A radiomics signature derived from CT imaging to predict MSI status and immunotherapy outcomes in gastric cancer: a multi-cohort study.

BACKGROUND: Accurate microsatellite instability (MSI) testing is essential for identifying gastric cancer (GC) patients eligible for immunotherapy. We aimed to develop and validate a CT-based radiomics signature to predict MSI and immunotherapy outcomes in GC. METHODS: This retrospective multicohort study included a total of 457 GC patients from two independent medical centers in China and The Cancer Imaging Archive (TCIA) databases. The primary cohort (n = 201, center 1, 2017-2022), was used for signature development via Least Absolute Shrinkage and Selection Operator (LASSO) and logistic regression analysis. Two independent immunotherapy cohorts, one from center 1 (n = 184, 2018-2021) and another from center 2 (n = 43, 2020-2021), were utilized to assess the signature's association with immunotherapy response and survival. Diagnostic efficiency was evaluated using the area under the receiver operating characteristic curve (AUC), and survival outcomes were analyzed via the Kaplan-Meier method. The TCIA cohort (n = 29) was included to evaluate the immune infiltration landscape of the radiomics signature subgroups using both CT images and mRNA sequencing data. RESULTS: Nine radiomics features were identified for signature development, exhibiting excellent discriminative performance in both the training (AUC: 0.851, 95%CI: 0.782, 0.919) and validation cohorts (AUC: 0.816, 95%CI: 0.706, 0.926). The radscore, calculated using the signature, demonstrated strong predictive abilities for objective response in immunotherapy cohorts (AUC: 0.734, 95%CI: 0.662, 0.806; AUC: 0.724, 95%CI: 0.572, 0.877). Additionally, the radscore showed a significant association with PFS and OS, with GC patients with a low radscore experiencing a significant survival benefit from immunotherapy. Immune infiltration analysis revealed significantly higher levels of CD8 + T cells, activated CD4 + B cells, and TNFRSF18 expression in the low radscore group, while the high radscore group exhibited higher levels of T cells regulatory and HHLA2 expression. CONCLUSION: This study developed a robust radiomics signature with the potential to serve as a non-invasive biomarker for GC's MSI status and immunotherapy response, demonstrating notable links to post-immunotherapy PFS and OS. Additionally, distinct immune profiles were observed between low and high radscore groups, highlighting their potential clinical implications.

The 'double­track sign': A novel CT finding suggestive of the diagnosis of T1a gastric cancer.

Effective identification of T1a stage cancer is crucial for planning endoscopic resection for early gastric cancers. The present study aimed to determine the diagnostic value of the double-track sign in patients with T1a gastric cancer using computed tomography (CT) imaging. A total of 152 patients diagnosed with pathologically proven T1a gastric cancer at The First Affiliated Hospital of Zhengzhou University (Zhengzhou, China) between July 2011 and August 2021 were retrospectively reviewed. The control group consisted of 2,926 patients with gastritis. Clinical data, including patient characteristics and preoperative CT imaging findings with gastric morphological features, were reviewed and analyzed. Out of 51 patients with T1a gastric cancer finally included, 31 (60.8%) exhibited local double-track enhancement changes of the stomach, referred to as the 'double-track sign', on CT images. In addition, four patients (7.8%) had well-enhanced mucosal thickening of the gastric wall. Of the 2,926 control subjects, none had any double-track sign and six patients (0.2%) had local gastric wall thickening with abnormally strengthened enhancement. In conclusion, a double-track sign on CT images is beneficial in the diagnostic differentiation of T1a gastric cancer.

Identification of PYGL as a key prognostic gene of glioma by integrated bioinformatics analysis.

Aim: PYGL has been reported to have carcinogenic effects in a variety of tumors. This study is the first to reveal the relationship between PYGL and the prognosis of glioma. Materials & methods: Analyzing the Chinese Glioma Genome Atlas database, the authors revealed the expression status and prognostic value of PYGL in gliomas and used quantitative real-time PCR to verify PYGL expression again. Subsequently, they used Gene Set Enrichment Analysis to explore the biological pathways that PYGL may participate in. The authors also used the tumor immune estimation resource database to explore the relationship between PYGL and tumor immune cells. Results: PYGL is involved in the malignant progression of glioma. Conclusions: PYGL can be used as a new biomarker and molecular target for evaluating the prognosis and immunotherapy of glioma.

A meta-analysis of the secondary fractures for osteoporotic vertebral compression fractures after percutaneous vertebroplasty.

ABSTRACT: To identify the risk factors of the secondary fractures for osteoporotic vertebral compression fractures (OVCFs) after percutaneous vertebroplasty (PVP).We conducted a search of relevant articles using Cochrane Library, PubMed, Medline, Science Direct, Embase, the Web of Science and other databases. The time range we retrieved from establishment of the electronic database to November 2017. Gray studies were found in the references of included literature reports. STATA version 11.0 (Stata Corporation, College Station, Texas) was used to analyze the pooled data.Fourteen studies involving 1910 patients, 395 of whom had fracture secondary to the surgery were included in this meta-analysis. The result of meta-analyses showed the risk factors of the secondary fractures for OVCFs after PVP was related to bone mineral density (BMD) [95%CI (-0.650, -0.164), SMD=-0.407, P=.001], cement leakage ((RR=0.596, 95%CI (0.444,0.798), P = .001)), and kyphosis after primary operation ((SMD=0.741, 95%CI (0.449,1.032), P = .000)), but not to gender, age, body mass index, cement volume, thoracolumbar spine, and cement injection approaches.Bone mineral density, cement leakage, and kyphosis after primary operation are the risk factors closely correlative to the secondary fracture after PVP. There have not been enough evidences to support the association between the secondary fracture and gender, age, body mass index, cement volume, thoracolumbar spine, and cement injection approaches.

Biomechanical Comparison of a New Memory Compression Alloy Plate versus Traditional Titanium Plate for Anterior Cervical Discectomy and Fusion: A Finite Element Analysis.

OBJECTIVE: To compare the biomechanical properties of a new memory compression alloy plate and traditional titanium plate after anterior cervical discectomy and fusion (ACDF). METHODS: A finite element model of the C3-7 segments was developed and validated. The C5-6 disc was removed, and an intervertebral cage made of peek material was implanted. Then, a new memory compression alloy plate composed of Ti-Ni memory alloy and a traditional titanium plate were integrated at the C5-6 segment. All models were subjected to a load of 73.6 N to simulate the head weight and 1 Nm of flexion-extension, lateral bending, and axial rotation. The range of segmental motion (ROM) and stress on the prostheses, adjacent discs, and endplates were analyzed. RESULTS: Compared with intact status, ACDF with the new prothesis and traditional titanium plate reduced the ROM of C5-6 in six directions by 95.2%-100% and increased that of adjacent discs (C4-5 and C6-7) by 4.8%-112.5%. Adjacent disc stress peaks were higher for the traditional titanium plate (0.7-4.2 MPa) than for the new prosthesis (0.6-4.1 MPa). Endplate stress peaks were the highest in ACDF with the new prosthesis (15.6-53.3 MPa), followed by ACDF with traditional titanium plate (5.0-29.4 MPa). Stress peaks were significantly lower for the new prothesis (12.8-52.3 MPa) than for the traditional titanium plate (397.0-666.1 MPa). CONCLUSIONS: The new prosthesis improved the immediate stability of the surgical site and had an elastic modulus that was smaller than that of traditional titanium plate, making it conducive to reducing stress shielding and the impact on the adjacent intervertebral disc.

Factors associated with postoperative axial symptom after expansive open-door laminoplasty: retrospective study using multivariable analysis.

PURPOSE: The aim of the present study was to investigate the factors associated with axial symptom using multivariable analysis. METHODS: The authors retrospectively assessed 249 patients treated by open-door laminoplasty. The patients were classified into two groups: axial symptom and no axial symptom group. The possible factors included demographic variables (age, sex, BMI, smoking, heart disease, diabetes, preoperative neck pain, preoperative JOA scores, preoperative NDI, course of disease and pathogenesis) and surgical and radiological variables [operation time, intraoperative blood loss, collar wear time, preoperative cervical curvature, postoperative cervical curvature, T1 slope, preoperative and postoperative C2 sagittal vertical axis (C2 SVA)]. RESULTS: The prevalence of axial symptom was 34.9% (89/249). The collar wear time, preoperative and postoperative C2 SVA were risk factors for axial symptom. A cutoff value of 22.6 mm for preoperative C2 SVA and 3.5 weeks for collar wear time predicted the development of axial symptom. CONCLUSIONS: The longer collar wear time, larger preoperative and postoperative C2 SVA were positively correlated with the higher incidence of axial symptom.

Initial stability of one-stage anterior debridement and cage implantation combined with anterior-lateral fixation by a dual screw-rod construct in the treatment of lumbosacral tuberculosis: a cadaveric biomechanical study.

BACKGROUND: Although various surgical methods are used to treat lumbosacral tuberculosis, no unified surgical approach exists. Thus, exploring an optimal operation method has substantial clinical importance. Evaluate the initial stability of a new surgical method, a one-stage anterior debridement and cage implantation combined with anterior-lateral fixation by a dual screw-rod construct, in the treatment of lumbosacral tuberculosis and provide biomechanical support for its further promotion in clinical applications. METHODS: Fifteen fresh human lumbosacral spine specimens without fractures, deformities or osteoporosis were randomly divided into intact (I), anterior fixation (AF) and posterior fixation (PF) groups. All AF and PF group specimens had subtotal resections of the L5 vertebra and adjacent discs, while the I group specimens were kept intact. Then, titanium cages were implanted in the surgical site and a dual screw-rod construct was fixed anterior-laterally in the AF group, while the PF group specimens were fixed posteriorly with only the dual screw-rod construct. Mechanical tests were conducted for initial stability evaluations. RESULTS: The load at the maximum displacement (5 mm) or rotation angle (5 °) was less for the I group specimens than for the AF and PF group specimens in all directions (P < 0.05). The load at the maximum displacement (5 mm) was greater for the AF group specimens than for the PF group specimens in flexion, lateral bending and axial compression (P < 0.05) and lower than in the PF group specimens in extension (P < 0.05). In torsion, there was no difference between the loads in the AF and PF groups at the maximum rotation angle (5 °) (P > 0.05). CONCLUSIONS: The proposed surgical approach can provide better immediate stability than anterior debridement with posterior dual screw-rod fixation in the treatment of lumbosacral tuberculosis in flexion, lateral bending and axial compression.

Design and preliminary biomechanical analysis of a novel motion preservation device for lumbar spinal disease after vertebral corpectomy.

OBJECTIVE: To design a novel prosthesis, a movable artificial lumbar complex (MALC), for non-fusion reconstruction after lumbar subtotal corpectomy and to evaluate the stability, range of motion and load-bearing strength in the human cadaveric lumbar spine. METHODS: Biomechanical tests were performed on lumbar spine specimens from 15 healthy cadavers which were divided in three groups: non-fusion, fusion and intact group. The range of motion (ROM), stability and load-bearing strength were measured. RESULTS: The prosthesis was composed of three parts: the upper and lower artificial lumbar discs and the middle artificial vertebra. Both the MALC and titanium mesh cage re-established vertebral height, and no spinal cord compression or prosthesis dislocation was observed at the operative level. Regarding stability, there was no significant difference in all directions between the intact group and non-fusion group (P > 0.05). Segment movements of the specimens in the non-fusion group revealed significantly decreased T12-L1 ROM and significantly increased L1-2 and L2-3 ROM in flexion/extension and lateral bending compared with those in the fusion group (P < 0.05). Regarding load-bearing strength, when the lumbar vertebra was ruptured, there was no damage to the MALC and titanium mesh cage, but the maximum load in the non-fusion group was larger (P > 0.05). CONCLUSIONS: Compared with titanium cages, the MALC prosthesis not only restored the vertebral height and effectively preserved segment movements without any abnormal gain of mobility in adjacent inter-vertebral spaces but also bore the lumbar load and reduced the local stress load of adjacent vertebral endplates.