Decorrelation characteristics of transverse blood flow along an intravascular array catheter: effects of aggregation of red blood cells.

A method to measure transverse blood flow, based on the correlation between consecutive radiofrequency (RF) signals, has been introduced. This method was validated for an intravascular (IVUS) rotating single element catheter. Currently, we are implementing the method for an IVUS array transducer catheter. The decorrelation characteristics during transverse blood flow using the IVUS array catheter were investigated using computer modeling. Before this, blood was simulated as a collection of randomly located point scatterers and, by moving this scattering medium transversely across the acoustical beam, blood flow was simulated. This paper presents a more realistic scattering media by simulating aggregates of red blood cells (RBCs) as strings of point scatterers. Three configurations of aggregates of RBCs were simulated. First, aggregates of RBCs were strings with different lengths and parallel to the catheter axis. Second, the strings were with a fixed length and angles of plus or minus 45 degrees with respect to the catheter axis. Third, the strings were with different lengths and random angles ranging from -45 degrees to + 45 degrees. The decorrelation characteristics for these configurations of aggregates of RBCs were investigated and compared with point scatterers. For the aggregates of RBCs parallel to the catheter axis, the decorrelation rate became slower when the aggregate length was increased. RBC aggregations with fixed and random lengths and angles resulted in a decorrelation rate that approaches the decorrelation pattern from point scatterers. Results suggests that the presence of aggregates of RBCs will probably not affect the measurements of transverse blood flow using a decorrelation-based method and an IVUS array catheter.

Flow estimation using an intravascular imaging catheter.

Coronary flow assessment can be useful for determining the hemodynamic severity of a stenosis and to evaluate the outcome of interventional therapy. We developed a method for measuring the transverse flow through the imaging plane of an intravascular ultrasound (IVUS) catheter. This possibility has raised great clinical interest since it permits simultaneous assessment of vessel geometry and function with the same device. Furthermore, it should give more accurate information than combination devices because lumen diameter and velocity are determined at the same location. Flow velocity is estimated based on decorrelation estimation from sequences of radiofrequency (RF) traces acquired at nearly the same position. Signal gating yields a local estimate of the velocity. Integrating the local velocity over the lumen gives the quantitative flow. This principle has been calibrated and tested through computer modeling, in vitro experiments using a flow phantom and in vivo experiments in a porcine animal model, and validated against a Doppler element containing guide wire (Flowire) in humans. Originally the method was developed and tested for a rotating single element device. Currently the method is being developed for an array system. The great advantage of an array over the single element approach would be that the transducer has no intrinsic motion. This intrinsic motion sets a minimal threshold in the detectable velocity components. Although the principle is the same, the method needs some adaptation through the inherent different beamforming of the transducer. In this paper various aspects of the development of IVUS flow are reviewed.

Decorrelation characteristics of transverse blood flow along an intravascular array catheter.

In recent years, a new method to measure transverse blood flow based on the decorrelation of radio frequency (RF) signals has been introduced. In this paper, we investigated the decorrelation characteristics of transverse blood flow measurement using an intravascular ultrasound (IVUS) array catheter by means of computer modeling. Blood was simulated as a collection of randomly located point scatterers. Moving this scattering medium transversally across the acoustical beam represented flow. First-order statistics were evaluated, and the signal-to-noise ratio from the signals was measured. The correlation coefficient method was used to present the results. The decorrelation patterns for RF and for RF-envelope signals were studied. The decorrelation patterns from the RF signals were in good agreement with those obtained from theoretical beam profiles. This agreement suggests that the decorrelation properties of an IVUS array catheter for measuring quantitative transverse blood flow can be assessed by measuring the ultrasound beam. A line of point scatterers, moved transversally across the acoustical beam (line spread function), can determine this decorrelation behaviour.