Ge might be the limitation to form an IB material, and the optimal content of Ge should be between 12.5% and 18.75%. Compared with the content of Ge, the distribution of Ge has a minor effect on the band structure of the material. The C-Ge-V alloy shows strong absorption for the sub-bandgap energy photons, and the absorption band generates a red-shift with the increase of Ge. This work will further expand the applications of diamond and be helpful to develop an appropriate IB material.

Ag Single Atoms Anchored on CeO2 with Interfacial Oxygen Vacancies for Efficient CO2 Electroreduction.

Ag single-atom catalysts (SACs) have great potential in selective electrocatalysis of the CO2 reduction reaction (CO2RR) to CO, while it is still a challenge to achieve high current density and high atom efficiency simultaneously. Here, we present a new and simple in situ adsorption-reduction method to prepare Ag SACs supported on CeO2 (Ag1/CeO2). It is found that Ag single atoms are anchored on CeO2 through strong metal-support interaction (SMSI), and each Ag atom is accompanied with three interfacial oxygen vacancies. This Ag1/CeO2 exhibits high performance in the electrocatalytic CO2RR with a high CO faradaic efficiency (FE) of >95% under a wide potential range. The turnover frequency (TOF) value can reach 50,310 h-1 at FECO = 99.5% in H-cells. Notably, Ag1/CeO2 achieves an industrial-grade current density of 403 mA cm-2 with a high FECO of 97.2% in flow cells. Experimental results combined with density functional theory calculation revealed that this superior performance was mainly ascribed to the existence of interfacial oxygen vacancies, which lead to the formation of Ag-O-Ce3+ atomic interfaces, and activates the Ce3+-O structures as the synergistic active center of Ag, thus promoting CO2 adsorption and activation and reducing the reaction potential barrier of *COOH-to-*CO.

Dual-functional Z-scheme CdSe/Se/BiOBr photocatalyst: Generation of hydrogen peroxide and efficient degradation of ciprofloxacin.

The major challenges of clean energy and environmental pollution have resulted in the development of photocatalysis technologies for energy conversion and the degradation of refractory pollutants. Herein, a novel CdSe/Se/BiOBr hydrangea-like photocatalyst was used to produce hydrogen peroxide (H2O2) and degrade ciprofloxacin (CIP). The Z-scheme heterojunction structure of the photocatalyst and the doping of selenium (Se) led to the efficient separation of electron-hole pairs and charge transfer. The optimized sample of 2 wt% CdSe/Se/BiOBr produced 142.15 mg·L-1 rate of H2O2, which was much higher than that produced by pure BiOBr (89.4 mg·L-1) or CdSe/Se (10.9 mg·L-1). Additionally, almost 100 % of CIP was degraded within 30 min, with a first order rate constant of nearly 5.35 times that of pure BiOBr and 81.44 times that of pure CdSe/Se. The excellent removal efficiency of CIP from natural water matrices confirmed that the composites are promising for the removal of contaminants from natural waterways. Based on trapping experiments, electron spin resonance spectra (ESR) spectroscopy, and density functional theory (DFT) calculations, the photocatalytic mechanisms of H2O2 and CIP degradation by the Z-scheme CdSe/Se/BiOBr composites were proposed. Overall, the dual-functional CdSe/Se/BiOBr composite could potentially be applied for photocatalytic production of H2O2 and treatment of organic pollutants in water.

Enabling multifunctional electrocatalysts by modifying the basal plane of unifunctional 1T'-MoS2 with anchored transition metal single atoms.

Multifunctional electrocatalysts for hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR) are attractive for overall water-splitting, rechargeable metal-air batteries, and unitized regenerative fuel cells. A single-atom catalyst (SAC) may exhibit additional advantages over its nanoparticle counterpart, and already there have been significant advances in the development of bifunctional and trifunctional SACs for HER, ORR, and OER, but great challenges remain for their rational design. Herein, we propose a strategy to realize multifunctional SACs, i.e., modifying unifunctional materials to introduce new active sites on the surface. Specifically, by virtue of the intrinsic excellent HER performance of 1T'-MoS2, we theoretically design multifunctional SACs by anchoring appropriate transition-metal single atoms. Intriguingly, 1T'-MoS2 with supported Co single atoms (Co@MoS2) are demonstrated to be highly active for both OER and ORR with ultralow overpotentials of less than 0.3 V, ascribed to the moderate chemical activity and unique electronic structure of the Co atomic center. Consequently, combining the intrinsic HER activity of 1T'-MoS2, Co@MoS2 is proposed to be promising efficient trifunctional SACs. Further, the phase engineering on SACs is unrevealed and elucidated by comparing the properties of the Co atomic center-supported on 1T'-MoS2 and 1H-MoS2. This work provides a feasible strategy for the design of multifunctional SACs for the renewable and sustainable energy technology and provides an insight into the phase engineering on SACs.

Single-atom catalysts based on TiN for the electrocatalytic hydrogen evolution reaction: a theoretical study.

The electrocatalytic hydrogen evolution reaction (HER) for water splitting is crucial for the sustainable production of clean hydrogen fuel, while the high cost of Pt catalysts impedes its commercialization. Herein, we have performed a systematic theoretical study on the electrocatalytic HER over single-atom catalysts (SACs) based on low-cost TiN. Specifically, the TiN(100) surface with a Ti or N vacancy has been considered as the support. 20 transition-metal (TM) atoms and 3 nonmetallic atoms are embedded into the Ti or N vacancy, accordingly denoted as M@Tiv or M@Nv. All the single atoms can be stabilized by the surface vacancies, controlled by the adjustable chemical potential. Interestingly, for TM-embedded TiN(100), the hydrogen binding is much stronger over M@Nv than M@Tiv, which can be attributed to the more localized d states of the TM atoms anchored by the N vacancies, indicating a strong coordination effect. Among 43 catalysts, 10 (Ni, Zn, Nb, Mo, Rh@Tiv, and Au, Pd, W, Mo, B@Nv) were predicted to have high HER catalytic activity with near-zero hydrogen adsorption free energy. For the further gaseous hydrogen evolution, Zn@Tiv can adopt both Tafel (with an energy barrier of 0.68 eV) and Heyrovsky mechanisms, while the others may prefer the Heyrovsky mechanism. This work provides a promising strategy to realize cost-efficient electrocatalysts for the HER, and highlights the important role of the local coordination environment for SACs.

Tailoring the Electronic Structure of Transition Metals by the V2C MXene Support: Excellent Oxygen Reduction Performance Triggered by Metal-Support Interactions.

The enhancement of oxygen reduction reaction (ORR) activity can significantly boost the performance of fuel cells. MXene-supported transition metals with strong metal-support interactions (SMSI) are an effective strategy to increase the catalytic activity and durability while decreasing the usage of noble metals. Herein, a series of composites of transition-metal atoms (Ni, Pd, Pt, Cu, Ag, and Au) deposited on V2C MXene are designed as potential catalysts for ORR using density functional theory. The calculation results demonstrate that all the transition metals prefer to form a monolayer on V2C (TMML/V2C) with high thermodynamic stability because of SMSI, in which the Pd, Pt, Ag, and Au monolayers exhibit high chemical stability during the ORR process. PtML/V2C exhibits the highest activity toward ORR with the overpotential down to 0.38 V and the largest energy barrier of 0.48 eV. The excellent catalytic performance originates from the modification of the electronic structure by the V2C support because of SMSI. Our studies elucidate the SMSI between transition-metal atoms and V2C MXene from the atomic level and thus rationally design the ORR catalyst at the cathode of fuel cells to enhance the activity while possessing high stability and less Pt usage.

A Heterostructure Coupling of Bioinspired, Adhesive Polydopamine, and Porous Prussian Blue Nanocubics as Cathode for High-Performance Sodium-Ion Battery.

Prussian blue (PB) and its analogues are recognized as promising cathodes for rechargeable batteries intended for application in low-cost and large-scale electric energy storage. With respect to PB cathodes, however, their intrinsic crystal regularity, vacancies, and coordinated water will lead to low specific capacity and poor rate performance, impeding their application. Herein, nanocubic porous Nax FeFe(CN)6 coated with polydopamine (PDA) as a coupling layer to improve its electrochemical performance is reported, inspired by the excellent adhesive property of PDA. As a cathode for sodium-ion batteries, the Nax FeFe(CN)6 electrode coupled with PDA delivers a reversible capacity of 93.8 mA h g-1 after 500 cycles at 0.2 A g-1 , and a discharge capacity of 72.6 mA h g-1 at 5.0 A g-1 . The sodium storage mechanism of this Nax FeFe(CN)6 coupled with PDA is revealed via in situ Raman spectroscopy. The first-principles computational results indicate that FeII sites in PB prefer to couple with the robust PDA layer to stabilize the PB structure. Moreover, the sodium-ion migration in the PB structure is enhanced after coating with PDA, thus improving the sodium storage properties. Both experiments and computational simulations present guidelines for the rational design of nanomaterials as electrodes for energy storage devices.

Three-Dimensional Superlithiophilic Interphase for Dendrite-Free Lithium Metal Anodes.

Lithium metal is among the most promising anode candidates of high-energy-density batteries. However, the formed dendrites result in low Coulombic efficiency and serious security issues. Designing lithiophilic sites is one of the effective strategies to control Li deposition. Herein, we propose a three-dimensional lithiophilic N-rich carbon nanofiber with the decoration of ZnO granules as a protective layer for a dendrite-free lithium metal anode. Theoretical evaluation indicates the synergistic effects of lithiophilic ZnO and N-containing functional groups enhance lithium adsorption and trigger uniform deposition. With the lithiophilic interlayer, the lithium deposition overpotential is only ∼20, 50, and 74 mV at 1, 3, and 6 mA cm-2, respectively, which are much lower than those without the functional interlayer (∼55, 130, and 238 mV). The average Coulombic efficiency of lithium stripping and plating is up to ∼97.4% (94.0% for that without the interlayer) at 0.5 mA cm-2. Meanwhile, the Li|LiFePO4 full cell with the superlithiophilic interlayer demonstrates a high capacity retention rate of 99.6% (91.0% for that without the interlayer) over 200 cycles at 1 C. The introduction of the lithiophilic interphase could provide a convenient strategy and guidance to design the configuration for the practical application of Li metal batteries.

Structural Evolution of AlN Nanoclusters and the Elemental Chemisorption Characteristics: Atomistic Insight.

A theoretical insight into the structural evolution of AlN atomic clusters and the chemisorption of several common alloying elements on alarge cluster has been performed in the framework of state-of-the-art density functional theory calculations. We report the findings that the longitudinal growth takes precedence during the early stage of structural evolution of small AlN clusters, when the longitudinal dimension becomes stable, the AlN cluster proceeds with cross-growth and blossoms into the large-size Al60N60. Upon the growth of clusters, the structures tend to become well-knit gradually. As for the evolution of electronic structures of AlN clusters through the HSE06 calculations, the density of states curves become more and more nondiscrete with the atomic structures evolving from small to large size and tend to resemble that of the Wurtzite AlN. The chemisorption characteristics of the large Al60N60 cluster towards different elements such as Al, N, Fe and Cu are also theoretically unveiled, in which it is interestingly found that the N and Cu atoms are likely to be adsorbed similarly at the growth edge position of the Al60N60 cluster and the density of states curves of these two chemisorption systems near the Fermi level also show some interesting similarities.

A sulfur coordination polymer with wide bandgap semiconductivity formed from zinc(II) and 5-methylsulfanyl-1,3,4-thiadiazole-2-thione.

The sulfur coordination polymer catena-poly[zinc(II)-µ2-bis[5-(methylsulfanyl)-2-sulfanylidene-2,3-dihydro-1,3,4-thiadiazol-3-ido-κ2N3:S]], [Zn(C3H3N2S3)2]n or [Zn2MTT4]n, constructed from Zn2+ ions and 5-methylsulfanyl-1,3,4-thiadiazole-2-thione (HMTT), was synthesized successfully and structurally characterized. [Zn2MTT4]n crystallizes in the tetragonal space group I-4 (No. 82). Each MTT- ligand (systematic name: 5-methylsulfanyl-2-sulfanylidene-2,3-dihydro-1,3,4-thiadiazol-3-ide) coordinates to two different ZnII ions, one via the thione group and the other via a ring N atom, with one ZnII atom being in a tetrahedral ZnS4 and the other in a tetrahedral ZnN4 coordination environment. These tetrahedral ZnS4 and ZnN4 units are alternately linked by the organic ligands, forming a one-dimensional chain structure along the c axis. The one-dimensional chains are further linked via C-H...N and C-H...S hydrogen bonds to form a three-dimensional network adopting an ABAB-style arrangement that lies along both the a and b axes. The three-dimensional Hirshfeld surface analysis and two-dimensional (2D) fingerprint plots confirm the major interactions as C-H...S hydrogen bonds with a total of 35.1%, while 7.4% are C-H...N hydrogen-bond interactions. [Zn2MTT4]n possesses high thermal and chemical stability and a linear temperature dependence of the bandgap from room temperature to 270 °C. Further investigation revealed that the bandgap changes sharply in ammonia, but only fluctuates slightly in other solvents, indicating its promising application as a selective sensor.

Transition metal embedded C3N monolayers as promising catalysts for the hydrogen evolution reaction.

Transition metal (TM) doped or TM, N co-doped carbon materials have attracted increasing attention as efficient catalysts for the hydrogen evolution reaction (HER), to replace Pt or reduce the usage of Pt. By using first-principles calculations, the TM-embedded C3N monolayer (TM@C3N) has been theoretically investigated for HER, for which eighteen TMs are selected from the 3d, 4d, and 5d rows. The M-CC catalysts, with the TM atom embedded into the C-C double atomic vacancy, are the most stable among the various TM@C3N materials. All the M-CC catalysts show metallic conductivity and high thermal stability. The hydrogen binding free energy for the M-CC catalysts can be optimized to be close to 0 eV by choosing a suitable TM, and the kinetic barrier under the Tafel mechanism for further gaseous hydrogen evolution can be reduced to as low as 0.58 eV. These results suggest that the HER catalytic activities of the M-CC catalysts are likely comparable or even higher than those of the well-explored MoS2 nanostructures or Pt catalysts. Moreover, the HER activities of the M-CC catalysts can be illustrated by the electronic state distribution near the Fermi level of the catalytically active sites. This study provides a new possibility for cost-efficient HER catalysts of high activity and for the application of C3N nanostructures.

Novel two-dimensional tetragonal vanadium carbides and nitrides as promising materials for Li-ion batteries.

Two-dimensional (2D) materials, owing to their unique properties, have shown great potential for energy storage. In this work, we predict two types of new 2D transition metal carbides and nitrides, namely, tetragonal V2C2 and V2N2 (tetr-V2C2 and tetr-V2N2) monolayer sheets. Comprehensive first-principle calculations show that these two 2D systems exhibit dynamic (thermal) stabilities and intrinsic metallic nature. Compared with the commercialized graphite anode material, tetr-V2C2 and tetr-V2N2 monolayer sheets exhibit lower Li diffusion barrier of 89 and 94 meV, higher theoretical capacity of 412 and 425 mA h g-1 and lower average open circuit of 0.468 and 0.583 V, respectively. Combining those advanced features, our proposed tetr-V2C2 and tetr-V2N2 monolayer sheets are both promising candidates as anode materials for lithium-ion batteries (LIBs) in the future.

Novel structures of two-dimensional tungsten boride and their superconductivity.

Two-dimensional (2D) superconductors, which can be widely applied in optoelectronic and microelectronic devices, have gained renewed attention in recent years. Based on the crystal structure prediction method and first-principles calculations, we obtain four novel 2D tungsten boride structures of tetr-, hex-, and tri-W2B2 and hex-WB4 and investigate their bonding types, electronic properties, phonon dispersions and electron-phonon coupling (EPC). The results show that both tetr- and hex-W2B2 are intrinsic phonon-mediated superconductors with a superconducting transition temperature (Tc) of 7.8 and 1.5 K, respectively, while tri-W2B2 and hex-WB4 are normal metals. We demonstrate that carrier doping as well as biaxial strain can soften the low-frequency phonon modes and enhance the strength of the EPC. While the Tc of tetr-W2B2 can be increased to 15.4 K under a compressive strain of -2%, the Tc of hex-W2B2 can be enhanced to 5.9 K by a tensile strain of +4%. With the inclusion of spin-orbit couping (SOC), the value of Tc decreases by 38.5% in our systems. Furthermore, we explore the stabilities and mechanical properties of tetr- and hex-W2B2 and indicate that they may be prepared by growing on ZnS(100) and ZnS(111), respectively. Our findings provide novel 2D superconducting materials and will stimulate more efforts in this filed.

An electronic perturbation in TiC supported platinum monolayer catalyst for enhancing water-gas shift performance: DFT study.

The water-gas shift (WGS) reaction behaviors over the TiC(0 0 1) supported Pt monolayer catalyst (PtML/TiC(0 0 1)) are investigated by using the spin-unrestricted density functional theory calculations. Importantly, we find that the PtML/TiC(0 0 1) system exhibits a much lower density of Pt-5d states nearby the Fermi level compared with that for Pt(1 1 1), and the monolayer Pt atoms undergo an electronic perturbation when in contact with TiC(0 0 1) support that would strongly improve the WGS activity of supported Pt atoms. Our calculations clearly indicate that the dominant reaction path follows a carboxyl mechanism involving a key COOH intermediate, rather than the common redox mechanism. Furthermore, through the detailed comparisons, the results demonstrate that the strong interactions between the monolayer Pt atoms and TiC(0 0 1) support make PtML/TiC(0 0 1) a highly active catalyst for the low-temperature WGS reaction. Following the route presented by Bruix et al (2012 J. Am. Chem. Soc. 134 8968-74), the positive effect derived from strong metal-support interaction in the metal/carbide system is revealed.