Corrosion Inhibition Properties of Corrosion Inhibitors to under-Deposit Corrosion of X65 Steel in CO2 Corrosion Conditions.

Under-deposit corrosion is widely present in the pipelines of oil and gas production, causing significant corrosion damage. In this paper, a novel electrochemical cathodic-polarization method was carried out to accelerate the formation of CaCO3 scale on a X65 steel surface in a simulated solution containing scaling ions. Subsequently, pre-scaled X65 steel was placed in a high temperature and pressure autoclave to conduct corrosion weight-loss experiments and in situ electrochemical measurements. The study mainly compared the corrosion inhibition behavior of four quaternary ammonium salt corrosion inhibitors, pyridinium quaternary salt (BPC), quinolinium quaternary salt (BQC), 8-hydroxyquinolinium quaternary salt (BHQ) and pyridinium (1-chloromethyl naphthalene) quaternary salt (1-CPN), in a simulated oilfield scale under corrosive conditions. The results of the weight-loss experiments demonstrated that the inhibition efficiencies of the corrosion inhibitors from high to low were as follows: 1-CPN < BHQ < BQC < BPC. The in situ electrochemical measurements showed that the immersion time and type of corrosion inhibitor had a pronounced influence on the corrosion and corrosion inhibition behavior of X65 steel with CaCO3 coating. It was also proved using both EIS and PC that 1-CPN shows the best inhibition performance in all. Lastly, the inhibition mechanism of corrosion inhibitors at under-deposit conditions was analyzed via a surface morphology observation of SEM.

First Systematic Review on Health Communication Using the CiteSpace Software in China: Exploring Its Research Hotspots and Frontiers.

Since the 1970s, health communication (HC) has attracted widespread attention from practitioners and researchers in various fields in China, leading to the production of a vast array of literature. In order to reveal the current state, popular themes, and research frontiers of HC research, this study employed the CiteSpace software to conduct a comprehensive review based on 1505 HC publications from 1992 to 2021 retrieved from the China National Knowledge Infrastructure (CNKI) database. The results demonstrated that (1) the number of HC publications has experienced an annual increase over the past 20 years, albeit with certain inverted S-shaped fluctuations and (2) the most prolific authors mainly included Wang L.Y., Zhang Z.L., and Wang Y.L., while well-known universities played a leading role in HC research in China. A significant finding was that a stable core group of authors or institutional has been not formed in the HC field. Furthermore, (3) research hotspots included health education, new media, health literacy, health information, animal husbandry and veterinary medicine (AHVM), the doctor-patient relationship, and public health emergencies. Additionally, the development of the field could be divided into four stages, indicating a significant shift in HC research from focusing on medicine and public health issues towards communication issues. Finally, (4) new research frontiers have mainly included the WeChat official account and Health China.

Rotating Machinery Fault Diagnosis Based on Improved Multiscale Amplitude-Aware Permutation Entropy and Multiclass Relevance Vector Machine.

The health state of rotating machinery directly affects the overall performance of the mechanical system. The monitoring of the operation condition is very important to reduce the downtime and improve the production efficiency. This paper presents a novel rotating machinery fault diagnosis method based on the improved multiscale amplitude-aware permutation entropy (IMAAPE) and the multiclass relevance vector machine (mRVM) to provide the necessary information for maintenance decisions. Once the fault occurs, the vibration amplitude and frequency of rotating machinery obviously changes and therefore, the vibration signal contains a considerable amount of fault information. In order to effectively extract the fault features from the vibration signals, the intrinsic time-scale decomposition (ITD) was used to highlight the fault characteristics of the vibration signal by extracting the optimum proper rotation (PR) component. Subsequently, the IMAAPE was utilized to realize the fault feature extraction from the PR component. In the IMAAPE algorithm, the coarse-graining procedures in the multi-scale analysis were improved and the stability of fault feature extraction was promoted. The coarse-grained time series of vibration signals at different time scales were firstly obtained, and the sensitivity of the amplitude-aware permutation entropy (AAPE) to signal amplitude and frequency was adopted to realize the fault feature extraction of coarse-grained time series. The multi-classifier based on the mRVM was established by the fault feature set to identify the fault type and analyze the fault severity of rotating machinery. In order to demonstrate the effectiveness and feasibility of the proposed method, the experimental datasets of the rolling bearing and gearbox were used to verify the proposed fault diagnosis method respectively. The experimental results show that the proposed method can be applied to the fault type identification and the fault severity analysis of rotating machinery with high accuracy.

Dynamic Thermomechanical Analysis on Water Tree Resistance of Crosslinked Polyethylene.

The water tree resistance of crosslinked polyethylene (XLPE) initiated by ultraviolet (UV) irradiation technique is investigated through a water blade electrode method, and the effects of the mechanism of UV irradiation crosslinking on inhibiting water tree growth are revealed with dynamic thermomechanical analysis (DMA). The accelerated water tree aging experiment shows that UV irradiation crosslinking inhibits the growth rate of water trees, and the water tree length and width is reduced with the increase of the crosslinking degree of XLPE. The DMA result demonstrates that the molecular activity of the amorphous phase in XLPE as represented by polyethylene ß-relaxation is gradually intensified with the increase of the crosslinking reaction. Combined with the fatigue mechanism of water tree growth in semi-crystalline polymers, it is suggested that the UV irradiation crosslinking reaction can significantly improve the anti-water-tree performance of linear low-density polyethylene (LLDPE). The crosslinking bond in the amorphous phase of UV-photoinitiated crosslinking polyethylene can produce a large number of cross-connected polymer chains, by which the length of fiber is obviously increased, leading to an reduced force from the micro-water beads onto the crack tip and thus decreasing the rate of the material being destroyed by micro-water beads.

Performance Assessment of a Humidity Measurement System and Its Use to Evaluate Moisture Characteristics of Wheelchair Cushions at the User-Seat Interface.

Little is known about the changes in moisture that occur at the body-seat interface during sitting. However, as increased moisture can add to the risk of skin damage, we have developed an array of MEMS (Micro-Electro-Mechanical System) humidity sensors to measure at this interface. Sensors were first evaluated against traceable standards, followed by use in a cross-over field test (n = 11; 20 min duration) using different wheelchair cushions (foam and gel). Relative humidity (RH) was measured at the left mid-thigh, right mid-thigh and coccyx. Sensors were shown to be unaffected by loading and showed highly reliable responses to measured changes in humidity, varying little from the traceable standard (<5%). Field-test data, smoothed through a moving average filter, revealed significant differences between the three chosen locations and between the gel and foam cushions. Maximum RH was attained in less than five minutes regardless of cushion material (foam or gel). Importantly, RH does not appear to distribute uniformly over the body-seat interface; suggesting multiple sensor positions would appear essential for effectively monitoring moisture in this interface. Material properties of the cushions appear to have a significant effect on RH characteristics (profile) at the body-seat interface, but not necessarily the time to peak moisture.

Microenvironment temperature prediction between body and seat interface using autoregressive data-driven model.

There is a need to develop a greater understanding of temperature at the skin-seat interface during prolonged seating from the perspectives of both industrial design (comfort/discomfort) and medical care (skin ulcer formation). Here we test the concept of predicting temperature at the seat surface and skin interface during prolonged sitting (such as required from wheelchair users). As caregivers are usually busy, such a method would give them warning ahead of a problem. This paper describes a data-driven model capable of predicting thermal changes and thus having the potential to provide an early warning (15- to 25-min ahead prediction) of an impending temperature that may increase the risk for potential skin damages for those subject to enforced sitting and who have little or no sensory feedback from this area. Initially, the oscillations of the original signal are suppressed using the reconstruction strategy of empirical mode decomposition (EMD). Consequentially, the autoregressive data-driven model can be used to predict future thermal trends based on a shorter period of acquisition, which reduces the possibility of introducing human errors and artefacts associated with longer duration "enforced" sitting by volunteers. In this study, the method had a maximum predictive error of <0.4 °C when used to predict the temperature at the seat and skin interface 15 min ahead, but required 45 min data prior to give this accuracy. Although the 45 min front loading of data appears large (in proportion to the 15 min prediction), a relative strength derives from the fact that the same algorithm could be used on the other 4 sitting datasets created by the same individual, suggesting that the period of 45 min required to train the algorithm is transferable to other data from the same individual. This approach might be developed (along with incorporation of other measures such as movement and humidity) into a system that can give caregivers prior warning to help avoid exacerbating the skin disorders of patients who suffer from low body insensitivity and disability requiring them to be immobile in seats for prolonged periods.

Enzymatic hydrolysis preparation of mono-O-lauroylsucrose via a mono-O-lauroylraffinose intermediate.

1'-O-Lauroylsucrose and 6'-O-lauroylsucrose were formed through hydrolysis of the C-6″ galactose group of 1'-O-lauroylraffinose and 6'-O-lauroylraffinose, respectively, in the presence of α-galactosidase. The enzymatic hydrolysis of 1'-O-lauroylraffinose and 6'-O-lauroylraffinose is discussed in detail. Acetic acid-sodium acetate was chosen as the buffer solution of the enzymatic hydrolysis reaction. The optimum conditions for the enzymatic hydrolysis reaction were as follows: buffer solution, pH 3.8; enzymatic time, 48 h; and enzymatic temperature, 37 °C. Under the optimal process conditions, the efficiency of α-galactosidase was ca. 82.6%. The isomers were fully compared in solubility, hydrophile-lipophile balance (HLB) values, critical micelle concentration (CMC), and thermal stability. The results showed that all lauroylsucrose isomers have similar solubilities in polar solvent, HLB values, CMC values, and thermal stabilities.

[Investigation of relationship between pregnancy induced hypertension syndrome and homocysteine, folic acid and vitamin B(12)].

OBJECTIVE: To investigate the relationship between pregnancy induced hypertension syndrome (PIH) and homocysteine, folic acid and vitamin B(12). METHODS: There were 59 cases of PIH (group A) and 60 cases of normal late pregnancy were enrolled (group B). The serum homocysteine level was detected with fluorescence polarization immunoassay (FPIA), serum folic acid and vitamin B(12) levels were detected with microparticle enzyme immunoassay (MEIA). RESULTS: There was significant difference (P < 0.05) of serum homocysteine levels between group A [(13.1 +/- 3.7) micromol/L] and group B [(10.4 +/- 3.9) micromol/L]. Although, the level of folic acid and vitamin B(12) in group A were lower than those of group B, there was no statistical differences between the two groups (P > 0.05). CONCLUSION: It was concluded that the disorder of homocysteine metabolism may play an important role in the pathogenesis of PIH, and no direct evidence to prove that folic acid and vitamin B(12) were related with PIH.