The protective effects of 6-CySeCD with GPx activity against UVB-induced injury in HaCaT cells.

BACKGROUND: The generation of harmful reactive oxygen species (ROS) induced by UVB irradiation could induce cell apoptosis and change the cell cycle. 6A,6A'-dicyclohexylamine-6B,6B'-diselenide-bis-ß-cyclodextrin (6-CySeCD) is a novel glutathione peroxidase (GPx; EC 1.11.1.9) mimic. The aim of this study was to investigate the anti-oxidative effects of 6-CySeCD in cultured immortalised human keratinocyte cells (HaCaT). METHODS: HaCaT cells were treated with 30 mJ/cm(2) UVB to establish a damage model. The cultured HaCaT cells were randomly assigned to the control, UVB and treatment groups. The treatment group was incubated with 20 µmol/L of GPx mimics before UVB irradiation. Cell viability was detected by (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay, the level of lipid peroxidation was determined by the formation of malondialdehyde (MDA), DNA fragmentation was observed using agarose gel electrophoresis and the levels of intracellular ROS and cell cycle progression were measured by flow cytometry. RESULTS: The levels of cytotoxicity, intracellular ROS, lipid peroxidation and oxidative DNA damage significantly increased after UVB irradiation in the HaCaT cells. UVB irradiation caused pre-G1 -phase arrest in HaCaT cells and significantly reduced the number of HaCaT cells in the S phase. The GPx mimics 6-CySeCD and 2-phenyl-l,2-benzisoselenazol-3(2H)-one (ebselen) significantly blocked UVB-induced apoptosis and changed the cell cycle of the HaCaT cells. The blocked effect of pretreatment 6-CySeCD in UVB-irradiated HaCaT cells was better than that of pretreatment with ebselen. CONCLUSION: 6-CySeCD can relieve the damage induced by UVB irradiation in HaCaT cells.

A novel selenium and copper-containing peptide with both superoxide dismutase and glutathione peroxidase activities.

Superoxide dismutase (SOD), glutathione peroxidase (GPX) and catalase (CAT) play crucial roles in balancing the production and decomposition of reactive oxygen species (ROS) in living organisms. These enzymes act cooperatively and synergistically to scavenge ROS. In order to imitate the synergism of these enzymes, we designed and synthesized a novel 32-mer peptide (32P) on the basis of the previous 15-mer peptide with GPX activity and a 17-mer peptide with SOD activity. Upon the selenation and chelation of copper, the 32-mer peptide is converted to a new Se- and Cu-containing 32-mer peptide (Se-Cu-32P) and displays both SOD and GPX activities and its kinetics was studied. Moreover, the novel peptide was demonstrated to be able to better protect vero cells from the injury induced by xanthine oxidase (XOD)/xanthine/Fe2+ damage system than its parents. Thus, this bifunctional enzyme imitated the synergism of SOD and GPX and could be a better candidate of therapeutic medicine.

An insight into the protection of rat liver against ischemia/reperfusion injury by 2-selenium-bridged beta-cyclodextrin.

AIM: The reperfusion following liver ischemia results in the damage and apoptosis of hepatocytes. The aim of this study was to investigate the possible effects and mechanism of a new synthesized glutathione peroxidase (GPX) mimic, 2-selenium-bridged beta-cyclodextrin (2-SeCD), on rat liver ischemia-reperfusion (I/R) injury. METHODS: Male Wistar rats (n = 32) were randomly divided into four groups: I. sham-operated group, II. I/R group, III. I/R +2-SeCD group, IV. I/R + Ebselen group. Hepatic I/R was administered by 90 min of ischemia and 12 h of reperfusion. Liver tissues were collected at the end of reperfusion period for measurement of various biochemical parameters. RESULTS: The serum aspartate aminotransferase (AST), alanine aminotransferase (ALT) activity and tissue malondialdehyde, myeloperoxidase levels were increased in I/R group, while the increase was significantly reduced by 2-SeCD treatment. The glutathione level, depressed by I/R, was elevated back to normal levels by treatment with 2-SeCD. Severe hepatic damage were observed by light and transmission electron microscopy whilst pretreatment with 2-SeCD resulted in tissue and cellular preservation. Furthermore, 2-SeCD reduced cytochrome c release from mitochondria and subsequent DNA fragmentation by regulating Bcl-2/Bax expression ratio. RESULTS suggested that 2-SeCD was more effective than ebselen in the reversal of the alteration in tissue structural and biochemical parameters caused by I/R injury. CONCLUSION: 2-selenium-bridged beta-cyclodextrin playes an important role in the protection of liver against I/R injury and this treatment may be a novel pharmacological agent for liver surgery.

A trifunctional enzyme with glutathione S-transferase, glutathione peroxidase and superoxide dismutase activity.

Superoxide dismutase (SOD), glutathione peroxidase (GPX), glutathione S-transferase (GST) and glutathione reductase (GR) play crucial roles in balancing the production and decomposition of reactive oxygen species (ROS) in living organisms. These enzymes act cooperatively and synergistically to scavenge ROS, as not one of them can singlehandedly clear all forms of ROS. In order to imitate the synergy of the enzymes, we designed and generated a recombinant protein, which comprises of a Schistosoma japonicum GST (SjGST) and a bifunctional 35-mer peptide with SOD and GPX activities. The engineered protein demonstrated SOD, GPX and GST activities simultaneously. This trifunctional enzyme with SOD, GPX and GST activities is expected to be the best ROS scavenger.

Functional mimicry of the active site of glutathione peroxidase by glutathione imprinted selenium-containing protein.

For imitating the active site of antioxidant selenoenzyme glutathione peroxidase (GPx), an artificial enzyme selenosubtilisin was employed as a scaffold for reconstructing substrate glutathione (GSH) specific binding sites by a bioimprinting strategy. GSH was first covalently linked to selenosubtilisin to form a covalent complex GSH-selenosubtilisin through a Se-S bond, then the GSH molecule was used as a template to cast a complementary binding site for substrate GSH recognition. The bioimprinting procedure consists of unfolding the conformation of selenosubtilisin and fixing the new conformation of the complex GSH-selenosubtilisin. Thus a new specificity for naturally occurring GPx substrate GSH was obtained. This bioimprinting procedure facilitates the catalytic selenium moiety of the imprinted selenosubtilisin to match the reactive thiol group of GSH in the GSH binding site, which contributes to acceleration of the intramolecular catalysis. These imprinted selenium-containing proteins exhibited remarkable rate enhancement for the reduction of H2O2 by GSH. The average GPx activity was found to be 462 U/micromol, and it was approximately 100 times that for unimprinted selenosubtilisin. Compared with ebselen, a well-known GPx mimic, an activity enhancement of 500-fold was observed. Detailed steady-state kinetic studies demonstrated that the novel selenoenzyme followed a ping-pong mechanism similar to the naturally occurring GPx.

A novel dicyclodextrinyl diselenide compound with glutathione peroxidase activity.

A 6A,6A'-dicyclohexylamine-6B,6B'-diselenide-bis-beta-cyclodextrin (6-CySeCD) was designed and synthesized to imitate the antioxidant enzyme glutathione peroxidase (GPX). In this novel GPX model, beta-cyclodextrin provided a hydrophobic environment for substrate binding within its cavity, and a cyclohexylamine group was incorporated into cyclodextrin in proximity to the catalytic selenium in order to increase the stability of the nucleophilic intermediate selenolate. 6-CySeCD exhibits better GPX activity than 6,6'-diselenide-bis-cyclodextrin (6-SeCD) and 2-phenyl-1,2-benzoisoselenazol-3(2H)-one (Ebselen) in the reduction of H(2)O(2), tert-butyl hydroperoxide and cumenyl hydroperoxide by glutathione, respectively. A ping-pong mechanism was observed in steady-state kinetic studies on 6-CySeCD-catalyzed reactions. The enzymatic properties showed that there are two major factors for improving the catalytic efficiency of GPX mimics. First, the substrate-binding site should match the size and shape of the substrate and second, incorporation of an imido-group increases the stability of selenolate in the catalytic cycle. More efficient antioxidant ability compared with 6-SeCD and Ebselen was also seen in the ferrous sulfate/ascorbate-induced mitochondria damage system, and this implies its prospective therapeutic application.

Single chain antibody displays glutathione S-transferase activity.

Substrate binding and the subsequent reaction are the two principal phenomena that underlie the activity of enzymes, and many enzyme-like catalysts were generated based on the phenomena. The single chain variable region fragment of antibody 2F3 (scFv2F3) was elicited against hapten GSH-S-DN2phBu, a conjugate of glutathione (GSH), butyl alcohol, and 1-chloro-2,4-dinitrobenzene (CDNB); it can therefore bind both GSH and CDNB, the substrates of native glutathione S-transferases (GSTs). It was shown previously that there is a serine residue that is the catalytic group of GST in the CDR regions of scFv2F3 close to the sulfhydryl of GSH. Thus, we anticipated that scFv2F3 will display GST activity. The experimental results showed that scFv2F3 indeed displayed GST activity that is equivalent to the rat-class GST T-2-2 and exhibited pH- and temperature-dependent catalytic activity. Steady-state kinetic studies showed that the Km values for the substrates are close to those of native GSTs, indicating that scFv2F3 has strong affinities for the substrates. Compared with some other GSTs, its kcat value was found to be low, which could be caused by the similarity between the GSH-S-DN2phBu and the reaction product of GSH and CDNB. These results showed that our approach to imitating enzymes is correct, which is that an active site may catalyze a chemical reaction when a catalytic group locates beside a substrate-binding site of a receptor. It is important to consider product inhibition in hapten design in order to obtain a mimic with a high catalytic efficiency.

Cyclodextrin-derived mimic of glutathione peroxidase exhibiting enzymatic specificity and high catalytic efficiency.

To elucidate the relationships between molecular recognition and catalytic ability, we chose three assay systems using three different thiol substrates, glutathione (GSH), 3-carboxyl-4-nitrobenzenethiol (CNBSH), and 4-nitrobenzenethiol (NBSH), to investigate the glutathione peroxidase (GPx) activities of 2,2'-ditellurobis(2-deoxy-beta-cyclodextrin) (2-TeCD) in the presence of a variety of structurally distinct hydroperoxides (ROOH), H2O2, tert-butyl peroxide (tBuOOH), and cumene peroxide (CuOOH), as the oxidative reagent. A comparative study of the three assay systems revealed that the cyclodextrin moiety of the GPx mimic 2-TeCD endows the molecule with selectivity for ROOH and thiol substrates, and hydrophobic interactions are the most important driving forces in 2-TeCD complexation. Furthermore, in the novel NBSH assay system, 2-TeCD can catalyze the reduction of ROOH about 3.4 x 10(5) times more efficiently than diphenyl diselenide (PhSeSePh), and its second-order rate constants for thiol are similar to some of those of native GPx. This comparative study confirms that efficient binding of the substrate is essential for the catalytic ability of the GPx mimic, and that NBSH is the preferred thiol substrate of 2-TeCD among the chosen thiol substrates. Importantly, the proposed mode of action of 2-TeCD imitates the role played by several possible noncovalent interactions between enzymes and substrates in influencing catalysis and binding.

Engineering glutathione transferase to a novel glutathione peroxidase mimic with high catalytic efficiency. Incorporation of selenocysteine into a glutathione-binding scaffold using an auxotrophic expression system.

Glutathione peroxidase (GPx, EC 1.11.1.9) protects cells against oxidative damage by catalyzing the reduction of hydroperoxides with glutathione (GSH). Several attempts have been made to imitate its function for mechanical study and for its pharmacological development as an antioxidant. By replacing the active site serine 9 with a cysteine and then substituting it with selenocysteine in a cysteine auxotrophic system, catalytically essential residue selenocysteine was bioincorporated into GSH-specific binding scaffold, and thus, glutathione S-transferase (GST, EC 2.5.1.18) from Lucilia cuprina was converted into a selenium-containing enzyme, seleno-LuGST1-1, by genetic engineering. Taking advantage of the important structure similarities between seleno-LuGST1-1 and naturally occurring GPx in the specific GSH binding sites and the geometric conformation for the active selenocysteine in their common GSH binding domain-adopted thioredoxin fold, the as-generated selenoenzyme displayed a significantly high efficiency for catalyzing the reduction of hydrogen peroxide by glutathione, being comparable with those of natural GPxs. The catalytic behaviors of this engineered selenoenzyme were found to be similar to those of naturally occurring GPx. It exhibited pH and temperature-dependent catalytic activity and a typical ping-pong kinetic mechanism. Engineering GST into an efficient GPx-like biocatalyst provided new proof for the previous assumption that both GPx and GST were evolved from a common thioredoxin-like ancestor to accommodate different functions throughout evolution.

Selection of phage antibodies with GPX activity by combination of phage displayed antibody library with chemical modification and their characterization using a surface plasmon resonance biosensor.

Glutathione peroxidase (GPX) is an important antioxidant enzyme, which plays an important role in scavenging reactive oxygen species. To obtain humanized GPX catalytic antibodies, the phage displayed human antibody library on the surface of the filamentous bacteriophage was used to select novel antibodies by repetitive screening. Phage antibodies B8, H6 and C1 with the GSH-binding site were obtained from the library by enzyme-linked immunosorbent assay (ELISA) analysis with four rounds of selection against three haptens, S-2,4-dinitrophenyl t-butyl ester [GSH-S-DNP-Bu (B)], S-2,4-dinitrophenyl t-hexyl ester [GSH-S-DNP-He (H)] and S-2,4-dinitrophenyl cycle-hexyl ester [GSH-S-DNP-cHe (C)], and characterized using surface plasmon resonance (SPR) biosensor. The gold layer was modified by dithiodiglycolic acid (DDA) and three haptens were easily attached to DDA by self-assembling to form a biosensor membrane. The membrane bounds specifically corresponding antibodies. The kinetic process of the reaction between phage antibodies and their haptens was studied by SPR biosensor. In order to improve selectivity, chemical modification was used to incorporate directly catalytic group selenocysteine (Sec) into selected phage clone B8, H6 and C1 to form Se-B8, Se-H6 and Se-C1, respectively. The GPX activities of Se-B8, Se-H6 and Se-C1 were found to be 3000, 2000 and 700units/mumol, respectively. Compared with conventional ELISA analysis, the proposed method based on SPR biosensor is much more rapid and simpler.

Towards more efficient glutathione peroxidase mimics: substrate recognition and catalytic group assembly.

Glutathione peroxidase (GPX) is a well-known selenoenzyme that functions as an antioxidant and catalyzes the reduction of harmful peroxide by glutathione and protects cells against oxidative damage. Because many diseases are related to oxidative stress, GPX is an ancient foe of many diseases. Antioxidants are very useful for biological bodies, and considerable effort has been spent to find compounds that could imitate the properties of GPX. This paper reviews GPX mimics developed so far and describes a new, more effective strategy for fabricating them. Although many GPX mimics have been made, they possess serious disadvantages: low activity, low solubility in water, and, in some cases, toxicity. In order to overcome these drawbacks, we have proposed a new strategy of imitating GPX. First, a receptor with a substrate binding site is generated. Next, a catalytic group is incorporated into the receptor near the substrate binding site, allowing the catalytic group access to the functional group of the substrate. Finally, a highly efficient enzyme mimic is obtained. Using this strategy, we successfully fabricated GPX mimics that use antibodies, cyclodextrins, some enzymes and proteins as receptors and chemical modification to incorporate the catalytic group, selenocysteine (Sec). The general principle of combining a functional group involved in catalysis with a specific binding site for the substrate is an approach that could be applied to the generation of other efficient semisynthetic biocatalysts. We describe the antioxidant activities of these GPX mimics and the reasons of their being promising candidates for medicinal applications.

The progress in mechanism of selenoprotein biosynthesis.

As the twenty-first amino acid, selenocysteine can be co-translationally incorporated into the polypeptide chain at UGA codon in the coding region of selenoprotein mRNA. The incorporation of selenocysteine needs a cis-acting element SECIS and four gene products: SelA, SelB, SelC and SelD. The position of SECIS in the mRNA of prokaryote and its structural features are greatly different from that of eukaryote. The researchers have made exploration in selenoprotein engineering by virtue of the mechanism of selenocysteine incorporation in Escherichia coli.

[Studies on the optimal expression condition, purification and its characterization of ScFv-2F3].

The expression vectors of the gene encoding ScFv-2F3 were transformed into E. coli BL21(DE3). Clones of higher expression were first selected, then were grown in the presence of IPTG at 37 degrees C to induce its expression. The culture conditions were carefully optimized. It was found that optimal conditions were as follows: the induction was started as OD590 reached to 1.0-1.8; the concentration of IPTG was 0.3-0.5 mmol/L and induction time is 7 h. The yield of ScFv-2F3 expressed in the selected clones is about 20% of the total proteins. The optimal culture conditions were successfully applied to fermenter of 50 L. The conditions of washing the inclusion bodies were also optimized. A two-step method was used to renature the inclusion body. The expression product of interest and its biological activities were characterized with Western blotting and ELISA. A novel selenium-containing single-chain abzyme with GPX activity was prepared.