Cyclic Mechanism Affects Lumbar Spine Creep Response.

PURPOSE: This study aims to explore how cyclic loading influences creep response in the lumbar spine under combined flexion-compression loading. METHODS: Ten porcine functional spinal units (FSUs) were mechanically tested in cyclic or static combined flexion-compression loading. Creep response between loading regimes was compared using strain-time histories and linear regression. High-resolution computed tomography (µCT) visualized damage to FSUs. Statistical methods, ANCOVA and ANOVA, assessed differences in behavior between loading regimes. RESULTS: Cyclic and static loading regimes exhibited distinct creep response patterns and biphasic response. ANCOVA and ANOVA analyses revealed significant differences in slopes of creep behavior in both linear phases. Cyclic tests consistently showed endplate fractures in µCT imaging. CONCLUSION: The study reveals statistically significant differences in creep response between cyclic and static loading regimes in porcine lumbar spinal units under combined flexion-compression loading. The observed biphasic behavior suggests distinct phases of tissue response, indicating potential shifts in load transfer mechanisms. Endplate fractures in cyclic tests suggest increased injury risk compared to static loading. These findings underscore the importance of considering loading conditions in computational models and designing preventive measures for occupations involving repetitive spinal loading.

Accuracy of Instrumented Mouthguards During Direct Jaw Impacts Seen in Boxing.

PURPOSE: Measuring head kinematics data is important to understand and develop methods and standards to mitigate head injuries in contact sports. Instrumented mouthguards (iMGs) have been developed to address coupling issues with previous sensors. Although validated with anthropomorphic test devices (ATDs), there is limited post-mortem human subjects (PMHS) data which provides more accurate soft tissue responses. This study evaluated two iMGs (Prevent Biometrics (PRE) and Diversified Technical Systems (DTS) in response to direct jaw impacts. METHODS: Three unembalmed male cadaver heads were properly fitted with two different boil-and-bite iMGs and impacted with hook (4 m/s) and uppercut (3 m/s) punches. A reference sensor (REF) was rigidly attached to the base of the skull, impact kinematics were transformed to the head center of gravity and linear and angular kinematic data were compared to the iMGs including Peak Linear Acceleration, Peak Angular Acceleration, Peak Angular Velocity, Head Injury Criterion (HIC), HIC duration, and Brain Injury Criterion. RESULTS: Compared to the REF sensor, the PRE iMG underpredicted most of the kinematic data with slopes of the validation regression line between 0.72 and 1.04 and the DTS overpredicted all the kinematic data with slopes of the regression line between 1.4 and 8.7. CONCLUSION: While the PRE iMG was closer to the REF sensor compared to the DTS iMG, the results did not support the previous findings reported with use of ATDs. Hence, our study highlights the benefits of using PMHS for validating the accuracy of iMGs since they closely mimic the human body compared to any ATD's mandible.

Primary Creep Characterization in Porcine Lumbar Spine Subject to Repeated Loading.

Low back pain (LBP) is a common medical condition worldwide, though the etiology of injuries causing most LBP is unknown. Flexion and repeated compression increase lumbar injury risk, yet the complex viscoelastic behavior of the lumbar spine has not been characterized under this loading scheme. Characterizing the non-injurious primary creep behavior in the lumbar spine is necessary for understanding the biomechanical response preceding injury. Fifteen porcine lumbar spinal units were loaded in repeated flexion-compression with peak compressive stresses ranging from 1.41 to 4.68 MPa. Applied loading simulated real loading exposures experienced by high-speed watercraft occupants. The strain response in the primary creep region was modeled for all tests using a generalized Kelvin-Voigt model. A quasilinear viscoelastic (QLV) approach was used to separate time-dependent (creep) and stress-dependent (elastic) responses. Optimizations between the models and experimental data determined creep time constants, creep coefficients, and elastic constants associated with this tissue under repeated flexion-compression loading. Average R2 for all fifteen models was 0.997. Creep time constants optimized across all fifteen models were 24 s and 580 s and contributed to 20 ± 3% and 30 ± 3% of the overall strain response, respectively. The non-transient behavior contributed to 50 ± 0% of the overall response. Elastic behavior for this porcine population had an average standard deviation of 24.5% strain across the applied stress range. The presented primary creep characterization provides the response precursor to injurious behavior in the lumbar spine. Results from this study can further inform lumbar injury prediction and kinematic models.

Biofidelity and Limitations of Instrumented Mouthguard Systems for Assessment of Rigid Body Head Kinematics.

Instrumented mouthguard systems (iMGs) are commonly used to study rigid body head kinematics across a variety of athletic environments. Previous work has found good fidelity for iMGs rigidly fixed to anthropomorphic test device (ATD) headforms when compared to reference systems, but few validation studies have focused on iMG performance in human cadaver heads. Here, we examine the performance of two boil-and-bite style iMGs in helmeted cadaver heads. Three unembalmed human cadaver heads were fitted with two instrumented boil-and-bite mouthguards [Prevent Biometrics and Diversified Technical Systems (DTS)] per manufacturer instructions. Reference sensors were rigidly fixed to each specimen. Specimens were fitted with a Riddell SpeedFlex American football helmet and impacted with a rigid impactor at three velocities and locations. All impact kinematics were compared at the head center of gravity. The Prevent iMG performed comparably to the reference system up to ~ 60 g in linear acceleration, but overall had poor correlation (CCC = 0.39). Prevent iMG angular velocity and BrIC generally well correlated with the reference, while underestimating HIC and overestimating HIC duration. The DTS iMG consistently overestimated the reference across all measures, with linear acceleration error ranging from 10 to 66%, and angular acceleration errors greater than 300%. Neither iMG demonstrated consistent agreement with the reference system. While iMG validation efforts have utilized ATD testing, this study highlights the need for cadaver testing and validation of devices intended for use in-vivo, particularly when considering realistic (non-idealized) sensor-skull coupling, when accounting for interactions with the mandible and when subject-specific anatomy may affect device performance.

Head Impact Telemetry System's Video-based Impact Detection and Location Accuracy.

PURPOSE: This study aimed to quantify the Head Impact Telemetry (HIT) System's impact detection and location measurement accuracy using an impact biomechanics data set paired with video of high school football special teams plays. METHODS: The head impact biomechanics data set and video were collected from 22 high school football players, wearing HIT System instrumented helmets, competing in 218 special teams plays over a single high school football season. We used two separate video analysis approaches. To quantify the impact detection accuracy, we evaluated the video for head impacts independently of the impact data collection triggers collected by the HIT System. Video-observed impacts matched to valid and invalid head impacts by the HIT System algorithm were categorized as true positives, false positives, false negatives, and true negatives. To quantify impact location accuracy, we analyzed video-synchronized head impacts for impact location independent of the HIT System's impact location measurement and quantified the estimated percent agreement of impact location between the HIT System recorded impact location and the impact location observed on video. RESULTS: The HIT System's impact-filtering algorithm had 69% sensitivity, 72% specificity, and 70% accuracy in categorizing true and non-head impact data collection triggers. The HIT System agreed with video-observed impact locations on 64% of the 129 impacts we analyzed (unweighted k = 0.43, 95% confidence interval = 0.31-0.54). CONCLUSION: This work provides data on the HIT System's impact detection and location accuracy during high school football special teams plays using game video analysis that has not been previously published. Based on our data, we believe that the HIT System is useful for estimating population-based impact location distributions for special teams plays.

The response of the pediatric head to impacts onto a rigid surface.

The study of pediatric head injury relies heavily on the use of finite element models and child anthropomorphic test devices (ATDs). However, these tools, in the context of pediatric head injury, have yet to be validated due to a paucity of pediatric head response data. The goal of this study is to investigate the response and injury tolerance of the pediatric head to impact. Twelve pediatric heads were impacted in a series of drop tests. The heads were dropped onto five impact locations (forehead, occiput, vertex and right and left parietal) from drop heights of 15 and 30 cm. The head could freely fall without rotation onto a flat 19 mm thick platen. The impact force was measured using a 3-axis piezoelectric load cell attached to the platen. Age and drop height were found to be significant factors in the impact response of the pediatric head. The head acceleration (14%-15 cm; 103-30 cm), Head Injury Criterion (HIC) (253%-15 cm; 154%-30 cm) and impact stiffness (5800%-15 cm; 3755%-30 cm) when averaged across all impact locations increased with age from 33 weeks gestation to 16 years, while the pulse duration (66%-15 cm; 53%-30 cm) decreased with age. Increases in head acceleration, HIC and impact stiffness were also observed with increased drop height, while pulse duration decreased with increased drop height. One important observation was that three of the four cadaveric heads between the ages of 5-months and 22-months sustained fractures from the 15 cm and 30 cm drop heights. The 5-month-old sustained a right parietal linear fracture while the 11- and 22-month-old sustained diastatic linear fractures.

The role of cervical muscles in mitigating concussion.

OBJECTIVES: Increased neck strength has been hypothesized to lower sports related concussion risk, but lacks experimental evidence. The goal is to investigate the role cervical muscle strength plays in blunt impact head kinematics and the biofidelity of common experimental neck conditions. We hypothesize head kinematics do not vary with neck activation due to low short term human head-to-neck coupling; because of the lack of coupling, free-head experimental conditions have higher biofidelity than Hybrid III necks. METHODS: Impacts were modeled using the Duke University Head and Neck Model. Four impact types were simulated with six neck conditions at eight impact positions. Peak resultant linear acceleration, peak resultant angular acceleration, Head Injury Criterion, and Head Impact Power compared concussion risk. To determine significance, maximum metric difference between activation states were compared to critical effect sizes (literature derived differences between mild and severe impact metrics). RESULTS: Maximum differences between activation conditions did not exceed critical effect sizes. Kinematic differences from impact location and strength can be ten times cervical muscle activation differences. Hybrid III and free-head linear acceleration metrics were 6±1.0% lower and 12±1.5% higher than relaxed condition respectively. Hybrid III and free-head angular acceleration metrics were 12±4.0% higher and 2±2.7% lower than relaxed condition respectively. CONCLUSIONS: Results from a validated neck model suggest increased cervical muscle force does not influence short term (<50ms) head kinematics in four athletically relevant scenarios. Impact location and magnitude influence head kinematics more than cervical muscle state. Biofidelic limitations of both Hybrid III and free-head experimental conditions must be considered.

Bandwidth and sample rate requirements for wearable head impact sensors.

Wearable inertial sensors measure human head impact kinematics important to the on-going development and validation of head injury criteria. However, sensor specifications have not been scientifically justified in the context of the anticipated field impact dynamics. The objective of our study is to determine the minimum bandwidth and sample rate required to capture the impact frequency response relevant to injury. We used high-bandwidth head impact data as ground-truth measurements, and investigated the attenuation of various injury criteria at lower bandwidths. Given a 10% attenuation threshold, we determined the minimum bandwidths required to study injury criteria based on skull kinematics and brain deformation in three different model systems: helmeted cadaver (no neck), unhelmeted cadaver (no neck), and helmeted dummy impacts (with neck). We found that higher bandwidths are required for unhelmeted impacts in general and for studying strain rate injury criteria. Minimum gyroscope bandwidths of 300Hz in helmeted sports and 500Hz in unhelmeted sports are necessary to study strain rate based injury criteria. A minimum accelerometer bandwidth of 500Hz in unhelmeted sports is necessary to study most injury criteria. Current devices typically sample at 1000Hz, with gyroscope bandwidths below 200Hz, which are not always sufficient according to these requirements. With hard contact test conditions, the identified requirements may be higher than most soft contacts on the field, but should be satisfied to capture the worst contact, and often higher risk, scenarios relative to the specific sport or activity. Our findings will help establish standard guidelines for sensor choice and design in traumatic brain injury research.

Effect of the mandible on mouthguard measurements of head kinematics.

Wearable sensors are becoming increasingly popular for measuring head motions and detecting head impacts. Many sensors are worn on the skin or in headgear and can suffer from motion artifacts introduced by the compliance of soft tissue or decoupling of headgear from the skull. The instrumented mouthguard is designed to couple directly to the upper dentition, which is made of hard enamel and anchored in a bony socket by stiff ligaments. This gives the mouthguard superior coupling to the skull compared with other systems. However, multiple validation studies have yielded conflicting results with respect to the mouthguard׳s head kinematics measurement accuracy. Here, we demonstrate that imposing different constraints on the mandible (lower jaw) can alter mouthguard kinematic accuracy in dummy headform testing. In addition, post mortem human surrogate tests utilizing the worst-case unconstrained mandible condition yield 40% and 80% normalized root mean square error in angular velocity and angular acceleration respectively. These errors can be modeled using a simple spring-mass system in which the soft mouthguard material near the sensors acts as a spring and the mandible as a mass. However, the mouthguard can be designed to mitigate these disturbances by isolating sensors from mandible loads, improving accuracy to below 15% normalized root mean square error in all kinematic measures. Thus, while current mouthguards would suffer from measurement errors in the worst-case unconstrained mandible condition, future mouthguards should be designed to account for these disturbances and future validation testing should include unconstrained mandibles to ensure proper accuracy.

The compressive stiffness of human pediatric heads.

Head injury is a persistent and costly problem for both children and adults. Globally, approximately 10 million people are hospitalized each year for head injuries. Knowing the structural properties of the head is important for modeling the response of the head in impact, and for providing insights into mechanisms of head injury. Hence, the goal of this study was to measure the sub-injurious structural stiffness of whole pediatric heads. 12 cadaveric pediatric (20-week-gestation to 16 years old) heads were tested in a battery of viscoelastic compression tests. The heads were compressed in both the lateral and anterior-posterior directions to 5% of gauge length at normalized deformation rates of 0.0005/s, 0.01/s, 0.1/s, and 0.3/s. Because of the non-linear nature of the response, linear regression models were used to calculate toe region (<2.5%) and elastic region (>2.5%) stiffness separately so that meaningful comparisons could be made across rate, age, and direction. The results showed that age was the dominant factor in predicting the structural stiffness of the human head. A large and statistically significant increase in the stiffness of both the toe region and the elastic region was observed with increasing age (p<0.0001), but no significant difference was seen across direction or normalized deformation rate. The stiffness of the elastic region increased from as low as 5 N/mm in the neonate to >4500 N/mm in the 16 year old. The changes in stiffness with age may be attributed to the disappearance of soft sutures and the thickening of skull bones with age.

The response of the adult and ATD heads to impacts onto a rigid surface.

Given the high incidence of TBI, head injury has been studied extensively using both cadavers and anthropomorphic test devices (ATDs). However, few studies have benchmarked the response of ATD heads against human data. Hence, the objective of this study is to investigate the response of adult and ATD heads in impact, and to compare adult Hybrid III head responses to the adult head responses. In this study, six adult human heads and seven ATD heads were used to obtain impact properties. The heads were dropped from both 15cm and 30cm onto five impact locations: right and left parietal, forehead, occiput and vertex. One set of drops were performed on the human heads and up to four sets were carried out on the ATD heads. For each drop, the head was placed into a fine net and positioned to achieve the desired drop height and impact location. The head was then released to allow free fall without rotation onto a flat aluminum 34 -inch thick platen. The platen was attached to a three-axis piezoelectric load cell to measure the impact force. The peak resultant acceleration, head impact criterion (HIC) and impact stiffness were calculated using the force/time curve and drop mass. No statistical differences were found between the adult human heads and the adult Hybrid III head for 15cm and 30cm impacts (p>0.05). For the human heads, the mid-sagittal impact locations produced the highest HIC and peak acceleration values. The parietal impacts produced HICs and peak accelerations that were 26-48% lower than those from the mid-sagittal impacts. For the ATD heads, the acceleration and HIC values generally increased with represented age, except for the Q3, which produced HIC values up to higher than the other ATD heads. The impact responses of the adult Hybrid III onto different impact locations were found to adequately represent the impact stiffness of human adult head impacts from 30cm and below onto a rigid surface. The Q3 dummy consistently produced the highest HIC values of the ATD heads, and produced higher acceleration and HIC values than the adult human heads as well, which is contrary to neonatal data demonstrating that the head acceleration increases with age.

Pediatric head and neck dynamics in frontal impact: analysis of important mechanical factors and proposed neck performance corridors for 6- and 10-year-old ATDs.

OBJECTIVE: Traumatic injuries are the leading cause of death of children aged 1-19 in the United States and are principally caused by motor vehicle collisions, with the head being the primary region injured. The neck, though not commonly injured, governs head kinematics and thus influences head injury. Vehicle improvements necessary to reduce these injuries are evaluated using anthropomorphic testing devices (ATDs). Current pediatric ATD head and neck properties were established by scaling adult properties using the size differences between adults and children. Due to the limitations of pediatric biomechanical research, computational models are the only available methods that combine all existing data to produce injury-relevant biofidelity specifications for ATDs. The purpose of this study is to provide the first frontal impact biofidelity corridors for neck flexion response of 6- and 10-year-olds using validated computational models, which are compared to the Hybrid III (HIII) ATD neck responses and the Mertz flexion corridors. METHODS: Our virtual 6- and 10-year-old head and neck multibody models incorporate pediatric biomechanical properties obtained from pediatric cadaveric and radiological studies, include the effect of passive and active musculature, and are validated with data including pediatric volunteer 3 g dynamic frontal impact responses. We simulate ATD pendulum tests-used to calibrate HIII neck bending stiffness-to compare the pediatric model and HIII ATD neck bending stiffness and to compare the model flexion bending responses with the Mertz scaled neck flexion corridors. Additionally, pediatric response corridors for pendulum calibration tests and high-speed (15 g) frontal impacts are estimated through uncertainty analyses on primary model variables, with response corridors calculated from the average ± SD response over 650 simulations. RESULTS AND CONCLUSIONS: The models are less stiff in dynamic anterioposterior bending than the ATDs; the secant stiffness of the 6- and 10-year-old models is 53 and 67 percent less than that of the HIII ATDs. The ATDs exhibit nonlinear stiffening and the models demonstrate nonlinear softening. Consequently, the models do not remain within the Mertz scaled flexion bending corridors. The more compliant model necks suggest an increased potential for head impact via larger head excursions. The pediatric anterioposterior bending corridors developed in this study are extensible to any frontal loading condition through calculation and sensitivity analysis. The corridors presented in this study are the first based on pediatric cadaveric data and provide the basis for future, more biofidelic, designs of 6- and 10-year-old ATD necks.

Importance of muscle activations for biofidelic pediatric neck response in computational models.

OBJECTIVE: During dynamic injury scenarios, such as motor vehicle crashes, neck biomechanics contribute to head excursion and acceleration, influencing head injuries. One important tool in understanding head and neck dynamics is computational modeling. However, realistic and stable muscle activations for major muscles are required to realize meaningful kinematic responses. The objective was to determine cervical muscle activation states for 6-year-old, 10-year-old, and adult 50th percentile male computational head and neck models. Currently, pediatric models including muscle activations are unable to maintain the head in an equilibrium position, forcing models to begin from nonphysiologic conditions. Recent work has realized a stationary initial geometry and cervical muscle activations by first optimizing responses against gravity. Accordingly, our goal was to apply these methods to Duke University's head-neck model validated using living muscle response and pediatric cadaveric data. METHODS: Activation schemes maintaining an upright, stable head for 22 muscle pairs were found using LS-OPT. Two optimization problems were investigated: a relaxed state, which minimized muscle fatigue, and a tensed activation state, which maximized total muscle force. The model's biofidelity was evaluated by the kinematic response to gravitational and frontal impact loading conditions. Model sensitivity and uncertainty analyses were performed to assess important parameters for pediatric muscle response. Sensitivity analysis was conducted using multiple activation time histories. These included constant activations and an optimal muscle activation time history, which varied the activation level of flexor and extensor groups, and activation initiation and termination times. RESULTS: Relaxed muscle activations decreased with increasing age, maintaining upright posture primarily through extensor activation. Tensed musculature maintained upright posture through coactivation of flexors and extensors, producing up to 32 times the force of the relaxed state. Without muscle activation, the models fell into flexion due to gravitational loading. Relaxed musculature produced 28.6-35.8 N of force to the head, whereas tensed musculature produced 450-1023 N. Pediatric model stiffnesses were most sensitive to muscle physiological cross-sectional area. CONCLUSIONS: Though muscular loads were not large enough to cause vertebral compressive failure, they would provide a prestressed state that could protect the vertebrae during tensile loading but might exacerbate risk during compressive loading. For example, in the 10-year-old, a load of 602 N was produced, though estimated compressive failure tolerance is only 2.8 kN. Including muscles and time-variant activation schemes is vital for producing biofidelic models because both vary by age. The pediatric activations developed represent physiologically appropriate sets of initial conditions and are based on validated adult cadaveric data.

Tensile failure properties of the perinatal, neonatal, and pediatric cadaveric cervical spine.

STUDY DESIGN: Biomechanical tensile testing of perinatal, neonatal, and pediatric cadaveric cervical spines to failure. OBJECTIVE: To assess the tensile failure properties of the cervical spine from birth to adulthood. SUMMARY OF BACKGROUND DATA: Pediatric cervical spine biomechanical studies have been few due to the limited availability of pediatric cadavers. Therefore, scaled data based on human adult and juvenile animal studies have been used to augment the limited pediatric cadaver data. Despite these efforts, substantial uncertainty remains in our understanding of pediatric cervical spine biomechanics. METHODS: A total of 24 cadaveric osteoligamentous head-neck complexes, 20 weeks gestation to 18 years, were sectioned into segments (occiput-C2 [O-C2], C4-C5, and C6-C7) and tested in tension to determine axial stiffness, displacement at failure, and load-to-failure. RESULTS: Tensile stiffness-to-failure (N/mm) increased by age (O-C2: 23-fold, neonate: 22 ± 7, 18 yr: 504; C4-C5: 7-fold, neonate: 71 ± 14, 18 yr: 509; C6-C7: 7-fold, neonate: 64 ± 17, 18 yr: 456). Load-to-failure (N) increased by age (O-C2: 13-fold, neonate: 228 ± 40, 18 yr: 2888; C4-C5: 9-fold, neonate: 207 ± 63, 18 yr: 1831; C6-C7: 10-fold, neonate: 174 ± 41, 18 yr: 1720). Normalized displacement at failure (mm/mm) decreased by age (O-C2: 6-fold, neonate: 0.34 ± 0.076, 18 yr: 0.059; C4-C5: 3-fold, neonate: 0.092 ± 0.015, 18 yr: 0.035; C6-C7: 2-fold, neonate: 0.088 ± 0.019, 18 yr: 0.037). CONCLUSION: Cervical spine tensile stiffness-to-failure and load-to-failure increased nonlinearly, whereas normalized displacement at failure decreased nonlinearly, from birth to adulthood. Pronounced ligamentous laxity observed at younger ages in the O-C2 segment quantitatively supports the prevalence of spinal cord injury without radiographic abnormality in the pediatric population. This study provides important and previously unavailable data for validating pediatric cervical spine models, for evaluating current scaling techniques and animal surrogate models, and for the development of more biofidelic pediatric crash test dummies.

An apparatus for tensile and bending tests of perinatal, neonatal, pediatric and adult cadaver osteoligamentous cervical spines.

Investigations of biomechanical properties of pediatric cadaver cervical spines subjected to tensile or bending modes of loading are generally limited by a lack of available tissue and limiting sample sizes, both per age and across age ranges. It is therefore important to develop fixation techniques capable of testing individual cadavers in multiple modes of loading to obtain more biomechanical data per subject. In this study, an experimental apparatus and fixation methodology was developed to accommodate cadaver osteoligamentous head-neck complexes from around birth (perinatal) to full maturation (adult) [cervical length: 2.5-12.5 cm; head breadth: 6-15 cm; head length: 6-19 cm] and sequentially test the whole cervical spine in tension, the upper cervical spine in bending and the upper cervical spine in tension. The experimental apparatus and the fixation methodology provided a rigid casting of the head during testing and did not compromise the skull. Further testing of the intact skull and sub-cranial material was made available due to the design of the apparatus and fixation techniques utilized during spinal testing. The stiffness of the experimental apparatus and fixation technique are reported to better characterize the cervical spine stiffness data obtained from the apparatus. The apparatus and fixation technique stiffness was 1986 N/mm. This experimental system provides a stiff and consistent platform for biomechanical testing across a broad age range and under multiple modes of loading.

Expansion and evaluation of data characterizing the structural behavior of the pediatric abdomen.

Despite the importance of abdominal injuries in children involved in motor vehicle collisions, only two papers have reported experimental data quantifying the pediatric abdominal response to belt loading. One developed and characterized a porcine model of the pediatric abdomen and the other presented a series of tests performed on a single pediatric (7-year-old female) post-mortem human subject (PMHS) and used the data to evaluate the efficacy of the porcine model. The current paper presents the results from an additional pediatric (6-year-old female) PMHS test series and an expanded evaluation of the porcine model using the combined PMHS data. The two PMHS exhibited remarkably similar abdominal stiffness, both by level (upper and lower) and by rate (quasi-static and ∼2 m/s dynamic). Both PMHS and swine exhibited the same stiffness trend by abdominal level (lower stiffer than upper: 3444 N reaction force at 30.5 mm of displacement compared to 1756 N in the 6-year-old dynamic tests). The magnitude of lower abdomen stiffness was slightly less in the swine than in the PMHS (the average dynamic PMHS response was 1086 N greater than the porcine envelopes at 30.5 mm displacement) while the upper abdomen PMHS responses fit within the porcine response envelope.

Tension and combined tension-extension structural response and tolerance properties of the human male ligamentous cervical spine.

Tensile loading of the human cervical spine results from noncontact inertial loading of the head as well as mandibular and craniofacial impacts. Current vehicle safety standards include a neck injury criterion based on beam theory that uses a linear combination of the normalized upper cervical axial force and sagittal plane moment. This study examines this criterion by imposing combined axial tension and bending to postmortem human subject (PMHS) ligamentous cervical spines. Tests were conducted on 20 unembalmed PMHSs. Nondestructive whole cervical spine tensile tests with varying cranial end condition and anteroposterior loading location were used to generate response corridors for computational model development and validation. The cervical spines were sectioned into three functional spinal segments (Occiput-C2, C4-C5, and C6-C7) for measurement of tensile structural response and failure testing. The upper cervical spine (Occiput-C2) was found to be significantly less stiff, absorb less strain energy, and fail at higher loads than the lower cervical spine (C4-C5 and C6-C7). Increasing the moment arm of the applied tensile load resulted in larger head rotations, larger moments, and significantly higher tensile ultimate strengths in the upper cervical spine. The strength of the upper cervical spine when loaded through the head center of gravity (2417+/-215 N) was greater than when loaded over the occipital condyles (2032+/-250 N), which is not predicted by beam theory. Beam theory predicts that increased tensile loading eccentricity results in decreased axial failure loads. Analyses of the force-deflection histories suggest that ligament loading in the upper cervical spine depends on the amount of head rotation orientation, which may explain why the neck is stronger in combined tension and extension.

Pediatric thoracoabdominal biomechanics.

No experimental data exist quantifying the force-deformation behavior of the pediatric chest when subjected to non-impact, dynamic loading from a diagonal belt or a distributed loading surface. Kent et al. (2006) previously published juvenile abdominal response data collected using a porcine model. This paper reports on a series of experiments on a 7-year-old pediatric post-mortem human subject (PMHS) undertaken to guide the scaling of existing adult thoracic response data for application to the child and to assess the validity of the porcine abdominal model. The pediatric PMHS exhibited abdominal response similar to the swine, including the degree of rate sensitivity. The upper abdomen of the PMHS was slightly stiffer than the porcine behavior, while the lower abdomen of the PMHS fit within the porcine corridor. Scaling of adult thoracic response data using any of four published techniques did not successfully predict the pediatric behavior. All of the scaling techniques intrinsically reduce the stiffness of the adult response, when in reality the pediatric subject was as stiff as, or slightly more stiff than, published adult corridors. An assessment of age-related changes in thoracic stiffness indicated that for both a CPR patient population and dynamic diagonal belt loading on a PMHS population, the effective stiffness of the chest increases through the fourth decade of life and then decreases, resulting in stiffness values approximately the same for children and for elderly adults. Additional research is needed to elucidate the generality of this finding and to assess its significance for scaling adult data to represent pediatric responses.