Incidence, remission, and persistence of Raynaud's phenomenon in the general population of northern Sweden: a prospective study.

BACKGROUND: Raynaud's phenomenon is common condition, but little is known about the natural course. The primary aim of this study was to determine the incidence, remission, and persistence proportions of Raynaud's phenomenon in the general population of northern Sweden. Secondary aims were to determine how individual and exposure factors affect the course of Raynaud's phenomenon, and to assess gender differences. METHODS: A prospective, survey-based, closed-cohort study was conducted on a sample of men and women between 18-70 years of age, living in northern Sweden. Data on Raynaud's phenomenon characteristics and general health status were collected during the winters of 2015 (baseline) and 2021 (follow-up). Rates of incidence, remission, and persistence were calculated. Binary logistic regression was used to determine the association between baseline variables and the course of Raynaud's phenomenon. RESULTS: The study population consisted of 2703 women (53.9%) and 2314 men. There were 390 women (14.5%) and 290 men (12.7%) reporting Raynaud's phenomenon in the follow-up survey. The annual incidence proportion was 0.7% among women and 0.9% among men (gender difference p = 0.04). The annual remission proportion was 4.4% and 5.5%, respectively (p = 0.05). Having sustained a cold injury affecting the hands since baseline was significantly associated with incident Raynaud's phenomenon (OR 3.92; 95% CI 2.60-5.90), after adjusting for age and gender. CONCLUSIONS: In the general population of northern Sweden, Raynaud's phenomenon is a common but variable condition, where symptoms may remit over time. Men had a higher incidence proportion than women. The results support a possible causal pathway where cold injury can precede the onset of Raynaud's phenomenon.

Manifestations of cold sensitivity - a case series.

Objectives: To characterise cold sensitivity using a semi-structured interview, physical examination, thermal quantitative sensory testing (QST), and laser speckle contrast analysis (LASCA). Methods: Eight women and four men, ages 22-74, with cold sensitivity were interviewed and examined by an occupational physician. Thermal perception thresholds were established using QST, on the pulp of the index and little finger of the most affected hand. Skin perfusion in the dorsum of the hand was measured using LASCA, at baseline, after two-minute 12°C water immersion, and during rewarming. Results: The physical examination yielded few findings indicative of vascular or neurosensory pathology. One subject (8%) had impaired thermal perception thresholds. LASCA at baseline showed absent proximal-distal perfusion gradients in six subjects (50%), and a dyshomogeneous perfusion pattern in five (42%). Perfusion on a group level was virtually unchanged by cold stress testing (median 52.5 PU; IQR 9.0 before versus 51.3 PU; IQR 27.2 afterwards). Conclusions: Physical examination and thermal QST offered little aid in diagnosing cold sensitivity, which challenges the neurosensory pathophysiological hypothesis. LASCA indicated disturbances in microvascular regulation and could prove a useful tool in future studies on cold sensitivity.

Does the Femoral Head Size in Hip Arthroplasty Influence Lower Body Movements during Squats, Gait and Stair Walking? A Clinical Pilot Study Based on Wearable Motion Sensors.

A hip prosthesis design with larger femoral head size may improve functional outcomes compared to the conventional total hip arthroplasty (THA) design. Our aim was to compare the range of motion (RoM) in lower body joints during squats, gait and stair walking using a wearable movement analysis system based on inertial measurement units (IMUs) in three age-matched male groups: 6 males with a conventional THA (THAC), 9 with a large femoral head (LFH) design, and 8 hip- and knee-asymptomatic controls (CTRL). We hypothesized that the LFH design would allow a greater hip RoM, providing movement patterns more like CTRL, and a larger side difference in hip RoM in THAC when compared to LFH and controls. IMUs were attached to the pelvis, thighs and shanks during five trials of squats, gait, and stair ascending/descending performed at self-selected speed. THAC and LFH participants completed the Hip dysfunction and Osteoarthritis Outcome Score (HOOS). The results showed a larger hip RoM during squats in LFH compared to THAC. Side differences in LFH and THAC groups (operated vs. non-operated side) indicated that movement function was not fully recovered in either group, further corroborated by non-maximal mean HOOS scores (LFH: 83 ± 13, THAC: 84 ± 19 groups, vs. normal function 100). The IMU system may have the potential to enhance clinical movement evaluations as an adjunct to clinical scales.

Non-Ionizing Radiation in Swedish Health Care-Exposure and Safety Aspects.

The main aim of the study was to identify and describe methods using non-ionizing radiation (NIR) such as electromagnetic fields (EMF) and optical radiation in Swedish health care. By examining anticipated exposure levels and by identifying possible health hazards we also aimed to recognize knowledge gaps in the field. NIR is mainly used in health care for diagnosis and therapy. Three applications were identified where acute effects cannot be ruled out: magnetic resonance imaging (MRI), transcranial magnetic stimulation (TMS) and electrosurgery. When using optical radiation, such as class 3 and 4 lasers for therapy or surgical procedures and ultra-violet light for therapy, acute effects such as unintentional burns, photo reactions, erythema and effects on the eyes need to be avoided. There is a need for more knowledge regarding long-term effects of MRI as well as on the combination of different NIR exposures. Based on literature and after consulting staff we conclude that the health care professionals' knowledge about the risks and safety measures should be improved and that there is a need for clear, evidence-based information from reliable sources, and it should be obvious to the user which source to address.

Vibrotactile and thermal perception and its relation to finger skin thickness.

OBJECTIVE: Quantitative measurements of vibrotactile and thermotactile perception thresholds (VPT and TPT, respectively) rely on responses from sensory receptors in the skin when mechanical or thermal stimuli are applied to the skin. The objective was to examine if there is a relation between skin thickness (epidermis and dermis) and VPT or TPT. METHODS: Perception thresholds were measured on the volar side of the fingertip on 148 male subjects, out of which 116 were manual workers exposed to hand-transmitted vibration and 32 were white-collar (office) workers. Skin thickness was measured using a high-frequency ultrasonic derma scanner system. RESULTS: The difference in age, perception thresholds and skin thickness between manual and office workers was small and non-significant except for the perception of cold, which was decreased by vibration exposure. Skin thickness for both subgroups was mean 0.57 mm (range 0.25-0.93 mm). Increased age was associated with decreased perception of warmth and vibration. Lifetime cumulative exposure to vibration, but not age, was associated with decreased perception of cold. CONCLUSION: No association (p > .05) was found between finger skin thickness in the range of about 0.1-1 mm and vibration perception threshold for test frequencies from 8 to 500 Hz and thermotactile perception thresholds for warmth and cold. Increasing age was associated with reduced perception of vibration and warmth. Vibration exposure was associated with decreased perception of cold. SIGNIFICANCE: Skin thickness is a factor that may affect the response from sensory receptors, e.g., due to mechanical attenuation and thermal insulation. Thus, to evaluate perception threshold measurements, it is necessary to know if elevated thresholds can be attributed to skin thickness. No previous studies have measured skin thickness as related to vibrotactile and thermotactile perception thresholds. This study showed no association between skin thickness and vibrotactile perception or thermotactile perception.

Long-term effect of hand-arm vibration on thermotactile perception thresholds.

BACKGROUND: Occupational exposure to hand-transmitted vibration (HTV) is known to cause neurological symptoms such as numbness, reduced manual dexterity, grip strength and sensory perception. The purpose of this longitudinal study was to compare thermotactile perception thresholds for cold (TPTC) and warmth (TPTW) among vibration exposed manual workers and unexposed white collar workers during a follow-up period of 16 years to elucidate if long-term vibration exposure is related to a change in TPT over time. METHODS: The study group consisted of male workers at a production workshop at which some of them were exposed to HTV. They were investigated in 1992 and followed-up in 2008. All participants were physically examined and performed TPT bilaterally at the middle and distal phalanges of the second finger. Two different vibration exposure dosages were calculated for each individual, i.e. the individual cumulative lifetime dose (mh/s2) or a lifetime 8-h equivalent daily exposure (m/s2). RESULTS: A significant mean threshold difference was found for all subjects of about 4-5 °C and 1-2 °C in TPTW and TPTC, respectively, between follow-up and baseline. No significant mean difference in TPTC between vibration exposed and non-exposed workers at each occasion could be stated to exist. For TPTW a small but significant difference was found for the right index finger only. Age was strongly related to thermotactile perception threshold. The 8-h equivalent exposure level (A (8)) dropped from about 1.3 m/s2 in 1992 to about 0.7 m/s2 in 2008. CONCLUSIONS: A lifetime 8-h equivalent daily exposure to hand-transmitted vibration less than 1.3 m/s2 does not have a significant effect on thermotactile perception. Age, however, has a significant impact on the change of temperature perception thresholds why this covariate has to be considered when using TPT as a tool for health screening.

Double-Sided Mechanical Shocks Provoke Larger Seated Postural Reactions Compared With Single-Sided Mechanical Shocks.

STUDY DESIGN: Human volunteers were exposed experimentally to single-sided mechanical shocks (SSMS) and double-sided mechanical shocks (DSMS) while seated. OBJECTIVE: The aim of this study was to describe and contrast seated postural reactions due to SSMS or DSMS in healthy male adults. SUMMARY OF BACKGROUND DATA: Mechanical shocks to the body, caused when driving on irregular terrain, are suggested to be hazardous to the spine and may be associated with the reported musculoskeletal pain of the back and neck among professional drivers. However, very little is known about the characteristics of seated postural reactions and the biomechanical effects caused by mechanical shocks. METHODS: Twenty healthy male subjects (18-43 years old) were exposed while seated to 5 SSMS and 15 DSMS in lateral directions. The second acceleration in the DSMS was in the opposite direction to the first acceleration and was fast, medium, or slow depending on the speed of direction change. Surface electromyography (EMG) was recorded in muscles of the upper neck, trapezius, erector spinae, and external oblique, while kinematics were recorded with inertial sensors placed at the neck, trunk, and pelvis. Muscle activity was normalized to maximum voluntary contractions (MVCs). RESULTS: The EMG amplitudes were significantly higher (0.6-1%; P < 0.001) for the fast DSMS than all other shocks. Range of motion (ROM) of the neck and trunk was greater during the DSMS than the SSMS. Evoked muscle activity was less than 2% MVC in the trapezius, less than 10% MVC in the erector spinae and upper neck, while the activity exceeded 10% MVC in the external oblique muscles. CONCLUSION: Fast DSMS in lateral directions appear more demanding than SSMS, demonstrating augmented seated postural reactions. However, the present mechanical shocks employed did not seem to induce postural reactions with regard to ROM or muscle activity of a magnitude likely to cause musculoskeletal overload. LEVEL OF EVIDENCE: 4.

Neurovascular hand symptoms in relation to cold exposure in northern Sweden: a population-based study.

PURPOSE: To describe the self-reported ambient cold exposure in northern Sweden and to relate the level of cumulative cold exposure to the occurrence of sensory and vascular hand symptoms. We hypothesize that cold exposure is positively related to reporting such symptoms. METHODS: A questionnaire about cold exposure and related symptoms was sent out to 35,144 subjects aged 18-70 years and living in northern Sweden. RESULTS: A total of 12,627 out of 35,144 subjects returned the questionnaire (response rate 35.9%). Subjects living in the rural alpine areas reported more extensive cold exposure both during work and leisure time compared to the urbanized coastal regions. Frostbite in the hands was present in 11.4% of men and 7.1% of women, cold sensitivity was present in 9.7 and 14.4%, and Raynaud's phenomenon was present in 11.0% of men and 14.0% of women. There was a positive association between cumulative cold exposure and neurovascular hand symptoms. CONCLUSION: The present study demonstrates that the cold environment in northern Sweden might be an underestimated health risk. Our hypothesis that cold exposure is positively related to reporting of neurovascular hand symptoms was supported by our findings. In addition, such symptoms were common not only in conjunction with an overt cold injury. Our results warrant further study on pathophysiological mechanisms and suggest the need for confirmatory prevalence studies to support national public health planning.

Is better preservation of eccentric strength after stroke due to altered prefrontal function?

Ventrolateral prefrontal cortex (VLPFC) is part of a network that exerts inhibitory control over the motor cortex (MC). Recently, we demonstrated that VLPFC was more activated during imagined maximum eccentric than during imagined concentric contractions in healthy participants. This was accompanied with lower activation levels within motor regions during imagined eccentric contractions. The aim was to test a novel hypothesis of an involvement of VLPFC in contraction mode-specific modulation of force. Functional magnetic resonance imaging was used to examine differences in VLPFC and motor regions during the concentric and the eccentric phases of imagined maximum contractions in a selected sample of subjects with stroke (n = 4). The subjects were included as they exhibited disturbed modulation of force. The previously demonstrated pattern within VLPFC was evident only on the contralesional hemisphere. On the ipsilesional hemisphere, the recruitment in VLPFC was similar for both modes of contractions. The findings support a hypothesis of the involvement of VLPFC in contraction mode-specific modulation of maximum force production. A disturbance of this system might underlie the lack of contraction mode-specific modulation commonly found among stroke subjects, often expressed as an increased ratio between eccentric and concentric strength.

Quantitatively measured tremor in hand-arm vibration-exposed workers.

OBJECTIVES: The aim of the present study was to investigate the possible increase in hand tremor in relation to hand-arm vibration (HAV) exposure in a cohort of exposed and unexposed workers. METHODS: Participants were 178 male workers with or without exposure to HAV. The study is cross-sectional regarding the outcome of tremor and has a longitudinal design with respect to exposure. The dose of HAV exposure was collected via questionnaires and measurements at several follow-ups. The CATSYS Tremor Pen(®) was used for measuring postural tremor. Multiple linear regression methods were used to analyze associations between different tremor variables and HAV exposure, along with predictor variables with biological relevance. RESULTS: There were no statistically significant associations between the different tremor variables and cumulative HAV or current exposure. Age was a statistically significant predictor of variation in tremor outcomes for three of the four tremor variables, whereas nicotine use was a statistically significant predictor of either left or right hand or both hands for all four tremor variables. CONCLUSIONS: In the present study, there was no evidence of an exposure-response association between HAV exposure and measured postural tremor. Increase in age and nicotine use appeared to be the strongest predictors of tremor.

Risk of hearing loss among workers with vibration-induced white fingers.

BACKGROUND: We examined the risk of hearing loss for workers who use hand-held vibrating tools with vibration-induced white fingers (VWF) compared to workers without VWF. METHODS: Data on 184 participants from a 21-year cohort were gathered with questionnaires and measurements. The effects on hearing status of VWF, hand-arm vibration exposure, smoking habits, age and two-way interactions of these independent variables were examined with binary logistic regression. Analyses were made for the right hand and ear as well as for the hand with VWF and the ear with worse categorized hearing status. RESULTS: Workers with VWF in their right hand had an increased risk of hearing loss (odds ratio 2.2-2.3) in the right ear. Workers with VWF in any hand did not have any increased risk of hearing loss in the ear with worse hearing status. CONCLUSIONS: This study supports the hypothesis that VWF increases the risk of hearing loss among workers who use hand-held vibrating tools in a noisy environment.

A prospective cohort study investigating an exposure-response relationship among vibration-exposed male workers with numbness of the hands.

OBJECTIVE: The aim of this study was to investigate the exposure-response relationship of hand-arm vibration exposure to neurological symptoms (numbness) of the hand in a cohort of vibration-exposed workers. METHODS: The baseline cohort comprised 241 office and manual workers with and without exposure to hand-arm vibration. Numbness (the symptom or event) in the hand was assessed for all subjects at baseline and follow-ups after 5, 10, and 16 years. The workers were stratified into quartiles with no exposure in the first quartile and increasing intensity of exposure in quartiles 2-4 (groups 1-3). Data analysis was performed using survival analysis (time to event). Information on cumulative exposure and years of exposure to event was collected via questionnaires. Measurements were performed in accordance with the International Organization for Standardization (ISO) 5349-1. RESULTS: The hazard ratio (HR) of risk of event (numbness) differed statistically significantly between the non-exposed group (group 0) and the two higher exposure groups (groups 2 and 3). There was also a significant ratio difference between the lowest exposure group (group 1) and the two higher groups. The ratio for group 1 was 1.77 [95% confidence interval (95% CI) 0.96-3.26] compared with 3.78 (95% CI 2.15-6.62) and 5.31 (95% CI 3.06-9.20) for groups 2 and 3, respectively. CONCLUSION: The results suggest a dose-response relationship between vibration exposure and numbness of the hands. This underlines the importance of keeping vibration levels low to prevent neurological injury to the hands.

Determinants explaining the variability of hand-transmitted vibration emissions from two different work tasks: grinding and cutting using angle grinders.

BACKGROUND: There are numerous factors including physical, biomechanical, and individual that influence exposure to hand-transmitted vibration (HTV) and cause variability in the exposure measurements. Knowledge of exposure variability and determinants of exposure could be used to improve working conditions. We performed a quasi-experimental study, where operators performed routine work tasks in order to obtain estimates of the variance components and to evaluate the effect of determinants, such as machine-wheel combinations and individual operator characteristics. METHODS: Two pre-defined simulated work tasks were performed by 11 operators: removal of a weld puddle of mild steel and cutting of a square steel pipe. In both tasks, four angle grinders were used, two running on compressed air and two electrically driven. Two brands of both grinding and cutting wheels were used. Each operator performed both tasks twice in a random order with each grinder and wheel and the time to complete each task was recorded. Vibration emission values were collected and the wheel wear was measured as loss of weight. Operators' characteristics collected were as follows: age, body height and weight, length and volume of their hands, maximum hand grip force, and length of work experience with grinding machines (years). The tasks were also performed by one operator who used four machines of the same brand. Mixed and random effects models were used in the statistical evaluation. RESULTS: The statistical evaluation was performed for grinding and cutting separately and we used a measure referring to the sum of the 1-s r.m.s. average frequency-weighted acceleration over time for completing the work task (a(sa)). Within each work task, there was a significant effect as a result of the determinants 'the machine used', 'wheel wear', and 'time taken to complete the task'. For cutting, 'the brand of wheel' used also had a significant effect. More than 90% of the inherent variability in the data was explained by the determinants. The two electrically powered machines had a mean a(sa) that was 2.6 times higher than the two air-driven machines. For cutting, the effect of the brand of wheel on a(sa) was ~0.1 times. The a(sa) increased both with increasing wheel wear and with time taken to complete the work task. However, there were also a number of interaction effects which, to a minor extent, modified the a(sa). Only a minor part (1%) of the total variability was attributed to the operator: for cutting, the volume of the hands, maximum grip force, and body weight were significant, while for grinding, it was the maximum grip force. There was no clear difference in a(sa) between the four copies of the same brand of each machine. CONCLUSIONS: By including determinants that were attributed to the brand of both machine and wheel used as well as the time taken to complete the work task, we were able to explain >90% of the variability. The dominating determinant was the brand of the machine. Little variability was found between operators, indicating that the overall effect as due to the operator was small.

Quantitative neurosensory findings, symptoms and signs in young vibration exposed workers.

BACKGROUND: Long-term exposure to hand-held vibrating tools may cause the hand arm vibration syndrome (HAVS) including vibration induced white fingers and sensorineural symptoms. The aim was to study early neurosensory effects by quantitative vibrotactile and monofilament tests in young workers with hand-held vibration exposure. METHODS: This cross-sectional study consisted of 142 young, male machine shop and construction workers with hand-held exposure to vibrating tools. They were compared with 41 non-vibration exposed subjects of the same age-group. All participants passed a structured interview, answered several questionnaires and had a physical examination including the determination of vibrotactile perception thresholds (VPTs) at two frequencies (31.5 and 125 Hz) and Semmes Weinstein's Monofilament test. RESULTS: In the vibration exposed group 8% of the workers reported episodes of tingling sensations and 10% numbness in their fingers. Approximately 5-10% of the exposed population displayed abnormal results on monofilament tests. The vibrotactile testing showed significantly increased VPTs for 125 Hz in dig II bilaterally (right hand, p = 0.01; left hand, p = 0.024) in the vibration exposed group.A multiple regression analysis (VPT - dependent variable; age, height, examiner and five different vibration dose calculations - predictor variables) in dig II bilaterally showed rather low R2-values. None of the explanatory variables including five separately calculated vibration doses were included in the models, neither for the total vibration exposed group, nor for the highest exposed quartile.A logistic multiple regression analysis (result of monofilament testing - dependent variable; age, height, examiner and five vibration dose calculations - predictor variables) of the results of monofilament testing in dig II bilaterally gave a similar outcome. None of the independent variables including five calculated vibration doses were included in the models neither for the total exposed group nor for the highest exposed quartile. CONCLUSION: In spite of the fairly short vibration exposure, a tendency to raised VPTs as well as pathologic monofilament test results was observed. Thus, early neurophysiologic symptoms and signs of vibration exposure may appear after short-term exposure also in young workers.

Noise and hand-arm vibration exposure in relation to the risk of hearing loss.

The aim of this study was to examine the possible association of combined exposure of noise and hand-arm vibration (HAV) and the risk of noise-induced hearing loss. Workers in a heavy engineering industry were part of a dynamic cohort. Of these workers, 189 had HAV exposure, and their age and hearing status were recorded in the same year and were, therefore, included in the analysis. Data on HAV duration and acceleration was gathered through questionnaires, observations, and measurements. All available audiograms were categorized into normal and hearing loss. The first exposure variable included the lifetime HAV exposure. The lifetime HAV exposure was multiplied by the acceleration of HAV for the second and third exposure variable. Logistic regression using the Generalized Estimation Equations method was chosen to analyze the data to account for the repeated measurements. The analysis was performed with both continuous exposure variables and with exposure variables grouped into exposure quartiles with hearing loss as an outcome and age as a covariate. With continuous exposure variables, the odds ratio (OR) with a 95% confidence interval (CI) for hearing loss was equal to or greater than one for all exposure variables. When the exposure variables were grouped into quartiles, the OR with a 95% CI was greater than one at the third and fourth quartile. The results show that working with vibrating machines in an environment with noise exposure increases the risk of hearing loss, supporting an association between exposure to noise and HAV, and the noise-induced hearing loss.

Sound and vibration: effects on infants' heart rate and heart rate variability during neonatal transport.

AIM: To measure the effect of sound and whole-body vibration on infants' heart rate and heart rate variability during ground and air ambulance transport. METHODS: Sixteen infants were transported by air ambulance with ground ambulance transport to and from the airports. Whole-body vibration and sound levels were recorded and heart parameters were obtained by ECG signal. RESULTS: Sound and whole-body vibration levels exceeded the recommended limits. Mean whole-body vibration and sound levels were 0.19 m/s(2) and 73 dBA, respectively. Higher whole-body vibration was associated with a lower heart rate (p < 0.05), and higher sound level was linked to a higher heart rate (p = 0.05). The heart rate variability was significantly higher at the end of the transport than at the beginning (p < 0.01). Poorer physiological status was associated with lower heart rate variability (p < 0.001) and a lower heart rate (p < 0.01). Infants wearing earmuffs had a lower heart rate (p < 0.05). CONCLUSIONS: Sound and whole-body vibration during neonatal transport exceed recommended levels for adults, and sound seem to have a more stressful effect on the infant than vibrations. Infants should wear earmuffs during neonatal transport because of the stress-reducing effect.

Nerve conduction in relation to vibration exposure - a non-positive cohort study.

BACKGROUND: Peripheral neuropathy is one of the principal clinical disorders in workers with hand-arm vibration syndrome. Electrophysiological studies aimed at defining the nature of the injury have provided conflicting results. One reason for this lack of consistency might be the sparsity of published longitudinal etiological studies with both good assessment of exposure and a well-defined measure of disease. Against this background we measured conduction velocities in the hand after having assessed vibration exposure over 21 years in a cohort of manual workers. METHODS: The study group consisted of 155 male office and manual workers at an engineering plant that manufactured pulp and paper machinery. The study has a longitudinal design regarding exposure assessment and a cross-sectional design regarding the outcome of nerve conduction. Hand-arm vibration dose was calculated as the product of self-reported occupational exposure, collected by questionnaire and interviews, and the measured or estimated hand-arm vibration exposure in 1987, 1992, 1997, 2002, and 2008. Distal motor latencies in median and ulnar nerves and sensory nerve conduction over the carpal tunnel and the finger-palm segments in the median nerve were measured in 2008. Before the nerve conduction measurement, the subjects were systemically warmed by a bicycle ergometer test. RESULTS: There were no differences in distal latencies between subjects exposed to hand-arm vibration and unexposed subjects, neither in the sensory conduction latencies of the median nerve, nor in the motor conduction latencies of the median and ulnar nerves. Seven subjects (9%) in the exposed group and three subjects (12%) in the unexposed group had both pathological sensory nerve conduction at the wrist and symptoms suggestive of carpal tunnel syndrome. CONCLUSION: Nerve conduction measurements of peripheral hand nerves revealed no exposure-response association between hand-arm vibration exposure and distal neuropathy of the large myelinated fibers in a cohort of male office and manual workers.

Vibrotactile perception and effects of short-term exposure to hand-arm vibration.

This study clarifies whether the established frequency weighting procedure for evaluating exposure to hand-transmitted vibration can effectively evaluate the temporary changes in vibrotactile perception thresholds due to pre-exposure to vibration. In addition, this study investigates the relationship between changes of the vibrotactile perception thresholds and the normalized energy-equivalent frequency-weighted acceleration. The fingers of 10 healthy subjects, five male and five female, were exposed to vibration under 16 conditions with a combination of different frequencies, intensities, and exposure times. The vibration frequencies were 31.5 and 125 Hz and exposure lasted between 2 and 16 min. According to International Organization for Standardization (ISO) 5349-1, the energy-equivalent frequency-weighted acceleration for the experimental time of 16 min is 2.5 or 5.0 m s(-2) root-mean-square, corresponding to a 8-h equivalent acceleration, A(8), of approximately 0.5 and 0.9 m s(-2), respectively. A measure of the vibrotactile perception thresholds was conducted before the different exposures to vibration. Immediately after the vibration exposure, the acute effect was measured continuously on the exposed index finger for the first 75 s, followed by 30 s of measures every minute for a maximum of 10 min. If the subject's thresholds had not recovered, the measures continued for a maximum of 30 min with measurements taken every 5 min. Pre-exposure to vibration significantly influenced vibrotactile thresholds. This study concludes that the influence on the thresholds depends on the frequency of the vibration stimuli. Increased equivalent frequency-weighted acceleration resulted in a significant change in threshold, but the thresholds were unaffected when changes in the vibration magnitude were expressed as the frequency-weighted acceleration or the unweighted acceleration. Moreover, the frequency of the pre-vibration exposure significantly influenced (up to 25 min after exposure) recovery time of the vibrotactile thresholds. This study shows that the frequency weighting procedure in ISO 5349-1 is unable to predict the produced acute changes in the vibrotactile perception. Moreover, the results imply that the calculation of the 'energy-equivalent' frequency-weighted acceleration does not reflect the acute changes of the vibration perception thresholds due to pre-exposure to vibration. Furthermore, when testing for the vibrotactile thresholds, exposure to vibration on the day of a test might influence the results. Until further knowledge is obtained, the previous practice of 3 h avoidance of vibration exposure before assessment is recommended.

Influence of vibration exposure on tactile and thermal perception thresholds.

AIMS: To establish if intermittent exposure to hand-transmitted vibration had the same effect as continuous exposure on the temporary response of finger tactile and thermal perception thresholds. METHODS: Two laboratory experiments were conducted. In each, 10 healthy subjects, five males and five females, participated. The subjects' fingers were exposed to vibration under four conditions with a combination of different periods of exposure and rest periods. The vibration frequency was 125 Hz and the frequency-weighted acceleration was 5 m/s(2). A measure of the tactile or thermal perception was conducted before the different exposures to vibration. Immediately after the vibration exposure, the acute effect was measured continuously for the first 75 s. This was followed by regular measures for a maximum of 30 min. RESULTS: The results showed that combinations of vibration with different periods of exposure and rest periods significantly influenced vibrotactile perception, but not thermal perception. CONCLUSIONS: These findings suggest that intermittent exposure to hand-transmitted vibration might be more beneficial for the response of the finger vibrotactile sensation than continuous exposure. This finding is inconsistent with the evaluation methods in ISO 5349-1 for vibrotactile sensation, but accurate for thermal perception.

Incidence of Raynaud's phenomenon in relation to hand-arm vibration exposure among male workers at an engineering plant a cohort study.

BACKGROUND: The objective of this study was to assess the incidence of Raynaud's phenomenon in relation to hand-arm vibration exposure in a cohort consisting of male office and manual workers. METHODS: The baseline population consisted of 94 office and 147 manual workers at an engineering plant. Raynaud's phenomenon (RP) was assessed at baseline and at follow up (at 5, 10 and 15 years). A retrospective and a prospective cohort analysis of data were done. Hand-arm vibration exposure dose was defined as the product of exposure duration and the weighted hand-arm vibration exposure value according to ISO 5349-1. RESULTS: The retrospective/prospective incidence of Raynaud's phenomenon was 16/14 per 1000 exposure years among exposed and 2.4/5.0 per 1000 years among the not exposed. The retrospective dose response curve based on 4 dose classes showed that class 2, 3 and 4 had similar response and showed higher incidence than the not-exposed. The dose with RP response to hand-arm vibration corresponded to a 10 year A(8) value between 0.4-1.0 m/s2. CONCLUSION: The results indicate that the EU directive on an action value for hand-arm vibration of 2.5 m/s2 is not too low. Rather, it suggests that employers should take on actions even at exposure values of 1 m/s2A(8).