Magnetic-field-assisted optical fiber quantum temperature sensor with enhanced sensitivity.

In recent years, utilizing nitrogen-vacancy color centers in diamond for temperature sensing has drawn great attention. However, increasing the sensitivity has encountered challenges due to the intrinsic temperature-dependent energy level shift, i.e., temperature responsivity, being limited to -74 kHz/K. In this Letter, we take advantage of the magnetic field to regulate the energy level to enhance temperature sensitivity. The sensor is formed by adhering a micron-sized diamond on the end face of an optical fiber, and a small magnet is mounted at a certain distance with the diamond exploiting a cured polydimethylsiloxane block as the bridge. The temperature change leads to the variation of the distance between the diamond and the magnet, thus affecting the magnetic strength felt by the diamond. This finally contributes an additional temperature-induced energy level shift, giving rise to an enhanced sensitivity. Experimental results demonstrated the proposed scheme and achieved a 4.2-fold improvement in the temperature responsivity and a 2.1-fold enhancement in sensitivity. Moreover, the diamond and the fiber-optic integrated structure improve the portability of the sensor.

Self-Assembled Monolayer and Nanoparticles Coenhanced Fragmented Silver Nanowire Network Memristor.

Silver nanowire (AgNW) networks with self-assembled structures and synaptic connectivity have been recently reported for constructing neuromorphic memristors. However, resistive switching at the cross-point junctions of the network is unstable due to locally enhanced Joule heating and the Gibbs-Thomson effect, which poses an obstacle to the integration of threshold switching and memory function in the same AgNW memristor. Here, fragmented AgNW networks combined with Ag nanoparticles (AgNPs) and mercapto self-assembled monolayers (SAMs) are devised to construct memristors with stable threshold switching and memory behavior. In the above design, the planar gaps between NW segments are for resistive switching, the AgNPs act as metal islands in the gaps to reduce threshold voltage (Vth) and holding voltage (Vhold), and the SAMs suppress surface atom diffusion to avoid Oswald ripening of the AgNPs, which improves switching stability. The fragmented NW-NP/SAM memristors not only circumvent the side effects of conventional NW-stacked junctions to provide durable threshold switching at >Vth but also exhibit synaptic characteristics such as long-term potentiation at ultralow voltage (≪Vth). The combination of NW segments, nanoparticles, and SAMs blazes a new trail for integrating artificial neurons and synapses in AgNW network memristors.

Multifunctional DNA scaffold mediated gap plasmon resonance: Application to sensitive PD-L1 sensor.

The introduction of noble metal nanoparticles with good LSPR characteristics can greatly improve the sensitivity of SPR through resonance coupling effect. The plasma resonance response and optical properties of film coupling nanoparticle systems largely depends on the ingenious design of gap structures. Nucleic acid nanostructures have good stability, flexibility, and high biocompatibility, making them ideal materials for gap construction. 2D MOF (Cu-Tcpp) has a large conjugated surface similar to graphene, which can provide a stable substrate for the directional fixation of nucleic acid nanostructures. However, research on gap coupling plasmon based on nucleic acid nanostructures and 2D MOF is still rarely reported. By integrating the advantages of Cu-Tcpp assembled film and DNA tetrahedron immobilization, a nano gap with porous scaffold structure between the gold film and gold nanorod was build. The rigidity of DNA tetrahedron can precisely control the gap size, and its unique programmability allows us to give the coupling structure greater flexibility through the design of nucleic acid chain. The experimental results and FDTD simulation show that the film coupling nanoparticle systems constructed with DNA tetrahedrons greatly enhance the electric field strength near the chip surface and effectively improve the sensitivity of SPR. This research shows the huge potential of nucleic acid nanomaterials in the construction of SPR chip surface microstructures.

MoS2-Nanoflower and Nanodiamond Co-Engineered Surface Plasmon Resonance for Biosensing.

Surface plasmon resonance (SPR) based sensors play an important role in the biological and medical fields, and improving the sensitivity is a goal that has always been pursued. In this paper, a sensitivity enhancement scheme jointly employing MoS2 nanoflower (MNF) and nanodiamond (ND) to co-engineer the plasmonic surface was proposed and demonstrated. The scheme could be easily implemented via physically depositing MNF and ND overlayers on the gold surface of an SPR chip, and the overlayer could be flexibly adjusted by controlling the deposition times, thus approaching the optimal performance. The bulk RI sensitivity was enhanced from 9682 to 12,219 nm/RIU under the optimal condition that successively deposited MNF and ND 1 and 2 times. The proposed scheme was proved in an IgG immunoassay, where the sensitivity was twice enhanced compared to the traditional bare gold surface. Characterization and simulation results revealed that the improvement arose from the enhanced sensing field and increased antibody loading via the deposited MNF and ND overlayer. At the same time, the versatile surface property of NDs allowed a specifically-functionalized sensor using the standard method compatible with a gold surface. Besides, the application for pseudorabies virus detection in serum solution was also demonstrated.

High-sensitivity optical-fiber magnetic sensor based on diamond and magnetic flux concentrators.

Magnetic field detection exploiting nitrogen-vacancy (NV) centers in diamond has gained increasing attention and development in recent years. Combining diamond NV centers to optical fibers provides a way for achieving magnetic sensors with high integration and portability. Meanwhile, new methods or techniques are urgently desired to improve the detection sensitivity of such sensors. In this paper, we present an optical-fiber magnetic sensor based on the NV ensemble in diamond, and employ the well-designed magnetic flux concentrators to enhance the sensitivity up to 12 pT/Hz1/2, an outstanding level among the diamond-integrated optical-fiber magnetic sensors. The dependence of sensitivity on the key parameters including the size and gap width of the concentrators are investigated by simulations and experiments, based on which the predictions on the further enhancement of sensitivity to fT level are presented.

Next-generation nanophotonic-enabled biosensors for intelligent diagnosis of SARS-CoV-2 variants.

Constantly mutating SARS-CoV-2 is a global concern resulting in COVID-19 infectious waves from time to time in different regions, challenging present-day diagnostics and therapeutics. Early-stage point-of-care diagnostic (POC) biosensors are a crucial vector for the timely management of morbidity and mortalities caused due to COVID-19. The state-of-the-art SARS-CoV-2 biosensors depend upon developing a single platform for its diverse variants/biomarkers, enabling precise detection and monitoring. Nanophotonic-enabled biosensors have emerged as 'one platform' to diagnose COVID-19, addressing the concern of constant viral mutation. This review assesses the evolution of current and future variants of the SARS-CoV-2 and critically summarizes the current state of biosensor approaches for detecting SARS-CoV-2 variants/biomarkers employing nanophotonic-enabled diagnostics. It discusses the integration of modern-age technologies, including artificial intelligence, machine learning and 5G communication with nanophotonic biosensors for intelligent COVID-19 monitoring and management. It also highlights the challenges and potential opportunities for developing intelligent biosensors for diagnosing future SARS-CoV-2 variants. This review will guide future research and development on nano-enabled intelligent photonic-biosensor strategies for early-stage diagnosing of highly infectious diseases to prevent repeated outbreaks and save associated human mortalities.

Highly Sensitive Multi-Channel Biosensor for Low-Interference Simultaneous Detection.

In this paper, we propose a multi-channel photonic crystal fiber sensor, which adopts dual-polarization and multiple materials to effectively reduce the mutual interference between channels and enhance the surface plasmon resonance, thus achieving simultaneous detection of a multi-channel with low interference. Four channels are polished around the cylindrical fiber, and then different metal films (gold or silver) and plasmonic materials (titanium dioxide, thallium pentoxide, or graphene) are added to the sensing area of each channel. All channels detect refractive indices in the range of 1.34 to 1.42. The sensing performance of the fiber optic sensor was numerically investigated using the full vector finite element method. After the optimization of structural parameters, the maximum wavelength sensitivity of channel-1, channel-2, channel-3, and channel-4 are 49,800 nm/RIU, 49,000 nm/RIU, 35,900 nm/RIU, and 36,800 nm/RIU, respectively. We have theoretically analyzed the sensor's capabilities for partial bio-detection and simulated its detection capability with a wavelength sensitivity of 11,500 nm/RIU for normal red blood cells and 12,200 nm/RIU for MCF-7 cancerous cells. Our proposed sensor has a novel design, can detect multiple channels simultaneously, has strong anti-interference capability and high sensitivity, and has good sensing characteristics.

Nanodiamond-Based Optical-Fiber Quantum Probe for Magnetic Field and Biological Sensing.

Owing to the unique electronic spin properties, nitrogen-vacancy (NV) centers hosted in diamond have emerged as a powerful quantum tool for detecting various physical parameters and biological species. In this work, an optical-fiber quantum probe, configured by chemically modifying nanodiamonds on the surface of a cone fiber tip, is developed. Based on the continuous-wave optically detected magnetic resonance method and lock-in amplification technique, it is found that the sensing performance of probes can be engineered by varying the nanodiamond dispersion concentration and modification duration during the chemical modification process. Combined with a pair of magnetic flux concentrators, the magnetic field detection sensitivity has reached 0.57 nT/Hz1/2@1 Hz, a new record among the fiber magnetometers based on nanodiamonds. Taking Gd3+ as the demo, the capability of probes in paramagnetic species detection is also demonstrated experimentally. Our work provides a new approach to develop NV centers as quantum probes featuring high integration, multifunction, high sensitivity, etc.

Self-assembly, alignment, and patterning of metal nanowires.

Armed with the merits of one-dimensional nanostructures (flexibility, high aspect ratio, and anisotropy) and metals (high conductivity, plasmonic properties, and catalytic activity), metal nanowires (MNWs) have stood out as a new class of nanomaterials in the last two decades. They are envisaged to expedite significantly and even revolutionize a broad spectrum of applications related to display, sensing, energy, plasmonics, photonics, and catalysis. Compared with disordered MNWs, well-organized MNWs would not only enhance the intrinsic physical and chemical properties, but also create new functions and sophisticated architectures of optoelectronic devices. This paper presents a comprehensive review of assembly strategies of MNWs, including self-assembly for specific structures, alignment for anisotropic constructions, and patterning for precise configurations. The technical processes, underlying mechanisms, performance indicators, and representative applications of these strategies are described and discussed to inspire further innovation in assembly techniques and guide the fabrication of optoelectrical devices. Finally, a perspective on the critical challenges and future opportunities of MNW assembly is provided.

Hyperbolic-Metamaterials-Based SPR Temperature Sensor Enhanced by a Nanodiamond-PDMS Hybrid for High Sensitivity and Fast Response.

A high-performance surface plasmon resonance (SPR) fiber sensor is proposed with hyperbolic metamaterials (HMMs), nanodiamonds (NDs), and polydimethylsiloxane (PDMS) to enhance the temperature sensitivity and response time. The HMM with tunable dispersion can break through the structural limitations of the optical fiber to improve the refractive index (RI) sensitivity, while NDs and PDMS with large thermo-optic coefficients enable to induce significant RI change under varied thermal fields. The ternary composite endows the sensor with a high temperature sensitivity of -9.021 nm/°C, which is 28.6 times higher than that of the conventional gold film-based SPR sensor. Furthermore, NDs with high thermal conductivity (2200 W/mK) effectively expedite the thermal response of PDMS, which reduces the response time from 80 to 6 s. It is believed that the proposed sensors with high sensitivity, fast response time, and compact size have great potential for applications in industrial production, healthcare, environmental monitoring, etc.

Chlorophyll Detection by Localized Surface Plasmon Resonance Using Functionalized Carbon Quantum Dots Triangle Ag Nanoparticles.

An optical sensor-based localized surface plasmon resonance (LSPR) sensor was demonstrated for sensitive and selective chlorophyll detection through the integration of amino-functionalized carbon quantum dots (NCQD) and triangle silver nanoparticles (AgNPs). The additions of amino groups to the CQD enhance the detection of chlorophyll through electrostatic interactions. AgNPs-NCQD composite was fabricated on the surface of the silanized glass slide using the self-assembly technique. The experimental results showed that the AgNPs-NCQD film-based LSPR sensor detects better than AgNPs and AgNPs-CQD films with a good correlation coefficient (R2 = 0.9835). AgNPs-NCQD showed a high sensitivity response of 2.23 nm ppm-1. The detection and quantification limits of AgNPs-NCQD are 1.03 ppm and 3.40 ppm, respectively, in the range of 0.05 to 6 ppm. Throughout this study, no significant interference was observed among the other ionic species (NO2-, PO4-, NH4+, and Fe3+). This study demonstrates the applicability of the proposed sensor (AgNPs-NCQD) as a sensing material for chlorophyll detection in oceans.

Integrated Multifunctional Graphene Discs 2D Plasmonic Optical Tweezers for Manipulating Nanoparticles.

Optical tweezers are key tools to trap and manipulate nanoparticles in a non-invasive way, and have been widely used in the biological and medical fields. We present an integrated multifunctional 2D plasmonic optical tweezer consisting of an array of graphene discs and the substrate circuit. The substrate circuit allows us to apply a bias voltage to configure the Fermi energy of graphene discs independently. Our work is based on numerical simulation of the finite element method. Numerical results show that the optical force is generated due to the localized surface plasmonic resonance (LSPR) mode of the graphene discs with Fermi Energy Ef = 0.6 eV under incident intensity I = 1 mW/µm2, which has a very low incident intensity compared to other plasmonic tweezers systems. The optical forces on the nanoparticles can be controlled by modulating the position of LSPR excitation. Controlling the position of LSPR excitation by bias voltage gates to configure the Fermi energy of graphene disks, the nanoparticles can be dynamically transported to arbitrary positions in the 2D plane. Our work is integrated and has multiple functions, which can be applied to trap, transport, sort, and fuse nanoparticles independently. It has potential applications in many fields, such as lab-on-a-chip, nano assembly, enhanced Raman sensing, etc.

Cell-modified plasmonic interface for the signal-amplified detection of Cucurbitacin E.

Cucurbitacin E (CuE) plays an important role in anticancer, antichemical carcinogenesis, and body immunity, etc., and the detection of its concentration is meaningful to pharmacological studies and clinical applications. However, the small molecular weight of CuE makes direct detection difficult through a surface plasmon resonance (SPR) sensor. In this work, we propose a cells-amplified signal strategy at the plasmonic interface, realizing the detection of CuE with ultra-low concentration. The seeded HeLa cells are modified onto the surface of the SPR sensor, and a small amount of CuE can lead to the remarkable morphology change of cells and the release of cell-related substances onto the plamonic interface, thus significantly amplifying the signal. Experimental results show that by using an unmodified SPR sensor with the bulk refractive index sensitivity of 2367.3 nm/RIU (RIU: refractive index unit), there no effective signal can be detected during the CuE concentration range of 0-100 nM; whereas, employing the proposed strategy, the signal for CuE detection can be significantly enhanced, resulting in a high detection sensitivity of 0.6196 nm/nM, corresponding to a limit of detection of 45.2 pM (25.2 pg/mL). The proposed cells-based signal amplifying strategy shows great potential applications in drug screening or bio-sensing to small molecules with low concentration.

MoS2-nanoflower enhanced programmable adsorption/desorption plasmonic detection for bipolar-molecules with high sensitivity.

High sensitivity and capturing ratio are strongly demanded for surface plasmon resonance (SPR) sensors when applied in detection of small molecules. Herein, an SPR sensor is combined with a novel smart material, namely, MoS2 nanoflowers (MNFs), to demonstrate programmable adsorption/desorption of small bipolar molecules, i.e., amino acids. The MNFs overcoated on the plasmonic gold layer increase the sensitivity by 25% compared to an unmodified SPR sensor, because of the electric field enhancement at the gold surface. Furthermore, as the MNFs have rich edge sites and negatively charged surfaces, the MNF-SPR sensors exhibit not only much higher bipolar-molecule adsorption capability, but also efficient desorption of these molecules. It is demonstrated that the MNF-SPR sensors enable controllable detection of amino acids by adjusting solution pH according to their isoelectric points. In addition, the MNFs decorated on the plasmonic interface can be as nanostructure frameworks and modified with antibody, which allows for specific detection of proteins. This novel SPR sensor provides a new simple strategy for pre-screening of amino acid disorders in blood plasma and a universal high-sensitive platform for immunoassay.

Ultrahigh-sensitive and compact temperature sensor based on no-core fiber with PMMA coating.

A new mechanism between the temperature sensitivity and the length ratio of PMMA coating to no-core fiber (NCF) is reported to realize an optical fiber temperature sensor with ultra-high sensitivity and compact size by PMMA-coated no-core fiber. By both theory and experiment, it is found that the sensitivity has a linear response to the length ratio of PMMA coating to NCF rather than the conventional viewpoint that it depends on the length of PMMA. Based on this conclusion and the high thermo-optic coefficient of PMMA, the temperature sensitivity is significantly enhanced as high as -9.582 nm/℃ through a simple, compact, and inexpensive sensor with 5 mm NCF and 3 mm PMMA coating. Our work opens a new avenue of a significant increase in the detection sensitivity of miniaturized fiber temperature sensors.

Ultrasensitive Biosensor with Hyperbolic Metamaterials Composed of Silver and Zinc Oxide.

We propose a hyperbolic metamaterial-based surface plasmon resonance (HMM-SPR) sensor by composing a few pairs of alternating silver (Ag) and zinc oxide (ZnO) layers. Aiming to achieve the best design for the sensor, the dependence of the sensitivity on the incidence angle, the thickness of the alternating layer and the metal filling fraction are explored comprehensively. We find that the proposed HMM-SPR sensor achieves an average sensitivity of 34,800 nm per refractive index unit (RIU) and a figure of merit (FOM) of 470.7 RIU-1 in the refractive index ranging from 1.33 to 1.34. Both the sensitivity (S) and the FOM show great enhancement when compared to the conventional silver-based SPR sensor (Ag-SPR). The underlying physical reason for the higher performance is analyzed by numerical simulation using the finite element method. The higher sensitivity could be attributed to the enhanced electric field amplitude and the increased penetration depth, which respectively increase the interaction strength and the sensing volume. The proposed HMM-SPR sensor with greatly improved sensitivity and an improved figure of merit is expected to find application in biochemical sensing due to the higher resolution.

High Q-Factor Hybrid Metamaterial Waveguide Multi-Fano Resonance Sensor in the Visible Wavelength Range.

We propose a high quality-factor (Q-factor) multi-Fano resonance hybrid metamaterial waveguide (HMW) sensor. By ingeniously designing a metal/dielectric hybrid waveguide structure, we can effectively tailor multi-Fano resonance peaks' reflectance spectrum appearing in the visible wavelength range. In order to balance the high Q-factor and the best Fano resonance modulation depth, numerical calculation results demonstrated that the ultra-narrow linewidth resolution, the single-side quality factor, and Figure of Merit (FOM) can reach 1.7 nm, 690, and 236, respectively. Compared with the reported high Q-value (483) in the near-infrared band, an increase of 30% is achieved. Our proposed design may extend the application of Fano resonance in HMW from mid-infrared, terahertz band to visible band and have important research value in the fields of multi-wavelength non-labeled biosensing and slow light devices.

Near-infrared tunable surface plasmon resonance sensors based on graphene plasmons via electrostatic gating control.

A tunable near-infrared surface plasmon resonance sensor based on graphene plasmons via electrostatic gating control is investigated theoretically. Instead of the traditional refractive index sensing, the sensor can respond sensitively to the change of the chemical potential in graphene caused by the attachment of the analyte molecules. This feature can be potentially used for biological sensing with high sensitivity and high specificity. Theoretical calculations show that the chemical potential sensing sensitivities under wavelength interrogation patterns are 1.5, 2.21, 3, 3.79, 4.64 nm meV-1 at different wavebands with centre wavelengths of 1100, 1310, 1550, 1700, 1900 nm respectively, and the full width half maximum (FWHM) is also evaluated to be 10, 25.5, 43, 55.5, 77 nm at these different wavebands respectively. It can be estimated that the theoretical limit of detection (LOD) in DNA sensing of the proposed sensor can reach the femtomolar level, several orders of magnitude superior to that of noble metal-based SPR sensors (nanomolar or subnanomolar scale), and is comparable to that of noble metal-based SPR sensors with graphene/Au-NPs as a sensitivity enhancement strategy. The FWHM is much smaller than that of the noble metal-based SPR sensors, making the proposed sensor have a potentially higher figure of merit (FOM). This work provides a new way of thinking to detect in an SPR manner the analyte that can cause chemical potential change in graphene and provides a beneficial complement to refractive index sensing SPR sensors.

Localized Surface Plasmon Resonance Decorated with Carbon Quantum Dots and Triangular Ag Nanoparticles for Chlorophyll Detection.

This paper demonstrates carbon quantum dots (CQDs) with triangular silver nanoparticles (AgNPs) as the sensing materials of localized surface plasmon resonance (LSPR) sensors for chlorophyll detection. The CQDs and AgNPs were prepared by a one-step hydrothermal process and a direct chemical reduction process, respectively. FTIR analysis shows that a CQD consists of NH2, OH, and COOH functional groups. The appearance of C=O and NH2 at 399.5 eV and 529.6 eV in XPS analysis indicates that functional groups are available for adsorption sites for chlorophyll interaction. A AgNP-CQD composite was coated on the glass slide surface using (3-aminopropyl) triethoxysilane (APTES) as a coupling agent and acted as the active sensing layer for chlorophyll detection. In LSPR sensing, the linear response detection for AgNP-CQD demonstrates R2 = 0.9581 and a sensitivity of 0.80 nm ppm-1, with a detection limit of 4.71 ppm ranging from 0.2 to 10.0 ppm. Meanwhile, a AgNP shows a linear response of R2 = 0.1541 and a sensitivity of 0.25 nm ppm-1, with the detection limit of 52.76 ppm upon exposure to chlorophyll. Based on these results, the AgNP-CQD composite shows a better linearity response and a higher sensitivity than bare AgNPs when exposed to chlorophyll, highlighting the potential of AgNP-CQD as a sensing material in this study.

Optical fiber bio-sensor for phospholipase using liquid crystal.

A cost-effective and label-free optical fiber sensor was proposed to detect phospholipase A2 (PLA2) in nM concentration. The sensor is made of an alkoxysilane-modified side-polished fiber (SPF) coated with 4'-pentyl-4-cyanobiphenyl (5CB) and self-assembled phospholipid (L-DLPC). It is found that the relative transmission optical power (RTOP) of the fiber sensor decreases due to the 5CB realignment and redistribution induced by the PLA2 hydrolysis of L-DLPC. The response-time at 5 dB RTOP variation exhibits an exponential dependence on PLA2 concentration, allowing us to detect the PLA2 by the 5 dB-response time. This detection method can reduce the detection time. Compare with the traditional copper-grid sensor, the proposed novel fiber sensor has a lower detection limit (<1 nM). Furthermore, the sensor has good repeat-ability and specificity.The sensor's RTOP variation for PLA2 detection at 1 nM is ~21 times higher than that for five other enzymes (trypsin, amylase, thrombin, glucose oxidase, pepsin) at 1000 nM and lipase at 50 nM. This confirms the sensor's excellent PLA2 specificity. The fiber sensor provides a potential way to be incorporated into micro-flow chips to quantitatively detect biological molecules in a real-time and online manner.