Chemical Compounds Released from Specific Osteoinductive Bioactive Materials Stimulate Human Bone Marrow Mesenchymal Stem Cell Migration.

In this work, a poly(L-lactide-co-glycolide) (PLGA)-based composite was enriched with one of the following sol-gel bioactive glasses (SBG) at 50 wt.%: A1-40 mol% SiO2, 60 mol% CaO, CaO/SiO2 ratio of 1.50; S1-80 mol% SiO2, 20 mol% CaO, CaO/SiO2 ratio of 0.25; A2-40 mol% SiO2, 54 mol% CaO, 6 mol% P2O5, CaO/SiO2 ratio of 1.35; S2-80 mol% SiO2,16 mol% CaO, 4 mol% P2O5, CaO/SiO2 ratio of 0.20. The composites and PLGA control sheets were then soaked for 24 h in culture media, and the obtained condition media (CM) were used to treat human bone marrow stromal cells (hBMSCs) for 72 h. All CMs from the composites increased ERK 1/2 activity vs. the control PLGA CM. However, expressions of cell migration-related c-Fos, osteopontin, matrix metalloproteinase-2, C-X-C chemokine receptor type 4, vascular endothelial growth factor, and bone morphogenetic protein 2 were significantly increased only in cells treated with the CM from the A1/PLGA composite. This CM also significantly increased the rate of human BMSC migration but did not affect cell metabolic activity. These results indicate important biological markers that are upregulated by products released from the bioactive composites of a specific chemical composition, which may eventually prompt osteoprogenitor cells to colonize the bioactive material and accelerate the process of tissue regeneration.

Molecular Indicators of Biomaterials Osteoinductivity - Cell Migration, BMP Production and Signalling Turns a Key.

In this work we dissected the osteoinductive properties of selected, PLGA-based scaffolds enriched with gel-derived bioactive glasses (SBGs) of either binary SiO2-CaO or ternary SiO2-CaO-P2O5 system, differing in CaO/SiO2 ratio (i.e. high -or low-calcium SBGs). To assess the inherent ability of the scaffolds to induce osteogenesis of human bone marrow stromal cells (BMSC), the study was designed to avoid any osteogenic stimuli beyond the putative osteogenic SBG component of the studied scaffolds. The bioactivity and porosity of scaffolds were confirmed by SBF test and porosimetry. Condition media (CM) from BMSC-loaded scaffolds exhibited increased Ca and decreased P content corresponding to SBGs CaO/SiO2 ratio, whereas Si content was relatively stable and overall lower in CM from scaffolds containing binary SBGs. CM from cell-loaded scaffolds containing high-calcium, binary SBGs promoted migration of BMSC and BMP-response in reporter osteoblast cell line. BMSC culture on these scaffolds or the ones containing ternary, low-calcium SBGs resulted in the activation of BMP-related signaling and expression of several osteogenic markers. Ectopic bone formation was induced by scaffolds containing binary SBGs, but high-calcium ones produced significantly more osteoid. Scaffolds containing ternary SBGs negatively influenced the expression of osteogenic transcription factors and Cx43, involved in cell-cell interactions. High-calcium scaffolds stimulated overall higher Cx43 expression. We believe the initial cell-cell communication may be crucial to induce and maintain osteogenesis and high BMP signaling on the studied scaffolds. The presented scaffolds' biological properties may also constitute new helpful markers to predict osteoinductive potential of other bioactive implant materials.

Microstructure and In Vitro Evaluation of Extruded and Hot Drawn Alloy MgCa0.7 for Biodegradable Surgical Wires.

The MgCa0.7 alloy may be a promising material for biodegradable surgical wires. In this paper, the technology for producing surgical wires from this alloy has been developed, based both on finite element modelling and experimental study. In particular, the extrusion and hot-drawing effects on the mechanical properties, microstructures, in-vitro rates of biocorrosion, and cytotoxicity to human cancer cells (SaOS-2) and healthy (hPDL) ones, have been determined. An approximately 30-40% increase in corrosion rate due to increasing hot-drawing temperature was observed. An effect of hot-drawing temperature on cytotoxicity was also found. Notably, at various stages of the final wires' production, the MgCa0.7 alloy became toxic to cancer cells. This cytotoxicity depended on the alloys' processing parameters and was maximal for the as-extruded rod and for the wires immediately after hot drawing at 440 °C. Thus, the careful selection of processing parameters makes it possible to obtain a product that is not only a promising candidate for biodegradable surgical wires, but one which also has intrinsic bioactive properties that produce antitumor activity.

Characterization of Collagen/Beta Glucan Hydrogels Crosslinked with Tannic Acid.

Hydrogels based on collagen/ß-glucan crosslinked with tannic acid were obtained by neutralization using dialysis. The presence of tannic acid allowed obtaining stable hydrogel materials with better mechanical properties. Tannic acid was released from matrices gradually and not rapidly. The antioxidant properties of the obtained hydrogels increased over the course of their incubation in culture media and were dependent on the concentration of tannic acid in the matrices. The obtained materials influenced dehydrogenase activity and the ATP level of pathogens. Additionally, the materials' extracts improved the HaCaT cells' viability. Therefore, the obtained hydrogels seem to be promising biocompatible materials which display antimicrobial properties.

The Preparation and Characterization of Chitosan-Based Hydrogels Cross-Linked by Glyoxal.

In this study, hydrogels based on chitosan cross-linked by glyoxal have been investigated for potential medical applications. Hydrogels were loaded with tannic acid at different concentrations. The thermal stability and the polyphenol-releasing rate were determined. For a preliminary assessment of the clinical usefulness of the hydrogels, they were examined for blood compatibility and in the culture of human dental pulp cells (hDPC). The results showed that after immersion in a polyphenol solution, chitosan/glyoxal hydrogels remain nonhemolytic for erythrocytes, and we also did not observe the cytotoxic effect of hydrogels immersed in tannic acid (TA) solutions with different concentration. Tannic acid was successfully released from hydrogels, and its addition improved material thermal stability. Thus, the current findings open the possibility to consider such hydrogels in clinics.

Preparation and Characterization of Fish Skin Collagen Material Modified with ß-Glucan as Potential Wound Dressing.

Collagen possesses unique properties, e.g., biocompatibility, biodegradability, and non-toxicity. However, collagen material degrades too quickly and has low mechanical properties. One of the methods of polymers' modification is mixing them to obtain blends. In this study, the influence of ß-glucan for collagen material was analyzed. The interaction between the functional groups of the polymer was analyzed by ATR-FTIR (attenuated total reflection-fourier transform infrared) spectroscopy. The influence of ß-glucan on mechanical properties was evaluated. The surface properties of materials were assessed using contact angle measurements and the topography of materials was evaluated by AFM (atomic force microscope). The structure of materials was analyzed according to SEM (scanning electron microscopy) pictures. Moreover, the DPPH-free radicals' scavenging ability and biocompatibility against erythrocytes and HaCaT cells were evaluated. Collagen and ß-glucan were bound together by a hydrogen bond. ß-glucan addition increased the roughness of the surface of the film and resulted in a more rigid character of the materials. A small addition of ß-glucan to collagen provided a more hydrophilic character. All the materials could swell in in vitro conditions and showed antioxidant activity. Materials do not cause erythrocyte hemolysis. Finely, our cytotoxicity studies indicated that ß-glucan can be safely added at small (10% or less) quantity to collagen matrix, they sufficiently support cell growth, and the degradation products of such matrices may actually provide some beneficial effects to the surrounding cells/tissues.

In vitro cytotoxicity of biodegradable Zn-Mg surgical wires in tumor and healthy cells.

In this work, we examined the in vitro cytotoxicity of new biodegradable surgical wires. The wires made of zinc with the addition of a small amount of magnesium (pure zinc, ZnMg 0.0026, ZnMg 0.0068, and ZnMg 0.08) have been investigated. The wires were produced using a technology based on extrusion and subsequent drawing. The resulting wires with a diameter of 0.8-1.0 mm are designed to be used in surgical operations related to bone joints. For cytotoxicity studies, we have selected human dental pulp stem cells (hDPSC) as the cell population representing normal osteoprogenitor cells. Considering that, after bone surgeries, the chance of osteosarcoma increases, we have compared the results obtained in hDPSC to those obtained with Saos-2 human osteosarcoma cell line. Cultured cells were exposed to the extracts obtained from the materials incubated in culture medium for 24 h with and without preincubation. Extracts of different ratios were examined. The results showed that the extracts obtained from wires made of ZnMg 0.0026 alloy exhibit high toxicity to Saos-2 osteosarcoma cells and low toxicity to hDPSC cells. This was in contrast to all reference materials, i.e., commercial surgical sutures made of steel and polymers, that did not display cytotoxicity toward osteosarcoma cells. Thus, the detected phenomenon for the ZnMg 0.0026 alloy can become the basis for creating biodegradable Zn-Mg surgical wires with antitumor activity.

The role of CaO/SiO2 ratio and P2O5 content in gel-derived bioactive glass-polymer composites in the modulation of their bioactivity and osteoinductivity in human BMSCs.

We obtained a range of PLGA-based composites containing sol-gel bioactive glasses (SBG) from the SiO2-CaO and SiO2-CaO-P2O5 systems. Eight SBGs with different CaO/SiO2 ratios with and without P2O5 were incorporated at 50% w/w to PLGA matrix and structured into thin films suitable for cell culture. The SBG/PLGA composites were examined for their bioactivity in simulated body fluid (SBF), ion release profile in culture media with and without cells, and osteoinductivity in standard human bone marrow stromal cell (hBMSC) cultures without osteogenic growth factors. Our results indicate different surface activity of composites depending on the presence/absence of P2O5 in SBG composition. Furthermore, ion release profile to culture medium differed depending on the presence/absence of cells. Direct culture of hBMSC on the SiO2-CaO/PLGA composite films resulted in elevated Runx-2 mRNA, opposite to low Runx-2 mRNA levels on SiO2-CaO-P2O5/PLGA films. All studied composites increased Osx mRNA levels. Whereas some of SiO2-CaO/PLGA composites did not elevate BMP-2 and -6 proteins in hBMSC cultures, high levels of these BMPs were present in all cultures on SiO2-CaO-P2O5/PLGA composites. All composites induced BMP-related Tak1 signalling, whereas Smad1 signalling was restricted mostly to composites containing three-component SBGs. ALP activity of hBMSC and BMP-related luciferase activity of mouse BRITE cells differed depending on whether the cells were stimulated with culture medium conditioned with SBG/PLGA composites or the cells were directly cultured on the composite surfaces. Altogether, beyond bioactivity and osteoinductivity of SBG/PLGA composites, our studies show key differences in the biological response to both the bioactive material dissolution products and upon direct cell-material contacts.

Properties of scaffolds based on chitosan and collagen with bioglass 45S5.

Scaffolds based on chitosan (CTS), collagen (Coll) and glycosaminoglycans (GAG) mixtures cross-linked by tannic acid (TA) with bioglass 45S5 addition were obtained with the use of the freeze-drying method. The prepared scaffolds were characterised for morphology, mechanical strength and degradation rate. Moreover, cell viability on the obtained scaffolds was measured with and without the presence of ascorbic acid and dexamethasone. The main purpose of the research was to compare the effectiveness of bioglass 45S5 influence on the physicochemical and biological properties of scaffolds. The results demonstrated that the scaffolds based on the blends of biopolymers cross-linked by TA are stable in an aqueous environment. Scanning electron microscope images allowed the observation of a porous scaffold structure with interconnected pores. The addition of bioglass nanoparticles improved the mechanical properties and decreased the degradation rate of composite materials. The biological properties were improved for 20% tannic acid addition compared to 5%. However, the addition of bioglass 45S5 did not change to cells response significantly.

Potential for chromium (VI) bioremediation by the aquatic carnivorous plant Utricularia gibba L. (Lentibulariaceae).

The aquatic carnivorous plant Utricularia gibba has one of the smallest known genomes among flowering plants, and therefore, it is an excellent model organism for physiological and developmental studies. The main aim of our work was to check whether the ubiquitous U. gibba might be useful for the phytoremediation of the highly toxic and mobile hexavalent chromium in waters. Plants were incubated for 1 week in a 50 µM (2.6 mg dm(-3)) Cr(VI) solution in laboratory conditions. Our results revealed that the plant exhibits a very high accumulation capacity for Cr. The accumulation level was higher than 780 mg kg(-1) and a bioconcentration factor >300. On the other hand, the plants showed a low tolerance to the elevated Cr concentration, which was expressed in a significant decrease of the photosystem II activity. However, the most pronounced negative influence of chromate was found on the morphology and activity of the traps. Due to its high accumulation capacity, we suggest that U. gibba may be efficient in the removal of chromate over a short time scale. It can also provide a new molecular resource for studying the mechanisms of Cr(VI) detoxification.