Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 24
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Energy Environ Sci ; 17(12): 4137-4146, 2024 Jun 18.
Artigo em Inglês | MEDLINE | ID: mdl-38899028

RESUMO

Controlling solid electrolyte interphase (SEI) in batteries is crucial for their efficient cycling. Herein, we demonstrate an approach to enable robust battery performance that does not rely on high fractions of fluorinated species in electrolytes, thus substantially decreasing the environmental footprint and cost of high-energy batteries. In this approach, we use very low fractions of readily reducible fluorinated cations in electrolyte (∼0.1 wt%) and employ electrostatic attraction to generate a substantial population of these cations at the anode surface. As a result, we can form a robust fluorine-rich SEI that allows for dendrite-free deposition of dense Li and stable cycling of Li-metal full cells with high-voltage cathodes. Our approach represents a general strategy for delivering desired chemical species to battery anodes through electrostatic attraction while using minute amounts of additive.

2.
ACS Nano ; 18(14): 10124-10132, 2024 Apr 09.
Artigo em Inglês | MEDLINE | ID: mdl-38511608

RESUMO

MXenes are 2D transition metal carbides, nitrides, and/or carbonitrides that can be intercalated with cations through chemical or electrochemical pathways. While the insertion of alkali and alkaline earth cations into Ti3C2Tx MXenes is well studied, understanding of the intercalation of redox-active transition metal ions into MXenes and its impact on their electronic and electrochemical properties is lacking. In this work, we investigate the intercalation of Cu ions into Ti3C2Tx MXene and its effect on its electronic and electrochemical properties. Using X-ray absorption spectroscopy (XAS) and ab initio molecular dynamics (AIMD), we observe an unusual phenomenon whereby Cu2+ ions undergo partial reduction upon intercalation from the solution into the MXene. Furthermore, using in situ XAS, we reveal changes in the oxidation states of intercalated Cu ions and Ti atoms during charging. We show that the pseudocapacitive response of Cu-MXene originates from the redox of both the Cu intercalant and Ti3C2Tx host. Despite highly reducing potentials, Cu ions inside the MXene show an excellent stability against full reduction upon charging. Our findings demonstrate how electronic coupling between Cu ions and Ti3C2Tx modifies electrochemical and electronic properties of the latter, providing the framework for the rational design and utilization of transition metal intercalants for tuning the properties of MXenes for various electrochemical systems.

3.
Chem Mater ; 36(3): 1308-1317, 2024 Feb 13.
Artigo em Inglês | MEDLINE | ID: mdl-38385123

RESUMO

Photoacids are organic molecules that release protons under illumination, providing spatiotemporal control of the pH. Such light-driven pH switches offer the ability to cyclically alter the pH of the medium and are highly attractive for a wide variety of applications, including CO2 capture. Although photoacids such as protonated merocyanine can enable fully reversible pH cycling in water, they have a limited chemical stability against hydrolysis (<24 h). Moreover, these photoacids have low solubility, which limits the pH-switching ability in a buffered solution such as dissolved CO2. In this work, we introduce a simple pathway to dramatically increase stability and solubility of photoacids by tuning their solvation environment in binary solvent mixtures. We show that a preferential solvation of merocyanine by aprotic solvent molecules results in a 60% increase in pH modulation magnitude when compared to the behavior in pure water and can withstand stable cycling for >350 h. Our results suggest that a very high stability of merocyanine photoacids can be achieved in the right solvent mixtures, offering a way to bypass complex structural modifications of photoacid molecules and serving as the key milestone toward their application in a photodriven CO2 capture process.

4.
Biomater Sci ; 11(24): 7826-7837, 2023 Dec 05.
Artigo em Inglês | MEDLINE | ID: mdl-37878039

RESUMO

Radiotherapy is a cornerstone of cancer treatment. However, due to the low tissue specificity of ionizing radiation, damage to the surrounding healthy tissue of the tumor remains a significant challenge. In recent years, radio-enhancers based on inorganic nanomaterials have gained considerable interest. Beyond the widely explored metal and metal oxide nanoparticles, 2D materials, such as MXenes, could present potential benefits because of their inherently large specific surface area. In this study, we highlight the promising radio-enhancement properties of Ti3C2Tx MXenes. We demonstrate that atomically thin layers of titanium carbides (Ti3C2Tx MXenes) are efficiently internalized and well-tolerated by mammalian cells. Contrary to MXenes suspended in aqueous buffers, which fully oxidize within days, yielding rice-grain shaped rutile nanoparticles, the MXenes internalized by cells oxidize at a slower rate. This is consistent with cell-free experiments that have shown slower oxidation rates in cell media and lysosomal buffers compared to dispersants without antioxidants. Importantly, the MXenes exhibit robust radio-enhancement properties, with dose enhancement factors reaching up to 2.5 in human soft tissue sarcoma cells, while showing no toxicity to healthy human fibroblasts. When compared to oxidized MXenes and commercial titanium dioxide nanoparticles, the intact 2D titanium carbide flakes display superior radio-enhancement properties. In summary, our findings offer evidence for the potent radio-enhancement capabilities of Ti3C2Tx MXenes, marking them as a promising candidate for enhancing radiotherapy.


Assuntos
Nanopartículas Metálicas , Sarcoma , Humanos , Animais , Raios X , Titânio/farmacologia , Sarcoma/radioterapia , Antioxidantes , Óxidos , Mamíferos
6.
ACS Nano ; 15(10): 15422-15428, 2021 Oct 26.
Artigo em Inglês | MEDLINE | ID: mdl-34546032

RESUMO

In this Perspective, we sketch out a vision of fast charging and self-healable energy systems that are primarily organic, feature only abundant elements, and operate with ions other than lithium. Using conductive oligomers as highly configurable building blocks, it is possible to create intrinsically adaptable conductive polymeric networks that can be rejuvenated and recycled using simple and safe chemical treatments. Using the versatile organic chemistry toolbox, these oligomers can be further functionalized, for example, with redox-active side chains for high charge storage capacity and ligands capable of complexing metal centers. Cross-linking with metal ions converts the soluble oligomers into insoluble supramolecular networks to yield high-performing electrode materials. The oligomer-based approach can thus provide an exceptional level of control to the design of organic-based battery materials.

7.
J Am Chem Soc ; 143(32): 12552-12559, 2021 Aug 18.
Artigo em Inglês | MEDLINE | ID: mdl-34357752

RESUMO

Despite the continuous progress in the research and development of Ti3C2Tx (MXene) electrodes for high-power batteries and supercapacitor applications, the role of the anions in the electrochemical energy storage and their ability to intercalate between the MXene sheets upon application of positive voltage have not been clarified. A decade after the discovery of MXenes, the information about the possibility of anion insertion into the restacked MXene electrode is still being questioned. Since the positive potential stability range in diluted aqueous electrolytes is severely limited by anodic oxidation of the Ti, the possibility of anion insertion was evaluated in concentrated aqueous electrolyte solutions and aprotic electrolytes as well. To address this issue, we have conducted in situ gravimetric electrochemical quartz crystal microbalance with dissipation monitoring (EQCM-D) measurements in highly concentrated LiCl and LiBr electrolytes, which enable a significant extension of the operation range of the MXene electrodes toward positive potentials. Also, halogens are among the smallest anions and should be easier to intercalate between MXene layers, in comparison to multiatomic anions. On the basis of mass change variations in the positive voltage range and complementary density functional theory calculations, it was demonstrated that insertion of anionic species into MXene, within the range of potentials of interest for capacitive energy storage, is not likely to occur. This can be explained by the strong negative charge on Ti3C2Tx sheets terminated by functional groups.

8.
J Phys Chem B ; 125(17): 4501-4513, 2021 May 06.
Artigo em Inglês | MEDLINE | ID: mdl-33904299

RESUMO

The concept of water-in-salt electrolytes was introduced recently, and these systems have been successfully applied to yield extended operation voltage and hence significantly improved energy density in aqueous Li-ion batteries. In the present work, results of X-ray scattering and Fourier-transform infrared spectra measurements over a wide range of temperatures and salt concentrations are reported for the LiTFSI (lithium bis(trifluoromethane sulfonyl)imide)-based water-in-salt electrolyte. Classical molecular dynamics simulations are validated against the experiments and used to gain additional information about the electrolyte structure. Based on our analyses, a new model for the liquid structure is proposed. Specifically, we demonstrate that at the highest LiTFSI concentration of 20 m the water network is disrupted, and the majority of water molecules exist in the form of isolated monomers, clusters, or small aggregates with chain-like configurations. On the other hand, TFSI- anions are connected to each other and form a network. This description is fundamentally different from those proposed in earlier studies of this system.

9.
ACS Nano ; 14(11): 15919-15925, 2020 Nov 24.
Artigo em Inglês | MEDLINE | ID: mdl-33166110

RESUMO

Recently, intrinsically conductive metal-organic frameworks (MOFs) have demonstrated promising performance in fast-charging energy storage applications and may outperform some current electrode materials (e.g., porous carbons) for supercapacitors in terms of both gravimetric and volumetric capacitance. In this report, we examine the mechanism of high capacitance in a nickel hexaaminobenzene-based MOF (NiHAB). Using a combination of in situ Raman and X-ray absorption spectroscopies, as well as detailed electrochemical studies in a series of aqueous electrolytes, we demonstrate that the charge storage mechanism is, in fact, a pH-dependent surface pseudocapacitance, and unlike typical inorganic systems, where transition metals change oxidation state during charge/discharge cycles, NiHAB redox activity is ligand-centered.

10.
Angew Chem Int Ed Engl ; 59(51): 23180-23187, 2020 Dec 14.
Artigo em Inglês | MEDLINE | ID: mdl-32881197

RESUMO

Super-concentrated "water-in-salt" electrolytes recently spurred resurgent interest for high energy density aqueous lithium-ion batteries. Thermodynamic stabilization at high concentrations and kinetic barriers towards interfacial water electrolysis significantly expand the electrochemical stability window, facilitating high voltage aqueous cells. Herein we investigated LiTFSI/H2 O electrolyte interfacial decomposition pathways in the "water-in-salt" and "salt-in-water" regimes using synchrotron X-rays, which produce electrons at the solid/electrolyte interface to mimic reductive environments, and simultaneously probe the structure of surface films using X-ray diffraction. We observed the surface-reduction of TFSI- at super-concentration, leading to lithium fluoride interphase formation, while precipitation of the lithium hydroxide was not observed. The mechanism behind this photoelectron-induced reduction was revealed to be concentration-dependent interfacial chemistry that only occurs among closely contact ion-pairs, which constitutes the rationale behind the "water-in-salt" concept.

12.
Phys Chem Chem Phys ; 18(7): 5099-102, 2016 Feb 21.
Artigo em Inglês | MEDLINE | ID: mdl-26818187

RESUMO

(1)H and (19)F NMR experiments have identified and quantified the internal surface terminations of Ti3C2Tx MXene. -F and -OH terminations are shown to be intimately mixed and there are found to be significantly fewer -OH terminations than -F and -O, with the proportions highly dependent on the synthesis method.

13.
Adv Mater ; 27(23): 3501-6, 2015 Jun 17.
Artigo em Inglês | MEDLINE | ID: mdl-25930685

RESUMO

2D Nb2CTx MXene flakes are produced using an amine-assisted delamination process. Upon mixing with carbon nanotubes and filtration, freestanding, flexible paper is produced. The latter exhibits high capacity and excellent stability when used as the electrode for Li-ion batteries and capacitors.

14.
Angew Chem Int Ed Engl ; 54(16): 4810-4, 2015 Apr 13.
Artigo em Inglês | MEDLINE | ID: mdl-25714491

RESUMO

Herein we electrochemically and selectively extract Ti from the MAX phase Ti2SC to form carbon/sulfur (C/S) nanolaminates at room temperature. The products are composed of multi-layers of C/S flakes, with predominantly amorphous and some graphene-like structures. Covalent bonding between C and S is observed in the nanolaminates, which render the latter promising candidates as electrode materials for Li-S batteries. We also show that it is possible to extract Ti from other MAX phases, such as Ti3AlC2, Ti3SnC2, and Ti2GeC, suggesting that electrochemical etching can be a powerful method to selectively extract the "M" elements from the MAX phases, to produce "AX" layered structures, that cannot be made otherwise. The latter hold promise for a variety of applications, such as energy storage, catalysis, etc.

15.
Adv Mater ; 27(2): 339-45, 2015 Jan 14.
Artigo em Inglês | MEDLINE | ID: mdl-25405330

RESUMO

Free-standing and flexible sandwich-like MXene/carbon nanotube (CNT) paper, composed of alternating MXene and CNT layers, is fabricated using a simple filtration method. These sandwich-like papers exhibit high volumetric capacitances, good rate performances, and excellent cycling stability when employed as electrodes in supercapacitors.

16.
Nature ; 516(7529): 78-81, 2014 Dec 04.
Artigo em Inglês | MEDLINE | ID: mdl-25470044

RESUMO

Safe and powerful energy storage devices are becoming increasingly important. Charging times of seconds to minutes, with power densities exceeding those of batteries, can in principle be provided by electrochemical capacitors--in particular, pseudocapacitors. Recent research has focused mainly on improving the gravimetric performance of the electrodes of such systems, but for portable electronics and vehicles volume is at a premium. The best volumetric capacitances of carbon-based electrodes are around 300 farads per cubic centimetre; hydrated ruthenium oxide can reach capacitances of 1,000 to 1,500 farads per cubic centimetre with great cyclability, but only in thin films. Recently, electrodes made of two-dimensional titanium carbide (Ti3C2, a member of the 'MXene' family), produced by etching aluminium from titanium aluminium carbide (Ti3AlC2, a 'MAX' phase) in concentrated hydrofluoric acid, have been shown to have volumetric capacitances of over 300 farads per cubic centimetre. Here we report a method of producing this material using a solution of lithium fluoride and hydrochloric acid. The resulting hydrophilic material swells in volume when hydrated, and can be shaped like clay and dried into a highly conductive solid or rolled into films tens of micrometres thick. Additive-free films of this titanium carbide 'clay' have volumetric capacitances of up to 900 farads per cubic centimetre, with excellent cyclability and rate performances. This capacitance is almost twice that of our previous report, and our synthetic method also offers a much faster route to film production as well as the avoidance of handling hazardous concentrated hydrofluoric acid.

17.
Chem Commun (Camb) ; 50(93): 14581-4, 2014 Dec 04.
Artigo em Inglês | MEDLINE | ID: mdl-25307164

RESUMO

Herein we demonstrate an approach to prepare a colloidal solution of strontium hexaferrite via a glass-ceramic route. The as obtained colloids are stable and resistive to aggregation or sedimentation. They reveal outstanding magnetic and magneto-optical properties because of their platelet-like anisotropic shape and high permanent magnetic moment.

18.
Chem Commun (Camb) ; 50(56): 7420-3, 2014 Jul 18.
Artigo em Inglês | MEDLINE | ID: mdl-24821374

RESUMO

Herein we show that heating 2D Ti3C2 in air results in TiO2 nanocrystals enmeshed in thin sheets of disordered graphitic carbon structures that can handle extremely high cycling rates when tested as anodes in lithium ion batteries. Oxidation of 2D Ti3C2 in either CO2 or pressurized water also resulted in TiO2-C hybrid structures. Similarly, other hybrids can be produced, as we show here for Nb2O5/C from 2D Nb2C.

19.
Chem Mater ; 26(7): 2374-2381, 2014 Apr 08.
Artigo em Inglês | MEDLINE | ID: mdl-24741204

RESUMO

Since the discovery of graphene, the quest for two-dimensional (2D) materials has intensified greatly. Recently, a new family of 2D transition metal carbides and carbonitrides (MXenes) was discovered that is both conducting and hydrophilic, an uncommon combination. To date MXenes have been produced as powders, flakes, and colloidal solutions. Herein, we report on the fabrication of ∼1 × 1 cm2 Ti3C2 films by selective etching of Al, from sputter-deposited epitaxial Ti3AlC2 films, in aqueous HF or NH4HF2. Films that were about 19 nm thick, etched with NH4HF2, transmit ∼90% of the light in the visible-to-infrared range and exhibit metallic conductivity down to ∼100 K. Below 100 K, the films' resistivity increases with decreasing temperature and they exhibit negative magnetoresistance-both observations consistent with a weak localization phenomenon characteristic of many 2D defective solids. This advance opens the door for the use of MXenes in electronic, photonic, and sensing applications.

20.
Angew Chem Int Ed Engl ; 53(19): 4877-80, 2014 May 05.
Artigo em Inglês | MEDLINE | ID: mdl-24692047

RESUMO

Porous carbons are widely used in energy storage and gas separation applications, but their synthesis always involves high temperatures. Herein we electrochemically selectively extract, at ambient temperature, the metal atoms from the ternary layered carbides, Ti3 AlC2 , Ti2 AlC and Ti3 SiC2 (MAX phases). The result is a predominantly amorphous carbide-derived carbon, with a narrow distribution of micropores. The latter is produced by placing the carbides in HF, HCl or NaCl solutions and applying anodic potentials. The pores that form when Ti3 AlC2 is etched in dilute HF are around 0.5 nm in diameter. This approach forgoes energy-intensive thermal treatments and presents a novel method for developing carbons with finely tuned pores for a variety of applications, such as supercapacitor, battery electrodes or CO2 capture.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...