Statistical analysis for explosives detection system test and evaluation.

The verification of trace explosives detection systems is often constrained to small sample sets, so it is important to support the significance of the results with statistical analysis. As binary measurements, the trials are assessed using binomial statistics. A method is described based on the probability confidence interval and expressed in terms of the upper confidence interval bound that reports the probability of successful detection and its level of statistical confidence. These parameters provide useful measures of the system's performance. The propriety of combining statistics for similar tests-for example in trace detection trials of an explosive on multiple surfaces-is examined by statistical tests. The use of normal statistics is commonly applied to binary testing, but the confidence intervals are known to behave poorly in many circumstances, including small sample numbers. The improvement of the normal approximation with increasing sample number is shown not to be substantial for the typical numbers used in this type of explosives detection system testing, and binary statistics are preferred. The methods and techniques described here for testing trace detection can be applied as well to performance testing of explosives detection systems in general.

Cations Derived from Fentanyls Generated by Atmospheric Pressure Photoionization in the Presence of Ammonia: An IMS-MS Study.

A set of fentanyl molecules when subjected to vacuum UV atmospheric pressure photoionization (VUV-APPI) in the presence of dopants (ammonia and anisole) shows two major bands in the ion mobility-mass spectrometry (IMS-MS) spectrum corresponding to (a) the protonated fentanyl, [M+H]+ and (b) a unique [M-74]+ ion. For the parent fentanyl, the [M-74]+ ion is at m/z 262 but, in the absence of ammonia, the product ion is shifted to m/z 245, corresponding to a difference of NH3. Collision-induced dissociations (CID) of the [M-74]+ ions for all the different fentanyls examined here show the same pattern of neutral losses, namely NH3 and HN=CH2, and the dominant product ion is at m/z 84 (shifted to m/z 98 for 3-methylfentanyl and m/z 142 and 231 for carfentanyl). Dissociation of the [M-74-NH3]+ ion derived from the fentanyls yields the same product ions as found in the electron impact (EI) ionization spectra of the fentanyls. The dissociation products of the [M-74-HN=CH2]+ ion are different, include the ion at m/z 84, and correspond to the fragmentation products of protonated norfentanyls. Theoretical modeling supports the opening of new fragmentation channels as a result of the reaction of the initially formed iminium cation with ammonia at atmospheric pressure.

Machine Learning Improves Trace Explosive Selectivity: Application to Nitrate-Based Explosives.

Ion mobility spectrometry (IMS) is the method of choice to detect trace amounts of explosives in most airports and border crossing settings. For most explosives, the IMS detection limits are suitably low enough to meet security requirements. However, for some explosive families, the selectivity is not sufficient. One such family is nitrate-based explosives, where discrimination between various nitrate threats and ambient nitrates is challenging. Using a small database, machine learning methods were utilized to examine the extent of improvement in IMS selectivity for detection of nitrate-based explosives. Five classes were considered in this preliminary study: ammonium nitrate (AN), an ∼95:5 mixture of AN and fuel oil (ANFO), urea nitrate (UN), nitrate due to environmental pollution, and samples that did not contain any explosive (blanks). The preliminary results clearly show that the incorporation of machine learning methods can lead to a significant improvement in IMS selectivity.

Tandem ion mobility spectrometry at ambient pressure and field decomposition of mobility selected ions of explosives and interferences.

A tandem ion mobility spectrometer at ambient pressure included a thermal desorption inlet, two drift regions, dual ion shutters, and a wire grid assembly in the second drift region. An ion swarm could be mobility isolated in the first drift region using synchronized dual ion shutters and decomposed in a wire grid assembly using electric fields of 1.80 × 104 V cm-1 (118 Td) from a 1.8 MHz sinusoidal waveform. Mobility selected ions that underwent field induced decomposition were NO3-, from PETN·Cl- and NG·Cl-, and NO2- from RDX·Cl-. The extent of decomposition ranged from 60 to 90%, depending on gas temperature, field strength, and ion identity, introducing additional controls to improve selectivity in trace determination of explosives. Ion transmission through the wire grid assembly ranged from 80 to >95% with losses increasing for increased field strength. Studies with pairs of explosives and interfering substances demonstrated decisive detection of explosives and portend reduced rates of false positive using tandem ion mobility spectrometers with a reactive stage.

Characterizing the gas phase ion chemistry of an ion trap mobility spectrometry based explosive trace detector using a tandem mass spectrometer.

A commercial-off-the-shelf (COTS) ion trap mobility spectrometry (ITMS) based explosive trace detector (ETD) has been interfaced to a triple quadrupole mass spectrometer (MS/MS) for the purpose of characterizing the gas phase ion chemistry intrinsic to the ITMS instrument. The overall objective of the research is to develop a fundamental understanding of the gas phase ionization processes in the ITMS based ETD to facilitate the advancement of its operational effectiveness as well as guide the development of next generation ETDs. Product ion masses, daughter ion masses, and reduced mobility values measured by the ITMS/MS/MS configuration for a suite of nitro, nitrate, and peroxide containing explosives are reported. Molecular formulas, molecular structures, and ionization pathways for the various product ions are inferred using the mass and mobility data in conjunction with density functional theory. The predominant product ions are identified as follows: [TNT-H](-) for trinitrotoluene (TNT), [RDX+Cl](-) for cyclo-1,3,5-trimethylene-2,4,6-trinitramine (RDX), [NO(3)](-) for ethylene glycol dinitrate (EGDN), [NG+NO(3)](-) for nitroglycerine (NG), [PETN+NO(3)](-) for pentaerythritol tetranitrate (PETN), [HNO(3)+NO(3)](-) for ammonium nitrate (NH(4)NO(3)), [HMTD-NC(3)H(6)O(3)+H+Cl](-) for hexamethylene triperoxide diamine (HMTD), and [(CH(3))(2)CNH(2)](+) for triacetone triperoxide (TATP). The predominant ionization pathways for the formation of the various product ions are determined to include proton abstraction, ion-molecule attachment, autoionization, first-order and multi-order thermolysis, and nucleophilic substitution. The ion trapping scheme in the reaction region of the ITMS instrument is shown to increase predominant ion intensities relative to the secondary ion intensities when compared to non-ion trap operation.

Interfacing an ion mobility spectrometry based explosive trace detector to a triple quadrupole mass spectrometer.

Hardware from a commercial-off-the-shelf (COTS) ion mobility spectrometry (IMS) based explosive trace detector (ETD) has been interfaced to an AB/SCIEX API 2000 triple quadrupole mass spectrometer. To interface the COTS IMS based ETD to the API 2000, the faraday plate of the IMS instrument and the curtain plate of the mass spectrometer were removed from their respective systems and replaced by a custom faraday plate, which was fabricated with a hole for passing the ion beam to the mass spectrometer, and a custom interface flange, which was designed to attach the IMS instrument onto the mass spectrometer. Additionally, the mass spectrometer was modified to increase the electric field strength and decrease the pressure in the differentially pumped interface, causing a decrease in the effect of collisional focusing and permitting a mobility spectrum to be measured using the mass spectrometer. The utility of the COTS-ETD/API 2000 configuration for the characterization of the gas phase ion chemistry of COTS-ETD equipment was established by obtaining mass and tandem mass spectra in the continuous ion flow and selected mobility monitoring operating modes and by obtaining mass-selected ion mobility spectra for the explosive standard 2,4,6 trinitrotoluene (TNT). This analysis confirmed that the product ion for TNT is [TNT - H](-), the predominant collision-induced dissociation pathway for [TNT- H](-) is the loss of NO and NO(2), and the reduced mobility value for [TNT - H](-) is 1.54 cm(2)V(-1) s(-1). Moreover, this analysis was attained for sample amounts of 1 ng and with a resolving power of 37. The objective of the research is to advance the operational effectiveness of COTS IMS based ETD equipment by developing a platform that can facilitate the understanding of the ion chemistry intrinsic to the equipment.

Mars Surveyor Program '01 Mars Environmental Compatibility Assessment wet chemistry lab: a sensor array for chemical analysis of the Martian soil.

The Mars Environmental Compatibility Assessment (MECA) instrument was designed, built, and flight qualified for the now canceled MSP (Mars Surveyor Program) '01 Lander. The MECA package consisted of a microscope, electrometer, material patch plates, and a wet chemistry laboratory (WCL). The primary goal of MECA was to analyze the Martian soil (regolith) for possible hazards to future astronauts and to provide a better understanding of Martian regolith geochemistry. The purpose of the WCL was to analyze for a range of soluble ionic chemical species and electrochemical parameters. The heart of the WCL was a sensor array of electrochemically based ion-selective electrodes (ISE). After 20 months storage at -23 degrees C and subsequent extended freeze/thawing cycles, WCL sensors were evaluated to determine both their physical durability and analytical responses. A fractional factorial calibration of the sensors was used to obtain slope, intercept, and all necessary selectivity coefficients simultaneously for selected ISEs. This calibration was used to model five cation and three anion sensors. These data were subsequently used to determine concentrations of several ions in two soil leachate simulants (based on terrestrial seawater and hypothesized Mars brine) and four actual soil samples. The WCL results were compared to simulant and soil samples using ion chromatography and inductively coupled plasma optical emission spectroscopy. The results showed that flight qualification and prolonged low-temperature storage conditions had minimal effects on the sensors. In addition, the analytical optimization method provided quantitative and qualitative data that could be used to accurately identify the chemical composition of the simulants and soils. The WCL has the ability to provide data that can be used to "read" the chemical, geological, and climatic history of Mars, as well as the potential habitability of its regolith.