Experimental observation of permeability changes in dolomite at CO2 sequestration conditions.

Injection of cool CO2 into geothermally warm carbonate reservoirs for storage or geothermal energy production may lower near-well temperature and lead to mass transfer along flow paths leading away from the well. To investigate this process, a dolomite core was subjected to a 650 h, high pressure, CO2 saturated, flow-through experiment. Permeability increased from 10(-15.9) to 10(-15.2) m(2) over the initial 216 h at 21 °C, decreased to 10(-16.2) m(2) over 289 h at 50 °C, largely due to thermally driven CO2 exsolution, and reached a final value of 10(-16.4) m(2) after 145 h at 100 °C due to continued exsolution and the onset of dolomite precipitation. Theoretical calculations show that CO2 exsolution results in a maximum pore space CO2 saturation of 0.5, and steady state relative permeabilities of CO2 and water on the order of 0.0065 and 0.1, respectively. Post-experiment imagery reveals matrix dissolution at low temperatures, and subsequent filling-in of flow passages at elevated temperature. Geochemical calculations indicate that reservoir fluids subjected to a thermal gradient may exsolve and precipitate up to 200 cm(3) CO2 and 1.5 cm(3) dolomite per kg of water, respectively, resulting in substantial porosity and permeability redistribution.

Permeability reduction produced by grain reorganization and accumulation of exsolved CO2 during geologic carbon sequestration: a new CO2 trapping mechanism.

Carbon sequestration experiments were conducted on uncemented sediment and lithified rock from the Eau Claire Formation, which consisted primarily of K-feldspar and quartz. Cores were heated to accentuate reactivity between fluid and mineral grains and to force CO(2) exsolution. Measured permeability of one sediment core ultimately reduced by 4 orders of magnitude as it was incrementally heated from 21 to 150 °C. Water-rock interaction produced some alteration, yielding sub-µm clay precipitation on K-feldspar grains in the core's upstream end. Experimental results also revealed abundant newly formed pore space in regions of the core, and in some cases pores that were several times larger than the average grain size of the sediment. These large pores likely formed from elevated localized pressure caused by rapid CO(2) exsolution within the core and/or an accumulating CO(2) phase capable of pushing out surrounding sediment. CO(2) filled the pores and blocked flow pathways. Comparison with a similar experiment using a solid arkose core indicates that CO(2) accumulation and grain reorganization mainly contributed to permeability reduction during the heated sediment core experiment. This suggests that CO(2) injection into sediments may store more CO(2) and cause additional permeability reduction than is possible in lithified rock due to grain reorganization.

Classification of thermal patterns at karst springs and cave streams.

Thermal patterns of karst springs and cave streams provide potentially useful information concerning aquifer geometry and recharge. Temperature monitoring at 25 springs and cave streams in southeastern Minnesota has shown four distinct thermal patterns. These patterns can be divided into two types: those produced by flow paths with ineffective heat exchange, such as conduits, and those produced by flow paths with effective heat exchange, such as small fractures and pore space. Thermally ineffective patterns result when water flows through the aquifer before it can equilibrate to the rock temperature. Thermally ineffective patterns can be either event-scale, as produced by rainfall or snowmelt events, or seasonal scale, as produced by input from a perennial surface stream. Thermally effective patterns result when water equilibrates to rock temperature, and the patterns displayed depend on whether the aquifer temperature is changing over time. Shallow aquifers with seasonally varying temperatures display a phase-shifted seasonal signal, whereas deeper aquifers with constant temperatures display a stable temperature pattern. An individual aquifer may display more than one of these patterns. Since karst aquifers typically contain both thermally effective and ineffective routes, we argue that the thermal response is strongly influenced by recharge mode.