Furanonyl amino acid derivatives as hemostatic drugs: design, synthesis and hemostasis performance.

Using 3,4-dihalo-2(5H)-furanones and easily available hemostatic drugs, such as tranexamic acid (TA), 4-aminomethylbenzoic acid (ABA), aminocaproic acid (AA) as starting materials, serial multi-functional molecules 2(5H)-furanonyl amino acids are designed by the combination of different pharmacophores, and successfully synthesized by a transition metal-free Michael addition-elimination reaction. The reaction is carried out under mild conditions with ethanol-dichloromethane as solvent and only stirring at room temperature for 24 h, and the yield can be up to 91%. All products are well characterized by infrared spectroscopy (IR), nuclear magnetic resonance (NMR), high-resolution mass spectra (HRMS). Ten typical target compounds among them are selected out for the experiments of hemostasis performance by the evaluation of in vitro clot formation model and liver hemorrhage model. The test results show that, their hemostasis effect is better than the original drugs. Especially the target compound G, a TA derivative from 5-borneoloxy-3,4-dibromo-2(5H)-furanone, has the best hemostasis effect among all the tested compounds. These obtained target molecules are expected to be used as multi-functional hemostatic drugs.

Rational Design and Facile Synthesis of Dual-State Emission Fluorophores: Expanding Functionality for the Sensitive Detection of Nitroaromatic Compounds.

Six novel benzimidazole-based D-π-A compounds 4 a-4 f were concisely synthesized by attaching different donor/acceptor units to the skeleton of 1,3-bis(1H-benzimidazol-2-yl)benzene on its 5-position through an ethynyl link. Due to the twisted conformation and effective conjugation structure, these dual-state emission (DSE) molecules show intense and multifarious photoluminescence, and their fluorescence quantum yields in solution and solid state can be up to 96.16 and 69.82 %, respectively. Especially, for excellent photostability, obvious solvatofluorochromic and extraordinary wide range of solvent compatibility, DSE molecule 4 a is a multifunctional fluorescent probe for the visual detection of nitroaromatic compounds (NACs) with the limit of detection as low as 10-7 M. The quenching mechanism has been proved as the results of photoinduced electron transfer and fluorescence resonance energy transfer processes. Importantly, probe 4 a can sensitively detect NACs not only in real water samples, but also on 4 a-coated strips and 4 a@PBAT thin films.

N-alkylation briefly constructs tunable multifunctional sensor materials: Multianalyte detection and reversible adsorption.

A series of N-alkyl-substituted polybenzimidazoles (SPBIs), synthesized by simple condensation and N-alkylation, act as functional materials with tunable microstructures and sensing performance. For their controllable morphologies, the formation of nano-/microspheres is observed at the n(RBr)/n(PBI) feed ratio of 5:1. Products with different degrees of alkylation can recognize metal ions and nitroaromatic compounds (NACs). For example, SPBI-c, obtained at the feed ratio of 1:1, can selectively detect Cu2+, Fe3+, and NACs. By contrast, SPBI-a, obtained at the feed ratio of 0.1:1, can exclusively detect Cu2+ with high sensitivity. Their sensing mechanisms have been studied by FT-IR spectroscopy, SEM, XPS, and DFT calculations. Interestingly, the SPBIs can adsorb Cu2+ in solution and show good recyclability. These results demonstrate that polymeric materials with both sensing and adsorption applications can be realized by regulating the alkylation extent of the main chain, thus providing a new approach for the facile synthesis of multifunctional materials.

Preparation of Large Conjugated Polybenzimidazole Fluorescent Materials and Their Application in Metal Ion Detection.

A new type of conjugated polybenzimidazole (CPBI) was synthesized through a simple polycondensation reaction without metal catalysis, and N-alkylation modification was carried out to solve the problems of solubility and fluorescence properties. A series of nano-microsphere polymers CPBIn with large conjugation, good solubility, and strong fluorescence has been successfully used as "turn-off" fluorescent probes for the first time. The results show that, under suitable N-alkylation conditions, the obtained CPBIn can be used as a highly sensitive and selective fluorescent probe for the detection of Cu2+ and Zn2+ at the same time, and their detection limits are both nM levels. In addition, CPBI2 can be designed as an ultra-sensitive IMPLICATION logic gate at the molecular level, cyclically detecting Cu2+. With the test paper containing CPBI2, easy and quick on-site detection can be achieved. This research provides a new idea for the brief synthesis of multifunctional materials.

Simple inorganic base promoted C-N and C-C formation: synthesis of benzo[4,5]imidazo[1,2-a]pyridines as functional AIEgens used for detecting picric acid.

Metal-free catalyzed intermolecular tandem Michael addition/cyclization has been developed for the synthesis of benzo[4,5]imidazo[1,2-a]pyridines from α-bromocinnamaldehyde and 2-substituted benzimidazoles. The reaction promoted by a simple inorganic base displays moderate to good yields and good functional group tolerance. The optical properties of some typical products have been investigated. We found that, due to the presence of the benzene ring at the C1-position of benzo[4,5]imidazo[1,2-a]pyridines which restricts intramolecular motion, as a new type of aggregation-induced emission (AIE) luminogen (AIEgen), they show very good solid-state fluorescence with quantum yields up to 88.80%. Importantly, the AIE performance of compound 3b can be useful to detect the nitroaromatic explosive picric acid (PA) with a detection limit and quenching constant of 42.5 nM and 7.27 × 104 M-M, respectively.

Controllable preparation and performance of bio-based poly(lactic acid-iminodiacetic acid) as sustained-release Pb2+ chelating agent.

The bio-based lactic acid (LA) and the common metal ion chelating agent iminodiacetic acid (IDA) are used to design and prepare a polymeric sustained-release Pb2+ chelating agent by a brief one-step reaction. After the analysis on theoretical calculation for this reaction, poly(lactic acid-iminodiacetic acid) [P(LA-co-IDA)] with different monomer molar feed ratios is synthesized via direct melt polycondensation. P(LA-co-IDA) mainly has star-shaped structure, and some of them have two-core or three-core structure. Thus, a possible mechanism of the polymerization is proposed. The degradation rate of P(LA-co-IDA)s can reach 70% in 4 weeks. The change of IDA release rate is consistent with the trend of the degradation rate, and the good Pb2+ chelating performance is confirmed. P(LA-co-IDA) is expected to be developed as a lead poisoning treatment drug or Pb2+ adsorbent in the environment with long-lasting effect, and this research provides a new strategy for the development of such drugs.

Polymer-capped CdSe/ZnS quantum dots for the sensitive detection of Cu2+ and Hg2+ and the quenching mechanism.

In this work, poly(styrene-co-maleic anhydride)-capped CdSe/ZnS quantum dots (QDs) aminolyzed with ethanolamine are proposed as fluorescent probes for the detection of Cu2+ and Hg2+, and two different quenching mechanisms are discussed in detail. The coordination abilities of the surface polymer of CdSe/ZnS QDs and two metal ions are calculated by density functional theory (DFT). The photoinduced electron transfer from excited QDs to Cu2+ unoccupied orbitals is enhanced due to the coordination between Cu2+ and the surface polymer of QDs. The electron transfer consumes non-radiative energy and performs fluorescence quenching. For Hg2+, the formation of HgS and the slight aggregation of polymer-coated CdSe/ZnS QDs lead to fluorescence quenching. The probe is sensitive to both Cu2+ and Hg2+, and the response can be detected within 1 min without adjusting the pH. With the addition of a masking agent, Cu2+ and Hg2+ can be exclusively detected in coexistence with another ion. For Cu2+, a linear relation in the concentration ranging from 0.02 to 0.7 µM was found between the relative fluorescence intensity (F0/F) and the concentration of Cu2+; the limit of detection (S/N = 3) is 6.94 nM. For Hg2+, a linear relation ranging from 0.1 to 1.4 µM was found between ln(F0/F) and the concentration of Hg2+; the limit of detection is 20.58 nM.

Synthesis of N-2(5H)-furanonyl sulfonyl hydrazone derivatives and their biological evaluation in vitro and in vivo activity against MCF-7 breast cancer cells.

A series of (E)-N-2(5H)-furanonyl sulfonyl hydrazone derivatives have been rationally designed and efficiently synthesized by one-pot reaction with good yields for the first time. This green approach with wide substrate range and good selectivity can be achieved at room temperature in a short time in the presence of metal-free catalyst. The cytotoxic activities against three human cancer cell lines of all newly obtained compounds have been evaluated by MTT assay. Among them, compound 5 k exhibits high cytotoxic activity against MCF-7 human breast cancer cells with an IC50 value of 14.35 µM. The cytotoxic mechanism may involve G2/M phase arrest pathway, which is probably caused by activating DNA damage. Comet test and immunofluorescence results show that compound 5 k can induce DNA damage in time- and dose-dependent manner. Importantly, 5 k also can effectively inhibit the proliferation of MCF-7 cells and angiogenesis in the zebrafish xenograft model. It is potential to further develop N-2(5H)-furanonyl sulfonyl hydrazone derivatives as potent drugs for breast cancer treatment with higher cytotoxic activity by modifying the structure of the compound.

1,1-Diphenylvinylsulfide as a Functional AIEgen Derived from the Aggregation-Caused-Quenching Molecule 1,1-Diphenylethene through Simple Thioetherification.

An efficient and readily scalable thioetherification between 1,1-diphenylethene (DPE) and sodium arylsulfinate was developed for the synthesis of 1,1-diphenylvinylsulfide (DPVS) with the yield up to 99 %. The photophysical properties of DPVS show that the introduction of arylsulfenyl groups onto the parent molecule DPE makes DPVS a novel type of aggregation-induced emission (AIE) luminogen (AIEgen) with large Stoke's shift (up to 188 nm). These DPVS possess AIE properties due to restriction of intramolecular motions (RIM), as demonstrated by crystal structure analysis. Importantly, the AIE performance of DPVS can be applied to sense the nitroaromatic explosive picric acid in aqueous systems through a "turn-off" response.

Synthesis of amino acid derivatives of 5-alkoxy-3,4-dihalo-2(5H)-furanones and their preliminary bioactivity investigation as linkers.

A series of amino acid derivatives are successfully synthesized via a metal-free C-N coupling reaction of 5-alkoxy-3,4-dihalo-2(5H)-furanones and amino acids. Their structures are well characterized with 1H NMR, 13C NMR, ESI-MS and elemental analysis. As potential linkers of the 2(5H)-furanone unit with other drug moieties containing a hydroxyl or amino group, the effect of amino acids is investigated by comparison with other 2(5H)-furanone compounds by constructing C-O/C-S bonds. The preliminary results of the biological activity assay by the MTT method on a series of cancer cell lines in vitro reveal that the introduction of amino acids basically has no toxic effect. This can lead to these 2(5H)-furanone derivatives being further well-linked with other bioactive moieties with amino or hydroxy groups as expected. Thus, the biological activity assay gives a direction for the design of bioactive 2(5H)-furanones based on these amino acid linkers.

Quick construction of a C-N bond from arylsulfonyl hydrazides and Csp2-X compounds promoted by DMAP at room temperature.

An efficient approach for C-N bond construction by the coupling reaction of arylsulfonyl hydrazides and Csp2-X compounds is described for the first time with good yields at room temperature. The reaction promoted by the simple base DMAP displays excellent regioselectivity as well as high functional group tolerance with 41 examples. Even for inactive Csp2-Cl compounds, the metal-free transformation also affords a satisfactory yield after prolonging the reaction time, which is comparable to that of the corresponding Csp2-Br compound. The good effect of DMAP and its action mechanism are confirmed by the competitive experiments of reactivity between Cl-substituted and Br-substituted substrates and the single-crystal X-ray analysis of the key intermediate quaternary ammonium salt. Importantly, the application of this method for a gram-scale (even over 10 g) preparation can be accomplished.

Novel dual-functional fluorescent sensors based on bis(5,6-dimethylbenzimidazole) derivatives for distinguishing of Ag+ and Fe3+ in semi-aqueous medium.

Three novel bisbenzimidazole derivatives have been synthesized and developed as dual-functional fluorescent sensors for the rapid and highly selective detection of Ag+ and Fe3+ ions in semi-aqueous medium with distinct spectral response for the first time. The absorption intensity is drastically decreased after the addition of Ag+. Contrarily, it is markedly increased upon the addition of Fe3+. And there is a good linear relation at low concentration of both Ag+ and Fe3+, which provides a quantitative method for their detection. Similarly, the sensors show a distinct fluorescence response towards Ag+ and Fe3+ with a different fluorescence color change under UV light. In addition, no significant changes and interference can be observed with other metal ions. The sensing mechanism studies confirm that the N atom in CN of benzimidazole ring of sensor 4a may bind with Ag+ or Fe3+ ion to form metal complex. And there is only a static quenching process for the 4-Ag+ complex system, but both dynamic and static quenching processes occur in the 4-Fe3+ complex system. Moreover, sensors 4 can steadily work in solution with a wide range of pH 4-13 and rapidly respond to Ag+ and Fe3+ with a response time of 10 s. Finally, the sensors have been successfully applied to the visual detection of Ag+ and Fe3+ not only in solution, but also in test paper.

Disproportionate Coupling Reaction of Sodium Sulfinates Mediated by BF3·OEt2: An Approach to Symmetrical/Unsymmetrical Thiosulfonates.

The BF3·OEt2-mediated disproportionate coupling reaction of sodium sulfinates was found for the first time. In this reaction, various S-S(O)2 bonds can be formed, efficiently giving thiosulfonates in moderate to excellent yields. As a convenient protocol for the synthesis of symmetrical and unsymmetrical thiosulfonates, its reaction mechanism involves the formation of a thiyl radical and sulfonyl radical via a sulfinyl radical disproportionation. What is more, this transformation can also be applied practically as a gram-scale reaction and to the two-step synthesis of sulfone and sulfonamide in one pot in situ using thiosulfonate as an intermediate.

Bis-2(5H)-furanone derivatives as new anticancer agents: Design, synthesis, biological evaluation, and mechanism studies.

New bis-2(5H)-furanone derivatives containing a benzidine core were synthesized via a one-step transition-metal-free reaction of benzidine with 5-substituted 3,4-dihalo-2(5H)-furanones. Their antitumor activities against various tumor cells have been evaluated by MTT assay. Among them, compound 4e exhibits significant inhibitory activity against C6 glioma cells with an IC50 value of 12.1 µm and low toxicity toward HaCaT human normal cells. Studies on the antitumor mechanism reveal that cell cycle arrest at S-phase in C6 cells is induced by compound 4e. Furthermore, investigations with electronic, fluorescence emission and circular dichroism spectra show that compound 4e can significantly interact with C6-DNA. These data indicate that DNA may be one of the potential targets for bis-2(5H)-furanone derivatives as anticancer drugs.

Synthesis and biological evaluation of 4-biphenylamino-5-halo-2(5H)-furanones as potential anticancer agents.

An efficient route without metal catalyst has been developed for synthesis of 4-biphenylamino-5-halo-2(5H)-furanones. The antitumor activities against various tumor cells of all the compounds have been evaluated by MTT assay. Among them, the compound 3j exhibits significant inhibitory activity against MCF-7 human breast cancer cells with an IC50 value of 11.8 µM and low toxicity toward HaCaT human normal cells. The mechanism studies confirm that 3j can induce cell cycle arrest at G2/M phase in MCF-7 cells. Compared with compound 3e, 3j has stronger binding affinity to c-myc G-quadruplex (G4) DNA via π-π stacking and H-bonding interactions. Western blot analysis also further confirms that compound 3j can down-regulate the expression of c-myc in MCF-7 cells.

Self-assembled structures of N-alkylated bisbenzimidazolyl naphthalene in aqueous media for highly sensitive detection of picric acid.

A 2,6-dibenzimidazole-appended naphthalene derivative flanking with two N-alkyl chains (sensor 4) was designed and applied for highly sensitive detection of picric acid (PA) in aqueous media. Driven by the hydrophobicity of alkyl chain and π-π stacking effect of aryl, sensor 4 can undergo self-assembly to form an orderly rod-like structure in H2O/THF (v/v, 90/10) solution, as shown by the dynamic light scattering (DLS) and scanning electron microscopy (SEM) studies. Sensor 4 shows high selectivity and sensitivity toward PA over other nitroaromatic explosives. DFT calculations and 1H NMR, the time-correlated single photon counting (TCSPC) experiments confirm that the quenching mechanism is due to both electron and energy transfer from the electron-rich sensor 4 to the electron-deficient PA. Sensor 4 can detect as low as 0.57 ppb PA in aqueous media and 11.46 ag cm-2 PA by contact mode. Importantly, sensor 4 exhibits low interference against common solvents, metal ions and anions. Thus, it is practically applicable for sensing PA in real environmental samples and vapor phase.

Preparation and Characterization of Poly-1,2,3-triazole with Chiral 2(5H)-Furanone Moiety as Potential Optical Brightening Agents.

A series of novel heterocyclic polymers with fluorescent brightening properties are synthesized via Click polymerization. Fast synthesis of poly-1,2,3-triazoles (M n ≥ 9.31 kDa) is described herein, with a high yield of up to 95%. The Click polymerization approach has a number of advantages, including facile operation and outstanding isolation yield. The resultant polymers have a high thermal stability, excellent UV resistance, as well as acid and light fastness. On embedding with optical brightening agents, the polymers display strong fluorescent brightening properties in the tetrahydrofuran solution. Moreover, these products have a strong solution emission intensity and extraordinary photostability under UV light.

Preparation and characterization of amine-functionalized sugarcane bagasse for CO2 capture.

A low-cost solid amine adsorbent for CO2 capture was prepared by using sugarcane bagasse (SB), a dominant agro-industrial residue in the sugar and alcohol industry as raw materials. In this preparation process, acrylamide was grafted on SB, and the grafted fiber was then aminated with different type of amine reagents to introduce primary and secondary amine groups onto the surface of SB fibers. The graft and amination conditions were optimized. The prepared solid amine adsorbent showed remarkable CO2 adsorption capacity and the adsorption capacity of the solid amine adsorbent could reach 5.01 mmol CO2/g at room temperature. The comparison of adsorption capacities of amine fibers aminated with various amination agents demonstrated that fibers aminated with triethylenetetramine would obtain higher adsorption capacities and higher amine efficiency. These adsorbents also showed good regeneration performance, the regenerated adsorbent could maintain almost the same adsorption capacity for CO2 after 10 recycles.

Design, synthesis, and characterization of 1,3,5-tri(1H-benzo[d]imidazol-2-yl)benzene-based fluorescent supramolecular columnar liquid crystals with a broad mesomorphic range.

A new kind of supramolecular columnar liquid crystal T-A with a broad mesomorphic range (up to 164.9 °C), good thermal stability, and strong fluorescence is designed and formed by the H-bonding between 1,3,5-tri(1H-benzo[d]imidazol-2-yl)benzene (T) and serial gallic acid derivatives (A). Two components are easily available because of simple routes, common reactions, high yields, commercial starting materials, and inexpensive catalysts. The introduction of the 1,2,3-triazole structure into component A makes the textures different and is slightly disadvantageous for the T-A complexes.